Problems connecting to Vbox image using portforwarding

Similar Questions

• Problems connecting to the internet using the wireless network connection

  I can't connect to the internet using my wireless network connection. I had made the diagnosis and he stated that "the DHCP is not enabled for the wireless network connection. I had checked the DHCP, but it has been activated!... Someone would give any suggestion for me to solve the problem?

  Open the run command box by pressing Windows key + R, type services.msc and press enter . Search The Client DHCP and check if it is enabled or disabled. If disabled then turn it on and see if the problem still persists or not.

  Open the run command box by pressing Windows key + R, type cmd , and press enter . At the command prompt, type ipconfig/all and press ENTER. Now, check the IP address, default gateway, DNS etc. If you find all the information is correct, but you cannot yet access the Internet so if you connect the wireless network is secure or not. To determine the glance to the wireless network icon in the taskbar, then click on it. It will show you the available wireless networks. If there is a "yellow shield" present on the network icon, the network is not guaranteed, if there is no "yellow shield" does while the network is secure. In a secure network, you might have a "network security key. In this case try to disable the 'Network security key' option for this network. To do this:

  Open Control Panel , click network and Internet , click network and sharing Center , click manage wireless networks on the left.

  In the list select the wireless network and do a right click, select Properties, Security disable tab all options that is, in security type do not select no authentication (Open) and to the type of encryption , select none . You can also activate the automatic connection and SSID settings to further enhance connectivity, on the connection tab, click to select the "connect automatically if this network is in range " and "check boxesto connect even if the network is broadcasting his name (SSID) .

  For more information click here and see how you can determine whether a network is secure or not.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-know-if-a-wireless-network-is-secure

  If the problem still persists, then check your firewall settings and make sure that the firewall is not blocking your Internet connection. Some software Antivirus has a built-in firewall and they block by default all unknown connection to the tightening of security.

  Try to restore Windows Firewall default settings. Open Control Panel click on network and Internet , click system and security , click Windows Firewall , click default settings .

  Hope this will help. Thank you.

  Arup Ratan Paul

• Problems with a background image using as a model in gradient mesh

  So, basically, I am DETERMINED to learn how to use the gradient in 5.1 mesh.  I tried to do this well known exercise of red pepper (I will give the URL if someone did not.) Everything was fine until I actually tried to use the jpg background pepper itself in mode plotted as a template. The idea is to pick up the colors of the model of the pepper and then use them as color gradient mesh. No matter how I tried to make fool that just would not work. Here is a copy of a post that someone else is on this exact issue in 2012:

  If you are working on a gradient mesh and use image model as a guide, you want to work in the outline preview, so you can see the art underlying to determine wht you establish and also it allows then to use the Eyedropper to sample the color of the actual photo, so it can be translated to the mesh and you can simply switch to preview mode to check your progress.

  Very handy when you are working with gradient meshes if you use and which underlies the model to translate into art.

  (I can find the author and the URL for the quote if necessary)

  That sounds good, but sampling of the color of the photo and then actually use it on the mesh gradent points just don't seem to work for me. If they did the job for the tutorial of pepper, then there clearly must be a way! But I was not able to find it, and I spent an insane amount of time on it. any suggestions appreciated!

  RealAnise wrote:

  the mesh layer and the embedded layer are going in and out of mode plotted as a single unit. I tried each selected, locking and unlocking each, dating back to the modes associated, etc.. I can not even put just a layer mode plotted.

  Make sure you have two separate layers (not two sublayers within the same layer). To put just the layer of mesh in tracks mode, command (window: Ctrl)-click on the eyeball. See screenshot:

  

• problem connecting to the database using dbclient

  Can someone help to solve the following question
  
  The following error occurred when connecting to the database when connecting dbclient to the database on linux from windows
  . TNS dbclient names has been configured with the SID and IP address of the machine from database
  
  ERROR:
  ORA-12560: TNS:protocol adapter error

  Could you share your tnsnames.ora file

  And refer to this topic

  http://forums.Oracle.com/forums/thread.jspa?MessageID=9142058�

• connection to Pro CS3 using Sony SDR-CX580

  I have CS3 Pro - windows 7 - a Sony HDR-CX580 camcorder - I can not connect to CS3 Pro - I can connect and load images using a windows program, but it's the bad format. - tried a patch from adobe - without success - what is the answer?

  The answer is the first will connect only to the camera tape.

  Yours is avchd, which is in the solid state.

  Now the normal procedure would be to copy all files from your device to the hard drive and import.

  But! CS3 does not support files from an avchd camera.

  There are two ways around this problem:

  1 converting files to something of that Premiere CS3 is supported. Best way IMO is Cineform / NeoScene, or

  2. upgrade to CS6.

  http://CineForm.com/products/NeoScene

• connection to the internet using time capsule

  I have problems connecting to the internet using time capsule. It detects my wireless network but will not connect to internet. I run ipconfig/all and it comes up with media disconnected. If I put any security on my wireless network, it finds the network and go on the internet with no problems.

  Thanks for the help in advance

  Hello Pudgex76,

  I suggest looking on the forums of Apple for more information if necessary:
  http://www.Apple.com/support/TimeMachine/

• Upload an image using BIS connection did not work

  Hi, I use this link to download pic to download an image using the wifi. But when I use BIS it does not work although I add BIS connection prefix in this line hc = (HttpConnection), Connector.open (url);

  Any idea?

