Profile of user charge (blue screen)

After typing the password for my user account, the computer has taken a lot of time to load and then after he loaded loaded a blue flat screen with no word. My mouse is visible on the blue screen. I let it sit for half an hour and it entered into mode 'sleep'. The only way to turn off the computer after that had to hold down the power button. It wasn't an error screen, it was completely blue.

So now I'm on the computer in safe mode and I ran a disk check and I conducted a virus check and nothing turned up. I tried to restart, the profile does not always load. None of the other profiles will not load. I do everything in safe mode.

I checked the events administrator and he said there was a bad block somewhere on the hard drive, but now I can't find the event again to get the number that went with it.

I'm not very good with computers, so I have absolutely no idea what to do.

·                         Restore point:

Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

Try a restore of the system once, to choose a Restore Point prior to your problem...

Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

If the above does not work:

http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

Difficulty of a corrupted user profile

After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • I stop my new laptop with Windows 7, install new updates. But now my laptop won't charge. There only dark blue screen. He won't even have to sign on the screen. Someone at - it happen?

    I stop my new laptop with Windows 7, install new updates.  But now my laptop won't charge.  There only dark blue screen.  He won't even have to sign on the screen.  Someone at - it happen?

    Hi ctgreen

    Welcome to the Microsoft Answers site!

    You can try the following and link methods under each method for more information on the same and see if one of them solve the problem.

    Method 1: Start the computer in last good known Configuration

     

    1. Remove all floppy disks, CDs and DVDs from your computer and restart your computer.

    Click the button start , click the arrow next to the button lock , then click on restart.

    1. Do one of the following:

    ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

    ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start, and then press F8.

    1. In the Advanced Boot Options screen, use the arrow keys to select last good known Configuration and press ENTER.
    2. If your computer has multiple operating systems installed, use the arrow keys to select the operating system that you want to start using the last good known Configuration, and then press ENTER. Windows will then resume starting normally.

    http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

    Method 2: Start your computer in Mode safe

     

    1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

    Click on the Start button , click the arrow next to the lock button , and then click restart.

    2. do one of the following:

    o If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

    o If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode and press F8.

    3. in the display Advanced Startup Options , use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see Advanced startup options (including safe mode).

    4 log your computer with a user account with administrator rights.

    When your computer is in safe mode, you'll see the words Safe Mode in the corners of the screen. To leave safe mode, restart your computer and let Windows start normally.

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    If you are able to access the desktop in SafeMode I suggest you read the article in the link below for instructions on restoring the system.

    http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

    Concerning

    Varun j: MICROSOFT SUPPORT

    Visit our Microsoft answers feedback Forum

    http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think.

  • Start normal mode after windows xp bar charge it gives black screen and in safe mode it gives blue screen

    Victorinox original title: Black scree & blue screen...

    So my laptop that is running Windows xp, start in normal mode after windows xp bar charge it gives black screen and it stays like this, and in safe mode it gives blue screen, what can I do? I need your help atleast to save the files to my hard drive...

    Hello

    · What is the error code or error message that you receive when the computer starts in safe mode?

    · Were there any changes made on the computer before the show?

    · What is the number and the model of the computer?

    · Who is the service pack installed?

    Try the methods below:

    Method 1: Disconnect all the devices connected to the computer such as printers, scanners or USB hard drives and restart the computer and check if that helps.

    Method 2:

    Try to start your computer in last known good configuration. You can check the link for the procedure: how to start your computer by using last good known Windows XP Configuration: http://support.microsoft.com/kb/307852

    Method 3:

    You can follow the steps listed in the link: after the Windows Logo appears, or after you log on Windows, a Windows XP computer can display the wallpaper, a black screen or a blue screen: http://support.microsoft.com/kb/318027

  • blue screen after replacing the battery and charger / need of Windows XP Pro disc

    Hi all.

    I bought a used laptop from gateway with Windows XP Professional already on it. The person I got it never gave me the disc of Windows or textbooks and it is out of warranty. I had to replace the battery and the charger after 3 months of use, and it now gives me the blue screen.  I can't enter in safe mode, it gives me just all sorts of codes for Win32 /? (different things). SYS. The blue screen also tells me if this keeps continues to go to F8(Advanced Options), and then choose the option. I called my local tech and he said contact Windows to get a disk to fix the problem. How can I do (I'm not a comp WIZ). So I try here to get any help. I am on a borrowed laptop so if you can help, please send me a personal email to * address email is removed from the privacy *. I get their

    After reading the owner's manual for the NX260X (Chpt. 7, p. 72-74) I am convinced that the laptop, as previously indicated above by PML, is originally came with Windows Vista.
    http://support.gateway.com/s/manuals/mobile/8511886.PDF

    In addition, according to the instructions of the manual recovery (pg.74, means only available recovery Windows are re - install using the supplied DVD.) This is meaningless given that bridge claims the recovery partition was part of laptop computers sold after November 2004.  I agree that, if you decide not to try to fix the errors, you should consider Windows 7.

