problems of fax-impossible to send a fax

Similar Questions

• PROBLEMS of FAX Toshiba E-Studio 250

  Hello!
  I don't know if this is the place to post my problem...

  I have a Toshiba E-Studio 250, and I have a problem of fax.

  I have a fax / Tel (RDS & RCS - my local provider) connection

  Now, my problem:

  When I am reciving a FAX - my 'PHONE' will Flash for a few seconds and nothing happens.
  When I'm sending a FAX same old story, the 'PHONE' flashes and nothing happens.
  If I press the "MONITOR" button, I heard the fax tone.

  My Toshiba has a 'LINE' jack so I divided the two-1 cable cable goes on the phone and the other in the Toshiba.

  Hope you understand my English is not so good. Thank you one Please HELP! (I'm desperate)

  Hello

  It is a forum on the problems of laptops and options & Accessories questions.
  If don t think that if someone would be able to help you here, but I found a manual for the 250 e - Studio
  http://www.Toshiba-SA.NET/download_operator_manuals/e160_200_250/e-STUDIO_160_200_250_Operators_Manual.PDF

  Here you can find the Support from Toshiba page to print, copy, Fax, Scan and e-mail devices
  https://electronicimaging.Toshiba-Europe.com/

• HP laserjet pro m127mfw: problem with fax

  Print Fax page 1 stays on the screen of the printer, even if I unplug the power and the cable from the computer.  Once, it will print the last fax received.

  Hi @Kathmanu2,

  Thanks for joining the Forums of HP Support for a solution to your problem of fax.

  I understand that your are using a HP LaserJet MFP M127 with computer Windows 10 Pro and when you receive a fax the display stops at 'Print Fax page 1', then you need to disconnect the cables and it prints the last fax received when you reconnect them. I would like to help with that.

  Looks like the printer memory is full. A the NVRAM initialization is necessary in order to empty the memory.

  I'll send you a PM with information necessary reset. If you are unsure how to check your PMs, here is a post that can help - How to check your messages.

  Please let me know if that solves the problem, or if you need assistance.

• Problems 8600 fax pro

  I have problems of fax with my HP Officejet Pro 8600.  The fax goes fax test reports.  However, I can only fax in my own area code or State.   NO out of State.   I can't find something that solves this problem.

  What I see on the two codes you sent me is that the machine remote (that you send) is either inaccessible or that information has been received but was so riddled with packet-loss (loss of data) that it could not be interpreted.

  http://support.HP.com/us-en/document/buu02549

  Usually with Warner Cable you are dealing with an ADSL line, in which case you will need to get a digital filter and put it on the line to help prevent this data loss. You can usually contact them to see if this might be the case, and whether or not they can give this your fax line ADSL filter.

  Let me know and I'll get right back with you!

  -Spencer

• I have an Iphone 6 and can't send or receive text messages to Iphone users not.  I can send the Imessages blue very well, but it is impossible to send green messages any idea how to solve this

  I have an Iphone 6 and can't send or receive text messages to Iphone users not.  I can send the Imessages blue very well, but it is impossible to send green messages any idea how to solve this

  SMS or text messages, are a specific function of the carrier. You must have an addition of text on your cell phone plan. If you can not send SMS, you must contact your operator to solve the problems.

• Impossible to send using windows live mail with on restart my computer everytime, error 0x800CCC0F

  Impossible to send using windows live mail with on restart my computer every time.   I use broadband services, but they say it is not their problem

  It started a month ago.   Whenever I try to send an email using windows live mail, I get a failure;

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity.

  Subject ' Fw: Snowplow '
  Server: "smtpout.secureserver.net."
  Windows Live Mail error ID: 0x800CCC0F
  Protocol: SMTP
  Port: 80
  Secure (SSL): No.

  Anyone have an idea where to start.

  Server: "smtpout.secureserver.net."
  Windows Live Mail error ID: 0x800CCC0F
  Protocol: SMTP
  Port: 80
  Secure (SSL): No.

  Anyone have an idea where to start.

  Start with this Port number.   Port 80 is usually reserved for HTTP.    Try the 25.

  Unless your host secureserver.net says something, otherwise...

  Oh.  They do it?  But no information for WLMail, so you have to adapt...

  http://products.secureserver.NET/email/email_thunderbird.htm

  (BING search engine for)
  Site: secureserver SMTP .net
  )

  In particular, I think, note this:

  NOTE: "smtpout.secureserver.net" is a relay SMTP server. To use this server to send e-mail messages, you must enable SMTP relay on your e-mail account. Connect to your management page email accounts to set up SMTP relay. If you have not set up SMTP relay and allows it to your Internet Service Provider (ISP), you can use the server of mail from your Internet Service provider. Contact your Internet service provider for this setting.
  

