Problem with Fax

Similar Questions

• Problems with fax after loading software

  I had my HP 4500 for awhile.  Never had any problems with the fax.  A few days ago I finally loaded the software that comes with it, and now my fax machine doesn't seem to be able to receive.  The rings of the machine about 5 or 6 times, it seems that this connection is, but whenever I get "failed"...

  Any suggestions would be greatly appreciated!

  Hi suzduell,

  Follow the steps outlined in the document below.

  http://support.HP.com/us-en/document/c01956630

• HP laserjet pro m127mfw: problem with fax

  Print Fax page 1 stays on the screen of the printer, even if I unplug the power and the cable from the computer.  Once, it will print the last fax received.

  Hi @Kathmanu2,

  Thanks for joining the Forums of HP Support for a solution to your problem of fax.

  I understand that your are using a HP LaserJet MFP M127 with computer Windows 10 Pro and when you receive a fax the display stops at 'Print Fax page 1', then you need to disconnect the cables and it prints the last fax received when you reconnect them. I would like to help with that.

  Looks like the printer memory is full. A the NVRAM initialization is necessary in order to empty the memory.

  I'll send you a PM with information necessary reset. If you are unsure how to check your PMs, here is a post that can help - How to check your messages.

  Please let me know if that solves the problem, or if you need assistance.

• Problem with FAX Setup dialog box

  When I start, a box dialog indicates that WIndows is trying to install a fax MACHINE and I have to go to the Manager end tasks now.  I don't want that, I didn't ask for it, I don't have the disc for it.  How can I get rid of him.  Microsoft doesn't make it easy to communicate with them.

  Hi Babs336,

  1. Did you the latest changes on the computer?
  2. Have you recently tried to install the Fax on the computer?
  3. When was the last time it was working fine?

  Method 1

  If you want to remove the computer's fax services, then try the steps mentioned.

  (a) click Startand then click run.

  (b) copy and paste or type the following command in the Open box, and then click OK:

  appwiz.cpl

  (c) it may take several seconds for your computer to compile a list of programs. The dialog box Add / Remove Programs opens.

  (d) click on Add/Remove Windows components on the left of the list of programs to start the Windows Components Wizard. This only lasts several seconds.

  (e) in the components list, clear the Fax Services check box, and then click Next. The installation program uninstalls the computer's fax services.

  How to enable and configure the fax service in Windows XP

  http://support.Microsoft.com/kb/306550

   

  Method 2

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Problems with the software of fax on 1536dnf

  Hi, I just got a 1536dnf all-in-one, and I have a problem with the software sending faxes. I can fax machine directly, but when I try to send a fax from my computer, I can't even get into the software. I get an "internal error" that there is no device detected. I installed it on my network, so about four different computers can access. I'm running Windows XP SP3 and any other function works fine (I can print to the printer from each computer, send and receive faxes from the printer itself, etc.).  Any ideas why this happens? I found zero documentation or help on this and any help would be appreciated.

  Thank you.   I was using FAX4Word plugin for Word.  It allows to easily print/fusion of fax machines.

  I answered my own question, but others may be interested in:

  I was buy HP printers since the time that first, they came out with the LASERJet House, I waited in line to get one at the then price of $700 or more.  I bought a HP product on average every 3 years after that.   All HP products were excellent quality and easy to use.

  Once I looked at the question of the use of the 1536dnf as a modem, I found that I was MUCH better off just buying a modem from "Zoom" $ 50 for my database driven fax needs rather than trying to send it through the HP.  If it is possible to use the 1536dnf as an intuitely MODEM, it is a solution too complex to simply get a modem to 'Zoom in' $50, which leaves my 1536dnf available for other tasks.

• I have an Officejet 4500 printer all-in-one. I have problems with incoming faxes.

  I have an officejet 4500 all-in-one printer.  I have problems with incoming faxes.  It starts to connect, but then prints a sheet indicating image Fax Send report is set to off.  How can I enable this so that I can receive faxes.  Thank you.

  The "image on fax send report is set to off" is just for the image on the fax. This is will you won't fax. Check the connections.

  You should have the telephone line from 1 LINE of fax directly to the WALL SOCKET.
  You should have the phone plugged into the LINE 2 of the fax machine.

