Problems with the dash invite you - 11.1.1.6 on Win 2008 64 bit

Similar Questions

• Problem with the resolution when you connect to a projector

  I regularly used my laptop connected to a projector via a cable VGA for PowerPoint and video clips view in Windows Media Player.   It is automatically detected and adjusted for different sizes of screen of the laptop screen (1366 x 768) and projector (1024 x 768) and projected with success.   Recently I connected the laptop to a second monitor - also 1024 x 768 - instead, and even once, it fits perfectly.

  It suddenly stopped setting for the resolution of the projector; When I go to the resolution of the screen, the option to set the resolution of the second screen is grayed out.   No matter if I use extend or duplicate, he insists that the two screens are 1366 x 768.   This has happened with two projectors, all two used to work properly.   I also tried different VGA cables.  The end result is that the image of the projector is hurry to tray.

  I can connect fine to the second monitor via the VGA port and sometimes with different resolutions for both screens.   I can also connect to a TV via an HDMI cable.   I can't try a HDMI cable for the spotlight as it is ceiling mounted, and the other is old and is not an HDMI connection.

  I checked the drivers and they seem to be up to date.

  My laptop is a Dell Latitude running Windows 7.   The graphics card is an Intel HD Graphics 3000.   I tried many suggestions already given on these forums without success.   The real puzzle is that it was working fine and nothing I can draw has changed except that I connected on the other monitor.

  Hi Tony,.

  Thanks for the reply with the status of the issue. I'm sorry to know that the issue is still unresolved, your efforts to solve this problem are much appreciated.

  I suggest to follow the method below and check if that helps:

  Method 1: Perform a system restore.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  System restore WARNING: when you use the system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Method 2: Uninstall all hidden devices:

  Step 1: See the article below to activate the devices hidden in Device Manager.

  Look at a hidden devices

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553955 (v = vs. 85) .aspx

  Step 2: After you enable hidden devices, remove devices from Device Manager.

  1. press start.

  2. type device manager in the start search box.

  3. Select Device Manager in the search result.

  4 uninstall everything that are grey also uninstall the drivers to display completely.
  5 restart the computer and install the drivers to view the manufacturer's Web site.

  Hope this information helps, just reply to the State of the question to get help.

  Hi Rizwan

  Unfortunately, I do not have a restore point old enough until the problem occurred.   I have not found any that was relevant in hidden devices, but in normal Device Manager mode when I clicked on "monitor" it opened a "Generic PnP" entry even when there was no extra monitor or projector fixed.   When an additional monitor has been attached, there were two of these entries.   I disabled them both, and I found that I can now adjust the resolution of a second monitor to a different setting of the laptop screen.

  Thanks for your help.

  Tony

• dotnetfx35setup.exe install problem with the program that you try to run vs_setup.MS_

  I went through almost as many links and troubleshooting as I can handle.  Downloaded the full package (dotnetfx35setup.exe) for .NET 3.5 and I get the same error.

  I am perfectly aware that the file .MS_ should actually be a. MSI (Microsoft Installer) file, but the question here is "why this package tries to run vs_setup.ms_ instead of vs_setup.msi?"

  Other issues are the following:

  Tried to extend the file .ms_ in a .msi file, and then tried to run this file, nothing is done.
  Tried to copy the .ms_ file to a file named .msi, then try to run this file, nothing helps.

  What happens on Windows Vista Ultimate Edition.

  Any ideas or comments would be VERY USEFUL.  I worked on this issue since 04:30 and it is now 10:18.

  It was apparently only reported on the patch KB951847 .NET and had nothing to do with the .net Framework 3.5 to my system is KB959209 which after uninstalling and reinstalling, removed the update of the framework .net to be needed in my Windows update history.

• Problems with the cursor when you type

  I don't know if it's something in Vista, but I have terrible problems in Word and when typing emails. I can touch type and normal type without looking at the screen. However, I find when I look at the screen, the cursor inexplicably himself stuck about4-6 rear lines and hit the last piece in the middle of the existing text. In fact it just happened again - when I type ing he climbed to the title: why!

  I feel responsible because I don't get it in the older microsoft software that I use at work and it has never done in internet cafes - didn't have it a few months, but it drives me crazy: why it does this?

  Patjom, make sure that you do not have to hide when you type the value of the mouse pointer. Here are the steps:

  Open mouse by clicking the Start button, click Control Panel, clicking hardware, and then clicking on the mouse.
  Click the Pointer Options tab, and then do one of the following:
  Uncheck the Hide pointer while typing Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with the date when you load the XML file into Oracle Database 10g

  Hi all
  
  I have the interface as shown in the screenshot below. In this document, among other things, I am mapping to an element XML file representing a date to an Oracle table column defined as DATE. The source and target columns are highlighted in the screenshot.
  
  ! http://img223.imageshack.us/img223/1565/odiscr275.jpg!
  
  When I run the interface, I get the following error message:
  
  java.lang.IllegalArgumentException to java.sql.Date.valueOf(Date.java:103)
  
  I guess that this is the conversion of the date!
  