  BTW if you use WLMail.exe you can also try to get help from the WLSC through its Mail Portal

  http://windowslivehelp.com/product.aspx?ProductID=15

  Good luck

  Robert Aldwinckle
  ---

• How can I copy n since my Mac air bleeding in a USB key? Since his 1.3 GB its impossible to send these PT by email to my friend...

  How can I copy and paste my mac air photos for a pen drive? As his total 1.3 GB, its impossible to send these fotos by electronic to my friend... Please advise.

  In Photos, select the images you want to put on the external device.

  Photos-> file-> export, and then select the external device as your destination for export.

  You can select an album (or albums) to export and the content of the album is written to the specified destination folder.

  NOTE: You can also get a Dropbox.com account, which includes 2 GB of free storage, and then export the images you want to share in the Dropbox--> Public folder and then send a link to your friends.

• Error ID: 0x800CCC0D, impossible to send or receive messages in Windows Live Mail account.

  Original title: cannot send or receive messages for the Windows Live account.

  Please help me solve this problem!

  Can't send or receive messages for the Windows Live account. The host 'POP3' could not be found. Please check that you have entered the server name correctly.

  Server: 'POP3.
  Windows Live Mail error ID: 0x800CCC0D
  Protocol: POP3
  Port: 995
  Secure (SSL): Yes
  Socket error: 11001

  Hi ChrisVisentin,

  As you use a Windows Live Mail account, you can post your question in Windows Live Mail support for assistance.

  Hope the helps of information.

• Impossible to send a link to the Web page by email it is gray im using windows live mail and windows 7

  Impossible to send a link to the Web page by email it is gray im using windows live mail and windows 7

  Look at: Start-> Default Programs-> set your default programs
  Select: Windows Live Mail

  --
  Karel your [MVP - Windows desktop experience]

• problem with & gt; & amp while sending xml as string webservice

  Hi I am also faced a problem that I want to send a string to my webservice of sap in the following format

  < DATA > < STRUCTURE VAL = 'FLASH' > < VALUEPART VAL = '40100' > < / VALUEPART > < / STRUCTURE > < STRUCTURE VAL = 'FLEX' > < VALUEPART VAL = '2000' > < / VALUEPART > < / STRUCTURE > < / DATA >

  But every time I send this string to my webservice in webservice is reading these data as

  & amp; Lt; DATA & gt; & amp; Lt; STRUCTURE VAL = 'FLASH' & gt; & amp; Lt; VALUEPART VAL = "40100" & gt; & amp; Lt; / VALUEPART & gt; & amp; Lt; / STRUCTURE & gt; & amp; Lt; STRUCTURE VAL = 'FLEX' & gt; & amp; Lt; VALUEPART VAL = "2000" & gt; & amp; Lt; / VALUEPART & gt; & amp; Lt; / STRUCTURE & gt; & amp; Lt; / DATA & gt;

  Please help me solve the problem.

  Hi Prashant,

  It's very simple.

  var dataXMLString: String = ""; " //

  var cdataXML:XML = XML(" ");

  you get your data as xml cdata.

  You can do it by using another way. Use the Base64 conversion.

  Encode xml data using Base64 conversion and side Server decode to the original string.

  Thank you

  Vikram

• OfficeJet 6480 problem w fax setup, will not pass through wireless phone

  OfficeJet 6480.

  I took 20 minutes on the phone to find someone to get me to tell them what the problem is.

  the first speaker gave me a ticket #8018531464

  and passed me on the real tech support (I think).

  Finally, I asked if I could please tell him what my problem.

  He said yes and asked if f I have the black cord that comes with it.

  I said 'yes' and he pulled the plug (1 line) on the 6480.

  He hung up on me!

  hahaha, nope, the wwas cord connecting the cable-modem (TimeWarner) jack to the panasonic cordless phone.

  in any case, I wasn't going to go through the introduction of 20 min. again, only to find out if he could answer the question.

  So here it is.

  When I connect the black cable supplied with (for a single line I think) telephone jack of the cable modem (they provide my dgital phone, internet and Cable only ESA, no data dedicated line because I have to go through a flurry of faxes from time to time at home.)

  then the decision-making ext 2 'lines' on the 6480, another cord goes to the single input based on the receiver of the wireless phone.

  This is the problem, no tone came thru.

  so, in this loop, I inserted the small adapter, single-jac + cord short. the output of the 6480.

  and plugges regular there cord to the cradle of the wireless.

  I had a tone. It seemed to work so far. So I went to bed, feeling successful, to continue to ensure that I had

  useful with my 6480 fax equipment.

  However the next day it did not get a dial tone on the phone.

  I tried different combinations and then abandoned once more imn frustration.

  I tried to get this thing to work for a few months now.

  Once I had the parts of the loop of any kitchen. someone should sent the fax and the 6480 a o ring...

  ringtone and ringtone.

