Problems with Windows 7 Pro on an SSD with 64-bit machine.

Similar Questions

• Update Windows problem with the Bits Service and error 0 x 80070057

  The service status: problem with the Bits Service

  Error 0 x 80070057

  Original title: Windows Update problems

  Hi Dexter,

  Can I know the KB # the update fails?

  What is the question pertaining to a specific or all update updates?

  What antivirus software you use on your computer?

  To resolve this problem, see the following article:

  Difficulty errors Windows Update corruption as 0 x 80070002 and 0 x 80070057

  Hope the helps of information. Get back to us with more information to help.

• Windows 7 PRO OA CIS and GE 64-bit

  My windows was able to start. I have Windows 7 PRO OA CIS and GE 64-bit. Could you please direct me to a safe download?  Thank you very much for your help.

  Windows 7 came preinstalled on your computer? If Yes, what is the name and the brand?

  New computers that come pre-installed with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

  ------------------------------------

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For LG, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  For Samsung, press F4 to the power upward...

  For Fujitsu, press the F8 key directly after the power

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• where can I report a problem with a virtual machine died, which I can't save now?

  It looks like a lot of places, but it is not clear where I should take this problem to.

  where can I report a problem with a virtual machine died, which I can't save now?

  He is buried in the VMware Community Infrastructure - here is the link to this forum - http://communities.vmware.com/community/vmtn/server/vi/esx3.5

• Problem activating Windows XP Pro on a Dell Dimension 4600, which originally had XP Home

  I have some difficulty to activate MY PERSONALLY PURCHASED VERSION of Windows XP Pro on a Dell Dimension 4600 workstation that initially provided with XP Home.  I have TWO Codes of 25 character key true = 1 The printed on the sticker on the computer AND the one supplied with the disk I bought for my laptop that was stolen last week.  I entered two key during the windows process codes activate and they the system tells me invalid or incorrect product key code.  I WAS talking with a Microsoft Tech Rep on the phone trying to solve this problem and has been disconnected when put on "Hold" and now cannot get through to a real person again.  CAN SOMEONE ' ONE/SOMEONE' HELP ME PLEASE?

  Hello

  Both your XP, the laptop and the Dell operating systems will have been oem licenses. OEM licenses are tied to the computer that they were originally installed on. In regards to the Pro license you can see in your report where is says Windows license Type: OEM System Builder.

  The only XP version that can be legally charged to your Dimension is one that has been provided with it by Dell, i.e. the XP Home license.

  activation of character for home 25 codes do not work with the Pro, the reverse is also true.

  Tricky

• ISO image installation problems under Windows 8 Pro

  Whenever I try to mount the ISO with the integrated installation of Windows 8 Pro it returns "could not mount file" 'Sorry there was a problem, the cut file' or 'the disk image file is corrupted.

  In some cases, the file gets however mounted, but to find out, I have to watch computer containing all the readers.

  In each case, whenever I drop an ISO that contains audio from SACD or other media, danslechamp of J River Media Center 'Play now', it shows every single track file picture disc and plays well. So he does, even when burned on a DVD + R, then, obviously, the ISOs are healthy and should the problem with Windows...

  I'd be happy to hear from you on this subject.

  The file must be renamed to .exe on the Microsoft site.  This is an executable, not an ISO standard

  (Visio 2013 64 bit in English)

  OK guys, I FOUND THE SOLUTION by chance.

  Here's how to solve the problem (at least it worked immediately when I did it, then try it!)

  Right click on the image in question file (.) IMG. ISO, etc...) and choose a default program to open with. WIndows MUST ABSOLUTELY BE the DEFAULT program to open the image files. There is a bug not declared on the Explorer of Windows 8 is not not the default value, which is not to open an image file valid, not corrupted.  YOU MUST set the default Windows Explorer to mount as a virtual DVD drive image files in WIndows 8.

  That's all and I hope it works for you. Thank you! and if it works, please mark this as useful to show your appreciation, because there is no button of congratulations or thanks. : D

  Here what I was doing, eject the SD card (you don't have to get out of the computer).  Try to mount again.  I did it and it worked perfectly.

