Professional printer Photosmart 8750

How can I correct when printing the page to print on larger paper such as the size of the border 13 x 19 is not straight but is tilted vertically to the right of top down and the cradle is stuck?  I tried to troubleshote the convenience of color calibration and alignment, but the did not help me fix this printing error.

Thank you

Smoothery

There are two possible problems, I'll start with the most likely:

If the coding Strip has become foggy with spray of ink then printing can move to the side and eventually cause a stall of transport message.  In this case, you can gently clean the Strip coding as described in the post here.  Don't forget to heed the warnings, the Strip is fragile and can be damaged by rough handling.

The other possibility is that the media feeds with a chisel.  In this case rolls of cleaning as described in the solution of the here document four can help solve the problem.

The can also help document here.

Tags: HP Printers

Similar Questions

  • HP Photosmart 8750: HP printer Photosmart 8750 updated the drivers/software

    I bought a HP Photosmart 8750 printer when I was running Windows98 and never installed it.  Since that time, we have a computer that is running Windows Vista Edition Home Premium (32 bit) and a laptop under Windows 10 Home (64-bit).  Recently I tried to install the printer on the two systems only to find out that HP has stopped support for it.  Can someone help me find updated drivers/software or am I have to switch the printer during a yard sale?

    Thank you for your time.

    Hello @GMan46,

    Welcome to the Forums of HP Support! I see that you are trying to install your HP Photosmart 8750 on your computers running Windows Vista and 10 operating system.

    Because it is an older model of printer, you will need to install the software that you are using the driver integrated in Windows. This is not guaranteed, but may work for you.

    Start here: installation and using the built-in Windows print driver

    This aid?

    Let me know the results. If this resolves the problem please let others know to mark this message as "accept as Solution".  Just say thank you, please click the ' Thumbs Up ' button. If you need more assistance let me know and I will gladly do whatever I can to help.

  • Printer HP Photosmart 8750 on Windows XP, do not print within the frame.

    Printer HP Photosmart 8750 on Windows XP does not print photo correctly and cannot be adjusted manually to print in time. Printing is too high or off the coast on one side or the other. How can I fix this?

    Hello

    Try to download and run the doctor print and scan located here:

    http://support.HP.com/us-en/document/c03275041

    It can fix its own much and if not to give a better idea of what is happening.

    Good luck!

  • Photosmart 8750: pilot built-in printer in win 8.1 64 bit does not

    Hello

    My photosmart 8750 printer, which is a great printer and still works fine, at least with my old laptop that runs windows xp not... Unfortunately with the built-in windows 8.1 HP printer driver (64-bit) does not at all.

    What's the case up to now, first time connected, the printer is recognized by windows 8.1 and the driver is installed automatically, if a printer test page send it prints normally. But it is she, anything else, pdf, word doc or an image will not print!

    The printer responds to a print command, to start something that looks like it's going to print, but after a few seconds it stops and nothing happens after that, if I look in the dialog box where the docs are normally listed as they wait to be printed there, I'veallready restarted the service of spool printing, but that has not worked... also reinstalled the printer some times , but that did not help...

    My perception now is that the driver for win 8.1 is the problem, because the printer works fine with the original HP driver on my laptop to win XP.

    If all goes well, there is a work around for this problem...

    Thanks in advance for any help!

    Diederik

    Hello kwikkwekkwak,

    Welcome to the HP Forums.

    I see that you are seen and problem when you try to print from the computer.

    I suggest that we start by running the HP print and Scan Doctor.  Please let me know if you see messages or error codes.

    Thanks for your time.

    See you soon,.

  • HP Photosmart 8750: Cannot find my printer HP Photosmart 8750 installation CD

    I accidentally uninstalled the element during. My Photosmart 8750 printer.  I am a photographer/writer and almost impossible to believe that I did... AHHHH!   My cd, I keep in a notebook FULL of tips to installation over the years and which has yet to be found.  Is it possible to download from the internet/HP site.
    ALSO, I am a novice with computers, but I'm in the season of LEARNING, LEARNING, LEARNING.  I have a HP 6877with 64-bit, uh Home premium to windows 7. Let's see the processor (whatever it is?) is AMD athlon II X 4 645.  GZ 310

    Is it enough.   TYou Nicole Ramirez

    Hello

    1. Please use the Vista driver and install the latest updates from the following link:

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2100&LC=en&cc=us&DLC=en&sw_lang=&product=426109#n195

    2. nothing is enough depending on what you are willing to do on your computer. Are you happy with it now?

    Rgards.

  • Photosmart 8750 printer unable to be recognized by apple laptop running on Maverick

    Hp photosmart 8750 printer may not be recognized by my Macbook when connected by USB.  Apple support has isolated the printer problem.  With the printer connected to the computer only says printer 'offline' and 'not connected '.

    Computer Apple laptop running Maverick and printer should be recognized when connected. Also have tried different cords USB and tested USB ports that are functioning normally.

    Please notify

    Thank you.

    Hi mdjec00, welcome to the forums there.

    I saw your post on your printer has demonstrated that it is in offline mode on your Macbook, running the Mavericks. I would say after the steps in the guide below.

    "The printer is offline" Message appears on the computer and the printer does not print: Mac OS X

    If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

    Happy Monday

  • Photosmart 8750

    Hello

    I have the Photosmart 8750 and I'm in the army. I bought the printer to the base Exchange. When the necessary printer ink base was not for my printer. I'm stationed in Germany for the short exchange of stuff fast enough. I went into town and found a store that sells HP products and the rep at the store understood what my required printer. I bought cartridges and taken home and installed them and they worked as the cartridges supplied with the printer. Later in the year, I need cartridges this time that the base has them. I have bought and taken home and installed the but now the printer says they aren't valid cartridges. A store in rep (Exchange) HP told me the reason was I used cartridges that I received from a German store. How can I fix this problem so I am able to use the cartridges I got the Base Exchange. I have been deployed or I'd do this 9 months ago. Or am I stuck with a brick of $450.00. Anyone who has been stationed abroad knows how sometimes it can be difficult when you need something and you are forced to go on the local economy to find.

    Thank you

    Thanks for the update on the support of Mac.  Wasn't the case a few years before, when I was involved with the issues of regionalization.

    Kind regards

    Bob Headrick, MS MVP printing/imaging

  • HP Photosmart 8750: Deteriorated HP Photosmart 8750 support?

    I use a HP Photosmart 8750 to print both color and black & white photographs.  By various sources, including HP (for example, http://www.letsgodigital.org/en/news/articles/story_3703.html) the best collection of ink to this end is 97, 101 and 102, which gives a system of "9 - ink".  Cartridges, 101 and 102 no longer seem to be available through HP.  A scheme of substitute using cartridges currently being advertised at http://store.hp.com is 96, 97 and 99.  By HP, this yeilds a '8 inks system' which results lower than the 9-ink system.  You find this is the case?  The Internet also contains scattered observations that the 96 cartridge is not suitable for use with the glossy photo paper because ink bleed.  True?

    In summary:

    1. the ink cartridges 101 and 102 permenantly abandoned?

    2. is the quality of the photos printed with 8 inks system lower than the 9-ink system (including black & white prints)?

    3. making prints with smear cartridge 96?

    4. If the answer to (2) or (3) above is 'yes', HP please consider reversing his decision to demote his support for the HP Photosmart 8750 printer?

    I hope that you do not find this post a simple duplication of others.  Other posts seem to ask most of these questions, but not directly respond.

    I can't say with certainty what will be the Linux driver.  The Apple and Windows driver turns off the black cartridge 96.  The 101 cartridge wouldn't be helpful to print B & W prints.  Using the cartridge 99 would give better black areas in photo.  The lighter grey areas would be probably made go magenta cyan and light ink light cartridge 99 in most of the 97 cartridge yellow.

    The HP 100 gray photo cartridge is a reduced version of the 102 (15ml of ink to the 100 HP vs 23ml in the 102 HP) and would work in your Photosmart 8750.  It may still be available at HP, it is still listed on the site HP SureSupply , well as "out of stock".  If this isn't the case, HP, it may be possible to find some other suppliers.  (I checked staples and OfficeMax, both were out of stock).

    The Photosmart 8750 is beyond the official support, and most of the documents have been removed from the HP site.  I don't have to find the manual to the user on the site of HP here (recommend registering before he goes) and it lists the optimal configurations of cartridge on page 13:

  • Router Netgear does not recognize the HP Photosmart 8750 (wired connection)

    My Netgear WNDR3300 router seems to block my ethernet connected the HP Photosmart 8750 printer. The printer does not appear in the list of the router of connected devices and network printing shows that the network status is offline.

    How can I get the printer and the router to talk to each other?

    Also, I checked the cable and tried to use a different port on the router; no change.

    Found the problem...

    I shined a flashlight in ethernet printer ports and found two sons/connections are folded. :-(

    If all goes well, not too expensive to fix.

  • Photosmart 8750 and IMAC

    I have a Photosmart 8750, which works very well with my windows laptop but when you print with IMAC using the latest version of Safari colors are all faded, the greys are orange etc..

    If print text in red, blue, green and yellow, the impression is very good. I cleaned the print heads, removed the printer and reinstalled but still not good.

    Any thoughts?

    Concerning

    David

    10.9.2 IOS

    No, I did what you suggested, but this has not resolved the problem unfortunately.

    I also have a HP Envy 120th and I can get pictures of very good quality of this print from iPhoto. But with the 8750 I get always the washed colors when you use the HP Photo paper, but oddly enough, the colors are OK when printing on plain paper. Enigma for me - any other thoughts?

    David

  • Windows 7 driver for printer / photosmart premium

    I installed windows 7 on my hdx 16 and I need drivers for the printer / photosmart premium 309 c. Someone at - it a chance for the two to work together?

    Thank you

    Russ

    I downloaded version 13 and have tried to install/uninstall several times. This includes the removal of the printer devices and Device Manager. When I try to reinstall I usually get a fatal error during 'configuration', the last step. I can print to the printer and I can run most of the photo. The center of solution won't work, which is a key piece of software for this printer. Any ideas?

    I'm running Windows 7 Ultimate (not beta). This software is properly installed on virtual xp but I prefer to run from 7.

    Thank you

    Message edited by russ1 on 10/14/2009 12:15

  • Photosmart 6525: auto efax print photosmart 6525

    Efax account and can receive fax, but only show up as an email. Q: a possible incoming fax to print automatically?

    The printer (Photosmart 6525) allow Eprint and connected.

    Appreciate any help,

    Frank

    Hi Frank,.

    Incoming faxes can be printed automatically, for that you must update the HP ePrint email in the settings of efax.

    Connect your user on eFax.com and change preferences as follows:

    • Sign in to your eFax account.

  • Photosmart 3310 printer: HP "Solution Center" can't find printer Photosmart 3310 on local network

    Hello

    My printer Photosmart 3310 scanner was working fine, but I recently had to reinstall the HP Solution Center software.

    Now the solution Center can not find my printer on the LAN.

    • I can connect to the printer via its IP address and see all the information about the printer and scan
    • Printing and scanning doctor can find the printer
    • Windows can see the printer and print

    But the HP Solution Center can not find the printer to install it, even when I type the IP address of the printer in the 'wired network' installation part of the Setup program.

    I used the latest version of the HP Photosmart and Officejet full feature software and drivers (August 2015).

    I don't know what else to do to try to get the HP Solution Center to find my pronter, I disabled the firewall, I tried to connect wireless and USB, but nothing seems to get the solution center to recognize my printer.

    Any suggestions?

    Concerning

    Hello

    Published on the website of HP software seem to be evil and not one used for your printer.

    I have notified HP to get this fixed number

    Run the installation once more and select uninstall to remove it from your PC, then restart your PC.

    Finally download and install the following software, it's good:

    http://ftp.HP.com/pub/softlib/software13/COL30951/MP-110165-3/AIO_CDB_Net_Full_Win_WW_140_408-5.exe

    See you soon,.

    Shlomi

  • compatible product for printer / photosmart premium to individual ink colors

    Can someone suggest and similar for the best as a replacement for my printer photosmart/premium.

    Also is there all of the printers that use individual inks as I believe that these new lights to be expensive cartridges.

    Thank you

    Hi @morrisminor

    What Photosmart model did you have before? There are different printers IIC (individual ink cartridges) at the present time, all depends on what additional features you are looking for.

    Mainly interested in photo printing, or a mixture? Many of the new printers Officejet IIC are very good. Check out the Decisionator...

    No matter what q to all please come back and I'd be happy to help you

    Ciara

    http://WWW8.HP.com/us/en/ads/ink-decisionator/overview.html

  • Automatic duplex printing - Photosmart 310 has

    I have a new printer Photosmart Premium e-All-In-One C310a. In highlights eco told me, ' save the document of up to 50% with automatic duplexing.»

    Since I assumed this printer could do that, but I was not able to find out how.

    The seven-page document that comes with the printer isn't really a "user guide". Its more like a summary of features, very few 'how to' save for a step 4 put in place the process.

    The C310a has the ability to print two-sided documents automatically and if so, how?

    Thank you

    Hello Bobst,

    Regarding my info tells me the device supports automatich duplex printing, but needs a duplexor to do. Some models are sold with the already installed duplexor and some models are not. So in this case, you will need to buy a duplexor. TO see if you model has an installed duplexor check the back of the unit. If installed it should look at there is a black brick that comes out of the unit.  Click HERE for more info on this duplexor, its two-sided printing accessory.

Maybe you are looking for

  • Reading of temperatures using PXI-4351

    I can't configure my PXI-4351.  I can't read a measure of a thermocouple unless I run NI MAX Test Panel for the temperature at the same time as I run my Labview code.  If I open the test panel and configured to read a thermocouple, my labview code wi

  • set up outlook express and change the ip address on windows xp

    I would like to set up outlook express and to change my ip address on windows xp home

  • WRT54GS v.5 record

    When I tried also to register, the selection of pull-down version was: 2.0 Wireless G Broadband Router, 1.0 router Wireless G Broadband. There was no v.5 to select. Just what "version" do I?

  • Hidden partition appears when it is open to the top of my computer

    I have recenetly had to do a clean install on my Acer 5520 Notebook. Back up be corrupted when I used the command D2D, I had to do a clean install of WinVista Home Premium 32-bit with my other drive of WinVista pc. I just change the product code. All

  • PC turned off when closing... watch as the powers off...

    For some reason any about a week and a half my PC turns off is more when I go to shut down in the Start Menu as I have always in the past. The monitor stops, but the tower is still on. I'm tired, trying to understand what is happening... virus scans