Problems with Lightroom after installing Windows 10

Similar Questions

• problems with sound after installing windows 7

  My sound/audio does not work on my HP Pavilion dv2023tu notebook after a clean installation of windows XP.

  The convenience store said there is a problem with the driver, but I can't find a new driver through windows update, and HP does not either for my model. The device installed on my laptop is called high definition Audio Device. Can anyone help, if not, where can I download the drivers from. It is better to buy driver update software to help locate the right driver?

  Hello

  A lot of Vista for Windows 7 drivers, so try the following.

  Download the Audio driver from the link below and save it to your desktop.

  FTP://ftp.HP.com/pub/SoftPaq/sp34001-34500/sp34387.exe

  Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation.  If the driver installs successfully, restart the computer and check your audio files.

  Kind regards

  DP - K

• problem with sound after installing windows 8.1

  Hi, I have dell vostro 1400 and I installed windows 8.1 a few days before and since the sound does not work in my machine! tried to uninstall the audio and installed again, nothing... set driver update audio driver... nothing as well, even I uninstalled windows and installed again, but no sound comes out, any help please because I'm depressed and don't know what to do?

  THX

  Hi nashnash15,

  I checked the system specification and supports Vostro 1400 are Windows XP and Windows Vista 32 Bit operating system. However, this system has not been tested with Windows 8.1 and would usually rely on generic drivers of windows updates.

  If in cases that do not work, you may need to return to the old operating system.

  Let me know if you have extra help.

• Problems with sound after installing Vista Ultimate SP1 on HP Pavilion Dv4

  I lost sound after installing Vista SP1 Ultimate on my HP Pavilion Dv4... everything was fine before. Help, please.

  Go to the HP support website and search for Windows Vista drivers for your specific model number. Also look for recent updates, even if your PC comes with Windows Vista preinstalled.
  http://welcome.HP.com/country/us/en/support.html

  If there are Vista drivers then download to a folder on your hard drive and install all of them, starting with the installation card mother/chipset drivers, then the SATA, LAN, Audio, drivers and other device drivers.

  J W Stuart: http://www.pagestart.com

• Problem with wsconfig after installing APSB07-02

  After installing the patches on APSB07-02
  I get this message?
  "Servers JRun (s) found on host 127.0.0.1 should be upgraded to use this version of the web server configuration tool."
  
  It is an own CF MX 7.02 in multi server, jrun update 6 installation, all the patches of jrun since updater 6
  
  TIA

  I found the problem, it is with the 62070_64614.jar hotfix

  http://www.Adobe.com/cfusion/knowledgebase/index.cfm?id=f9db1285
  JRun 4 Updater 6: fix for remote transactions

  Add each hotfix one at a time and it broke all.

• Satellite U200-141: problem with drivers after installing Vista

  Hi all

  I just installed Windows Vista, and I'm having some problems:

  1. shortcut keys do not work (Fn + F1, f2, f3, etc does not at all).

  2 Touchpad - I have already installed driver listed it under Vista, but although I can use the touchpad, normally when you point, rattling, etc., I can't scroll. I mean, I can't set up the scroll area (it has been the right corner to scroll vertically and bottom to scroll horizontally). I checked the options of auto-scroll on IE and Firefox, and it does not work here.

  3. I don't seem to be able to install the new BIOS.

  4. the internet, play, pause, stop, etc., (embedded) buttons do not work either.

  5. I have the product recovery CD but this is for Windows XP and I don't know how to install the drivers to go from there.

  I'd appreciate any help anyone could provide.
  Thank you.

  You cannot use the notebook unique features because you have not installed the drivers VISTA required.
  And you can not install Vista drivers Vista drivers are not available at this time

  So what to do? Either you use the Vista without the additional features like buttons etc. or you use the supplied recovery CD and install XP

• I can't open Adobe Photoshop CC or Lightroom after installing Windows 10

  I installed Windows 10, now none of my creative Cloud applications will open.

  You can only update Adobe with administrative privileges. There are several ways to do this and it also depends on if you are running with UAC active.

  If you are administrator of the PC and the UAC is enabled, right-click on the program and select run as administrator - which should then run the update.

  If running with UAC disabled and that you are not an administrator, then use the START/PROGRAMS to the required start menu item, press and hold SHIFT and right mouse click on the required program, select run as other user. Enter the user name and password of a user with admin for PC rights

  You can also open a command prompt and use the runas command it is to say, start a command prompt and enter-

  runas / user: youradminusername "c:\program files\path executable.

  You get so youradminusebame password prompt

  The only issue here is that you must make sure that the path to the program being accessed is available for the youradminusername IE. He is not in a user profile (I copy it to c:\temp or public profile folders.)

  Software authors will have to adapt their procedures to update on the PC company that most perform not not users with the admin on the PC rights. This reduces calls to technical support for malware and illegal software that users can install is simply what they want without the assistance of administrators. Personally, I create a user in active directory and add this user as a local administrator on each PC. I then disable the account in active directory. If someone wants to install a program or an update and I cannot attend or have access to PC then activate the account created, give the user the password to use in what precedes and then disable the account once the update is complete...

