Problems of color with 10 elements

Similar Questions

• Problem of color with Photosmart 8450

  I have a Photosmart 8450 for many years and he always printed perfectly.

  Recently, I noticed that the colors were totally false when printing pictures on glossy paper - the overall color is mainly yellow and blue ink seems to be completely absent.

  This occurs when the photo tray is used for paper 4 x 6 and also with the A4 glossy paper in the main tray.

  The same photos printed on ordinary paper are perfect, as is the printing Standard test - all colors are present.

  Only so the common factor is the use of glossy paper. I thought that maybe the quality of the paper, but it happens even with HP Premium Photo paper to.

  The printer is installed on WIndows 7, which gives the driver, so I can not yet updated. Windows displays no problem driver and WIndows update has no effect.

  Any suggestion is welcome.

  Thanks for the link to the troubleshooting page.

  Although I had already done a test print, it was only on paper, and he seemed to agree.

  So I tried again on paper Photo HP was expecting the worst. Surprisingly, it was the same - nothing was wrong with areas for color and black cartridges (marked as 1 and 2 in figure 1 of the troubleshooting page), but lacked the areas to the left cartridge (marked as the 3 in figure 1 of the troubleshooting page).

  So I rechecked the cartridges:

  Left: 348 color Photoprint

  Center: 344 tricolor

  Right: 339 black

  Then I realized what was wrong - the left cartridge was empty.

  I'll get a new one and all hope is correct. Thanks again.

• Need help with problems of performance with 14 elements

  I scanned the forums and provided below to help with feedback. At this point, the organizer of the elements is unusable for me - I'm looking for suggestions to help refine the installer to make it usable.

  MY SETUP

  • Just more than 50000 items in the catalog, about 95% of them are photos, videos of rest. 98% of the source files are on a drive to the server in my house, with a gigabit connection.
  • I left full recognition of faces (took two days!) and Yes, during that who was running the organizer was unusable.
  • My PC is an i7 - 4790 k with 16 GB of RAM. Windows Pro 10. Boot drive is SSD.

  THE SCENARIO

  I have a new series of images on my C drive local - images that I scanned, about 30 pictures. Using the view of the pane left records that I navigate to the folder on my C drive. If I move to the tab places it takes about 25 seconds to react and make enforcement appear the places page. If I then go to the people tab it takes about 75 seconds, for the application to respond. In both cases, the application is completely insensitive during the wait.

  Clearly, I can't clean my collection with this kind of response. So here are my questions:

  1. What are the key strategies to improve performance, given my configuration?
  2. Have I not too many objects in the catalog? Should I aim lower number? I saw that there is no actual limit but I feel Im beyond a theoretical limit of messages.
  3. Broken content is to catalog help with questions like this? Is there another internal setting, I should be updated or change?
  4. Given the number of images should I use Lightroom instead?

  The only change that I'm not going to do is to move all the content of my return to my local drive. Sound on the server so that it is completely backed up and protected. So I'm looking for ideas that help given this configuration.

  Thanks to everyone for their help.

  Mark

  mgill2012 wrote:

  .........

  Thanks to everyone for their help.

  Mark

  Mark,

  I can't offer a positive solution to your problem, but I hope to give you some answers or thoughts on this subject.

  Let's start with the description of your case: it's a perfect description of what has been reported in several positions:

  -powerful Installer (computer, SSD)

  -l' use of the recognition of people and/or geolocation

  -use of a NAS for the library.

  -Library of more than 50,000 points.

  -very long indexing, then extremely slow.

  I do not use a SSD (will probably later) or a NAS (I never do). I 65 000 objects and don't care about recognition of face or geolocation, which explains that with a basic setup on I3, 8 GB of RAM, I have an organizing extremely fast speed. Even on an old secondary computer with Vista, it is still quite manageable.

  Your choice is typical of advanced specialists and competent (I guess that less than 1% of the current user of items based). I have yet to see no answer (satisfactory or not...) Adobe staff.

  Given the number of images should I use Lightroom instead?

  I guess that's what Adobe could answer you... and that would be wise. You can use a trial version to make your choice and do a search on the forum for Lightroom. I have not seen similar, even if complaints with NASs, it seems to be a lot to say. Lightroom can convert your organizing catalogs (maybe some problems lately...)