    However, personally, I would try to fix the mistakes here before you spend a minimum of $100.00 for Windows 7. We usually have a pretty good success rate when the OP stays with the subject.

  • Unable to connect to my profile at the start, the SCREENS ' SAYS the PROFILE SERVICE does NOT have the USER logon

    "Unable to connect to my profile when starting, SCREENS SAYS'THE PROFILE SERVICE does NOT have the USER logon"

    Profile of user could not be added

    Hello

    1st thing to try is the system in safe mode restore to before the problem

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not solve it read more

    read the tutorial below

    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

    The user profile Service has not logon. User profile cannot be loaded.

    http://support.Microsoft.com/kb/947215#letmefixit

    Your user profile was not loaded correctly! You have been logged on with a temporary profile.

    http://support.Microsoft.com/kb/947242

    If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile.

    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  • Blue screen after logging on a user account

    Remember - this is a public forum so never post private such as e-mail or telephone information. I am an administrator and when I connect I just get a blue screen - nothing else.

    Can connect you to other users of the PC, but they don't have administrator rights.


    Hello

    What does the blue screen say? What BCCode or stop Codes and other information?

    You can use the SafeMode - tap F8 repeatedly that you start - select Mode safe mode with networking
    to troubleshoot as needed.

    ==========================================================

    Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
    Troubleshoot the BlueScreens - top 3 answers.

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    You can use BlueScreenView to stick the BSOD info in a message here.

    Run BlueScreenView-

    NOTICE - report HTML all THE ELEMENTS or right-click on a BSOD line and select the same. Then, copy and
    Paste the line in a message here. Make sure and check the file name section. Also check the time
    in MyEventViewer for more information as possible.

    MyEventViewer, which is also easy to run, may reveal information if check you in time
    the BSOD (the time BSOD appears in BlueScreenView and want to check on that)
    exact time or a second or two before it.

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • User of Vista Ultimate window gets the blue screen BUGCODE_USB_DRIVER

    I recently started to see the BUGCODE_USB_DRIVER error with a blue screen.  I have several of joint external HARD drive, but they were tied before we see this error code.  All the patches?

    Hello

    This problem may occur if the USB composite device has enabled selective suspension function. This problem occurs even if the USB composite device supports the selective suspend feature.

    To resolve this problem, obtain the latest service pack for Windows Vista and install it.

    For more information, see this link:

    http://support.Microsoft.com/kb/930568

    It will be useful.

  • Satellite L755 - 16L gives the blue screen and physical memory dump

    Please advice

    I bought my L755 - 16L in the month of August.
    Until last week it went very well.

    Last week I'm going to visit another country he only has the 240V voltage.
    Normally at home, I use 100V power supply for my laptop.
    After my return when I connect top of laptop and the go blue screen screen work and grant discharge mini information of physical memory.

    Usually, I unplug the charger after the judgment.
    The next day if I start the computer, the computer gives the blue screen and physical memory dump.
    If not unplug the charger after stop down and don't use the next day then no problem.
    Please advice what can I do to stop this problem.

    This is the report of errors in Event Viewer.

    "The system has rebooted without judgment properly first. "This error can be caused if the system unresponsive, crashed or unexpected power loss.
    System

    -Supplier

    [Name] Microsoft-Windows-Kernel-Power
    [Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

    Event ID 41

    Version 2

    Level 1

    Task 63

    Opcode 0

    Keywords 0 x 8000000000000002

    -TimeCreated

    [SystemTime] 2011-11 - 27 T 10: 43:19.248036500Z

    EventRecordID 48763

    Correlation

    -Execution

    [ProcessID] 4
    [ThreadID] 8

    Channel system

    Computer toshiba-TOSH

    -Security

    [User name] S-1-5-18

    -EventData

    BugcheckCode 30
    BugcheckParameter1 0xffffffffc0000005
    BugcheckParameter2 0xfffff80003717ce5
    BugcheckParameter3 0x0
    BugcheckParameter4 0xffffffffffffffff
    Fake SleepInProgress
    PowerButtonTimestamp 0

    Hello

    In general the BSOD is the product of the problem of hardware or software problem. To check if it of software or hardware associated with deliver its necessary to reinstall the OS and check if the BSOD will appear using the new OS preinstalled.
    Of course, it s painful to do that because the recovery procedure would format the HARD drive and therefore the data backup is necessary!

    I don t think that the different input voltage might affect the functionality of the laptop computer because the laptop uses the universal adapter that supports entry 100V-240V.