• Hosted network problem in Windows 8 Pro

  my wireless network adapter supports the hostednetowork when I type in cmd netsh wlan start hostednetowrk the following text is displayed. the hosted network could not be started. the group or resource is not in the correct state to perform the requested operation. I have run windows 8 pro. Help, please.

  Name of the interface: Wi - Fi

  Pilot: TP-LINK Wireless N adapter

  Seller: TP-LINK

  Supplier: TP-LINK

  Date: 11/26/2009

  Version: 3.5.0.12

  INF file: C:\Windows\INF\oem26.inf

  Files: total 1

  C:\Windows\system32\DRIVERS\arusb_win7x.sys

  Type: Wi - Fi Native Driver

  Radio types supported: 802.11 g

  FIPS 140-2 mode supported: Yes

  802.11W protection of management framework supported: No.

  Hosted network supported: Yes

  Authentication and cipher supported in infrastructure mode:

  Open any

  Open WEP 40 bit

  Open WEP 104 bits

  WEP open

  WPA-Enterprise TKIP

  WPA-Personal TKIP

  WPA2-Enterprise TKIP

  TKIP-WPA2-Personal

  CCMP WPA-Enterprise

  CCMP WPA-Personal

  WPA2-Enterprise CCMP

  WPA2-Personal CCMP

  Authentication and cipher supported in ad - hoc mode:

  Open any

  Open WEP 40 bit

  Open WEP 104 bits

  WEP open

  Hi all

  I had this problem and I solved it.

  The solution is:

  1. go into Device Manager.

  2. click on view and then on "see the hidden devices.

  3. go down the list of devices and expand the "network devices".

  4. find an adapter with the name "Microsoft Hosted virtual network card" and then right-click on it.

  5. Select activate

  6. This will allow the AdHoc created the connection, it must appear in the network connections in the network and sharing Center, if the connection to the ad hoc network does not appear then open the elevated command prompt and apply this command "netsh wlan stop hostednetwork" without the quotes.

  7. After this, the connection should appear.

  HTH

  Anas Jalal

  Kind regards

• 8.1 Windows Pro update the problem (from Windows 8 Pro) on Envy 23 TouchSmart all-in-One...

  Hello

  I have a HP Envy 23 Touchsmart all-in-one that I bought a year ago (12/2012). It comes preinstalled with Windows 8.

  System information:

  (a) Intel (r) Core i7 - 3770 S CPU @ 3.10 GHz

  (b) 8192 MB of RAM

  A few weeks after that I had bought the system, I've upgraded to Windows 8 Pro with Media Center that I bought through Microsoft upgrade program.

  Last week (19/10/2013), I saw the option upgrade to Windows 8. 1 in the store and decided to upgrade.

  After a few minutes, I got a prompt asking me to restart the computer, and I did.

  However, I noticed that the screen has turned white, but it restarts not really - I have seen that the hard drive light was still flashing and I waited for about 15 minutes. I know it does not restart because if that were the case I would have seen the HP logo on the screen of the BIOS. A little later, the system entered into mode 'sleep' (at least the light blinked slowly as if it was the sleep). As it was late at night, I decided to leave the system alone and decided to check on it the next morning. The next morning, he was still in mode 'sleep' (as I feared) - when I tried to wake up from her sleep by moving the mouse/hit the return key, he did the exact sounds as if he were to wake up from its sleep (as it always does), but the screen is still blank. The light power button lit up constantly indicating he's awake now.

  At this point, I decided to turn off the system by holding the button for a few seconds. To restart, I saw the HP logo on the BIOS boot screen and the screen went white and nothing came.

  So I decided do a system recovery using my Windows 8 recovery CD and turn off the system with the CD in its niche. This time, the system came and began immediately to restore my OS to a previous version.

  After connecting to the system recovered, I received the following message:

  "Could not update for Windows 8.1.

  Sorry, we could not complete the update Windows 8.1. We have restored the previous version of Windows on this computer.

  0xC1900101 - 0 x 40019.

  I tried to reinstall Windows 8.1 a couple of times after that. Once to disable all non-Microsoft services and disabling all startup programs. Always the same result.

  I have no antivirus software on my other system protection of Microsoft default system software.