  The only change that I'm not going to do is to move all the content of my return to my local drive. Sound on the server so that it is completely backed up and protected. So I'm looking for ideas that help given this configuration.

  If the use of the network is primarily to ensure maximum security (for not sharing images), why not would you use the choice to store your library on your computer (internal or external disk) with a sync to your NAS as a backup solution? I can tell you that my workflow includes Windows Synctoy to record each session easily and quickly (catalogs and libraries).

  Your very precise description of the case call to assess each factor of different performance individually. Even if the method above is not the final answer, it could shed light on the influence of the use of the network.

  1. Have I not too many objects in the catalog? Should I aim lower number? I saw that there is no actual limit but I feel Im beyond a theoretical limit of messages.
  2. Broken content is to catalog help with questions like this?

  Splitting the catalog is usually a very bad solution, a number of post seems to show that with the recognition of the people/geotagging, the problems around the range of 50,000 points. You can make a copy of the catalog and remove half of the files to check the influence of numbers point; Maybe it's possible with version 14 (deletion is extremely slow, but worked for me, even if it failed with older versions).

  Is there another internal setting, I should be updated or change?

  Sorry, I can't help you there...

  Other factors are using recognition Geotagging and people. Even if you absolutely need those features, disable to see their influence could help Adobe to solve performance issues.

• Problems of colors with Lightroom

  I have so far used Photoshop Elements with great success to catalog and change my jpg photos collection.   I recently bought a camera capable of taking RAW photos and was advised to get Lightroom to manage this.   I imported my collection of jpg into the Lightroom Catalog and was horrifed to how they see that preview (grid and Loupe).   They (very underexposed) much darker look, and the color balance has changed radically.   I need to adjust significantly to get them looking for same in PSE10.   It seems that I can't use LR to manage my existing collection.  Y at - it something I am doing wrong?

  Make sure that you do not apply an import preset or auto-ton of the adjustments. You can consult it by clicking on:

  Edit > preferences > Presets tab (Lightroom > preferences > tab Presets on Mac OSX)

  You can also try clicking on that button Reset all development default settings to see if that makes a difference.

  Basically, LR is a managed application of color and when you upload a jpeg file, all cursors in the develop module should be set to zero.

• I have a problem of color with CS3?

  When I move a picture of the bridge, where it seems the color is relatively accurate in Photoshop, the color is off. It seems to me that the colors do not create natural colors but remain mostly in red and cyan. Have I not something 'turned on' or is there a problem with the application. How should I do?

  Right-click in an empty area of your desktop and select Properties (or click Start > Control Panel > display, depending on your settings, you may need to select appearance and themes first). Select the settings tab, and then click the Advanced button. Go to the color tab management, at the bottom will be a small window with the profiles associated with your monitor. If you are using LCD monitor and did not use a calibration device and measure your monitor, this window should be empty. If you used a calibration device, try to recalibrate your monitor.

• Problem of color with pdf from Indesign. I have a special mix CMYK for a bcard in Indesign. When I export the pdf file that the CMYK mix has changed just started today 1.13.15 Running Yosemite 10.10.1 all help to what to look for would be greatly apprecia

  I have a special mix CMYK for a bcard in Indesign. When I export the pdf file that the CMYK mix has changed just started today 1.13.15 Running Yosemite 10.10.1 all help to what to look for would be greatly appreciated.

  You are mixing color profiles a-place, or document workspace does not match the destination to export space is incompatible.

• Problem of color of ps elements 7?

  I recently got a new computer for Christmas, and so I reinstalled my ps on it items. I tried to draw this picture and he was perfectly fine, it was before that I went to the internet and switched back to draw. Once I went back, he'd let me not use all colors in addition to black and white shades. I don't know what happened. It will not let me choose other colors, if I try to click on any color, such as blue and click 'ok', it will be just another shade of gray. And what of weird, when I close the photo, my color back, but when I open a new document, it goes gray scale. Is there a way to fix this? Also, I noticed when I open a document, it says in the title next to the title and the "(grey/8) layer area" "

  I'm not very good in computer skills, especially considering im young and pretty...

  can someone please? ! ?

  You have somehow created/converted into a grayscale image (what means "gray"). Go to image > mode > RGB and you should be able to work in color once again.

