Problemas ao im Internet com VMware

Similar Questions

• Problem with the profile of home - com.vmware.profile.hostCacheConfig.EsxcliError

  I get a weird when error checking of the compliance of a profile of the host, I me com.vmware.profile.hostCacheConfig.EsxcliError, and the host is in an unknown state.
  

  
  

  No matter what I do I can not erase it. Even the de-selection of all sections makes no difference.
  

  
  

  The source a destination hosts are identical at the hardware level, and they are the two 5.5 ESXi.

  
  

  Any help or advice would be appreciated. Thank you.

  Well Yes, now that the DNS blip is far it seems to have been fixed. So, as usual, the lesson is - make sure DNS front and rear working professional.

• Problem downloading the components of VMware Workstation

  Hi, I use VMVware Workstation v 7.1.2 build 301548 on a Windows 7-64 bit SP1 Workstation.

  I have no problem with my Internet Explorer to connect to the Internet via the proxy (ISA 2006) on port 8080.

  If I try to install VMware tools in a new virtual machine or if I try to "Download all components now" I get only a popup with

  -VMware Workstation connects to the update server

  -Update Server: https://softwareupdate.VMware.com/CDs (which is no problem for my Internet Explorer to this site)

  -Proxy server: http://visa06:8080 (which is correct)

  -State connection: connection...

  But it never ends. Any log file to check?

  On my ISA Server I see the following:

  ERROR_SUCESS 0X0

  0X800074E21 FWX_E_ABORTIVE_SHUTDOWN

  No idea what is the problem?

  If you have a licensed copy of connection workstation to your account and download Vmware WS 7.1.3 fo your Linux or Windows platform.  For Linux, download the full .bundle file.  It includes all the tools.  If this isn't the case, you don't need to download an eval copy and leave there a license.

  Marty

• Unable to connect to the internet using my cable broadband from sky. He said that there is a problem with your internet connection.

  original title: connection to the sky

  Hi I have a dell Inspiron mini and when I put my sky broadband cable said inside connected to the internet, but when I opened a page it says there is a problem with your internet or something.i have also the wireless network connection, but I think one of my kids messed with the parameter as , I can't use the wireless setting now.so if anyone has any answers I would be grateful.

  Hi Kerry,

  I would recommend contacting Sky support with their internet service:
  http://www.sky.com/HelpCentre/contact-us/
  One thing, you can try on your own is following the instructions in this Microsoft article and running the Fixit tool:
  http://support.Microsoft.com/kb/299357 
  I hope this helps.

• When I start my computer I get the message "Windows Live Mesh, there might be a problem with your internet connection make sure computer connection and try again, I run Windows Vista"

  I run Windows Vista.   Recently on commissioning the first thing that appears on my screen is a 'Windows Live Mesh' message, "there could be a problem with your internet connection.

  connection.   Ensure that the computer is connected to the internet and try again".

  My computer is connected to the internet, and it works very well.   How can I get rid of this annoying message.

  I tried all means to find this file on my computer, but it does not appear to be

  Can you help me please

  Mike Gray

  Hello

  
  Were there any changes (hardware or software) to the computer before the show?
  
  Perform the check and the boot if the problem persists.
  
  To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  
  Note: Follow step 7 to reset the computer to start as usual after the boot process.
  
  http://support.Microsoft.com/kb/929135 
  
  Hope that helps.

• Problems with WMC Internet TV (Beta) in Vista 32-bit last month.

  Okay, so for those of you who have read my previous posts on Windows Media Center related problems involving the Internet TV beta edition, you know, I've had difficulties to find a fix for a specific problem where Internet TV will not download and gives the error, "No valid, impossible to launch Application" «...» »

  So a few weeks back I found a good deal on a new material and thought I would upgrade my system to a dual core to Hexa core with a new motherboard with AMD 870/850 chipset.  I added some ram DDR3 and low and behold, when I ran my system I have not had any unexpected problems when you use Windows Media Center to which has been about a month now.  That is, until today!  When exactly the same problem happened when I look one online using WMC Internet TV (beta) news.  The error just after I saw a report, at the start of the Internet TV to connect to the next story in the list after I was watching the story I wanted to.  I clicked on the button back in the upper left corner and the second that I did, my screen instead of going back to the next menu, frozen, and then the blue circle came for about 10 seconds.  I was wondering what was the program, and then the exact error even I had before with my old dual core card mother system returned to the top on the screen and it (until) worked normally.

  Conclusion... no matter what Internet TV (beta) is when it is the transfer of information from the internet to the computer, is likely to damage the hardware.  The solution is to buy a new system, which I strongly think that Microsoft should pay back stop (especially when the review is pretty well the whole computer) when it occurs.

  Except of course swaping on hardware is just one of a few ways to fix the same problem, which I see no answers for in all other positions on the issue.

  Hi JohnDR,

  1. What is the full exact error message that you receive?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can someone help me with my problem on the Internet connection sharing?

  I have a LAN wired connection but no wifi capability. I managed to share the internet connection from my pc to my phone by using the "Internet sharing connection" using the usb cable and the first day, it works fine and I can use my phone for internet access. Unfortunately, the 2nd day I can't connect and it says "internet is not available.

  I am currently using windows 7. I hope some of you can help me thanks.

  

  It is on my pc and it says now no internet access. I enabled the "allow other users of the network to connect to this computer" as what I said the first day, it works very well.

  Hello Fritz,.

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the issue.

  This problem may occur because of corrupted network drivers or incorrect network settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, use method 2.

  Method 2:
  Use the steps described in this article and check the issue.
  Reference:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1

  Additional information:
  Using ICS (Internet Connection Sharing)
  http://Windows.Microsoft.com/en-us/Windows/using-Internet-connection-sharing#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Problem connecting to internet wireless (Hp elitebook 8440p, windows 7 Professional)

  Hello

  So this problem seems to be quite common, but in a different way. I read a lot of forums where users when it is unable to turn on their wireless option (via the button on the keyboard) However, I turn it works freely. I have full access to the internet with an ethernet cable, but am unable to connect to wireless networks. I'm a student and my University offers wifi to all buildings of the University, but even though I can access this wifi on my laptop, I can't on my laptop.

  I know almost nothing about network connections and Internet / network adapters so I'm sorry if this is a silly question. Please let me know if there is anything I can do to connect to wireless networks.

  Thank you
  Tom Rowland

  Hello Tom,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem can occur because the parameters or corrupt network drivers.

  I suggest you to launch network troubleshooting and check if that helps.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, follow the steps provided in this article, and the check.
  Reference:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Problem connecting to internet 'network unidentified. "

  Original title: remove corrupt card WIRELESS

  Problem connecting to internet. My current tinkering is to disable the Intel network card, reactivate, and I connected. However, when I restart, the change is lost and the network icon shows no access, and offers connections that do not work. I guess that somewhere in the registry is the "unidentified network" below.

  The network page shows the connection contains two networks, the right most "unidentified network".  I tried to review or delete this without success.

  When I connect as long as user admin, the connection is present and working.

  How is - a change the connections?

  Hello

  Please contact Microsoft Community. I appreciate your efforts to solve this problem, I'll probably help you solve this problem.

  To better understand the issue, I would need more information on your side.

  1. What is the brand and model of the computer?
  2. You are using a wired or wireless network?

  This problem might have occurred because of these reasons:

  1. Corrupt drivers.
  2. Incorrect settings.

  Try the steps listed here:

  Method 1:
  I suggest you to perform network troubleshooting and check if it helps. It will help resolve common network connectivity errors.

  Network convenience stores
  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

  Method 2:
  If the problem persists, I suggest to try the procedure described in the following article and check if it helps.

  Why can't connect me to a network?
  http://Windows.Microsoft.com/en-us/Windows/cant-connect-to-network#1TC=Windows-7

  Check out the link for more information.

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Problems with our internet connection

  Hello, I have a all in one HP touchsmart PC (running windows 7), and he has problems with our internet connection. I dot know if it is in the right section, but this seems to be the best in the class.

  The rest of my house to connect to our router fine (iphone, iPad, computer laptop) except this PC. I CAN connect to the router, but 5 minutes or later, he has a X red on the connection and said "the settings saved on this computer do not match the requirements for the network" I looked everywhere online for this, but it remains stubbornly disconnects every time.

  I tried to delete the network and try again, but he still has a red X and the message more each time. I tried to connect and Ethernet cable, still no luck. I am very desperate to solve this problem, because it's what I use for games. Can someone help me please? It would mean the world to me if someone could help me solve this problem.

  If you don't mind keeping this Ethernet cable connected, you might have a solid connection if you come to turn off the wifi connection completely and rely only on the cable.

  Here's how:

  1. Press on + R to display the run box, type ncpa.cpl , and then press OK.
  2. Right click on the wireless network connection and choose disable.

  That's all.  You can always reactivate if you wish.

• Problem in the Internet by Wi - Fi connection sharing

  I used programs such as Virtual Wi - Fi and Connectify in the past to share my Internet connection. But recently, when I tried to do the same thing, I can't do it. My default internet connection is via ethernet. When I connect it to my laptop, it detects just like a LAN, then I again connect to the internet by entering the user name and password. So after you connect to the Internet, I'll have two connections, a LAN without internet access and others with access to the Internet.

