ProBook track

Similar Questions

• HP Probook s 4540: laptop can be Track with it, s MAC address

  A few days ago, I lost my phone at my University
  Must it be followed by using the MAC address?
  Because I have it, area in which she s MAC address, product no., serial number, etc. are written.
  Thanks in advance

  Hello

  I'm sorry to know that. Yes and no depending on many factors. The side Yes is very low and the side no. is huge:

  New 'user' does not change (or give a fake) or hide it when connect you to the internet.

  New "user" must be on the internet

  Tools ot tool to draw it down, to the right

  ...

  Kind regards.

• New Probook 4330 s comes with "No battery is detected.

  My new 4330 s Probook was delivered with yellow light flashing AC outlet.

  Wouldn't start on battery, it started when it is connected to the AC outlet.

  The reason seems to be that "No battery is detected", and this is shown in the lower right corner and the battery icon that is blank and shows a red cross.

  This problem has everything going and just randomly and when it just means that the laptop can not be used without be permanently connected to the power supply. It's very embarrassing for a mobile device, held by a person who travels a lot and he needs in terms of battery power!

  After 2 months of this problem coming and going, searching the Web, reading the forums of HP and contacting HP business support, I have tried the solutions only 3 they offered so far: -.

  1 turn off the laptop, remove the AC cable, remove the battery then press and hold the power button for more than one minute.

  Then restart on power supply and insert the battery once the laptop has started.

  This solution worked about once in nearly 20 times "No battery is detected.

  2 uninstall the ACPI control method driver compatible battery in Device Manager, then restart the laptop.

  It has never solved the problem.

  3. constant restarts and removals of battery and then reinsert.

  Sometimes, it seems to work, although generally this problem just back them and forth and so this solution can never be determined clearly as being correct.

  I have now connected another complaint with HP, but as is Easter, I won't be able to track until later this week.

  Someone at - it something to try please?

  I spoke with HP and after running through all the previous suggestions once again, the "No battery is detected" is always on display. HP decided to send a new battery in Exchange for one that should arrive in the next few days.

  However, at the same time, I have inadvertently discovered a very simple work around...

  Put the laptop to sleep with the charger plugged in.

  The yellow light on the entrance of ca then stops flashing and lights up, indicating that the laptop battery is now in charge.

  Wake up the laptop, you will see that the watch battery icon now loads and works correctly.

  The laptop will then continue to load to the full (changes from light yellow to blue) and will now run on battery alone.

  A battery using HP support assistant test now shows 'Battery OK'.

  Then guess the new battery is not necessary...

  Yes, HP or Windows 7 driver issue?...

• HP ProBook b 6450: issues of analog tapes to CD writing / Line-In

  I have a HP Probook 6450 b, with 6 GB of RAM, running Windows 7 Professional (64 bit), equipped with the card its Intel(r) Audio display and the IDT Audio Control Panel, v. 1.0.6300.0.  I think I'm beyond the novice PC user and can even remove and swap the components of the laptop with success, although the will come I hope not at stake in connection with getting suggestions on the problem I have right now.

  I'm trying to convert some audio analog tapes to digital format, for the eventual conversion for CD ROM media  I have a cassette player, which will provide the single channel output.  I also have a copy of Audacity, which I think is my best bet for capture and recording audio input.

  I concede that I understand partially the role of the application of the IDT Audio Control Panel software installed, but I have noticed that it installs an Line-In option on the registration tab on the sound, under the Control Panel icon.  I tried to choose that and checked the Line-In input option under the configuration of Audacity.  I have 3.5 mm cable to connect the audio output of the tape drive to the input jack (MIC), on my laptop, but after several attempts, no audio output seems to be forwarded to the laptop and daring.  The microphone on the laptop works very well.  By plugging in an external speaker, I know that the cassette player's audio output.  My sound card doesn't have a dedicated Line-In plug, but I inferred that the IDT Control Panel has been able to fill this lack of a Line-In Jack with Microphone input jack.  And my cassette player, has only the single output (headphones) card available.

  I have studied this subject of conversion band a lot, and I think my set-up is basically correct, but I think there is just a problem between the IDT Audio Control Panel and Audacity - software and my ability to record analog audio content successfully.  I will actively monitor this announcement for the next few days and provide comments/answers ready to any solutions/options/suggested questions.   Thank you!

  Well, the answer to this question was not quite what I was hoping it would be, but there are a lot of questions out there, and perhaps a less number of responses (sort of a philosophical statement on life I guess...).

  Anyway, here's some good news (I'm happier when I solve my own problems - although part of bread crumbs scattered along the digital track by some other bloggers, and some advice from right-to-target to a great Audacity manual online, were the key to the solution.)
  
  Thus, it is a few steps (apparently) to get this band to Audacity output that are needed.  As for me (for later, when I forgot), that everyone, here are the steps:

  1. You must select the input parameters (Line-In) on Audacity
  2. You need to direct the sound output of the original device (tape player, etc.) to the Microphone Jack (not the headphone jack)
  3. On my HP laptop, you access the control panel IDT Audio and under the recording tab - set Microphone as the default recording device (it will probably have been set for initial internal Microphone as default device).
  4. You must ensure that your audio in the Control Panel icon, that tab Recording Microphone is set as the default device.
  5. The recommendation of Audacity tutorial, apparently, it is necessary in certain circumstances to track the Transport > Audio peripheral Rescan or restart Audacity instructions.
  6. From there, you will need to activate recording on Audacity and then adjust the audio output levels, on your output device original or on the audacity input slider.

  And since the pictures are always better, here is the proof of the pudding... or in this case the sound.  I hope others down the road will find this solution useful.  I'm marking this resolved.

  

• Track Pad question

  Hello
  I have a ProBook and my cursor will not move once I log in... there is a light point size in the left corner of my Tracker Pad that is on
  What should I do to reactivate my cursor works?
  Thank you
  Herb72

  Hello

  Try double clicking the top left - if the light goes off, the trackpad is to be enabled.

  Kind regards

  DP - K

• ProBook 4520 s: product key for Windows 7 - unreadable sticker.

  Hello.

  The Windows pre-installed on the Probook 4520 s has been reinstalled with killing all the partitions on the HARD disk. Only after I saw that the product key on the sticker is unreadable. Is it possible to recover this key, if I have the serial number of the laptop?

  Thank you.

  Hello:

  Unfortunately, HP and Microsoft will issue replacement of OEM product keys, and HP doesn't keep track of the keys.

  Your only recourse will be to order a set of recovery disks from HP that will not need product key.

  If you live in the USA/Canada, call this number... 1-800-334-5144.

  Have the serial number of the PC handy to give to the customer service rep.

• problem with sound on my hp probook 4730 s

  I have a problem with the sound on my computer. When I play music the sound glitches. It doesn't happen all the time, but it happens at least once during each track.

  -----------------------------------------------------------------------------------

  HP probook 4730 s, windows 7 Professional (64 bit)

  Hello:

  If you have the last HP power assistant software installed that may be the culprit.

  Please read this message and the solution is late... install an older version of the wizard of power.

  http://h30434.www3.HP.com/T5/notebook-PC-sound-and-audio/sound-issue-ProBook-4530s-partial-solution-need-the-rest/m-p/960383/highlight/true#M16505

  Paul

• removed the audio tracks in logic pro can be restored

  removed the audio tracks in logic pro can be restored, has been save logic & empty folders to the folder came, I deleted the originals by mistake...

  Not if you don't have the original audio files on your hard drive.  If you have deleted original, your only hope he then restore from a backup of your system, you have a.

• Track return on a hike

  There is a nice piece of functionality with Garmin watches that retrace your steps using the GPS while hiking. It doesn't load the maps or something like that but displays your breadcrumb to let you know where to turn when you're in unfamiliar places. It was extremely helpful during a hike of new tracks that have side trails. Apple Watch there something similar? I know there are a few applications which do this, but was curious to see if there was anything from the watch without using the iPhone's GPS.

  Hello

  It is currently not a feature of the apps built on Apple Watch.

  If you want to send your comments or suggestions to Apple, you can do it here:

  https://www.Apple.com/feedback/watch.html

• Can Apple Watch track a swim in an endless pool

  I work in an endless pool, which is actually a treadmill for swimmers. You will stay in one place and swim your heart while it blows a current against you to keep you in place in the small pool.