  Any help, greatly appreciated.

  Thank you.

  I have disabled active secure boot existing starter and the update worked.  Now we get the error of watermark "secure boot not configured correctly.  But I have re-enabled secure boot and the error disappeared.

• Audio problem in Windows 8 Pro 64 - bit...?

  ---

  Sometimes (about 50% of the time), sounds don't work at all, either when using headphones or built-in speakers...

  ---

  When this problem started:

  This problem started on July 10 after a few automatic updates have been installed. According to the history of my update, this is:

  (1) update for Windows 8 for x 64 systems (KB2960837)
  (2) removal tool malware from Windows to Windows 8, 8.1 and Windows Server 2012, 2012 x 64 edition R2 - July 2014 (KB890830)

  ---

  How to solve this problem:

  Right click on "computer".

  Go to 'manage '.

  Go to "Services".

  Right click on "Windows Audio" and "restart".

  Then I restart the laptop and the sound is working again...

  ---

  After the above, I did this:

  Went to "playback devices".

  Went to 'Properties' and then 'Advanced' tab

  Unchecked "allow applications to take exclusive control of this device."

  ---

  But still, half the time I start up my system, the problem is recurring and I have to redo the steps above to make it work again... When I go to "Playback devices" and right click on the speaker and select 'Test', I get the following warning message:

  "The device is used by another application.

  "Please close all units are audio playback on this device, and then try again.

  ---

  But according to the Task Manager, there is no other application running which I think could do this... I got a Virus/Malware and did a full system scan and analysis in time start but there is nothing... While I can solve this problem by following the steps above and by restarting Windows Audio, I want a permanent problem solution please... I don't want to have to keep rebooting my audio system to rework...

  ---

  Features of the laptop:

  i5 - 3210M

  6 GB DDR3 1600 MHz RAM

  Intel HD 4000 @ 650-1100 MHz

  Windows 8 Pro 64-bit

  Quick Heal antivirus Pro

  ---

  Update KB2962407 the origin of the problem. I fixed mine to uninstall this particular update. Details can be found here:

  http://www.eightforums.com/sound-audio/49684-no-sound-device-being-used-another-application-7.html

• Windows will ask drivers during the installation of Windows 7 Pro on samsung SSD 950

  I'm doing a clean install of windows 7 Pro on a new Samsung 950 m2 Pro drive. My motherboard sees the drive but the windows 7 install is not and wonder which I can't find a driver. It is a new construction. Asus motherboard. I'm installing from the DVD, and everything starts fine until the Setup program cannot find the 950 pro. The 950 pro is the only player at this moment, I installed. Is there any solution for this?

  Thanks for looking into this but I found a solution, all I had needed was the pilot for the 950 pro, once everything went as smooth as, say Kalua. Feel good that here the monster has increased.

• PROBLEM $netshare windows xp pro sp3 vmware account password

  Hello

  I have installed windows xp pro sp3 on a machine virtual workstation in win7 premieum. to the prevalence of xp pro she asks me the password of an account $netshare that I never created. the fact I can access from not a win xp please help me thanks

  Click in the virtual machine window and para Ctrl + Alt + Delete twice and pour it to appear a different login screen.  Try no password administrator or if you have created an account to a different name, you can try.

• Windows 2000 Pro system/disk physical conversion into virtual machine

  Fairly new to the world of the VM and was directed to VMWare for possibly a problem for us.

  We have a gentleman with an older system running Windows 2000 Pro (SP4) with a ton of software installed.  We put in place a new Win7 Pro system for him, but he won't Cross and reinstall everything (in addition to the time involved, some of the software is older and Win7 compatibility is probably a problem).

  We were originally at a switch KVM allows you to switch between systems, but then I found in the converter and thought this would be a great solution for him.  My thoughts are to use the converter to create a virtual machine from its old system/hard drive and install Player on its new Win7 system, it can fire up to his old Win2000 environment when he needs to work - and we can empty the old physical system.

  I have scanned through the documentation for converter and understood that I would need a version of Converter before 4.3 (like, 4.01 or earlier?).  Now, what should I install on it have to happen?

  Do I need to set permissions on its legacy system to expose the discs on the network?