  Access your fax on the printer settings.
  Go to the ADVANCED SETTINGS.
  Enable error CORRECTION MODE (ECM) - OFF
  You turn Fax speed to-SLOW

  After that, run your FAX TEST and see the results.

• ERROR MESSAGE HP6700 - PROBLEM WITH THE PRINTER OR INK SYSTEM CONTACT HP

  I JUST BOUGHT A HP OFFICEJET 6700 (LESS THAN 1 WEEK), THE PROBLEM OF PRINTER OR INK SYSTEM MESSAGE, TURN PRINTER OFF THEN WE IF THE PROBLEM CONTINUES CONTACT HP. IS DISPLAYED ON THE PRINTER SCREEN. I DID EVERYTHING SUGGESTED, AND MORE MORE, BUT THIS CUSTOM MESSAGE CLEARLY.  ALL DIAGNOSES OF THE PRINTER THE PRINTER IS FINE.  THE OPERATING SYSTEM IS WINDOWS 7.

  Mahamoud,
  Your article made a walkthrough basic troubleshooting, ending with the question if the print head is repairable. Because it is not on the 6700, the article isn't really the problem.
  
  Here is the solution I found to this problem:
  I discovered that eliminating all ink cartridges allows the printer at startup (although there is a message saying the missing print cartridges).
  Putting the cartridges in a binary regression revealed that the ink has been bad. (In my case, I only got the message of failure/printer ink when the yellow cartridge was in the printer).
  Replacement of the restored cartridge the printer functionality.
  That's the good news.
  Now the bad news: for HP.
  The generic error message indicates a failure with the printer or the ink system. No differentiation. With the electronics in the cartridges (that the client pays a high price for), looks that HP could not understand how to indicate a cartridge problem. This error message is not only unnecessary, but misleading. The printer indicates only a power reset and then contact HP. There is no indication that he might be a cartridge problem, not to mention what cartridge has failed. By the way, my customer encountered this problem when you replace the color cartridges. The cartridge failed was a new replacement.
  All of the web enabled features, fax, scanning features, print included with this printer are not very useful if the user can't get the dang thing to print.
  Another problem with this printer, is that, even when you only print in b & W, the printer uses little color (ostensibly make Blacks more "BOLD"). Then, finally, a color cartridge will go low or empty, even if only B & W printing. And guess what, you can't continue to print n & B if one of the color cartridges are out of ink. Thus, HP... How is this useful printer in an office environment, where most print tends to be B & W?

  (I would add; the solution in the message of failure/printer ink cartridge cannot fix your problem if, in fact, there are a few default printer. But if the problem is in the ink system, then the troubleshooting cartridge can help you).
  I have posted similar comments on Amazon, for this printer, in the subject line: shame on you, HP.

• Photosmart HP: Printing problems with my HP Photosmart

  I had problems with my photosmart for awhile. For a while, when I would plug into the usb port of my computer, I had received the error "the disk you inserted is not readable by this computer. I used to ignore the error and used to print anyway.

  Yesterday, someone pushes my printer without unplugging the usb by behind. Now, when I try to print something, I see in the queue of the printer, the error message saying "communication error: the computer is therefore more able to communicate with your printer." "Turn off the printer, check your printer connections and look for errors in the printer and turn on the printer. I got it done and straightened my computer as well, but it does not work. After that, I opened the printer utility via my computer to print a test page, and it worked really, which is strange.

  Thanks for your help,

  Sarah

  Hi @stoukan,

  I see that you are getting the error "communication error: the computer is therefore more able to communicate with your printer." Turn off the printer, check your printer connections and search for printing errors and turn the printer. I would like to help you today. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  What is the name and the product number of your printer? How can I find my model number or product number?

  Turn on the printer and make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation. The USB cable should not be more then 6 feet. Make sure that the USB cable is connected directly to the computer. (not a station or a hub) Try a different USB port on the computer. Check that the USB cable is connected to the appropriate port on the back of the printer.

  Check if the Mac sees the printer is connected.

  Go to the Apple, select about this Mac, system report, select USB.
  Do you see the printer listed?