  The problem is in the image size. When we use BIS we downloaded files size limit.

• My pro iPad connects to the WIFI, but loses connectivity to drops in use.  My other IOS devices (iPhone, macbook, etc.) do not have this problem.  Ideas to solve?

  My pro iPad connects to the WIFI, but loses connectivity to drops in use.  My other IOS devices (iPhone, macbook, etc.) do not have this problem.  Ideas to solve?

  Hello BrooklynWM!

  I definitely want my iPad to stay connected to the Wi - Fi connection while I use it.  Thanks for posting that other iOS and OS X devices have no problem with the connectivity dropping.  We can try a few things.

  Would first go through the steps listed in this article: If your iPhone, iPad or iPod touch connects to a Wi-Fi - Apple Support Network

  Then if it does not help, you can check network settings with this: recommended for the WiFi routers and access - points Apple supported

  After trying those, if you still see the drop connectivity, make sure the iPad Pro is updated with iOS 9.3.2 and check to see if the connection when you are in a certain place, time, or one event happening elsewhere in the House.

  Best regards.

• I have a problem connecting on ebay if you use firefox, I get a message saying that the page does not not despite having cleared my cache and cookies.

  I have a problem connecting on ebay when you use firefox, it has been fine for years, but since a few days, I get a message saying that the page does not when I try to log in. I tried to clear my cookies and cache, but it makes no difference. This does not occur in google chrome and I can log on fine there so what's the problem with firefox?

  Do you also have this problem if you temporarily switch to private browsing mode?

  • https://support.Mozilla.org/KB/private+browsing
  • Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  • Select: [X] 'always use private browsing mode '.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  See also:

  • https://support.Mozilla.org/KB/fix-login-issues-on-websites-requrie-passwords

• Problems connecting to a hotspot wifi using my laptop.

  Original title: why my laptop can not do wifi hotspot? I use windows vista with Atheros AR9285 802 starter. 11 b / g WiFi adapt. Thank you for participating in my concern.

  I use windows vista with Atheros AR9285 802 starter. 11 b / g WiFi adapt

  Hi bdsuliano,

  If you are facing problems connecting to the wireless network, try the steps in the following article.

  Windows wireless and wired network connection problems

  I hope this helps.

• Windows dvd maker problem: I hear but not image using windows DVD maker.

  I can hear but not image using windows DVD maker. A few obvious reasons? It's strange because it used to work and now a few months later it does not. The image is there in the start menu of the main menu, just before you press play it starts to play sound with no photos after I press play. Please help, steve gratefully.

  original title:
  Windows dvd maker problem

  Maybe the part "What to do if you have questions" of the following
  article would offer some ideas.

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker

• Problems connecting to wifi using 15-J100ED

  Hello

  I use a 15-J100ED HP Pabilion laptop and I am currently having problems with my wifi connection. As a reminder, I put the laptop on standby when you go to bed one when I woke up, the laptop was not able to detect the wireless network connections. I can only connect to the us using a cable.

  I downloaded the latest drivers for the network card, you can see in the picture attached, but this did not help.

  As soon as I unplug the network cable, no wireless connection is visible when you can see in screenshot 2.

  Could you please guide me to solve this problem?

  Hello:

  Your wireless network adapter is missing.

  You should see a wireless network card listed with the Realtek card.

  I restart the PC and see if it shows up.

  If this is not the case, try a hard reset.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c01684768-4%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  If this does not work, I must say that it is a hardware failure of the motherboard or wireless card.

• After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged as an administrator, but cannot connect to the internet using the standard account. How to fix this?

  After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,

  but unable to connect to the internet using the standard account.  I have the latest version of the Solution Explorer.

  How to fix this?

  Glad to hear it.

  If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem.

• Getting error messgae"problem connecting to the Windows Error Reporting Service. Please try again later! "when you use the error report feature

  Original title: error report function

  When I use the error report feature a warning appears "problem connecting to the Windows Error Reporting Service. Please try again later! »

  It started some time ago and I have plenty of backup errors.

  Using W7

  Hi John,.

  I suggest running Disk Cleanup and selecting Remove all the Windows Error Reporting log files by selecting the checkbox and then click OK:
  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup
  Check if you are then able to start the Windows Error Reporting Service.

• Problem with copy paste function (for images) using the TinyMCE editor

  Can not copy paste images (a document - text Copies OK) to the tinyMCE editor in Windows 8. Seems to be the specific question of operating system.

  Use the tinyMCE editor for info on the download Web site. Copy-paste function works very well on a Windows7 machine

  Hi Anand,

  I would be grateful if you can help me with the following information related to the TinyMCE editor:

  1. What is the Web browser that you use to copy and paste images via the application editor TinyMCE?
  2. What exactly happens when you try to copy and paste images using the editor? You receive an error message?

  This problem may occur because of the compatibility of the browser with the TinyMCE editor.

  Check out these links and check if the suggestions help you to solve the problem:

  http://www.TinyMCE.com/forum/viewtopic.php?PID=34916

  http://www.TinyMCE.com/develop/bugtracker_view.php?id=6075

  If the problem is specific to the TinyMCE editor, you can also contact the support of TinyMCE:

  http://www.TinyMCE.com/enterprise/support.php

  Please let us know if you need more help on this issue. Otherwise, feel free to ask for more queries on Windows.