Problems with a systems restore

Similar Questions

• What is the problem with my system restore?

  I tried to restore using various available dates and the message is failed to restore.

  [Transferred from Internet Explorer]

  I tried to restore using various available dates and the message is failed to restore.

  [Transferred from Internet Explorer]

  ====================================
  Sometimes other programs installed on your
  system can interfere with the system restore... usually
  a virus scanner.

  Do a restore of the system in Mode safe for a time
  before the problem started, may be worth a try.

  See the following articles:

  (315222) a Description of the Safe Mode
  Boot into Windows XP options
  http://support.Microsoft.com/?kbid=315222

  Safe Mode boot can be tricky... try tapping
  F8 repeated as the computer starts.

  The following article offers another way to start
  in safe mode:

  How to start Windows in Mode safe
  http://www.pchell.com/support/SafeMode.shtml
  (scroll down for: Windows XP / using the system)
  Method of the configuration utility)

  The following article offers instructions in the use
  The system restore.

  (306084) how to restore Windows XP to a
  previous state
  http://support.Microsoft.com/?kbid=306084

• Problems with the system restore

  Try to restore system using System Restore.  getting the error "system restore was not entirely successful.  The system files and settings on your computer did not change.  Details: An unspecified error occurred during system restore.

  Have tried several times and get the same result.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the workSafe Mode with network.

   

  To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• problem with the system restore when you try to back up disks

  my system crashed.  would not boot.  Several attempts later, went to the system recovery... do you have a full upward (23 dvd) then did a complete restore.  laptop works.  However restore my files from the backup disks does not work.  I get a failure in the system restore somewhere in the treatment of the disc 12 (out of 23).  Help!  sighing heavily... of course this happens when I am in a time crunch

  Hello cyberterp. I see that you are having problems to restore your data from backup disks. To make sure that I understand you were able to make the recovery of the operating system, but the data you have saved in the course of the process you're trying to get now?

  Check the bottom of the twelve disc and make sure that there are no scratches on it. If there is even the smallest scratch to find a local store that will shine the disc for you; This can allow you to read the data. If discs are in perfect condition and then either media are bad or there was a problem (unnoticed) during the backup process and it is unlikely that you will be able to recover the data.

• Satellite C40D-C - problems with the system

  I recently bought an a toshiba satellite C40D-C Series notebook PC as my old satellite - essentially - is dying. After you connect to the internet, I tried to download AVG Antivirus on my computer that I don't have - and never - trust McAfee anti-virus that comes with the computer. Every time downloaded AVG then restart my computer, the computer goes directly into the automatic repair system and doesn't let me do anything but to reset or restore. This has happened even with completely removed McAfee. I've been on AVG directly today (January 15), and they have to do remote set-up for me - with the same results. Yes, I'm aware that McAfee is a selfish cry of a system and refuses to acknowledge any other antivirus, but that this issue happens even with completely removed McAfee shows clearly that it is something that Toshiba has worked in the system. I can't even disable the automatic repair tool. I have to be stuck with a McAfee antivirus which, moreover, does not yet or is Toshiba will make an effort to help solve a problem they caused?

  Why this computer isn't allowing AVG Antivirus work? And why, after each attempt to download AVG, the computer goes to auto repair whenever I shut down or restart? Is this a problem with the system or something, Toshiba has done on purpose?

• The problem with backup and restore.

  In my Center of the open action, I get a message that I have a problem to solve.

  It always comes after I saved, but that tells me that my PC has been restored to an earlier date. (I have never done)

  This affects my McAfee Security turn off wall of fire etc virus checker and my old AVG appears again.

  I inform McAfee they reset my firewall, auditor of viruses etc and all is well until I try a back up again.

  When I go to change my setting or go back I always get back up to a failed.

  But even I don't want not to my PC restores his car at an earlier date, putting me in a loop.

  This affects my McAfee Security turn off wall of fire etc virus checker and my old AVG reappears.

  Hello

  He would have had nothing AVG remaining before installing McAfee.

  Having 2 programs Antivirus installed can cause blockages of the system and other weird problems with the system.

  Use the AVG removal tool to remove the remnants of AVG:

  http://www.Avg.com/us-en/utilities

  Choose the correct version of "bit".

  See you soon.

• OfficeJet pro 8620: officejet pro 8620, error: problem with ink system

  During the initialization of the printer, after that I inserted the ink cartridges, I get the error: "X-problem with ink system... I followed the directions: "lift the latch on the print carriage, reinstall the print head and then remove the cartridges and inspect leaks." Do not use cartridges that leaks. If the cartridges are OK, re - install. After you have reinstalled, turn the printer off and then back on. »

  Well it don't turn off the printer... I get another message: "the printer initialization and the ongoing calibration.» Do not put off the printer or turn off the power during this process. »

  I repeated this process on 6 or 7 times with the same result.

  I use "cartridges Setup" he claims.

  Help, please!

  Thanks in advance...!

  Johnny

  Hi @JohnnyLee,

  Welcome to the HP Forums!

  I understand that you found the error, the problem with ink on your HP Officejet pro 8620 system. I'm sorry to hear that, but happy to help!

  I recommend going through this guide, printers HP - "Problem with print head", "Printer failure", "Ink system failure", or "0 x." r "C2."... "Displays Message error.

  If the guide does not help, please call our hotline at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

• Anyone who has a problem with the system crashes when importing using the new interface to import

  Anyone who has a problem with the system crashes when importing using the new interface to import

  Can specify you what Adobe program you use so that we do that your post is in the right forum?

• New creation problem with Vista HP restore point

  My laptop, a sony vaio VGN FE-890, developed all of a sudden a group of problems, slowdown, programs responds not, printer won, t etc load.