  Now to share my Internet via Wi - Fi, which connection choose to allow this connection for internet sharing tab of the properties of share?

  Also when I install Connectify, Internet is disconnected. When I uninstall it, his work.

  I tried Virtual Wifi, its creation of a wifi connection to share my internet and I am able to connect to it, but the internet does not work.

  And then I tried to create ad - hoc wireless network, after giving a name, etc., there is no option to enable internet sharing on this network that usually does.

  How to solve this problem?

  Hi pradeepviswav,.

  Method 1
  Try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2
  Try the following steps to set up adohc network.

  Set up a computer-to-computer (ad hoc) network
  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network
  
  Using ICS (Internet Connection Sharing)
  http://Windows.Microsoft.com/en-us/Windows7/using-ICS-Internet-connection-sharing
  
  Method 3
  Use one of the Internet by Wi - Fi connection sharing programs. If you use connectify, try the steps from the following link:
  http://support.Connectify.me/home

• obsolete since com.vmware.ui.lists.ColumnSetContainer Sdk 5.5 not supported in HTML plugins. that the way to view the list of objects

  com.vmware.ui.lists.ColumnSetContainer obsolete since the Sdk 5.5 not supported in HTML. plugins that display in the object list. I tried the sample HTML plugins. ChassisA and chassiB but, but the workspace object is empty

  
  

  Looking forward to a quick response.

  
  

  Thanks in advance.

  Kind regards

  Rouault.

  The plugin.xml samples of chassisA or chassisB show how to set the object lists without using the deprecated ColumnSetContainer.  Make sure that you follow closely these samples and it should work for your own plugin.  Otherwise, you will need to provide a way for us to reproduce your problem. Thank you.

• the dynamic types are not picked up by - ("com.vmware.library.vcaccafe.asd.customresources") .getAvailableInventoryTypes

  Try to get our host vCAC recognize/import the type Dynamics/object classes and create custom resources. The call to action 'createCustomResourceFromInventoryType '. The inventory of the available dynamic types is not returned. As vCO using test research of the api; I see the DynamicTypes under the namespace created for them. Of course, they exist in the inventory of vco under dynamic types. Test the code below:

  type host = vCACCAFE:VCACHost

  var inventoryTypes = System.getModule("com.vmware.library.vcaccafe.asd.customresources").getAvailableInventoryTypes (host);

  for each (var inventoryType in inventoryTypes)

  {

  If (inventoryType.GetName (). IndexOf ('case'). = -1)

  System.log (inventoryType.GetName ());

  }

  Basically just get returned undefined. It doesn't seem like a problem of vCO. It seems that just vCAC is unable to recognize the dynamic types.

  Have had problems with vCAC and DT vCO plugins in the past and have tried several permutations of plugin removal/relocation, (KB2003386) including the file, restart the server and delete Configurator package & dar and then reload. These versions using:

  DynamicTypes 1.0.0.1951696

  vCAC 6.1.0.2073620

  vCAC Infra 6.1.0.2040915

  something stupid in the end... Turns out be the default vCO server which is the embedded server vCO in vCAC. Replace that in the Red hight of the vCO uses the vCAC org - and it's good.

  

• Messages of com.vmware.vcHms repeated to install vr2c - firewall.vib

  Hi all

  Current running vSphere vCenter 5.5, 5.5 and 5.8 SRM.  Whenever a host goes in or out of maintenance mode, we see a facility that goes from "com.vmware.vcHms."  Looking at /var/log/esxupdate.log I see a message indicating a connection in the replication WILL:

  esxupdate: downloader: DEBUG: download from https://a.b.c.d:8043/VIB/vr2c-firewall.VIB ...

  What is also happening on the Wan, and it is not desired.

  Any ideas on how to prevent that from happening on the hosts that do not participate in SRM or vSphere replication?

  Ben

  Hello

  Esxupdate log clearly indicates that he uses for proxyurl vCenterServer.FQDN:80 when you download the vib.

  Can check you the connectivity between the host problem and vCenterServer.FQDN:80?

  Kind regards

  Martin

• java.io.NotSerializableException: com.vmware.vcloud.sdk.Task

  Hello

  I have a workflow creates a task waiting because it has the performance to help

  trigger = System.getModule("com.vmware.library.vCloud.common").createEndOfTaskTriggerForTask (task);

  and then a workflow element "event pending."