• Lag/rendering with Premiere Elements problems

  During my studies, I was with Premiere Pro, with whom I could work (though I've always been under the impression that I'm playing with a little more than the tip of the iceberg). After leaving University, I looked out for another video editing program, and since most of the comments stated that Premiere Elements has been a good choice for non-professional video editing and certainly adequate for everyday use. So, I got a copy of PElements, which was pretty cheap compared to its big brother.

  However, after trying to edit two videos in one (the same scene taken with different cameras), I must admit that I am a little disappointed.

  The biggest point of contention is the terrible lag. Agency was already overwhelmed by the people, but they did not nearly unworkable program. Then I started to make the two video tracks, that would take about 4 hours for a simple 11:30 (2 x) minutes of video material.

  I used the following for this system:

  Intel Pentium Dual CPU E2180

  2 GHz

  4 GB of Ram

  Windows 7

  32 bit

  Video files, that I worked with were already changed to Avi using the following conversion programs converted camera cassette versions (I had to convert because for some unknown reason, my old Premiere Pro has refused to work with AVCHD or vlc.tod - files, so I did not worth to try it here).

  Free Video Converter V3.0.0.0 (Koyote Soft)

  Output Avi Format

  MS-Mpeg4-V2 codec

  Any Video Converter (MPlayer)

  Output Avi Format

  Mpeg4 codec

  So, my question would be: is this normal? I guess, if anything, items would be faster than Pro because it is less complicated, but appearently I was mistaken. What is the reason - is the obsolete system, do I have to use special presets for a video clip or is the format of data file I used to blame for either or both of my problems?

  (other questions are cut-editing tools and color are much coarser than those of the body, but I guess this is intentional)

  Your gun shoots in a variety of formats. If you want to edit in Premiere Elements, you should shoot only in MXP or FXP mode. (Leave the Everio out of the mix for this part of the experiment, since these cams have their own unique challenges.)

  You should then beyond a Premiere Elements project using the project settings for stereo 1920 x 1080 AVCHD full.

  Use the elements first get the media / Flip and AVCHD camcorder to import video from your camcorder to your computer and place the video on the timeline. You should not see red lines above clips. You should also see pretty good performance when you work with it.

  Also, your computer may be low power to work with this type of video. Hi-def video can take a long time to render, particularly on a dual-core computer. But converted to a different format using another program will not improve things a lot unless you know for sure your perfect product converter Type 2 DV - AVI.

  In fact, you can produce a Type 2 DV - AVI from this video AVCHD with Premiere Elements. Just place your AVCHD videos on this once and then go to the action/computer/AVI and select it as the DV PRESET. The video it produces should work very well in a project set up for widescreen DV. It will be the standard definition rather than hi-def - but, if you plan out your last video in standard definition (for example, online or on DVD) you might as well work with it in this format.

  But as I have described above as your experience. Try not all high-end and do not mix the Everio format in your project again and see if it improves things.

  Once find you a clean and efficient workflow that works with the best video formats, you should see a significant improvement in performance.

  But for now, stay away from third-party video converters. They seem to be working against you.

• PROBLEM of ALIGNMENT with color printing

  PROBLEM of ALIGNMENT with color printing.  HP Officejet Pro L7680 all-in-One - using Mac OS x 10.6.8 - with USB connection & ethernet - without error message thank you.

  Hello

  What kind of problem?  Print quality problems?  You have run the alignment of the HP utility?

• I have panasonic lumix g6 and cannot open raw with adobe elements 12 files, there is no support for this problem, any suggestions?

  I have panasonic lumix g6 and cannot open raw with adobe elements 12 files, there is no support for this problem, any suggestions?

  Did you check help-> updates to see if they are available? You probably don't have the latest version of Camera Raw that was compatible with Photoshop elements 12 installed.

• I can't have the option in menu to 13 items to work.  Any ideas?  I have already downloaded all the Templates menu and updated the software.  I never had this problem with 7 elements.

  I can't have the option in menu to 13 items to work.  Any ideas?  I have already downloaded all the Templates menu and updated the software.  I never had this problem with 7 elements.  With the help of 13 elements, I can successfully burn my movie on a disc (DVD) without menu.  The burning process is interrupted after that I added a menu.

  Rick

  First of all, please remove the stopper at the end of the content of the timeline. It is not necessary it and burn the causes of the problems.

  The main Menu marker should be OK, no similar problems as the stopper a.

  RTA

• How can I match the colors of Photoshop with web elements? Nothing works for me.

  Hello.

  the first thing I want to say is I know there are many other discussions and topics on this subject - I read them all, but nothing seems to work for me and I'm really confused and frustrated.

  My site has already made in CSS colors, but on some songs, I want to place images, corresponding Color at bottom of the site. It seems impossible.

  I tried almost all color profiles, sRGB, disabling the color, through "save for web", record management off the display in "proof colors" option, by checking and not unchecking each box, still no joy.

  Is the closest I have got in this way:

  • I put Monitor RGB in the color settings,
  • create a new document with no color management
  • fill the background with the color, what code I copy CSS,
  • Save in the dialog box Save for web without conversion to sRGB and embeded in JPG format color profiles (or PNG, cannot see any difference here) (Nothing checked under options for JPG) file

  Then I watch by edge Chrome, Firefox, and even if it is narrow, it just doesn't fit!

  When I do a screenshot of my site, paste in photoshop and choose colors with the color picker, the photoshop color watch codes are the same those of CSS, correct! But when I save... BAM, everything changes.

  How is that possible? And why these problems exist?

  Because, oddly enough, I managed to match all the colors perfectly in browsers with Microsoft paint on the first try! Without messing around with tons of color profiles, settings, color calibration and other sorts of black witchcraft that I don't understand.

  At this point, I do not see how potentially usable for webdesign Photoshop.

  I'll provide more information as soon as possible, if necessary.

  Photoshop manages color. Unfortunately, this leads to choices that must be made to the right, while the painting was simply a color unmatched brain dead.

  1. try to use sRGB as your workspace. Do not leave any conversion.

  2. save in PNG to test that the colors may change to JPEG.

  3 test cycle.

  4. If they don't always match, reopen the PNG and check its color. Unchanged?

• Why 12 items to hang as soon as I open the text tool?  Get the message "an unexpected and unrecoverable problem has occurred.  Photoshop Elements will now stop.  With the help of Mac

  Why 12 items to hang as soon as I open the text tool?  Get the message "an unexpected and unrecoverable problem has occurred.  Photoshop Elements will now stop. "In Mac Help.  No imported fonts

  First check your fonts folders and make sure none of them are empty. Then get out the font book (applications > utilities) and check all your fonts, with which and resolve duplicates and fix any problems.

• Problem opening files with Mac OS Mavericks and elements

  I recently installed Mac OS 10.9.x Mavericks.  Since then, I've had problems opening files in 11 elements.  I upgraded to 12 items, blindly hoping the problem fixed itself, however it does not.   When I try to open a file from the Finder window appears then disappears immediately.  Occasionally, it will remain open until I scroll down to the bottom, but then closes.   I keep files on an external drive, but the drive work with other applications, so I don't think it's that.  If anyone has had a similar problem and has ideas, I would be grateful that the program is unusable at the moment.  Thank you very much anticipation in

  It is extremely important to remove update preferences to the Mavericks:

  http://barbarabrundage.com/2013/10/28/Photoshop-elements-and-OS-x-Mavericks/

  You want to find:

  com.adobe.PhotoshopElements.plist

  Paths in Adobe Photoshop Elements (version number)

  Settings for Adobe Photoshop Elements (version number)

  The link shows you how to find the library user in 10.9. While you're in there go to the Saved Application States folder and delete any for PSE.

  In addition, if you have a wacom, it is crucial to update the released pilot the other day.

• Questions of color with photosmart 7960

  I have been using this 7960 for years with the XP operating system without any problem at all. I recently changed computers and is now using a beta version of Windows 7. The printer works fine except that I now have a blue tint to all my printed pictures. I did a printer head cleaning operation and ran a test sheet. The test sheet has not produced any yellow color, all other colors looked fine. I use Adobe Elements 7 as my photo editor and I changed my profile of Adobe RGB color in the elements and on the printer, but that made no difference. Someone has ideas like how to do about this situation? I can't find anything on the HP website that deals with this.

  If the yellow is not printing a test page this would indicate that you need a new color cartrdige.

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging