Problems with video tutorial - stretch arm Robot after effects

Similar Questions

• I'm having a problem with the text appears correctly in After Effects.

  I have reset the character unsuccessfully Panel and I reset the computer. Ideas for what is wrong would be very appreciated.

  

  Looks like a 3d layer. It's that intersect with the lower layers?

• Problem with video player

  Hi experts,

  I'm under 2 problems with video player in my application:

  1. the backlight turns off automatically after 30 seconds by default during playback of a video file.

  2. impossible to adjust the volume, he always plays with the highest volume.

  When I try to play the video by media player integrated BB Bold, the volume is adjustable and the backlight is on during the display of the video. Is it possible to do the same thing in my application?

  Thanks in advance,

  Kind regards

  Binh Nguyen

  -For the first problem, you will need to set the backlight to yourself in the code, something like:

  If ((Display.getProperties () & Display.DISPLAY_PROPERTY_REQUIRES_BACKLIGHT)! = 0)
  {
  Backlight.Enable (true, 20);
  }

  Be careful about the number of seconds that you pass to the enable(). They are tp limited 255 seconds even if you spend a lot. This means that if your video is longer than 255 seconds, you must call the activate more than once. I usually call it the timer as well as check the status

  -For volume control, the player does not meet the default control buttons. You need to implement it in your code.

  Set the class of player that you use to implement the method as follows:

    protected boolean keyControl(char c,int status,int time)
      {
          if(c == Characters.CONTROL_VOLUME_UP)
          {
              //IncreaseVolume;
          }
          else if(c == Characters.CONTROL_VOLUME_DOWN)
          {
              //decreaseVolume();
          }
          return super.keyControl(c,status,time);
      }
  

  Where the increseVolume is something like:

  If (_Kit! = null) //_vc = player VolumeControl
  {
  _vc.setLevel (volumeLevel);
  }

  Rab

• Still having problems with my perpetual license Adobe CS6 after CC

  Hi everyone, I still have problems with my perpetual license Adobe CS6 after upgrade to CC and terminate my subscription. I did it in October, and of course he had regained all my applications CS6, making it unavailable. I was advised to uninstall my Adobe (CS6 and CC) software and then reinstall my CS6 collection here. I did and as it has helped my Photoshop, all my other apps still get the same dialog box, I received before; telling me to renew my subscription to the CC. It will not happen, all I want is work and back collection CS6. Any help would be appreciated.

  After uninistalling cc, you should vacuum by the use of the Adobe Creative Cloud cleaning tool to solve installation problems, restart your computer and then install cs6.

  you might try starting the vacuum now (to clean the cc) after installing cs6 to see if that helps.

  Open your problematic cs6 programs, and then click Help > activate.

• Hi guys, I need to create inlays video similar to this video and I wonder if After Effects is what I need to do this.

  Hi guys, I need to create inlays video similar to this video and I wonder if After Effects is what I need to do this.

  Here is the link to the video https://Vimeo.com/148280092

  Anyone has any idea if After Effects is what I need for this?

  It depends on the amount of work you're talking about. Many works were by writing the scenario, shooting footage of quality, choose a good music track, the track of the music editing, edit the images of music, etc. before she even had the hands of the AE artist. If you speak only the work of EI, I suppose it would be less than a week, but more than a day. It depends on how much of the look has already been set. Someone has to take this yellow circle with lines through it as their reason for basic design at some point.

  If they gave me the finished edit and the base brand eye/guidelines, I expect to take two or three days to do depending on how picky, I was in nailing the details. The problem is that if someone else has the change, they could have caught the bad shots and I might have to do some rotoscoping and then he could easily balloon in a few weeks!

  I guess that the one who does the work has had enough time to work on it. Because if they had more than a few hours, they would have removed the clichés of the CRAFT of 0:48 0:52. Heck, if you have Pro mocha with the deletion module, which wouldn't even take an hour to remove.

• Problems with video files on 8 gb microSDHC

  to understand my problem, you should first read the following problem.

  [thread quote: http://forums.sandisk.com/sansa/board/message?board.id=sansafuse&thread.id=5849]

  Incompatibility issue with technology Kingston 8 GB microSDHC memory card and playing video files. ASIN: B001CQT0X4 SDC4 / 8GB

  I recently bought a Kingston 8 GB microSDHC card on Amazon.com technology for my 8gig Sansa Fuze (the 1.01.15 firmware version). I formatted the card while it was plugged into my rocket through Windows XP. Charge of some songs and a video file to the ext memory card.

  During playback the video has been dried then blocking at least one minute, causing the fuse to be reset. The music seemed however read (even if I don't concentrate on the test of music files). I worked with Amazon to replace the card with another card of 8 GB of Kingston, and had exactly the same problem.

  [/ quote]

  I have the same problems with a platinum 8 GB class 4 microSDHC card. Now I formatted the card in fat32 and the problem seems to be resolved.

  It will be easier to mention what memory cards can be used in the rocket.

  Hi all,

  I want only to inform you:

  Now, I found a memory of 1 GB SanDisk microSD Card in my collection of memory card. I copied the two films on this subject, put it in my works fine fuze and als. Now I'm looking for a microSD SanDisk 8 GB SDHC memory Card, which is not so large.

  After that I changed the card memory, I will report.

  Good day

• HP 250 G3 - J4T62EA: problem with video card

  Hi, today I bought a Free back of HP 250 G3 - J4T62EA version. I installed Windows 7 64 bit and the drivers located on the HP website. I am facing a problem with my video card in the video display. In the video window, in any program, top of the video seems to move at a different speed, resulting an image of scrumbled. Is it a software or a hardware problem? The id of the map is:

  PCI\VEN_8086 & DEV_0A16 & SUBSYS_2211103C & REV_0B
  PCI\VEN_8086 & DEV_0A16 & SUBSYS_2211103C
  PCI\VEN_8086 & DEV_0A16 & CC_030000
  PCI\VEN_8086 & DEV_0A16 & CC_0300

  Fingers crossed for a solution )

  After you have installed windows 8.1 all does work smoothly, no problems at all!

• Problems with video previews: Picture freezes during purification (CS6)

  I just installed CS6 on my computer after working with CS5.5 and I met a strange problem with my EOS5D Mk 2 and also Ixus 100IS images in Bridge CS6 (in fact, this happens with all videos).

  In CS5.5, I could get a glimpse of my mov files and rub through them without many problems (apart from occasional, but good crash... )

  In CS6 now the preview of the video starts and everything seems fine, until I have rub to a point later in the video. At this point, the video freezes but the sound continues. The only way to make the video running again is to click pause and then click play again. You can imagine that rub through videos is not fun...

  Someone at - it already had a problem like this with CS6?

  Since CS5.5 is always installed, I checked and found that in CS5.5 bridge everything still works fine: no video freezes it - only in CS6

  I've already updated the latest graphics card driver and all updates cs6. Does anyone have an idea what I could do?

  some stats on my computer:

  Win7 64 bit

  NVIDIA geforce GTX 590, pilot 301.42

  no other video software installed

  Aside from that, I also realized that the video quality in the preview area is not particularly brilliant (in CS5.5 or CS6). Because the video is proportional to the size of the preview window, I sometimes get artifacts/moirees scale. Is there a way to smooth video playback, as you would in a regular video player?

  Yes, this is a known bug.  I found it in beta, Adobe has confirmed, and they should have a fix on the next dot (hopefully) release.

• Problems with video playback in PE4

  I did the project using MPEG Streamclip to create video clips in AVI format and then using these clips in projects of PE4.  I add some titles and burn a DVD and I started.  I tried to do one of those bills yesterday, and now it does not work.  I was able to use MPEG Streamclip to create my clips.  Then I opened a project in PE4 and import 27 clips (total time 6 minutes).  I created my titles and went to read the Bill and it will not playback.  Then, PE4 crashes and takes me in the program ("... because Adobe close...)

  I can't return to the project I've tried several times.

  To my knowledge on my computer, nothing changed a few months when I did my last project of this type.  I have 408 GB of free space on my hard drive and 2 GB of RAM, so I think that Wouln't's question.

  I've updated my software Quicktime yesterday, and that made no difference.

  Any suggestions?

  Susan,

  There is a limit on the amount of physical RAM PrE can use. There is also a limit on the amount of physical RAM a 32 bit OS can see and use, and also how he can use. Once you reach these limits (they may also differ for the program), will more zero for performance, it is not accessible and might even interfere with the ability of the OS to see what he can see.

  I recommend that you install only what their operating system can work with. With a 32-bit operating system, it will be ~ 3 + GB of RAM. Most the MoBo allow 4 GB of RAM installed, so there is a bit of overage. This will be probably no problems, either. I have 4 GB on all my machines, if I still ~ 3 GB limit. A machine has the/3 GB switch, so it out a little more than 4 GB of RAM physical, though not really that much. This switch can cause problems with some systems and with some programs, so I do not have a blanket recommendation to use it. We should do, after exhaustive tests with all programs on this machine, followed by the performance of each. They should also put the things up, so that they can return easily, safely and quickly, if something does not work.

  A NLE (of Non-linear editing) program will focus on its system. It will be with the processor, the physical RAM and also subsidiary e/s system, which is the HARD drive. Each of them is an important part of the performance equation. In most cases is the order of importance: IO, CPU, and RAM. With AVCHD and a few other highly compressed formats/CODECS, the role of the CPU and i/o are reversed. In my observations, RAM still runs third in this equation, but it is always important.