  I see that the watch can track laps, which is controlled by setting the distance of your pool so that he knows what is a length is, according to me. I also see that it can follow a free bath, and I guess it's GPS.

  No one knows if she can count the strokes? Or does anyone have an overview if you think it would work to track the swimming event in an endless pool where 1) don't stop and turn around each 'x' distance and 2) you also do not travel any distance to what a GPS is?

  Thanks in advance...

  N °

  Apple Watch uses GPS to track your progress in Open water swimming mode and titles towers during swimming in the pool swimming mode. The endless pool does not have to happen. As to count the strokes, I think it's (quite well know for that), but they do not report this information. Because they do not know to what extent you swim by race, they can use that to calculate your distance. However, I can see a future update where they have an Endless Pool mode when you enter the speed of the pool (assuming that you can set as a treadmill).

• Apple TV & multiple language tracks

  I have a video that has several tracks different languages (English, French, Japanese) in my iTunes library on my iMac.

  I watch this video via the home sharing on my Apple TV 4.

  When I watch the video in iTunes on my iMac, I can easily choose what language track to listen to.

  However, I don't see any way to choose which language to use when I watch this video on my Apple TV.

  Is there a way to select the track of language on my Apple TV?

  Thank you

  -Mike

  Hello. What happens if you drag to the bottom of the remote control during playback of the video? You should see a details pane. You must then scan left for audio. Then you should be able to select the audio track, as long as the file is a format by ATV suppprted.

• How to 'get the names of the tracks"in iTunes 12?

  Previous versions had 'get' track names in the menu dropdown.

  12.5 iTunes does NOT seem to have this option.

  So what can I do to use the internet and the Gracenote database?

  I found this page - but it doesn't seem to be any help, I have nowhere in my iTunes App can find the 'options' click symbol. (of course, this page may NOT be about this 12.5)

  <iTunes for Mac: If you do not see the song information>

  iTunes for Mac: If you do not see the song information

  grateful for any comments.

  w

  Hello

  As with many things in the new version of iTunes, changed the way to get information. For example, when you insert a cd, the upper right corner shows CD Info, CD Import, a new icon that looks like a gear wheel! and the eject button. Click the gear and it shows get track names etc.

  If you have already imported the CD, you can retrieve the info by clicking on file > library > get the track names.

  Jim

• Will the 2 series watch track swim properly if using a kick Board (without using arms to swim)?

  I have a friend that is considering a 2 Apple Watch series.  It will systematically use a Board during training for her swim meets.  The new Apple Watch will follow distance and calories correctly even if it does not use his arms while swimming with a surfboard?

  I used my series 2 during my bath today for the first time. It does a great job of tracking my laps... freestyle, free with paddles and open palms. But he is not one of my kicks. I threw it only Dolphin on my back (without arms). I swam more than 250 kick 3500yds, it does not register at all. Next time I might try on my stomach, but without a Board of Directors and use my arms a little to breathe.  Overall I was impressed but.

• My iPhone GPS to track a car trip

  My iPhone GPS to track a car trip? What app (s) do I need?

  Do you mean you want to keep a record of the trip? As on a map? Or you just want to follow something like mileage?

  I use a unit called 'Automatic' that plugs into the ODB port on my car. Depending on what you want to do, it may be an interesting option.

  https://www.automatic.com/

  The TRIPS agreement is indicated on a map. Some travel details can be exported to a worksheet.

• Playback of Albums into tracks

  I noticed this weekend when playing an album through AT4 albums where the tracks have been dismantled into parts have a click or gap inbetween tracks. The tracks do not play flawless, as they say on an iPod.

  For example, I have a few albums of Jean-Michel Jarre who play gaplessly on my devices OS but have a standard deviation of reading on the tracks "joined" the gaps in reading have so the AT4 (titles are not gapless as as they are broken down into "First party", "Second party" etc..)

  Playback on OS devices is gapless, but on AT4 it treats them as standard titles with a second 1 gap between the two during playback of the entire album.

  Is it possible to change it without having to merge the tracks when importing from CD in a 40-minute track?

  I saw nothing on the Apple TV to change the experience. I could not have looked hard enough of course, but generally, I know where most of the settings are.