  I already tried to replace SRC_TRADES. DEAL_DATE with TO_DATE (SRC_TRADES. DEAL_DATE, ' DD/MM/YYYY') on the implementation tab. This feature was not recognized when I executed the interface, so it did not work! The value of date in the XML file is in the format DD/MM/YYYY .
  
  I guess that Date SQL Oracle functions do not work in the implementation tab. Could someone let me know:
  
  1. what the Date Conversion function I could use instead?
  2. where can I find a reference to the methods/functions that I use in the implementation tab (if such a reference exists)?
  
  See you soon.
  
  James

  Hello.

  Try changing the area of execution at the staging area. Once you change it, write in the map box just SRC_TRADERS. DEAL_DATE. When you use TO_DATE, the source field typu should be varchar2, no date (as it is in store for your data source)

• Problem with mouse pointer lag (Ubuntu 9.10 guest, host of Win 7 32-bit)

  I'm trying to run Ubuntu 9.10 as a guest for VMware Player 3.0 (Windows 7, 32-bit host). Installation works well but is in fact unusable because the mouse pointer has an offset, hence the development of real mouse is. that is if you click on an element when the mouse pointer is shown, makes you click on something different. The mouse pointer is above and to the left of the actual point where the focus is (i.e. where you "click on"). I can see elements get highlighted when moving the mouse somewhere near them, but a click actually selects another item. It worked well (even Ubuntu version) while VMWare Player worked on a host of Vista. Strange behavior began after having upgraded from Vista to Win7 (I have reinstalling VMware player after the upgrade and had to recreate the Ubuntu VM).

  Just what is wrong advice?

  read http://communities.vmware.com/thread/244677?tstart=0

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• Problem with the start of VMware ESXi 5.0

  I just installed VMware ESXi 5.0 on a new Cisco UCS B200 series blade with two 300 GB hard drives configured in a RAID 1 mirror.  I went through and completed the installation of VMware ESXi 5.0 on this server.  When the installation is complete and the server restarted, he did not initiate the ESXi where I can change the IP address and VLAN.  Instead, I get this text string after the initial boot sequence that is shown in the attachment.  I have a guest who said Shell > do not know why I can not start correctly in ESXi 5.0.  Thank you!  Paul

  Hi Paul,.

  Looks like you boot to the EFI shell. What is the startup policy that you have configured on this server service profile? It should look like the one below.  If there is a problem with the boot order, you should be able to type "EXIT", then enter on the EFI shell to exit the prompt. If your startup is similar to the one below and you still experience this issue, try to downgrade and re - ack the blade.

  Let me know if it helps.

  

• Problem with the touchpad: Tap to click does not work if I use a standard account

  Hi all

  I have a problem with my laptop that I don't understand and I need help from the community.
  As the title says... If I connect to my laptop using a standard account the touchpad does not work if I try to tap to click. Left and right buttons work, move the slider works, works of scrolling, but endearing tape... not even a single tap. If I log in with my account as an administrator, the touchpad works like a charm, no problems. Tap to click and everything you want. If I disconnect the admin account and sign in as a standard user, the problems are back again. I can move the cursor, click on the two buttons (left, right), but I can't type to click...

  I tried to reinstall the driver for the touchpad (which is MOMENTUM...) but it did not. I tried to see if there is any option that can prevent this tapping or something... but in the control panel > Touchpad > Tap is turned on. A strange thing in the control panel of the Touchpad is that [when loggend as a standard user] I get an error "unhandled exception has occurred in your application. If you click on continue the application will ignore this error and attempt to continue. If you click on exit the application will close immediately. "and a new line saying"index was outside the bounds of the array. If I click on continue the error disappears, but reappears if stationary "double-tap" enable/disable option. If I click on leave the Touchpad Control Panel closes...

  All this trouble occurs only when I use the standard account. With the administrator account, I don't get any errors so I soar options, disable them, activate them and most importantly, the tap to click works.

  What is the problem with the standard account?

  I have Windows 7 Home Premium 64-bit Service Pack 1.

  Can someone help me please?

  Hi Johnxf,

  ·         Did you do changes on the computer before the show?

  As he works in an administrator account, then probably your standard user account have been damaged and would need a fix.

  Follow the article provided below to fix the corrupted user profile:

   

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Let us know if that helps.

• Problem with the shortage of pilots on Pavilion G6-2260su

  Hello

  I have some serious frustration due to problems with the material of this thing.

  I istalled windows 7 64 bit Ultimate edition with service pack 1

  However, much of the material is not recognized - in particular the NIC / wireless.

  I downloaded all the drivers/software from the hp support page but the following materials are still uninstalled:

  Bluetooth controller

  Ethernet controller

  Network controller

  PCI device

  SM Bus controller

  2 Bus USB controllers

  Unknown device

  When I try to install the driver for wireless network / on site he is saying that the material is not pluged and it closes.

  Help, please!

  Hello:

  You must install the driver for chipset on the link below. Download of Frist will take care of most of these devices.

