ProBook 470 G1: Windows 10 - INTERNAL_POWER_ERROR

Similar Questions

• ProBook 470 G2: HP Probook 470 G2 10 problem Windows

  Hello

  I bought a laptop Hp ProBook 470 G2 with windows 8.1.  I upgraded the Windows Windows 10. Everything is working great except for the fact that the Fn key does not work with F3, F4, F9 and F10. The only combination that works is with Fn + F6 and F7 for the sound. For HP Probook 470 G1 model there is a driver for the HP Hotkey support keyboard but is not compatible with the G2 model. I have the latest drivers for the video. Cheked all. If you can help me or give me a HP Hotkey Support driver that is compatible with this model, it will be nice.

  Thank you in advance.

  Try to install the sofpaq following Hotkey for Windows 8.1 in compatibility mode.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943843&swItemId=ob_142323_1&swEnvOid=4158#tab3

• HP Probook 470 G2: Recovery 8.1 of Windows on a new drive

  I have a HP Probook 470 G2. The original disk is fine, but I want to migrate to an SSD. I did a restore USB and replaced with a 120 GB SSD HD. It is much less than the size of the windows on the original disk partition so I don't see a problem with that.

  Having exchanged the disks and booted from the USB, I chose "reset windows" and everything seems to go well until 74% when I'm "there was a problem of resetting your PC", with an option to restart.

  I found a thread here where there are similar symptoms, but because I am using a new drive I don't think I can replace the drive in the middle of the recovery.

  I saw some videos on YouTube that show a HP Recovery Manager in Windows itself (which I don't have) or in the screens according to press F11, and I don't understand that either.

  I have to correct, then restart. Choice of troubleshooting, I get Refresh (does not work, because the disc is empty), refresh (arrives at 74% as I said) and advanced. Advanced led system, System Image recovery restore settings, Start Up repair, prompt command or UEFI firmware.

  As I have said that there is no HP recovery in Windows itself, I used a Windows procedure, but he said the HP Recovery disc in the middle of the construction so I assumed that he had built himself ok. It's driving me crazy now, should not it lasts migrate to a better record, but I have not found a conclusive answer via Google or HP pages where my post here.

  Any ideas? My position of strength, it's that I still have the HARD intact original disc so I did not burn bridges.

  OK, so you pouvez use a recovery USB disk to install on a smaller disk. It's just that something was wrong with my recovery USB drive. I have a friend (with the same laptop) to create a recovery on his drive and it worked.

• ProBook 470 G0 network controller drivers

  Hello. I have trouble with the drivers for the network for ProBook 470 controller.

  After the installation of new windows no driver does not match this device.

  Help, please.

  Hello:

  Here is the link for the driver you need.

  I gave you one of a consumer notebook because business PCs site is down and has been walking all weekend.

  They must have some problems there.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127448-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 6521374 & sw_lang =

• ProBook 470 company G1 64-bit drivers

  Hello

  I am currently undertaking a task of building of a HP ProBook 470 G1 on Ent of Windows 7 64 bit...

  I'm having problems with the drivers for it (as expected), I wonder if anyone can help with the driver either exact or compatible for:

  Hardware ID;

  \VID_0E8D&PID_763E&REV_0100&MI_00 USB - shows just as BT in device management

  PCI\VEN_8086 & DEV_8C3A & SUBSYS_1940103C & REV_04 - PCI Simple communications controller

  PCI\VEN_8086 & DEV_8C31 & SUBSYS_1940103C & REV_04 - USB controller (USB 3.0 I think)

  ACPI\HPQ6007 - unknown device

  Thanks in advance for any info/help people can offer

  Pete

  Hi, Pete:

  Here are links to the drivers you need:

  PCI\VEN_8086 & DEV_8C3A

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123657_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  PCI\VEN_8086 & DEV_8C31:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_128883_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  ACPI\HPQ6007:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_127112_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  \VID_0E8D&PID_763E USB:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_127978_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• HP ProBook 470 G3: upgrade memory and storage in the HP ProBook 470 G3 17.3 "

  Hello

  I would like to buy HP ProBook 470 G3 17.3 "after reading the review of this laptop in Notebookcheck.net site,

  The laptop has a large 17.3 display, I think in ZBook but is too expensive so I need Quadro GPU or CPU high range this ProBook G3 17.3 "is the best choice as I thought... by the way

  My question on the model with the product number: T6D90UT

  CPU: Intel® Core™ i7-6500U with Intel HD Graphics 520 (2.5 GHz, up to 3.1 GHz with Intel Turbo Boost Technology, 4 MB cache, 2 hearts)

  RAM: 8 GB of SDRAM DDR3-1600 (1 x 8 GB)

  Internal drive: 1 TB 5400 RPM SATA

  Display: 17.3 '' diagonal backlit flat antireflection FHD LED (1920 x 1080)

  GPU: AMD Radeon R7 M340 - 2048 MB, Core: 1021 MHz, memory: 1000 MHz, DDR3, 64 bit interface

  Website of notebookcheck and HP site says the laptop has DDR3-1600

  http://www.notebookcheck.NET/HP-ProBook-470-G3-core-I7-6500U-Radeon-R7-M340-notebook-review.155142.0...

  http://store.HP.com/us/en/PDP/laptops/HP-ProBook-470-G3-notebook-PC-%28energy-star%29-t6d90ut-ABA#SP...

  While the HP parts store said that the portable DDR3L?

  Memory module 8 GB 1600 MHz, DIMM DDR3L PC3L-12800 (SHARED)

  Reference number: 693374-001

  Visit this link please

  https://parts.HP.com/hpparts/Search_Results.aspx?mscssid=709EC0F980AD4FC3A887C0C5C3DB5C46&SearchIn=P...

  It's great so far but what make me confuse is the price of RAM, there are two parties with the same name, the two net price is $209.00 (it's too expensive there technical error or what)

  I can buy 16G. B (8 x 2) Kit from Newegg in the 57 to 100 such as price range below

  CORSAIR Vengeance Performance 16 GB (2 x 8G) 204-pin DDR3 SO-DIMM DDR3L 1600 (PC3L 12800) laptop computer memo...

  Priced at $ 69.99

  Case latency: 9

  Time: 9-9-9-24

  Voltage: 1.35v

  Multi-channel Kit: Dual Channel Kit

  Model #: CMSX16GX3M2B1600C9

  Item #: N82E16820233587

  But I say that if I could, but the same part in HP it will be better for the stability and the use of long date because the series HP's ProBook made with too many test and the part use inside, he is selected to make the laptop to run higher stability.

  If the price is right and it's expensive so can I but the corsair with latency case kit Timing: 9-9-9-24 and tension: 1.35v, is also the RAM inside the laptop DDR3L with voltage: 1.35v

  Another question if I want to use the SSD for the system slot m2 inside the laptop only used there not I think to buy

  SSD Samsung 950 PRO - Series 256 GB PCIe NVMe - M.2 SSD internal 2 inches MZ-V5P256BW

  and as a primary partition for the windows system and the 1 TB drive will be secondary disk for my files is that fine or the laptop works with some LAGS and slow.

  Here is the Service Manual:

  Manual

  It has doors on the bottom so is very easy to upgrade. It takes DDR3L-1600 low voltage (1.35) up to 2 x 8 modules for total 16 concerts. It is the specified memory:

  8 GB (PC3L-12800 1600 MHz, DDR3L) 670034-001

  It has a slot of the WSSD m2 using modules with this form factor:

  

  If you need assistance more let us know.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Probook 470 G1 - FN key does not!

  Hello!
  
  First of all, sorry for my bad English language.
  
  I just bought new computer HP Probook 470 G1, and I can't do the Fn F7/F8 or F9/F10 command which is useful for the brightness and volume of work.
  Does not work when I press FN + F3 computer go to the mode "sleep", but other functions. I tried to download HP Quick Launch Buttons (International) , HP Softpaq Manager Donload, try changing the options in the BIOS and still nothing...
  
  Someone has an idea how to make these buttons work? I'm going to lose my mind...
  
  Thank you everyone for help!
  
  EDIT: I use Windows 7 ultimate x 64, if that helps.

  Hello @MHorvat9 ,

  Thanks for posting on the HP Forums!

  I understand that you have a problem with your laptop. However, since it is a commercial laptop, you should post your question on the map cell of the HP Enterprise Forumsfor a better answer.

  Have a wonderful day!

  Mario

• HP Probook 470: How to remove the fingerprint reader

  How can I completely remove the software from the fingerprint of my Probook 470 scanner? It always requires 10 to 20 shots before he let me. It is a good idea in theory but boring in practice.

  I could exit the fingerprint enabled option and just ignore it - but unfortunately it is bloatware. Whenever I go to the connection, it keeps the box frozen for several seconds, and then it will allow me to start typing my password.

  I would go back to this nice simple Windows 7 connection that the HP software has hijacked unfortunaetly.

  Sucess. I have it solved, but it is quite difficult.

  First of all, I have tried to uninstall HP customer Security Manager but got the following error:

  error 1325.hewlett - packard is not a valid short file name.

  To work around this, I went into control panel / Device Manager and disabled the driver CD-ROM/DVD-ROM (no! I don't know why).

  Then, I tried once more to uninstall HP Client Manager Security. This time he says that I need to first uninstall the following:

  -HP Device Access Manager
  -HP File Sanitizer
  -Recovery of stolen computers HP
  -HP Drive Encryption

  Then I uninstalled the four of them in turn, rebooted and then uninstalled the HP customer Security Manager - which this time did actually uninstall.

  The result has been successful. When I start my PC now, I can type my password instead of having to wait a few seconds while the HP bloatware gets himself sorted immediately.

  Oh, and I also re-enabled my CD-ROM/DVD-Rom driver.

  Weird.

• HP Probook 470: What is the BIOS administrator Passowrd

  I've restored my Probook 470 to the factory settings and ran Windows Update a couple of times bring things up-to-date.

  Then I used the built-in HP Support Assistant to check the HP updates. There are a few updates driver including an update of the BIOS. All have been installed except the BIOS update - asking me to enter the "BIOS Password Admiistrator".

  What shuold I go home? There is nothing that came with the computer who told me.

  OK, thanks for all your answers.

  A helpful guy to the HP Support has generated an SMC. BIN file for me (as well as clear instructions on how to apply it). Everything worked well and I now control the Admin BIOS password and have successfully installed the latest version of the BIOS.

  A nuisance - I had to install the BIOS manually because HP Support Assistant has a major bug. He pretends to install BIOS but, after Windows restarts, it displays the following window:

  "A restart is required to complete the installation of updates"

  Whenever I restart the machine, HP Support Assistant does is display the same pop-up window. An endless loop basically.

  I solved this by installing the latest version of the BIOS manually and uninstall HP Support Assistant completely from my machine.

• ProBook 470 G1: HP Probook 470 G1

  Hello

  I have a HP Probook 470 G1 series and I upgradted with version 8.1 of Windows. After that I did find some missing driver attached.

  advice please?

  

  Let us know if it works or not. If this isn't the case, we keep trying.

• ProBook 470 G0 webcam show

  Hello

  I have a ProBook G0 470 with Windows 8.1 and my problem now is that the system does not recognize my webcam. I do not see the material on the BIOS or in Windows Device Manager and when I try to install the drivers, it is said that this type of material found.

  Below the Setup log.

  29/06/2014 18:32:34.343 | 00000944 | Information | WinMain. Order Line:hpqRun.exe
  29/06/2014 18:32:34.348 | 00000944 | Information | FindMappingFile | Found C:\SWSetup\SP64824\MAP. INI file
  29/06/2014 18:32:34.356 | 00000944 | Information | FindSectionName | Find the [USB_ID] section in the INI file
  29/06/2014 18:32:34.359 | 00000944 | Information | FindKeyID | ARTICLE found: [USB_ID]
  29/06/2014 18:32:34.377 | 00000944 | Information | FindSectionAndKeyStrings | Cannot find key ID: error code = 1011
  29/06/2014 18:32:34.380 | 00000944 | Information | WinMain. Complete, return Code: 1011

  Any ideas?

  Hi nicolaidesnicos,

  I'm sorry, but to get your question more exposure, I suggest posting in the forums shopping, since your Probook is a commercial product. You can do it at Commercial/laptop - HP ProBook, EliteBook, Compaq, slate/Tablet PC, Armada, LTE

  Support of your product page can be useful in the meantime: HP ProBook 470 G0 Notebook PC

  I hope this helps.

• ProBook 470 G3: ProBook 470 G3 fan system after flashing the BIOS errors

  B has recently purchased a HP ProBook 470 G3 with i7 CPU. When I got the laptop I placed my own memory and M.2 SSD in and performed a clean installation of Windows 10 x 64. Everything was fine, I installed all the drivers and the laptop worked perfectly. However, when I flashed the new BIOS, V1.07 Rev A, I started to have problems.

  I use the laptop for academic purposes, I so open and close several times a day. After flashing the BIOS again, the laptop awake sometimes not, and trying to turn off it I had to remove the battery. Would not even holding down the power button for 20 seconds. While booting after removing the battery, I'd get a system error, 90 b error code fan.