  Adobe take note - please produce a procedure where by standard non-users can update your products...

  Creative cloud needs administrator privileges to install

  Concerning

  Stéphane

• Stream laptop HP 13: can't move with touchpad after installed windows 10

  I can't use my touchpad to drag (or move a window or a window size) after the installation of Windows 10

  I have looked for updates, updated my setup and the problem is solved

  

• Problem with Lightroom after importing new photos

  How is it my recent photos (only from photos taken in October) "black" a suite import to ligthroom? Everything is fine with the original raw files and I do exactly as I usually do. I have the latest edition of Mac OS X on my Mac and I just installed the latest updates for Lightroom

  HiHanson

  Please refer to this article thumbnails appear black in Lightroom CC 2015.2/6.2

  Let us know if this helps

  Concerning

  ~Assani

• problem with MAX after installing LABVIEW 10

  Hello everyone, I have a serious problem I installed labview 10 yesterday on 2 laptops, one of them works perfectly, however, the other gave me a two erros

  1.http://digital.ni.com/public.nsf/allkb/6CA56E2DDBCCA06086257591006141EE

  2. http://digital.ni.com/public.nsf/allkb/F24AA9FB6A3A0E9D86257539006141BE

  I tried the solutions above in the link, but it was all futile. can someone please suggest me what would be the problem? I had already LV8.0 on the laptop which is the cause of the problem. I tried to re - install the disk driver given

  for me by NEITHER, but no luck.

  When I started the laptop for the 1st time, there was a mistake in saying DOS command prompt: DATABASE ERROR and I cancelled the error!

  In addition, Labview works fine, its only MAX who has problems. is there a way I can only MAX to uninstall and reinstall? Please help me...

  Thank you

  Sorry CrackJack

  Try this one http://digital.ni.com/public.nsf/allkb/86256F0E001DA9FF86256FFD005B827C?OpenDocument    

• Problem with restore after installing IE9

  I had upgraded to IE 9 and my pc started running slow, then he must be stopped when I went to my sites. So I decided to restore to the point before the download. Now my pc boots but I have a black screen. Anyone know why and how to fix it?

  Hi tasjac0

   

  Method 1 :
  You can check if you are able to start properly in safe mode. In safe mode; you have access to only the drivers and base files. Check out the link to start the computer in safe mode and then check-
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  
  Method 2:

  You can check if you can use the last known good configuration. It's a Windows startup option that uses the most recent system settings that worked correctly. Whenever you turn your computer off and Windows shuts properly, important system settings are saved in the registry. Then it starts Windows with the last configuration of registry and the pilot who has worked successfully.

  Please refer to the below links to get help on the issue.
  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

   

  I hope this helps.

• Problems with sound after loading Windows 7 Ultimate

  I just loaded Windows 7 ultimate on my HP Pavilian m7100y.  I have no sound, the monitor is an HP vs19c and trendy top speakers.  Can someone please.

  Hello:

  See if this driver works...

  Accept the agreement, download and install the first driver on the list if you have installed W7 32 bit, second driver on the list if you have installed W7 64-bit.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• Problems with laptop after uninstalling Windows 10

  I like others had the free update and had nothing else of grief.  Given that I uninstalled my computer crashes when you try to go between different windows.  Can not defragment as it says 'she runs on another program' help!

  Hello

  I suggest you try to reboot the PC once and check if it helps.

  We will follow these methods and check if it helps:

  Method 1:

   

  You can try to clean boot in order to check whether a third-party software is causing a problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7.
  http://support.Microsoft.com/kb/929135

  Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 of the KB article.

  Method 2:

  I also suggest you optimize Windows 7 for better performance and check if that helps.

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Hope this helps,

• HP ENVY 15: Problem with audio after the Windows 8.1 update

  Hi, I'm on HP ENVY 15 notebook PC and I updated my windows 8 to 8.1. Until a few days back, everything was fine. However, now, I have no audio through speakers or head phones. Can someone help me please to solve this. Thank you.

  Product number: E4N80EA #ABZ

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver from the link below.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63408.exe

  Once the reinstallation is complete, shut down the laptop by pressing the SHIFT key when you click Shutdown to temporarily prevent a hybrid boot.  Then disconnect the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• Satellite Pro U200 - no sound after installing Windows 7

  Hello

  I have a problem with sound after installing Windows 7 on a (PLUA1E) satellite Pro U200. No Win7 audio driver available on the Nordic pilot site. Help, please.

  G.Magnason

  Hey Buddy,

  Have you already checked the site Web of Toshiba itself?
  http://EU.computers.Toshiba-Europe.com

  I found a driver for Vista 32 bit and Vista drivers most also work on Windows 7 so it s worth a try! :)