  A NLE computer is a complex beast, with things infrequently, which gives great advantages (such as this article on the setting to the top of his computer), or when the changes major performance perks. Addressing all aspects, IO, CPU and RAM are the best way to approach it. It would be with AVCHD, CPU, i/o and RAM, in that order. All are important and to varying degrees, each will get the observable performance improvements.

  Getting back to your question about RAM, within the limits of your BONES, your programs and your motherboard, the performance increases will be there, but probably not very dramatic. They are there, but a mere observer might not be aware of them. Passing a drive HARD internal three and distribute properly to show them more quickly and be more noticeable. Go with a faster processor will do the same, if you can't see this helping hand to certain operations, such as rendering. With the media and sustainable development projects, improvement of I/O will get the biggest "bang for the buck."

  Hope this helps.

  Good luck

  Hunt

• problems with, phone, 6, Bluetooth kit, Nissan, after update, for, Rios, 1.0.2

  After the update to ios 10.0.2 - trying to use bluetooth to call my vehicle, it says: "this article is not in your phone book." How can I solve this problem?

  Greetings, joybelino1!

  Thank you for joining the communities Support from Apple! I can't wait to see that you are having problems with your Bluetooth in your car! The good news is that Apple has a great article that will help you with measures to try to resolve the problem. Read this article to gethelp to connect your iPhone, iPad, or iPod touch with your car radio. Even though he talks about problems with the connection, it also has the steps for other questions you may have once connected.
  
  

  If you use Bluetooth

  1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
  2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
  3. Restart your iOS device.
  4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
  5. Update your iOS device.
  6. Install the updates to the firmware of your car radio.
  7. If you still not connect, contact Apple technical support.

  Have a great day!

• Portege R700 - problems with video playback with resolution more 360 p

  I have this problem of video playback on the first day. While for example on YouTube, video resolution than 360 freeze while the sound is ok.

  I contacted Toshiba whereby I had a linke for the bios and latest drivers. After the upgrade question persists. Sometimes I get a green screen by watching the video flash as well. I guess it's a hardware graphics card problem. Any ideas? Thank you! (Portege R700 19 L, win7 pro 64)

  Do you have this problem in full-screen-only mode or in full and normal mode?

• I'm having a problem with the tabs is not responding after deleting localstore.rdf

  After the 4.0 update b7, I had a problem with my toolbar to reset and (a little), I corrected by deleting localstore.rdf. Now, however, my tabs do not respond when you click them, and Firefox is essentially locked on the first tab ideas?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  Create a new profile as a test to see if your profile is the source of the problems.
  See basic troubleshooting: a new profile

• Problem with video calling

  Dear community of Skype,
  
  These days, I have a weird problem with my Skype. I want to use the video calling option but my video is all messed up. So you can see what is my problem, I have included a screenshot. In the screenshot its my webcam that mess, but when I call a friend its their video that looks like this. I have no idea how to solve this probem and hope you can help. I reinstalled Skype already and installed the latest version but the problem remains. I also tested my webcam with different chat like Facebook video chat programs, but there is no problem.

  I hope that my problem will be solved because I really like using Skype!
  
  PS I apologize for some grammar mistakes. English is not my native language

  

  What is the name/model of your version of map and graphics driver?

  If your graphics card is nVidia, then see this:

  http://community.Skype.com/T5/video-on-Windows/video-reception-not-right/m-p/1447456#M11141

  http://community.Skype.com/T5/Windows-desktop-client/webcam-problem/m-p/1515620/highlight/true#M1289...

• Problem with video calling on Android...

  Everything works fine but the video call is very dark on my android 4.1.2. Either way, my front cam is 1.3 mega pixels, but the same problem with my camera back which is 8.0 Mega Pixels... but when I open my camera its light show app. In this way I hate this... Please solve the problem of video calling...

  qa60
  Check your internet connection or check your microphone or try again with handfree...

• Problems with two of my OPOS hardware after upgrade from XP to 7

  I have two HP rp5000 point of sale systems and I'm having a difficult time linking two of my OPOS hardware components.  My receipt printer, A794, even after installing the new drivers still is not recognized by the computer.  The other thing that doesn't connect also the HP Pole display, I think that it's an LD220.  I recently updated the OS from XP to 7 and that's when I had the problem with my computer, try to recognize them.  The pole display is USB and the USB printer to series.  Is there any firmware for the latter to try to make them work again?  I have download the firmware for the Pole display, but that didn't work either.  I don't think I saw one for the printer.   Any help would be useful.  Thank you.

  Npgwi2000, welcome to the forum.

  I'm sorry you have to do another post, but this is the Forum for the POS systems.  Experts it will be able to help with your problems.