  Fix permissions of the drive on the Mac:
  Close all applications.
  In the Apple menu, click OK, click Applications, and then click utilities.
  Double-click disk utility.
  Highlight your hard drive / partition on the left.
  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.
  Click on Printers & Scanners.
  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.
  Click OK to confirm the reset.
  Type the name and the correct password.
  Click OK to reset the printing system.
  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Try to print again.

  If you're still having problems, please try another USB cable.

  If there is anything else I can help you, let me know. Thank you.

• Printing problems with XP and Lexmark-documents are just stuck in the print queue

  Original title: printing problems with XP and Lexmark

  Until yesterday, I was able to print OK using Windows XP and a Lexmark Printer series 3500-4500 with wireless capabilities.  Reported network test wireless (on printer) and report indicates that there are no reported problem, also did the diagnostic test and which shows no problem either.  I can't print and documents are just stuck in the print queue - please can someone help, it drives me crazy because it's probably a very simple solution.

  I guess you do not have all of the error messages.

  It is possible that comes to mind that your printer has received a new IP address of your router (this could easily happen if you have several computers and other devices that connect to your wireless network).

  Find the IP address of the printer of his network diagnostic page.
  Click Start > printers and faxes, right-click the printer and select Properties
  Select the Ports tab, then click on the button "Configure Port" (be careful NOT to click anywhere in the list of ports)
  Make sure that the IP address in 'Port settings' is identical to that shown on the diagnosis of your network printer page.

  To avoid this problem in the future, you must configure the printer to have a static IP address.  See your printer User Guide for instructions.

  Choose an appropriate subnet address (i.e., has the first 3 groups of numbers the same as the other addresses in your network) but who is not in the range of addresses assigned by the DHCP server on your router.  See the User Guide of your router for more details.

• Problems with Exchange Activesync contacts

  Hello everyone, I just got the Z3 and I have a problem with my contacts. When I go to select a contact to call it displays the default fax number to call. Y at - it a sequel to change this? It does for all contacts that have a fax number, the phone icon appears next to the fax number.

  Thanks for your help

  What happens if you change the settings of contact?

• HP Officejet Pro 8610: Error code problem with printer or ink system

  sent a fax Monday very well and now I'm going to use printer & fax to search for these words in the window:

  "There is a problem with the printer or ink system. Stop printer, then if the problem continues contact HP. »

  I had done this several times as well as other things that HP troubleshooting suggested.

  Hi @MrsQT,

  I see that you get an error on the printer or ink system and made the suggested troubleshooting already. I'd be happy to help and find a document for you to review to make sure that you have tried everything: HP OfficeJet Printers - resolve the error 'Problem with ink system'.

  If the problem persists, I suggest to call the hotline to see if you may be able to get a discount on a newer model, or replace your printer if it is under warranty still. HP printers usually have a warranty of 1 year from the date of purchase, you can check the warranty using the following if you wish; guarantee cheque.

  If however the recommended solutions solve the issue please click on accept as Solution on this post so that others can find what worked for you.

  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number

  File number and phone number are displayed.

  I hope this helps.

• Problems 8600 fax pro

  I have problems of fax with my HP Officejet Pro 8600.  The fax goes fax test reports.  However, I can only fax in my own area code or State.   NO out of State.   I can't find something that solves this problem.

  What I see on the two codes you sent me is that the machine remote (that you send) is either inaccessible or that information has been received but was so riddled with packet-loss (loss of data) that it could not be interpreted.

  http://support.HP.com/us-en/document/buu02549

  Usually with Warner Cable you are dealing with an ADSL line, in which case you will need to get a digital filter and put it on the line to help prevent this data loss. You can usually contact them to see if this might be the case, and whether or not they can give this your fax line ADSL filter.

  Let me know and I'll get right back with you!

  -Spencer

• HPPIW. EXE does not solve the problem with the installation of the complete software for 8500 A909g

  Waterboy71 - sorry for a new position, but the forum is read-only (?) so I can't respond to your response to my problem with the installation of the driver/software 8500 A909g.  By your answer on 5/19, I downloaded HPPIW. EXE and it ran.  It detects my wireless printer, but it tells me that "the selected printer is not supported by this wizard."  Is there another thing I can do to install the software so that I can scan and fax from my Windows laptop 8.1?