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

  Video:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-105905-1&mode=4&IDX=1&prodTypeId=321957&prodSeriesId=3688868

  Audio:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5212912&prodNameId=5212913&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-110838-1

  Ethernet:

  Download and install the 6th on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTy...

  Card reader:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102008-1&cc=us&DLC=en&LC=en&OS=4063&product=5199538&sw_lang

  Unknown is probably the following:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-82853-1&cc=us&DLC=en&LC=en

  For other devices, I need material ID to find the correct drivers.

  Please post them.

  If you don't know how to find the hardware ID, please read the info on the link below for advice.

  http://www.DeviceDriverFinder.com/blog/device-drivers/how-to-check-the-hardware-ID-for-a-Windows-device

  Paul

• JDeveloper 11 g: problem with the installation of JUnit extensions

  Hi all
  
  I have problem with installing JUnit extension of JDeveloper 11 g Release 1 (11.1.1.3.0).
  
  I spent the first steps from here: http://www.oracle.com/technetwork/articles/adf/part5-083468.html (verification of updates, select BC4J JUnit integration and JUnit, finishing), but after restarting the IDE I don't see JUnit extensions in the window of the JDevelopr 'Help'-'About', 'Extensions '.
  When I tried to create the unit test, I didn't see the menu item "Unit Tests" in the new window of the gallery.
  
  What could be the reason for such thing?
  
  Anatolii

  Hello

  I also had the same problem with the Jdeveloper version you are using. It looks like a bug. To work around this problem, I downloaded the form from the following site

  http://www.Oracle.com/ocom/groups/public/@OTN/documents/WEBCONTENT/131167.XML

  And manually installed with JDeveloper-> help-> Check For Updates-> select the option at the last, install from a Local file and select the file that you downloaded from the site above.

  Kind regards
  Nathalie.

• Hello there is a problem with the iphone 6 and you do not want to connect to the Apple Store

  Hello there is a problem with the iphone 6 in more you won't connect to the Apple Store.

  

  Buenas tardes,

  Try a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. Ignore the "Slide to power off" text if it rises. You won't lose anything.

  Then sign out of the iTunes Store and reconnect.

• How can you check if you have a problem with the ghost attack

  How can you check if you have a problem with the ghost attack.

  My ISP (Virgin) sent me a letter saying I could have an attack on my apps by the phantom virus.

  How is this true and what can do

  The XcodeGhost malware affects the apps, mainly Chinese, created using a red version of Xcode.  It is not a 'virus '.  (Look at the difference between computer viruses and malware).  Remove the Apple listed here and get updated with the latest versions of the App Store.

• Problem with password reset link - "there is a temporary problem with the service. Please try again. If you continue to receive this message, try again later. »

  Hello, account Windows Live from my wife was hacked a week ago and has been used to send many spam emails. As a result, his account has been disabled or closed (we are not sure). Whenever she asks to reset a password and a link sent to a different e-mail account, when she clicked it gets this message 'there is a temporary problem with the service. Please try again. If you continue to receive this message, try again later. "She is tried repeatedly, but get the same message. Someone knows how to go beyond that, so she can recover her account? Thank you.

  Hello BBB34,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• After submitting my info, I had the SERVER ERROR: 500 internal server error! There is a problem with the resource you are looking for, and it cannot be displayed. :

  Over the four days, I've lost two e-mail accounts:

  1 * e-mail address is removed from the privacy *

  2nd * e-mail address is removed from the privacy *

  I went to www.windowslivehelp.com

  I filled in all the information and answered all the question. I provided

  the email address where I can be reached: * address email is removed from the privacy *

  But when I click on submit

  "The display shows:" Server error

  500 internal Server Error. There is a problem with the resource you

  can are looking for, and it cannot be displayed' you explain or tell me

  How can I return my email accounts. Thank you and best regards

  B.Okediji sanogo

  {deleted}

  E-mail address is removed from the privacy *.

  Hi Zacheus B.Okediji,

  1. what web browser do you use?

  2. when the problem started?

  The website you are visiting had a server problem preventing the display of the Web page. It often occurs due to maintenance of the site, or due to a programming error on interactive websites that use scripts.

  For more information, see the following article:

  Get help with the Web site (HTTP error) error messages.

  If you use Internet Explorer, you can read the following article and try steps 2, 3 and 4 to solve the problem.

  Internet Explorer is slow? 5 things to try

  Note: Resetting the Internet Explorer settings is not reversible. After a reset, all previous settings are lost and cannot be recovered.

  You can also visit the following links to support Windows Live:

  "Server too busy", "Internal Server Error" and we do little maintenance to improve the service.

  Internal server error when trying to open hotmail

  Hope this information is useful.

• Hi.I download Microsoft Security Essentials and installation becomes a problem with the code: 0 x 80070643. If you can help me...

  Hi.I download Microsoft Security Essentials and installation becomes a problem with the code: 0 x 80070643. If you can help me...

  Support Microsoft Security Essentials forums
  http://social.answers.Microsoft.com/forums/en-us/category/MSE

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft