HP Deskjet F2200: Brown printed in purple!

Similar Questions

• How can I get my HP Deskjet f2200 printer work for Windows 7.

  I recently had to buy a new PC, but my HP Deskjet f2200 printer does not work for Windows 7. He said that it is only compatible with Windows 2000, XP and Vista. I think I need to download a driver but which. Also, how do these things? Can someone help me please? Thank you.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Re: Printer suddenly printing in purple or pink, not black and white or color

  I have the same problem. I use a HP Deskjet 1000 (J110 series) number and product CH340A using Windows 7 on a HP Pavilion dv6 laptop.

  When you use The HP Wizard to view the ink levels, it shows the color cartridge with about 20% left and black, 40%. I've done a 'clean cartridge' and then I printed a 'Diagnostic information' sheet. This fact sheet includes, among other things, a test print colors black, yellow, Cyan and Magenta, all who seem to be very good for me. I got a warning message now then that says I'm low on ink and should consider replacing the cartridge if see the shortcomings of the color.

  So, if I'm apparently low ink:

  • Why the diagnosis show 20% and 40% still available?
  • Installed cartridges are original and XL versions and I don't have too many draws, so it shouldn't be there is still a lot of prints to go?
  • When I print the test on plain paper pages, colors are fine, but when you print on blacks of Advanced Photo paper HP out purplish. (I printed herein before photo with no problems)
  • If I need to replace the cartridges, what with 20% left or one black color with 40% left (to be noted that I print in purple instead of black)

  I could assume that replacement cartridges would solve the problem, but I think I would be throwing money in the trash that further much ink in the cartridges and ink. Other solutions or suggestions?

  Thanks in advance.

  The black cartridge is not used when printing on photo paper as the black pigmented ink is not compatible with photo paper.  If black is printing purple on photo paper, it would be an indication that the yolk runs out.

  I suggest you replace the color cartridge.  The ink level gauge is an estimate, and if you got the first low ink warning on it would be an indication that the cartridge may be empty.

• Inkjet HP DeskJet 5650 Color printer

  IS ink of ABILITY LEVELS (ie of HE YEAR UPDATE FOR UTILITY), OWN HEADS, ECT for HP 5650 PRINTER

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP Deskjet 5650 color printer inkjet - troubleshooting and Support
  http://h10025.www1.HP.com/ewfrf/wc/product?product=304445&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP Deskjet 5650 - drivers and software color inkjet printer
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=304445&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Example: Deskjet 3050 - J610: printer removes items in the print queue

  Please see problem posted on June 9, 2016 and thread support. Sorry, I don't know how to go on this subject but the problem that I've marked as being solved is no longer is. It it is possible to mark as resolved and to reopen the thread please let me know how and I would be glade to do. Essentially sent items to the queue printing are deleted until they can print. They show in the print queue and then are marked "delete." I ran Print ahd doctor Scan of my desktop PC, and he says that everything is OK with the printer. I can see what the ink levels in the printer, and it printed on the printer succcessfully diagnostic information when asked to do so. I can see all of the information on the model of the printer, the serial number etc. so it seems that the PC can see the printer. But it will not print emails or Word documents - while he has done it before. Problem seems to have started when I tried to scan a document in and it would not. Printer is connected wireless and has an IP address, it doesn't seem to be the firewall attached - I disabled the Anti Virus software and it will not print. It runs the Windows firewall good that cause issues? I disabled that too, but it did not help. I followed the intstructions given by Gemini02 a HP Support Agent and it seemed to solve the problem but it only did it once and then continued to remove items from the print queue. I also tried to turn off the printer and then the PC, left for a while and then restarted them and that seemed to work. He already showed the printer as offline and printing and scanning doctor fixed that but when I ran it but still it only printed once and then returned to the deletion of items in the print queue. Grateful for any advice anyone can offer please.

  Hi @Moonfire24,

  Welcome to the HP Forums!

  I saw your posts on how your HP Deskjet 3050 - J610 printer keeps deleting items in the queue in Windows Vista. And I'm happy to help you!

  Please try the steps in this guide, Print Jobs stuck in the queue (Windows), let me know what happens! (Even if the title of the guide may not correspond to your question, I think that the solutions will help.)

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  Hope this guide helps!

• Why my printer HP Deskjet 3350 A prints the message? Nothing to do with the scanning

  My HP Deskjet 3055 A printed satisfactorily for months. Recently transferred to a wi - fi connection and he began to Miss entire lines of text messages, it's printing.  Why would he do that?

  Hi Rosewright135,

  Thank you for being a member of the HP support community.  I understand that you have experienced problems with print quality because you changed printer Deskjet - 3055 has a Wi - Fi connection.

  I've included two different documents for you.  First a diagnosis of print quality issues is the document to follow when you have a print quality problem.  The information that you gave, I suspect that you have a print quality problem.

  I suspect that the transition to a wireless connection is probably a coincidence, but just in case I get the troubleshooting document printer does not maintain the wireless connection . Please follow the steps if the print quality paper does not solve the problem.

• Impossible to print as it says 0 Documents pending for printing with Deskjet 970 Cxi printer

  Original title: my Deskjet 970 Cxi printer

  Guys need help,
  I downloaded the driver for the printer and everything is installed. He is also said to be ready to use, but when I give the Print Option, it always shows 0 Documents waiting to print. Please tell me what to do as my exam is tomorrow...

  Hello

  It seems that you are facing problems with printing.

  -What operating system is installed on your computer?

  -Did you do changes on the computer before this problem?

  Method 1: I suggest you follow the steps in the link to run the troubleshooter and check if that helps.

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2: I also suggest you to follow the steps from the link and check if the problem persists.

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Method 3: If the problem persists, I suggest to follow the steps from the link to HP support and check.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02205477&tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=61818&task=solveCategory

  For reference:

  http://h10025.www1.HP.com/ewfrf/WC/documentSubCategory?tmp_task=solveCategory&CC=US&DLC=en&LC=en&Product=61818&Task=

  I hope it helps. If you have any questions about printing in the future please let us know. We will be happy to help you.

• More HP deskjet conectada's prints

  My team are Sony, tengo conectada more HP deskjet F380 is print. He puesto delivery problems. Sigue sin print.

  Hi Hola,

  We speak only English here and this forum is for Microsoft Security Essentials, not printer problems.
   
    
  If the problem is your printer, you can do better starting with the forum in Spanish: http://answers.microsoft.com/es-es/windows/forum/hardware?page=1&tab=all&tm=1300700638376.  Be sure to enter your version of Windows when asked at the top to reach the appropriate forum for your computer.  This forum has specialists where printer questions are better suited.
   
    
  Good luck and best wishes.

  ****************************************************

  Hola Hola,
  Hablamos solo an Inglês aqui y este foro're para Microsoft Security Essentials, no the more problems.
  If the problem are the more, you can hacerlo mejor Satélites con el siguiente foro en Español: http://answers.microsoft.com/es-es/windows/forum/hardware?page=1&tab=all&tm=1300700638376. Specifying Asegúrese cuando pidio Windows version in the part superior para para el foro right knew equipo. Este foro cuenta con especializados in cuestiones impresion son mas apropiados problemas.
  Buena suerte y mejores deseos.

• Does anyone know how to use the HP Deskjet F4580 wireless printer

  Does anyone know how to use the HP Deskjet F4580 wireless printer

  Do you have a specific question or just general knowledge?

  The manual is available online here.

• How can I stop my deskjet 2542 to print a page of 'test' whenever it is turned on?

  How can I stop my deskjet 2542 to print a page of 'test' whenever it is turned on? It is a waste of ink and paper!

  Hello @Jenn_95 ,

  Welcome to the HP forum.

  When you analyze the alignment page it say success or failure?

  It's the HP hardware installation guide

  Step 6: align cartridges

• HP Deskjet 970Cse only prints red after the new color cartridge installed.

  HP Deskjet 970Cse only prints red after the new color cartridge installed. I use black HP 45 and HP 78 color. Both are new. I know the printer is an older model, but it works well a month ago.  Any help would be appreciated.

  Thank you for your help.  It was a faulty cartridge.  I pressed a white cloth on the ink source and only yellow and blue were visible, without red (magenta).  I've returned the fabric and cartridge in the store (with my receipt) and managed to get another canister... it worked!  Both cartridges have dates of expiry of 2016.  Glad I didn't have to spend time troubleshooting my printer.

• HP Deskjet 1510 - Wont print in XP

  Hello

  I'm trying to set up a printer on an XP machine 1510. I tried again and again to get it going, but nothing works.

  In the current attempt, I installed base from the HP Web site drivers, the drivers are installed correctly and XP can see the printer, this is the default and I checked all the ports and parameters of the driver etc..

  However with everything apparently works, if you print a job goes into the print queue, is sitting there for a few seconds, then disappears, nothing prints not, nothing happens, the printer itself doesn't even make a noise.

  I tried the printer on my Win7 machine, works perfectly. I tested the USB ports and cable, no problem there.

  I have worked through many documents of troubleshooting on the 1510, including the spool of printer etc..

  I reinstalled the drivers and the software several times, the same result each time, see the printer XP is by default but when printing nothing happens.

  I'm getting closer to return the printer.

  Thank you

  

  

  

  

  Hello stildawn,

  Please try the below mentioned steps...

  1. click on the Start button on the computer.
  2. then click on Control Panel.
  3. then printers and faxes
  4. in the top left, click on add a printer
  5. click Add a local printer
  6. and while "Use an existing port" is selected, select "Virtual USB port... "and then click Next.
  "7. in the manufacturer list, select HP, then under the Deskjet 990 c printer list", then click Next and complete the wizard

  Now try printing. It should work.

• HP Deskjet 2132: Deskjet 2132 guard print page to test every time I want to print

  I just got this printer

  Whenever I go to print something on my printer, its tour and I don't know why, so when I have activate it and go to print an article, it shall decide on its own to print a Test Page first, all under its weight is to lose paper, it says its by aligning the heads, it should not have to align heads whenever I want to use

  How he stop doing that every time? , its boring and I cannot find any way to stop it in the settings menu

  Any help would be appreciated... Thank you... Jim

  Hi @JimDirt,

  Welcome to the Forums of HP Support!

  I see that your new printer HP DeskJet 2130 guard print a "test page" each time you print.  I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand how frustrating, it would be for you. It seems that alignment has not completed when you installed the printer at the start. The alignment sheet must be scanned or the process repeats. This is normal and it will continue to realign itself ended successfully.

  This guide illustrates the alignment process:

  • HP DeskJet printers 2130 - setting up printers
  Load paper into the paper feeder (make sure that you load into the fresh, unused paper tray).

  Load plain, US letter or A4 paper in tray after installing ink cartridges.

• DeskJet 3050 a: Deskjet 3050 a prints blur sometimes, new drivers, alignments, no cleaning, no joy.

  If I print a test page for the printer it comes out perfect.

  If I print a test page for Windows7 it comes out perfect.

  If I right click and highlight text when it is on the internet and press print it comes out blurry.

  Print an e-mail comes out blurry, even as wordpad.

  Basically, but no test pages come out blurry, unless I do a google search and find a random test page not associated with Win7 or HP which will be blurred.

  I tried new drivers, ink cartridges are fairly new, but they were good job and forwards the problem.

  I did several cleanings, alignments, not troubleshooting, no joy.

  He has been connected to the same USB port, worked many years.

  No updates of windows 7 or changes.

  No matter whether this printer is default, I also have a Canon iP2600 and it works perfectly, it was also in the years of system, once again no change, I can't see that would not cause this problem.  There is probably a change, but it is over my head as to what.

  Thank you

  Hi @bobscloud,

  Welcome to the Forums of HP Support!

  I see you are having problems printing with HP Deskjet 3050 a printer. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand how frustrating, it would be for you. You mentioned that you uninstall and reinstall the HP software. Looks like the drivers are corrupt, it is necessary to clean your system and try to reinstall again.

  Is the Canon iP2600 that printer as plugged in USB?

  You say that ' no updates Windows 7 or changes ", you have automatic updates is turned off? Please make sure that your Windows updates are up-to-date.

  When you install a USB printer, it is recommended that you disconnect the other USB printers during installation. In this way, the computer does not confuse the two and installs the correct driver.

  You unplug the Canon before reinstalling the HP Deskjet printer?

  I suggest to try the following steps in the following order for best results.

  • Utility of Microsoft Ms difficulty, diagnose and automatically fix the problems of the printer and printing.
  • How to troubleshoot Windows Installer errors.
  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  If the problem persists, I will try this solution.

  This problem occurs if there is printer drivers are corrupt.
  I suggest that you remove all installed printers and reinstall Windows 7 printer drivers if available.
    
  Remove a printer
  1. click on the "Start" button, type PRINTERS in the start search box and press ENTER.
  2 find the printers installed icons, then delete them.
  3. right click on the blank part of the window and choose "Run as Administrator"-> "Server Properties".
  4. on the tab drivers, select them printers list and click Remove. Please, select Remove driver and driver package.
  5. open the start menu, enter APPWIZ. CPL in the search box and press ENTER to launch the "programs and features".
  6. try to remove all related printer software.
   
  If the problem is not resolved, I suggest that you clear the money printing system.
  Step 1
  ======
  Start Windows Explorer, and then rename all the files and folders in the following two folders:
   
  c:\windows\system32\spool\drivers\w32X86
   
  To rename a file, we can click with the right button on the file and select Rename.
   
  Step 2
  ======
  1. Click Start, type REGEDIT in the start search bar and then press ENTER.
  2. navigate to and then click the following registry key:
   
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x 86
   
  View the list of subkeys. There should be only the following subkeys:
   
  Drivers
  Print processors
   
  If there are any keys other than those listed above, follow these steps:
   
  a. on the file menu, click Export.
  (b) in the file name box, type a descriptive name for this key--for example, type WindowsNTx86regkey - and then click Save to save it to your local office.
   
  We can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x 86 registry key to restore the key if you experience problems after you complete this procedure.
   
  c. delete all keys other than drivers and print processors.
   
  Step 3
  ======
  Find and click the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key. View the list of subkeys. There should be only the following subkeys:
   
  BJ language monitor
  The local port
  Microsoft Document Imaging writer monitor
  Microsoft Shared Fax Monitor
  Standard TCP/IP port
  USB Monitor
  WSD port
   
  If there are any keys other than those listed above, follow these steps to remove them:
   
  a. on the file menu, click Export.
  (b) in the file name box, type a descriptive name for this key--for example, type Monitorsregkey - and then click Save to save it to your local office.
   
  We can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key to restore the key if you experience problems after you complete this procedure.
   
  c. delete all keys other than the above 5.
   
  Step 4. Disconnect the printer from the computer and restart the computer.
   
  Step 5. Reconnect the cable from the printer to the computer, install the printer according to the manufacturer's installation instructions and then check if the problem persists.
   
  You can also use these two articles for this problem:
  http://support.Microsoft.com/kb/2000007
  http://support.Microsoft.com/kb/933454

  If all else fails, I create a new administrator account and try again, difficulty of a user profile is corrupted.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP Deskjet 2540: Wireless printing problems with HP Deskjet 2540

  Hi all

  I have a problem with a printer HP Deskjet 2540 - it prints if I connected a USB cable; However, he refuses to print if I try to print wireless.

  I had initially solved this problem when I went into system preferences > printers and Scanners and noticed two 2540 Deskjet series icons in a window titled 'Printers '. I ended up removing one of these icons and set it as a default, which temporarily seems to solve my problem. Now, I see two icons back in the "Printers" menu and my printer refuses to print over my wireless connection.

  My printer is connected to my internet connection so I don't think there is a problem here - I also recently installed the software for this printer to make sure it wasn't some kind of driver issue; However, it doesn't give me the permanent solution, that I'm looking.

  Any advice? My operating system is OS X Version 10.9.5

  Hey @love2dance,

  Please come back to me and let me know what you have tried.  I found an article by HP which has a more in-depth approach to troubleshooting your network configuration.  Click on the title of the article and start of Solution 2 and work your way down until finish you setting up your printer successfully:

  HP Deskjet 2540 and Deskjet Ink Advantage 2545 Printer Series - "Can't find printer" Error Message appears on the computer for a wireless network Installation

  Note that the steps are for Mac OS X 10.8 but you will find that again, as they apply to your configuration of Mavericks.

  If this set of troubleshooting options is far from establishing the connectivity Mac and printer, please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking on the 'Thumbs Up' icon below.

  Better luck with this and have a great weekend!