    BSOD can be caused by faulty memory modules so I think that this test of memory could be useful also

  • have files on a drive that have been defined as private and the need to open. Disc got a blue screen

    On my laptop, I had a logon administrator who has been in private. The computer has a blue screen. I ran the XP CD repair disk and that took care of the blue screen, but it would not go as far as allowing me to re-authenicate the license on XP. It froze just straight up. I took chase him and attempted to transfer the files to another drive, and authorities wouldn't allow it. Need either re authenticate the reader to allow access, or find a way to UN-encrypt files and transfer them.

    Hello

    • What is the error you receive on the license?
    • You are able to start Windows after the installation of repair?

    If you are able to start, you can check out these methods:

    a.Open workstation
     
    b. double-click the drive where Windows is installed (usually drive (C :), unless you have more than one drive on your computer).)

    If the contents of the drive is hidden, under system management, click Show the contents of this drive.
     
    c. double-click the Documents and Settings folder.
     
    d. double-click your user folder.
     
    e.Right - click on any folder of your user profile, and then click Properties.
     
    f.On sharing tab, deselect make this folder private so that only I have access to it check box.

  • How can I stop my computer with a blue screen coming up and crashing

    Hello

    my computer keeps crahing with a blue screan befor, I ran anti spy wear and its projection up to nothing. When it reboots it says. from what I can tell, it's the same thing all the time.

    help please

    Signature of the problem:

    Problem event name: BlueScreen

    The system version: 6.0.6001.2.1.0.768.3

    Locale ID: 3081

    More information about the problem:

    BCCode: 50

    BCP1: 9131EB99

    BCP2: 00000001

    BCP3: 886F7C45

    BCP4: 00000000

    OS version: 6_0_6001

    Service Pack: 1_0

    Product: 768_1

    Files helping to describe the problem:

    C:\Windows\Minidump\Mini080812-03.dmp

    C:\Users\ricky g\AppData\Local\Temp\WER-440422-0.sysdata.xml

    C:\Users\ricky g\AppData\Local\Temp\WER204C.tmp.version.txt

    Read our privacy statement:

    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

    Hello

    Pick up the pieces after a computer breakdown - see what to do if Windows won't start correctly
    http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

    To BlueScreen troubleshooting methods using BlueScreenView and MyEventViewer
    See my answers, if this thread - top 3 responses (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if you make them available at the SkyDrive or other
    file sharing sites (such as MediaFire). If you have problems downloading the minidumps
    Copy it to the desktop or Documents folder and download them from there.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    -------------------------------------------------------------------------------------------------------------

    BCCode: 50 0 x 00000050

    References to Vista also apply to Windows 7.

    Have you recently added any hardware? Have you updated any drivers just before these
    has started? (Check control panel - updates of Windows to see if all drivers have been updated
    all the time this started) guilty likely hand are video driver, other drivers,.
    memory and antivirus/antispyware/security products could be at fault, but also in car
    questions.

    Use the troubleshooter below and refer to the following message for pilots and memory
    When you get these sections and then back to the resolution of the problems according to the needs.

    BCCode: 50 0 x 00000050

    Cause

    The BCCode 50 usually occurs after the installation of the defective material or in case
    failure of the hardware installed (usually associated with a faulty RAM, either main memory,
    Cache L2 RAM or video RAM memory).

    Another common cause is a defective system service installation.

    Antivirus software can also trigger this error, as can a corrupted NTFS volume.

    Solve the problem

    Solve a defective hardware problem: If the material has been added to the system recently,
    Remove to see if the error recurs. If existing hardware has failed, remove or replace
    the defective component. You must run the diagnostics of material provided by the manufacturer of the system.
    For more information about these procedures, see the manual of your computer.

    Fix a defective system service: Disable the service and confirm that this
    resolves the error. If so, contact the manufacturer of the service on a possible system
    Update. If the error occurs during the system startup, restart your computer, and press F8 to
    character mode menu that displays the choice of operating system. As a result
    Windows Advanced Options, select last good known Configuration option menu.
    This option is most effective when a pilot or a service is added at a time.

    Solve a problem of antivirus software: Disable the program and confirm that this fixes
    the error. If this is the case, contact the manufacturer of the program about a possible update.

    Fix a corrupted NTFS volume:  Run Chkdsk /f /r to detect and repair disk
    errors. You must reboot the system before the start of the analysis of disk on a system partition. If
    the hard drive is SCSI, check for problems between the SCSI controller and the disk.

    Finally, check the system log in Event Viewer for additional error messages that might help
    identify the device or driver that generated the error. Disable the cache in memory of the BIOS
    could also resolve it.