  I tried re flashing version 1.07, but returned eventually to version 1.06. This version works very well. It was a real let up to me, given that this laptop costs €1400,- and should be a book reliable business.

  Is their another experiecing the same problems? If so, how do fix you it? And no one knows when they will be a stable version of BIOS V1.07?

  Use the PC Hardware diagnosis UEFI to restore the previous BIOS so that that you flashed cause questions.

  Press the power button and then immediately begin to press the F2 key to evoke the Diagnostics menu.

  Choose firmware management. In the menu next, choose and click on revert to the previous version.

  You can also create and use the 3-in-1 usb to accomplish the same.

  http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/PC-DIAGS.html?JumpID=va_r602_us/en/any/PPS/pl_ot_ob_ds_pd/HP_PC_Hardware_Diagnostics_cc/DT

• HP Probook 470 G1 wireless problem

  Hi, I just bought a HP Probook 470 G1. I installed Windows 7 Professional 64 bit and I cannot get my wireless to work card. The problem appears after an amount all or random that long, it can be 2 minutes or 1 hour 5 minutes. The problem arises when I use wireless networks simply can't access addresses and had to wait about 5 minutes for wifi adapter can connect to available networks, strange thing is I can see the networks but it is unable to communicate with them, even if they are the passwords or whithout a password I received a message windows cannot connect to the wifi network tried to different access points, routers and the same problem, tried to install other OS like windows 8 or 8.1 of windows and the problem persist. 2 of my friends also have this NB and have the same problem.

  I do not understand this problem only with Mediatek (Mediatek MT7630E is installed) adapter wi - fi or other but we all have the same problem and cannot locate the kernel of the problem because it appears randomly every time...

  Product mobile no.: E9Y68EA #ACB.

  Guys,

  Here is the link to the FTP site with the new driver, as you can see that there is now a dedicated Windows 8.1 driver.

  FTP://wln45070:CK * [email protected]

  Solved my problem! A disconnects every 15 minutes. They are now completely gone!

• HP probook 470 g1

  Hello

  I have a HP Probook 470 G1 and am having problem to connect to bluetooth devices.

  I win windows pro 8.1.

  When I look at the page of the software for my laptop on HP's site, they list a certain different drivers. How will I know that I have installed the right?

  Any help would be appreciated

  Hello:

  It would be the Bluetooth driver and software you need for the QCA9565 of Qualcomm Atheros 802.11b/g/n WiFi Adapter:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_125688_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• HP ProBook 470 G1: AMD Radeon HD M 8750 is disabled

  Hi, I have a HP ProBook 470 G1.  I work must in AutoCAD. Graphics card is off, but I don't know how.

  Who can help me?

  Plug is:

  Overview
  The software version of Radeon - 16.4.1
  Radeon software - Crimson
  Windows version - Windows 10 (64-bit)
  System memory - 16 GB
  Type of processor - Intel Core i5 - 4200 M CPU @ 2.50 GHz
  --------------------------------------------------------

  Software
  Radeon settings Version - 2016.0403.2360.41341
  Version of the driver package - 16.15.2211.1001 - a-301124E 160403
  Provider - Advanced Micro Devices, Inc.
  Version of the 2D - 8.1.1.1546 driver
  Direct3D® - 9.14.10.1183 version
  OpenGL® - 6.14.10.13431 version
  OpenCL™ - 2.0.6.0 version
  AMD coat Version - 9.1.10.109
  Version of the API of the AMD coat - 98309
  Version of the AMD - no Audio driver available
  --------------------------------------------------------

  Material
  The graphic card manufacturer - powered by AMD
  Graphic chipset - AMD Radeon HD 8600 / 8700M
  Device ID - 6600
  Vendor ID - 1002
  Subsystem ID - 1947
  Subsystem Vendor ID - 103C
  Revision ID - 00
  -Bus type PCI Express 3.0
  Current settings of Bus - PCI Express 3.0 x 8
  BIOS version - 015.029.000.006
  Part number of BIOS - BR45018.001
  Date of the BIOS - 2013-10-14 23:35
  Size of the memory - 2048 MB
  -Type of DDR3 memory
  Memory - 1000 MHz clock
  Base clock - 825 MHz
  Band total memory - 32 GB/s bandwidth

  I solve my problem with the Radeon 16.3.2 software Version

  and the version of the driver 15.201.1301.0.

  I did something very satisfied because Intel HD Graphics 4600 is still AutoCAD graphics performance