  Unfortunately, the workflow is now stuck in State "waiting sign" and I see the following exception which crosses the catalina.out app-server

  INFO: Response - <? XML version = "1.0" encoding = "UTF-8"? >

  " < task xmlns =" " http://www.VMware.com/vCloud/v1.5 "status = 'success' startTime ="2014-08 - 07 T 15: 25:29.853 + 02:00"serviceNamespace ="com.vmware.vcloud ' operationName = operation"vappUpdateVm"=" updated Virtua "

  "Machine node1 (f088e966-1a17-4d46-99ea-2395c3f3a618) l' expiryTime =" "2014-11 - 05 T 15: 25:29.853 + 01:00" endTime = "2014-08 - 07 T 15: 25:36.623 + 02:00" a cancelRequested = "false" name = 'task' id = "urn: vcloud:task:c2e0".

  "" " b564-d7f8-468f-b602-f9e8ee495c44" type="application/vnd.vmware.vcloud.task+xml" href = " https://VCD.He.foobar.info/API/task/c2e0b564-d7f8-468F-B602-f9e8ee495c44 "" xmlns: xsi = " http://www.w3.org/2001/XML "

  -L'instance of the schema "xsi: schemaLocation =" http://www.VMware.com/vCloud/v1.5 http://vcd.he.foobar.info/api/v1.5/schema/master.xsd' > .

  "" < type="application/vnd.vmware.vcloud.vm+xml owner" name = "Node1" href = " https://VCD.He.foobar.info/API/vApp/VM-f088e966-1a17-4d46-99ea-2395c3f3a618 "/ > "

  "" < user type="application/vnd.vmware.admin.user+xml" name = "vco" href = " https://VCD.He.foobar.info/API/Admin/user/777db7f3-1f41-4934-85A4-346efd78a8c1 "/ > "

  "" < type="application/vnd.vmware.vcloud.org+xml organization" name = 'Production' href = ' https://VCD.He.foobar.info/API/org/c594d7a6-2c9b-4853-b0d0-74bdb107e23c "/ > "

  < details / >

  < / task >

  15:41:52.195 07-08-2014 + 0200 [1c47251c586f3e4a7ef329bcdc4da3b9abbfa3d46eda3164d3ffd7537285b3.data] ERROR {c.becker:Wait for a task: 508080808080808080808080808080809980808001266312685778e677578588f:f}

  { f808081476970030147b0a5347a00ae} [DiskStorageFactory] Disk writing of https://vcd.he.foobar.info/api/task/c2e0b564-d7f8-468f-b602-f9e8ee495c44 failed:

  java.io.NotSerializableException: com.vmware.vcloud.sdk.Task

  at java.io.ObjectOutputStream.writeObject0 (unknown Source)

  at java.io.ObjectOutputStream.defaultWriteFields (unknown Source)

  the impossible (unknown Source)

  at net.sf.ehcache.Element.writeObject(Element.java:835)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)

  at java.lang.reflect.Method.invoke (unknown Source)

  at java.io.ObjectStreamClass.invokeWriteObject (unknown Source)

  at java.io.ObjectOutputStream.writeSerialData (unknown Source)

  at java.io.ObjectOutputStream.writeOrdinaryObject (unknown Source)

  at java.io.ObjectOutputStream.writeObject0 (unknown Source)

  at java.io.ObjectOutputStream.writeObject (unknown Source)

  at net.sf.ehcache.util.MemoryEfficientByteArrayOutputStream.serialize(MemoryEfficientByteArrayOutputStream.java:97)

  at net.sf.ehcache.store.disk.DiskStorageFactory.serializeElement(DiskStorageFactory.java:405)

  at net.sf.ehcache.store.disk.DiskStorageFactory.write(DiskStorageFactory.java:384)

  to net.sf.ehcache.store.disk.DiskStorageFactory$ DiskWriteTask.call (DiskStorageFactory.java:485)

  to net.sf.ehcache.store.disk.DiskStorageFactory$ PersistentDiskWriteTask.call (DiskStorageFactory.java:1088)

  to net.sf.ehcache.store.disk.DiskStorageFactory$ PersistentDiskWriteTask.call (DiskStorageFactory.java:1072)

  at java.util.concurrent.FutureTask.run (unknown Source)

  to java.util.concurrent.ScheduledThreadPoolExecutor$ ScheduledFutureTask.access$ 201 (unknown Source)

  to java.util.concurrent.ScheduledThreadPoolExecutor$ ScheduledFutureTask.run (unknown Source)

  at java.util.concurrent.ThreadPoolExecutor.runWorker (unknown Source)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (unknown Source)

  at java.lang.Thread.run (unknown Source)

  Does anyone has an idea what is the cause?

  We use vCO 5.5.1 and the workflow even worked before on a different node with the same version - we just moved by export of package and it imported into the new facility.

  From what I recall, it is a known problem with the vCD plug-in that was resolved with a technical preview that was posted on the document tab.