  Hello
  If please try following the steps below and check if this can solve the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• Printing problems with QuickBooks

  I had to reinstall my HP Photosmart all in one fax 410c and now I can't seem to print the checks in QuickBooks.  If I select print single page fax start screen is displayed.  If I choose to print continuous page, the police of matrix and does not fit on the cheque.

  Thanks for getting back to me. I've seen this problem before, and if you are able to print from other programs without any problem, then the problem is not with drivers and printing software. It's a problem with the Quick Books software. I suggest that you uninstall Quick Books and reinstall. If this does NOT resolve the problem, you may need to contact directly the Quick Books.  Sorry for the inconvenience. Here is a link to the support team dealing with Quick Books.  http://www.infinitelyvirtual.com/contactus.html

  Thank you for your time.

• I don't even know what to call this problem with Windows 7! Can someone please read and help?

  Hi all

  What is c?

  I have half a dozen problems with Windows 7 right now, but let's start with the most irritating.  Screens disappear and reappear.

  I'll open a window and then open another (at the same time) for a reason, and if I don't have my mouse entirely on whatever the window, it "disappears".  That is, it will become transparent with just sort of 'framework' around him.  The content is gone.  But they come back.  It makes the idea behind 'Windows' laughable.

  And try to block and the copy is a nightmare of one window to the other.  Or even on the same page.  I try to block something and move away, and the "block" disappears.

  I thought it might be my mouse, which is your ordinary Microsoft Optical Mouse 2V.0, I went to devices and printers and formatted my mouse (I've never done this before) and my Microsoft Keyboard and recorded.  Nothing wrong with the keyboard.  The mouse just kept screwing as it did before, and I used your basic standard settings - nothing fancy or different.

  Now I write in this little place and nothing is to move, the mouse behaves - what IS IT?

  I am getting this problem in Windows 7 because honestly, I have no idea where else to put it.

  And I have just started with the problems.  Can you please, please, please help?

  I can't help but think that all the problems are related, so I'll put one little summary of what else is happening.

  1 out of nowhere part, I got a notice saying that I had to change the settings to allow Windows update immediately and without my permission (I think that's what he said and I know that there is a setting in devices and printers? or something like that where I allow edits without review)

  2. I can't convince my printer there is NO residential group and that I am the administrator and the only person using the computer.  This screw with my settings (wired) network too.

  3. I have a four-in-one printer (print, copy, scan and fax).  I am at home lately and will be years apparently, so I decided that I wanted to get the printer scanner and fax.  He was already printing and copying.  I turned off, unplugged and did not know that I had to uninstall all software and then reinstall it.  I don't have the time to do it again; I want a clean computer before you set up the printer.  Well, it seems to create small problems in the world.  I keep getting directed to devices and printers, but I want to read all the information before I uninstall just in case.

  4 modules!  They are the bane of my existence.  I do not understand what they are doing when I go and look at them individually. I tried to use IE10 without addons and it's just a big headache.

  5 constantly getting a yellow banner at the bottom of my screen asking me if I want to run * some * and I wanted to know the risks involved.

  6. constantly asked about Active X.  What is it and what does want of me?

  7. all of a sudden an hour ago, my computer has decided to go to "sleep" mode and wants me to change user for myself and when I do, it says it is locked, but I hit the beautiful image and it opens on the regular Windows screen.  WHY?  I don't use a screen saver and I got 20 minutes sleep mode which is just the entire dark screen until I touch the mouse.  No more!

  Guys do you see why I'm going crazy?  Help, please!  I spend all my days this last week and one before that trying to move things.  All this because I wanted my printer to scan.

  ···
  I'll open a window and then open another (at the same time) for a reason, and if I don't have my mouse entirely on whatever the window, it "disappears".  That is, it will become transparent with just sort of 'framework' around him.  The content is gone.  But they come back.  It makes the idea behind 'Windows' laughable.

  ···

  ^{Click Start or press the Windows key and type mouse but do not hit Enter. Search change how your mouse above control panel section.}

  ^{When this new pane opens, uncheck the Activate a window by hovering over it with the mouse. Click OK at the bottom to save your changes.}