  He hgave been other variants of this scenario which have brought to the point of frustration, I said why bother, I'll do it at work.

  and not being able to devote a lot of time and energy with this easy start home.

  now since I've been laid off, I shortly and more neceessitty to fix this problem.

  I think that the signal gets to the 6480, because I run the test and all passses. There is no test for what I am referrring to and none combined on the 6480.

  I went into the details for several reasons,

  I can omit something: oh, Yes, the router is a lynksys router.

  There is a nearby office using the wireless router and a laptop computer in the other room.

  plus, you get a little history, to learn something on me, as you go through the same routine that I do with technical support. HP is not the only culprit of this approach non-customer ceneterd. But even that does not make this right.

  I suggest, if some listen to those interested. This customer centered woould be to first know of me what is my problem, while you may, or may not, to solve. Then, you can collect the serial number, etc..

  In addition, since you ask the serial number, I would like, as a customer, with that number clearly presented in a convenient place, say in my opinion as I llook at the machine.

  Yes, I know, its probably on the back, probably there insert n close the caps. no doubt.

  but I have to do a flshlight, reading glasses and get the machine our of the arrangement.a clever, bulky, puzzle - like real aesthetic. It's b

  I hope to hear from anyone. Thank you.

  Here is the document on the implementation for different kinds of digital lines (think VOIP is not listed) that could work however, the fax modules used in probably all HP AIO are for analogue telephone lines only (the kind of Ma Bell telephone lines that have nothing to do with computers).  So, you could be just out of luck unless you want to pay for another standard analog line in your home for the fax.  Sorry to be the bearer of bad news, but makes no sense you need to beat your head in frustration on something that is not likely to ever work.  Oh and another thing - make absolutely sure that the telephone line is connected to the fax to send/receive is the one supplied with the printer, they are not your average phone cords that come with phones or you can pick up at the local super store.

• Problems with fax after loading software

  I had my HP 4500 for awhile.  Never had any problems with the fax.  A few days ago I finally loaded the software that comes with it, and now my fax machine doesn't seem to be able to receive.  The rings of the machine about 5 or 6 times, it seems that this connection is, but whenever I get "failed"...

  Any suggestions would be greatly appreciated!

  Hi suzduell,

  Follow the steps outlined in the document below.

  http://support.HP.com/us-en/document/c01956630

• Problem with Fax

  Yes, I have a HP Officejet 4500 all-in-one and recently we have improved our Pc and the Pc that we had had no connection on the rear of the machine to connect line. So we installed a separate line in the House of the machine but still can't fax or receive fax, that he enters my phone line on the answering machine, but I put the settings I have no answer on the line with the machine but, I still can't get it to work for the fax, everything else works fine on it.  You have any suggestions that may fix the problem where I can use the fax as well something will be greatly appreciated? I did a test fax and everything.

  Could you change the answering machine to 4 rings and the fax machine rings to answer 6.

  Also consult the distinctive ring pattern and change of triple Crown on ALL RINGTONES.

• Problem receiving fax on new 6600

  My new 6600 fax works very well on my phone line until I have add a telephone with answering machine.  Then it tries to connect but fails. Phone service is through a router broadband from comcast.  He worked for several years until I'm too new broadband services provider, so do not know if the failure is in the telephone or telephone service.

  How to do this?

  I solved my problem.  I saw a note you need a filter for a phone with an answering machine.  I happened to have a used filter of a dozen years ago and so I tried it.  That solved the problem!   I guess there is something the signals sent our by the responder that interferes with the installation of 6600 fax that should be filtered.  I think we can buy filters at Radio Shack.

  FYI, my phone service is embedded in my service to broadband from Comcast.  I guess that qualifies as a DSL service, although I was not sure about it.

• Problem with FAX Setup dialog box

  When I start, a box dialog indicates that WIndows is trying to install a fax MACHINE and I have to go to the Manager end tasks now.  I don't want that, I didn't ask for it, I don't have the disc for it.  How can I get rid of him.  Microsoft doesn't make it easy to communicate with them.

  Hi Babs336,

  1. Did you the latest changes on the computer?
  2. Have you recently tried to install the Fax on the computer?
  3. When was the last time it was working fine?

  Method 1

  If you want to remove the computer's fax services, then try the steps mentioned.

  (a) click Startand then click run.

  (b) copy and paste or type the following command in the Open box, and then click OK:

  appwiz.cpl

  (c) it may take several seconds for your computer to compile a list of programs. The dialog box Add / Remove Programs opens.

  (d) click on Add/Remove Windows components on the left of the list of programs to start the Windows Components Wizard. This only lasts several seconds.

  (e) in the components list, clear the Fax Services check box, and then click Next. The installation program uninstalls the computer's fax services.

  How to enable and configure the fax service in Windows XP

  http://support.Microsoft.com/kb/306550

   

  Method 2

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.