problemi lettura DVD

Similar Questions

• problem burning dvd of the project.

  problem burning dvd of the project.  can't burn to dvd, and when I burn to file, it says it works but when I check in the folder there is nothing there.

  tommyr

  What version of Premiere Elements and on what operating system works - it?

  If version 13/13.1

  a. do it burn to disc with and without preference Intel HD Graphics 2000 or greater disabled... see Edit Menu/preferences/general.

  b. make sure that your version of video graphics card is up-to-date according to the web site of the manufacturer of the card or the computer manufacturer

  Please review, study and provide more information. Then, we will decide which then founded on results details in your response.

  Thank you.

  RTA

• Problem with DVD/CD-RW on a P10 with XP home SP2

  Satellite P10 804 Windows XP Home SP2.
  When I use my DVD - RW to write CDs (I'm not sure about only read) DVD - RW then won't recognise a DVD until I rebooted the machine.
  Of course, he is stuck in a kind of internal mode.
  How can I fix?
  TFAI

  Hi wizzrince,

  have you checked if the Toshiba homepage provides a new firmwareupdate for your DVD player? It could be that the problems will be solved after an update!

  Go to http://eu.computers.toshiba-europe.com

  then support & Downlad - driver update
  or see if you have a player of 3rd party manufacturer and google for the site of the manufacturer.

  Bye Bob

• Problem reading DVD and CD - RW on the Satellite 1800 412

  HI -.

  My laptop has recently stopped playing all DVD and CD - RW - ordinary CD work fine, but when I try to play a DVD or a CD - RW it whirs for a while, then I get the message "Windows cannot read this disk. The disc may be damaged, or it could be in a form that is not compatible with Windows.

  I use a Satellite 1800-412, Windows XP (home edition) Service Pack 2, and the DVD drive is a SD-C2502.

  I watched the updates of the firmware of my drive to http://www.toshiba-europe.com/storage/index.asp?nav=HOM&page=HOM&frame=home as this is often recommended for problems of this kind on this forum - but not all are available.

  Any suggestions?

  Thanks much :-)

  Hello

  I read on some sites that doesn't update the firmware solves this problem.
  I recommend you to remove the drive from Device Manager.
  After restarting again the operating system should recognize the drive again. Perhaps this procedure will help you solve this problem.

  Concerning

• Problems playing DVD on Equium L40 - 156

  Hi all
  Mobile complete beginner here, really need help from you guys, the problem I have is in dvd playback in Windows Media player 11 is slow slow and out of sync.
  Toshiba DVD player gives this error: "Modules needed for this application is (are) missing;" If the application restart does not resolve the problem please install the app.
  Windows Media Center gives this error: "the files needed to display video are not installed or are not workin properly, please restart WMC.or you restart the computer,
  Called Toshiba helpline today and felt shocked by the response of women, first use the recovery disc.
  lose all the work i have put or 'buy' an other DVD such as Power DVD player online!
  Still lost for words to make things worse, I'm a Virgin full vista and find my way around the interface
  is not helping my case at all.

  PS: Really happy with the product, outside this niggle.

  Thanks in advance

  Kevin

  Hi you can try and download the codec divx http://www.divx.com/divx/windows/codec/ here who can help with reading problems

• Problem writing DVD SD 6112

  OK, my DVD burner in my notebook SA30-404
  seems to be only able to write some
  really not expensive DVD-media brands.

  Where can I find which DVD, it will burn at?
  I've already bought two piles of 25 discs
  for nothing, because they do not work...

  Supported dvd-brands and media or types
  aren't anywhere to be found in the documentation.
  "use only dvd media supported by toshiba."
  YES THEN? WHERE ARE THEY?
  Really stupid if you ask me.
  Cost us a lot of energy and time and money wasted.

  Hi jult

  Media supported by Toshiba are probably tested media and they should be available in writing without any problem. Check this http://www.tdk-europe.com/index.php?id=34&sa_from=56&WYSESSID=pecthjsutge5g7 hup5t99epib1.
  I can really recommend to use.

  You are not required to use the media. I use just the TDK media for a long time and I am very satisfied. Have two cell phones and two of them have no problem to burn DVDs at all.

