ProBook 6545b dual display

Similar Questions

• Dual display Windows XP

  My computer laptop dual display view Windows XP?

  Yes.

• SE Pavilion a4313w support dual display?

  My A4313W will support dual display? If this is not the case, what should I upgrade and what should I put to date?

  2.2 GHz AMD Sempron

  3 GB RAM

  Windows 7 64 bit

  Here are the full specifications for your HP Pavilion a4313w desktop. As we said already, your factory-installed power supply is only 250 watts and cannot support the requirements of most graphics cards at retail. If you want to install a discreet graphics card into the PCIe x 16 computer slot, you will need to upgrade your power supply the minimum required by the graphics card. For more information, see Guide of Big_Dave for the selection of a discrete video card .

  If you don't do any game and want more screen space for the trading day, spreadsheets, word documents, etc., please consider a video-to-USB adapter as the EVGA UV more + UV19 or EVGA UV more + UV39.

• ProBook 6545b Fan (maybe) a show

  I have a laptop of ProBook 6545 b with Windows 7 Professional on this topic. I got it from spring 2010.

  I don't know if it is a problem but, up to perhaps 3 or 4 months, the fan rarely ran high. Now and it seems that this may be for an update I received thanks to HP Support Assistant, it seems to work higher more often than before.

  I don't know if it's a problem because the air coming out of the exit of the fan is hot, so maybe he did the right thing, but I'm a little worried.

  He did the right thing or is there maybe something wrong?

  I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a commercial product. You can do this HERE.

  Laptop HP ProBook 6545b support

• ProBook 6545b: ProBook 6545b fan runs continuously on the average speed.

  The fan on my HP ProBook 6545b worked at all average speed for the past 6 or 7 hours I had it lit.

  I looked at performance monitor and the CPU is a little more than 50%, most of the time.

  I checked the process in the Task Manager tab and see nothing unusual.

  Any ideas what the cause, other than dust in the fan?

  Thank you.

  Jeff W.

  @Jeff17866

  Fan is always on the set in the BIOS?

  

  REO

• Dual display for Pavilion Elite HPE - 580 t with NVIDIA GeForce GT 420

  recently bought Pavilion 580t for my wife. Updated to NVIDIA GeForce GT 420 map graphics. But there are currently not able to determine if it supports dual display. When you check the Nvidia site, he says that all the stuff here. But this has only a DVI port. It also has an HDMI port. Do I need a spliter any for this?  Or can I use the HDMI port for a monitor (if the new monitors even come with this exit) and DVI for others (currently using the VGA adapter)? 

  I upgraded the stock graphics card when placing your order. I hope that I did a bonehead move and will still need to buy another graphics card.

  
  Thank you.
  

  Hello

  Psallo wrote:

  recently bought Pavilion 580t for my wife. Updated to NVIDIA GeForce GT 420 map graphics. But there are currently not able to determine if it supports dual display. When you check the Nvidia site, he says that all the stuff here. But this has only a DVI port. It also has an HDMI port. Do I need a spliter any for this?  Or can I use the HDMI port for a monitor (if the new monitors even come with this exit) and DVI for others (currently using the VGA adapter)?  Yes. You can do this.

  I upgraded the stock graphics card when placing your order. I hope that I did a bonehead move and will still need to buy another graphics card.

  
  Thank you.
  

  It shows what it looks like on the back of the graphics card?

  

  Best regards
  ERICO

• Dual display capability

  I own several PC Slimline box office 400-314. Supposedly, they are able to dual display. Can I just connect 2 monitors to integrated video connectors (one VGA and one DVI) motherboard and re - configure the OS Setup ' display? If so, I'll be able to expand the office and 2 browser windows open?... .or will the office be duplicated?

  Hello

  Review the specifications of the motherboard and such information as published at HP.

  HP has an official presence on this forum other than for administration and moderation. The help you receive is mainly by volunteers.

  If you have any other questions, contact HP support. HP support number is 800-474-6836 or 800-HPINVENT or online here.

• SX20 - dual display does not work as expected

  Español version. Spanish version

  Hola a todos.

  I have a Cisco SX20 dumb terminal license dual display. Tengo tambien UN con C20 the same license.

  1 - Cuando el C20 esta idle muestra el video en ambos monitored, TR dá local PC en the contenido entrada, entonces lo muestra in el Monitor 2.

  2 - Cuando el esta SX20 slowed muestra el video local solo el monitor 1, TR dá a PC en the contenido entrada, entonces lo muestra in el Monitor 2.

  3 - Cuando el C20 Esta en llamada, el video remote is ve en el monitor 1 y el video local to ve en el Monitor 2. Al compartir el monitor 1 muestra el contenido video remote y del video PIP local, el Monitor 2 muestra el contenido.

  4 - Cuando el SX20 Esta en llamada, el monitor 1 muestra el video remote y del video PIP local, el monitor 2 gray hasta permanent that envia contenido.

  Al final dejo lo descrito representando imagenes.

  How puedo hacer para as local video el y remote del SX20 is monitored separately cuando en muestre no is envia contenido?

  Esta el archivo del terminal config Editor

  English version. Frances version:

  Hello, everyone.

  I have Cisco and C20 SX20 endpoints. Both with dual display of the license.

  1. when the C20 is inactive, monitor 1 and 2 show the local video. If I connect a PC to the content source and then the monitor 2 shows.

  2 - when the SX20 is idle, just monitor 1 local video shows. If I connect a PC to the content source and then the monitor 2 shows.

  3. when the C20 is a call, 1 shows the remote video monitor and monitor 2 local video. While content sharing monitor 1 video shows distance and PIP local video, monitor 2 displays the content.

  4 while the SX20 is a call, monitor 1 video shows distance and PIP local video, monitor 2 gray yet. While content sharing monitor 1 video shows distance and PIP local video, monitor 2 displays the content.

  At the end are 2 pictures that show the problem.

  I want to watch the video video in separate screens where the content is not sharing (SX20) remote and local. How can I do?

  The xconfiguration endpoint is attached.

  Note: Sorry if my English is not so good.

  Sharong content:

  

  No sharing of content:

  

  I hope you can help me. Thanks in advance

  Hello Sharong-

  Change the following two parameters on your codec, and this should help you to what you want.  When TC6 came out and Cisco introduces new options of selfview, it changed how the codec have behaved and treated the selfview when using dual display.

  Video SelfviewDefault FullscreenMode: OnVideo SelfviewDefault OnMonitorRole: Second

  When content is sent, it will display on your secondary display selfview becomes a GLITCH on the first view  OnMonitorRole will on your second screen selfview when content is not displayed, and modepleinecran make selfview display full-screen when it is on the second screen instead of a PIP.

  For more information, you can take a look at the following bugs: CSCuh04746 and CSCuf74115.

• SX20 without dual display capable to share the presentation?

  Hello

  I would just clear my doubt

  SX20 is without option of dual display capable to share the presentation.

  If I understand correctly the SX20 installation sheet

  http://www.Cisco.com/en/us/docs/Telepresence/endpoint/quick-set-SX20/installation_guide/sx20_quick_set_installation_sheet_for_web.PDF

  Connect your main display on the HDMI color blue.

  With the dual display option, connect the second screen to the other HDMI output.

  It means that I can still share presentation even without dual display option

  Best regards

  Titebiket

  Hello

  Yes, you need not dual display of the presentation.

  Marius

• Explore Windows crashes when multiple instance are open on the dual display

  When I have several instance of Explorer windows open on the dual display and I start copying files from one folder to another folder, Explorer plant

  Thanks, it works for me.

  I uninstalled DisplayFusion and there are no more problems with the files to be copied.

• How photoshop round of dual display, each with a different profile?

  I am looking to buy the dual display for photo editing and would like to have each calibrated and profiled differently - 1 for web output and one for the print output. I use Mac OS and I understand that ICC (Photoshop and Lightroom) compatible applications use the system default profile to display the colors regardless of the operating system. I'm curious to know if photoshop is capable of managing 2 display profiles stored on the system to match each display? I am concerned that 1 only one profile can be defined by default and that he will use this profile for both screens.

  Yes, it uses a different profile for each monitor.

  But your thinking is dead wrong.  You do not calibrate and profile a monitor 'to print' or 'Web'.

  You calibrate and profile a monitor to display the colors better, more precise and natural, it can handle.

  The output is considered through Proofing (menu items "test" and "test colors" in the display menu of Photoshop), a topic on which you need to do a lot of reading.  Start with the help files in Photoshop.

• Dual display feature works not

  I work with the latest version of Speedgrade CC on an iMac 2010 running OS X 10.9, I also have a secondary screen connected to the iMac. When I activate dual display output, nothing appears on the other screen. I can see what needs to be on the second screen when I launch the application in the control of the Mission and he said "double active screen or SDI output" but when I try and go in the display using mission control, nothing happens. The MenuBar at the top of the screen, I see that I am using Speedgrade on this screen, but I can't see the video.

  Thank you. After browsing a bit more, I realized that it has been moved more than 1920 which meant that it was on a non-existent right display. Moving to-1920 left him.

• B570 display fails after the display dual display

  After doing that my B570 (1068) with an extended display, the unit has entered hibernation. Wake up, the laptop screen is indecipherable garbage. The second screen is performed to show the BIOS boot but then returns to the built-in screen - what is unreadable. Activating/Deactivating the F3 key does not get a good screen.

  I read another post suggesting that it is a hardware failure. What parts have failed?

  I was able to get the machine to dual screens (instead of expand). I downloaded the latest drivers from Intel Intel and reinstalled successfully their.

  The problem is still not changed - the built-in screen is distorted unintelligbly and the second screen normally. This signals a hardware problem... inverter or lcd display?

• HP probook 6470b - no display

  I'm looking for confirmation on the following problem:

  I have a HP probook 6470b that suddenly, the screen works on.   The backlight turns on, but no picture does not, not the start of Post for the HP logo or windows from the screens.  I suspect a bad LCD so I replaced it and I unfortunately have the same results with this screen (which I know to be a display of work).  The computer boots in fact facing upwards, and if I connect a monitor the output VGA port I work display.  Also, if I mount the unit on the docking station I get display on the connected monitors.

  If at this point, my suspicion is that the port that the LCD connects to the motherboard is damaged/bad, or the motherboard itself has somehow missed or malfunctioned.  In this case, I'll have to replace the entire motherbaord, I suspect.

  I tried the flush power / hard reset that I've seen suggested in all directions for almost every problem and this has no effect.  I also tried the recovery/reset Reset BIOS and had no change in symptoms.

  Does anyone have any thoughts or suggestions before I look at the replacement of the motherboard?

  Hello

  Very good diagnosis already done by you.

  1. you have connected an external monitor to the unit via the VGA and images are very well about this, which means that the rest of the functions are working properly.

  2. you have already replaced the display board, and the question is always the same. Thus, it is not a problem with the Panel.

  If the graphics drivers are all updated and works very well, we have the display cable (which is a separate part) that connects the display to the ZIF connector Panel (insertion force zero) or the ZIF connector on the motherboard itself.

  I work for HP.

• change to dual display lamp

  I have a dv9825nr and the display only stay on for about a minute before going empty, an external a spare part works fine. It is a dual lamp screen and I have a simple fire spare screen.  can you replace a double lamp with a screen of single lamp as well as the inverter?

  The problem usually is the placement of the connection cables. Try laptopscreen.com and you can watch the screens and the placement of the connections. The screens are less than $60 with shipping.