  I'm doing a system restore but all my restore points went off the menu except for a restore at the present time and date. When I try to create a new restore point it will only ask for a name, and then creates a new restore with the date and the current time point. I need to restore to a week or more in the past. What I am doing wrong?

  If you don't see more of 1 restore point, that's all you have. If each time that you create a new, the previous 'disappears' my first suspicion is that you don't have enough space allocated to store more than 1 restore point. This article tells you how to investigate your system restore benefits:

  http://blogs.TechRepublic.com.com/window-on-Windows/?p=1077&tag=nl.E132

  This article is general information about the system restore:http://www.davescomputertips.com/newsletters/2010/101101.php

  If this isn't the problem, the next thing I see is that you have some sort of automated process of 'cleaning up' configuration 'extra' restore points. This seems to be a remote possibility because most of the cleaning tools are not triggered by the creation of restore point, but I suppose it could be possible.

  There are many utilties of freeware that make the management of restore points a little more friendly that the native windows tools, here is a link to one of them:

  http://www.thewindowsclub.com/System-Restore-Manager-for-Windows-released

  Please click on the "useful Vote"button! ".

  If this proposal of solution solves your problem, please mark it as propose as answer to let others know the solution that worked for you

• Error with XP system restore

  I'm trying to do a full system on a Compaq Presario 6000 (6320US)
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00009596&tmp_task=prodinfoCategory&cc=us&DLC=en&LC=en&product=213896

  Yes, it's an old computer, I know. : P

  In any case, the problem is that I started the restoration process, got on the second CD and as soon as he tries to read it, I get an error that says: "4194304 0 f:\res256\banner.bmp.

  Now I have already done a lot of research, and said all I think that this problem has already been brought to the top the same two things:
  (1) the cd may be dirty or damaged
  (2) the cd player doesn't work maybe not properly

  1 seems unlikely given that the cd is Mint and about as clean and unharmed, as a cd can be. 2 seems a little more plausible given that I'm using a cd player, I installed after purchase (initial cd player no longer works) and make a system restore can be remove the drivers that allow it to operate. But if this is the case, why he would stop at the 2nd cd? I've seen other people with the same problem in the same exact step in the process, but nobody seems to never come back on the forum to say, "Yes that was the problem and here is how I fixed it."

  Any help would be appreciated. I'm trying to get this computer working for room of my 10 years so he can do the job at home safely, and we both love for that to be resolved quickly.

  Hello JakCapan,

  Have you involved HP/Compaq on this issue?

  If we are unable to complete the restore to factory without problem, then there are two possibilities:

  1. There is a hardware problem.
  2. There is a problem with the recovery disk.

  Let us know.

  Best regards

  Matthew_Ha

• How can I fix what's wrong with my system restore when it is 'failed' to restore of any "Restore Points?

  Well, what is said.  I see all kinds of "restore points", highlighted in the restore calendar page.  But any day or I choose to restore point, the result is the same.  "Unsuccessful system restore" computer is returned to the...  (I don't know how they phrase it exactly, but the key is exactly the way it was when I started with optimism the restore process.)

  What is your system brand and model?
  What is your Version of XP and the Service Pack?
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)?  System Restore is not a time machine.
  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.

• Problems with update and restore blackBerry Smartphones

  Hello I'm a newbie here, but have some problems with BB Bold 9900 updated.

  During the update alls datas were recorded as usual during restart the BB there's an error to come, means that BB lost its operating system. I used the tips here and somwhere else to restore successfully. Unfortunately the data stored during the update process have not restored, even if the file already exists on my PC.

  The file is called LoaderBackup-(2013-09-26) .bbb - so almost similar to the usual backup file.

  Ho do I restore the data now?

  Thank you much for the help.

  Hello and welcome to the community!

  Please see this KB:

  • KB13428 How to back up and restore data from smartphone BlackBerry using BlackBerry Desktop Software

  Good luck!

• Problem with the systems

  Hi, I have a Hp pavillion dv 6426us, recently sometimes it freezes, and I have to turn off manually. I use firefox and it oftens gel too (not), it happens every time I use it for a few seconds or more, I have tried to reinstalled firefox and it still does this. even other programs like anti - virus, yahoo Messenger, nearly every program I use will do (no response) for a few seconds before it works. So I think I have a problem with the computer, what do I do to fix this? Thank you

  I backup your personal data and restore the system to factory condition. This will clear up all software problems.

• Satellite L50D-B-15Z problem with cooling system

  Hi, I have a laptop about a year ago. And for 5 months, I have a problem with the fans. Out and the following message is displayed:

  WARNING: A problem with the cooling system has been detected. Please turn off the power immediately and return it for service.

  The strange thing is that the first time that is spent stopped working a week, then a month and finally stopped working until 3 months there now will not start.
  I have even the implied warranty of the product, but I didn't think to send because it takes virtually every week for classes. I can use it, but if I perform actions that require superior performance as playing the games or download several videos at the same time to start warming up, getting the message and if continuous closed finally down.
  What should I do and how can I solve the problem?

  Sorry if I do not quite understand. I do not speak English.

  There may be dust stuck in the heat sink.
  using compressed air to blow dust through the vent.

• Re: BIOS version 3.30 Tecra A11/M11: problems with Ubuntu systems?

  I just got the updated BIOS version 3.30 on my Tecra A11/M11 invitation.
  I'm still under Win7 now, but plan to add a dual boot with Ubuntu when the next LTS strikes in April.

  Is anyone having problems with the new BIOS?
  Should I upgrade or leave intact 3.20?

  I don't find any evidence of trouble with 3,20.

  Why upgrade BIOS if everything is OK?

  In addition to as much as I know that Toshiba can't stand not the Linux operating system, and I doubt that the new BIOS would improve any Linux performance so, if you are satisfied with the version 3.20, stay with that