  Good bye

• Satellite P205D-S7802: disk problem CD/DVD; driver damaged or missing

  Hello

  DVD unit has not recognized by the operating system.
  When I open my computer the only display unit is C, there is no unit D.

  Then I go to the Device Manager to check it out, and I noticed that the DVD unit has problems, then I open the properties, and the error message is:
  'HL-DT-ST DVD RAM GSAT20N ATA DEVICE.
  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing.

  First I thought it was a hardware problem, but I introduced the disc of windows vista at startup and the unit read it very well. Then I choose driver update of Device Manager and update told me that the best driver is already installed for the device.

  I tried to replace the files .sys and .info for CD-ROMs, but nothing is happening.
  What is happening, please help, is urgent I need to use my dvd device.

  Kind regards.

  Try this:

  Remove the drive from the Device Manager list CD/DVD
  access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  This is described here in the article MS knowledge base:
  http://support.Microsoft.com/kb/270008/en-us

  Check it out!

• Problems burning DVD with my Satellite L350D disc - 20 d

  Hello

  I have problems with burning DVDs on my dvd recorder in computer laptop satellite L350D-20 d

  > Drive 1 - Info: TSSTcorp CDDVDW TS - L633A TO03 (f) (ATA)

  I'm trying to update my firmware from here:
  http://www.x-drivers.com/catalog/bios_firmware/optical_drives/companies/Samsung/models/TS-L633A/index.html

  But even the TO03 version does not...
  I only see message saying drive Cant find Suisable or Drive not suported ect ect...

  I've been try loking for simple drvier but it looks like there is not no lol

  Hello

  Don't you know that the use of the incorrect firmware or not is not compatible would be detrimental to your CD/DVD drive?
  You should only use the firmware provided by Toshiba.

  I checked the page European driver of Toshiba and found 6 different firmware updates.
  There are updates for the reader:
  TS-L633P, TS-L633A DVRTD08A, DVRTD08L, TS-L632P TS-L632H

  You got the message because it seems that you used the wrong firmware or is not compatible!

  So if you want to Flash the firmware using the Toshiba files European page:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  by the way: some disc can cause some problems if different test types of disks from different manufacturers.

• S1800 problem - 412 DVD (unrecognized DVD movies)

  I have problem with my DVD Rom (Toshiba DVD rom SD - C2502). the problem that this Player recognizes not the only DVD movies that area code are compatilbe. However, it recognizes DVD burned, but also ordinary CDs

  [Edited by: admin April 30 05 09:09]

  Hello

  Please see http://www.toshiba-europe.com/storage/index.asp?nav=HOM&page=HOM&frame=home for firmware updates available for your car!

  It sounds confusing, because normally, it's the opposite!

  Tok

• Problems with DVD/CD-RW on Satellite Pro M series

  After searching the Forum questions / answers, it seems that many users have problems with the carpet * a 841 s UJ which is equipped with several types of Toshiba portable computers and I wonder why someone from Toshiba has not been able to intervene and to produce a final solution.

  In my case, I can not format a CD - RW or a DVD + RW because the message "D:\ is not accessible" and also "incorrect function".

  If DLA is selected in properties, can be as much as to be shown to a format selection window, but "Format failed due to general failure" happens.

  Toshiba installation CD will work OK (I did this several times after losing data on the hard drive) but the writing seems to be beyond the capacity of the disc.

  Does anyone have any suggestions?

  BTW, the deletion of "Upper and Lower Filters" registry that I have seen offered as a solution will not work because there is only one entry for low filter - no higher.

  You try to format the two supports using Windows option or using an application like Nero?
  I can't imagine that there is a serious problem with ODD. Test it with Nero. I'm sure it will work properly.

• problem HP DVD RAM UJ892

  Product name : HP Pavilion dm4 Notebook PC (1204TU)

  OS : Windows 7 Ultimate 32 bit Service Pack 1

  Problem :

  HP DVD RAM UJ892

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Hello

  Try to follow the procedure at the title of the subheading "Let fix me it myself" on the link below to delete the upper and lower filters and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  Kind regards

  DP - K

• Problem with DVD - ROM SD-C2402 (DVD multisession)

  Hello

  I have the following problem: I recorded a DVD in different stages (multisession) with Nero 6, but I can read only the first session on my laptop (Windows 98SE). On the other hand, I have no problem with multisessions CD

  Could you help me in this case?