  Can I get the old HD and connect it to the new system and convert this way?

  Do I need to install something on the source and the host system to do this?

  Once I can understand this point, we may need to conduct a number of other older systems, it keeps alive for the same reasons.

  I guess I should ask first - is that what this application is designed to do?  Or it fits into another software solution?

  Thank you very much for any information/guidance someone can provide - greatly appreciated.

  (PS.  Please don't just live/link me to the documentation.  As mentioned, I went through that, and I'm not real familiar with the setting/process, so that really helped a lot.  Thank you once again.)

  VHDs are used by VirtualBox and VirtualPC
  VMware uses the vmdk files

  You start converter on the Win2000 and tell him to "convert THIS machine.
  It then creates a vmx file plus a vmdk file.

  On the Win7 host you install VMplayer or workstation, and then simply double-click the vmx file... If everything works as expected

• E520 - problem with 64-bit Intel HD Graphics Driver

  Hi guys again.

  I would like to apply for assistance. I have problems with the driver Intel HD graphics 64-bit downloaded from http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8hd613ww.exe (for my Edge e520 1143-37 G). I have Windows 7 64 bit Czech.

  When I try to install this driver, he continues to say "this computer does not meet the minimum requirements for installing the driver". I already have these:

  1.) when I set "Integrated graphics" display in the BIOS settings, then I can install this driver, but I can't install ATI driver.

  2.) when I put "Switchable graphics" display of the BIOS, then I can install ATi driver, but I can't install the Intel HD driver by telling this thing on the minimum requirements.

  I have the latest drivers for chipset, SATA AHCI, etc. Any help would be appretiated. Thx a lot.

  Daniel

  Ahoj.
  Kdyz v notebooku grafiku prepinatelnou mas, ti tak staci AMD muxless drivers.

  Obsahuji AMD Intel ovladace tak jak Ty...

  Samotne Intel ovladace nelze zvlast instalovat/aktualizovat.

  Benik3

• Heroes of Might and Magic II: problems with 64 bit

  I'm having trouble installing my old set of 96, Heroes of Might and Magic II. When I try to install the game on my Windows 7 64 - bit processor, or run it at all, I get an error indicating that it is incompatible with a 64-bit version of windows. I have found no online help for such an old game. What options are available to me that would allow me to launch this game on my computer?

  My friend has Windows 7, but running at 32 bits, and is able to play the game.

  Hey Stas,

  I fear that the game will not work because it is not compatible with 64-bit operating systems. However, we have an option.

  You can run the game mode XP provided your version of the operating system supports installation of XP mode.

  Windows XP Mode comes as a separate download and works only with Windows 7 Professional, Ultimate and Enterprise.

  Windows XP Mode

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-XP-mode

  Install and use Windows XP Mode in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-and-use-Windows-XP-mode-in-Windows-7

  Using Windows XP Mode

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/using-Windows-XP-mode

  You can also try Microsoft Virtual PC

  Virtual PC 2007: Run multiple operating systems without "multiboot"
  

  http://Windows.Microsoft.com/en-us/Windows-Vista/Virtual-PC-2007-run-multiple-operating-systems-without-multibooting

  Try to install XP mode or Virtual PC and then try to read the gae in Virtual PC and XP mode. You can install the XP mode only if you have windows 7 Professional, Enterprise, or ultimate edition.

  Hope this information is useful, please let us know if you need further assistance.

  Concerning
  Rehman - Microsoft Support

• Problem with restarting the machine. Essbase 11.1.1 installation.

  Hi all
  I have a problem with my installation Essbase 11.1.1. In short, when I restart the machine I can not connect to EAS more. The only way I found out is just reconfigur EMP system after the restart, but it's just a work around.
  
  Thanks for the help

  Hi user,

  AsI read between the lines, it seems that you were previously able to access EAS so your facility is not the problem but you are access EAS is the problem. As you mentioned that you are unable to access after you restart the server, I think it might be a prolem with the services. Please try to stop all services in this order:

  Administration contract
  Essbase services 11.1.1.1_Hypservice_1
  Foundation
  OpenLDAP

  and then restart them from the bottom up. Let me know.

  J.