  Thank you

  John

  Hello

  I m not 100% sure, but I think that it s a problem with the burning software and/or the media. I found information there are many problems with playback of the files after burning the multisession DVD-R, + R (Win98SE). In my opinion, you should try to burn DVDs on media RW multisession.

  Good bye

• Problem reading DVD (SD-R6112) on the Satellite P10 804 under Xp Pro SP2

  My Toshiba DVD SD-R6112 (P10-804) now reads no DVD-r it just to burn with Nero 6.6
  The sysmtoms/anamnesis is therefore
  (1) it used to work fine. That is, that I never had a problem with playing on the P10 DVD, that I burned on the P10
  (2) DVDs burned before (before a few weeks ago) on the P10 continues to be readable on the P10
  (3) BUT DVD burned recently (5 or 10 last burned on 2 different types of media and two different burners) can be read in the drive of P10. The DVD is not yet recognized - it sometimes changes shape explorer DVD - RW CD - R, but that's all. No file, no nothing.
  (4) these same (unreadable by P10) DVD is very well played on two other DVD players I have (Freecom USB and divx standalone player). The drive can read the DVD (USB Freecom) CDFS file system reports, no free space (Nero 6.6.0.14 was said to not to allow future sessions) and all appear normal.

  The DVD driver is Microsoft 5.1.2535.0 1/7/2001. The DVD 1031 firmware revision.

  Nero was the only program running when the DVD is burned (no file to add). The verified OK after burning DVD.
  I can't find an update of the firmware on the Toshiba site so I'm a little stuck on what to do next
  Any ideas?
  TFAI

  Hello

  I read in several journals, computer and on some sites that not all drives are compatible with all media. Sometimes, readers cannot read the media burned because of the 3rd party software that prevents access to the media or files.
  Generally, it is not easy to say why some readers read and write media and some readers cannot handle the same media. There are many factors.

  Sometimes, the firmware update will help you resolve problems with reading or writing.
  I found this SD-R6112 page with a driver for this device and the latest firmware version.
  http://www.Toshiba-Europe.com/storage/PDL.asp?page=PFW&NAV=RSC_PDL&model=SDR6112&PTYPE=D VDRECSL

• Satellite L20: Problem reading DVD - not synchronic sound and image

  Hi, I have a toshiba satellite L20 1.4 GHz CPU, 512 MB of ram which is only 4 months old. The problem I have is that when I try to play a DVD the image is nervous and the sound is still slower than the picture and can't seem to catch up with her. I have updated all drivers that needed updating, tried to change the video settings and tried different DVD software but it makes no difference.

  I've only tried the DVD a few weeks ago so I think it was always like that, it seems to play CD OK, although he struggles a little bit a few times when you start playback of the disc if I move the cursor.
  Does anyone know if this can be cured or I have to send again.

  Hello

  This problem appears on the original DVD's?
  I know that a similar problem could occur with some movie files or ripped DVD s.
  In this case the software that was used for the DVD copy was responsible for these issues. Sometimes after installing some codex, the problem has been resolved.

  I heard that this show on the Windows Media Center Edition has been resolved by updating the MPEG Encodeder.
  Try to update this application.

• Unable to read or write a CDR/RW but it is [b] no problem reading DVD [/ b].

  Feature: DVD/CD-RW-drive
  Satellite 2410 DVD_ROM_SD-R2212
  CD reading and writing worked correctly in the past.
  Device looks o.k, device drivers seem to be installed correctly.
  But the CD is reported as"unknown", "unknown datasystem. (User-burned CDs as well als proffessional CDs as for example the product recovery CD - Rom)
  The DVD are properly executed. We also have access to the data files as a DVD (4 G).
  No idea what to do?

  Hello

  You can differ if it is hard or software problem when you perform a full recovery. After that your S2410 recovery is to default settings and should work fine unless your CD drive is broken!

  If the CD drive is damaged, you must contact a Service partner and they must check that they drive!

  Good bye