    BCCode: 50 0 x 00000050<-- read="" this="">
    * 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-

    -------------------------------------------------------------------------

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard event viewer
    Windows. TIP - Options - Advanced filter allows you to see a time rather
    of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue
    Screen info that would help. Such as ITC and 4 others entered at the bottom left.
    And other information such as codes STOP error and info such as IRQL_NOT_LESS_OR_EQUAL
    or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during ' blue screen of the.
    death ' crashes and displays information about all accidents of a table.
    Free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
    However, there are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Does not work
    tell all possible driver issues).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Blue screen - random computer restart

    My computer stops randomly several times a day, which gives a brief overview of a blue screen, then restarting.

    I just installed Windows on a new hard drive. The only thing that have been added (in addition to the hundreds of Microsoft updates a through Windows updates) is McAfee Security. When I started getting blue screens, I disabled McAfee at the start, but I still get this problem. Installation of McAfee is the first thing I did, so I don't know whether or not this problem existed prior to this installation. Here is a copy of the report to blue screen:

    Signature of the problem:
    Problem event name: BlueScreen
    OS version: 6.0.6002.2.2.0.768.2
    Locale ID: 1033

    More information about the problem:
    BCCode: a
    BCP1: 00450076
    BCP2: 00000002
    BCP3: 00000000
    BCP4: 81C3B304
    OS version: 6_0_6002
    Service Pack: 2_0
    Product: 768_1

    Files helping to describe the problem:
    C:\Windows\Minidump\Mini050412-02.dmp
    C:\Users\*name*\AppData\Local\Temp\WER-648765-0.SysData.XML
    C:\Users\*name*\AppData\Local\Temp\WERBE78.tmp.version.txt

    Hello

    If you decide to remove McAfee and then uninstall it and then run the McAfee removal tool
    to avoid debris that can cause strange problems.

    McAfee removal tool
    http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

    List of tools to clean/uninstall anti-malware programs
    http://answers.Microsoft.com/en-us/protect/Forum/protect_start/list-of-anti-malware-program-cleanupuninstall/407bf6da-C05D-4546-8788-0aa4c25a1f91

    Uninstallers (removal tools) for common antivirus software
    http://KB.eset.com/esetkb/index?page=content&ID=SOLN146

    -------------------------------------------------------------------------------------------------------------

    Here's what I use and recommend: (these are all free and very effective versions.)

    Avast and Prevx proved extremely reliable and compatible with all I have
    launched on them. Microsoft Security Essentials and Prevx have also proven to be very
    reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

    Avast Home free - stop any shields is not necessary except leave the file system, Web,.
    Operational network (Script and behavior are also recommended in Ver 6 +).

    Prevx - Home - free

    Windows Firewall

    Windows Defender (is not necessary if you use MSE)

    Protected IE - mode

    IE 8 or 9 - SmartScreen filter WE (IE 7 phishing filter)

    I also IE always start with asset if filter InPrivate IE 8.
    (It may temporarily turn off with the little icon to the left of the + bottom
    right of IE)

    Avast - home - free - 7.x stop shields you do not use (except files, Web, network, &)
    Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
    Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
    Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
    disabled - click OK
    http://www.avast.com/free-antivirus-download

    Or use Microsoft Security Essentials - free
    http://www.Microsoft.com/Security_Essentials/

    Prevx works well alongside MSE or Avast

    Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
    programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
    or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp?prevx=Y<-->

    Choice of PCmag editor - Prevx-


    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
    would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
    (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
    never find anything of note that I started to use this configuration.
    http://www.Malwarebytes.org/products/malwarebytes_free

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Error on blue screen during windows startup - LeAPC_INDEX_MISMATCHErreur

    When starting my pc I get a blue error screen saying LeAPC_INDEX_MISMATCHErreur, my pc restarts and I get error when loading of the readers saying: 3rd master ST31000528AS CC38 ultra DMA mode 6 S.M.A.R.T capable but failed the control. 3rd drive hard master S.M.A.R.T command failed, press F1 continue.

    I also have this error report for blue screen event.

    Signature of the problem:
    Problem event name: BlueScreen
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 2057

    More information about the problem:
    BCCode: 1
    BCP1: 85212696
    BCP2: 00000000
    BCP3: 0000FFFE
    BCP4: 00000000
    OS version: 6_0_6002
    Service Pack: 2_0
    Product: 768_1

    Files helping to describe the problem:
    C:\Windows\Minidump\Mini020712-01.dmp
    C:\Users\Kiro\AppData\Local\Temp\WER-278446-0.SysData.XML
    C:\Users\Kiro\AppData\Local\Temp\WER254B.tmp.version.txt

    Read our privacy statement:
      http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

    Is someone can you please tell me what has gone wrong, this has happened more than 3 times now.

    Hello

    What to do if Windows does not start correctly
    http://Windows.Microsoft.com/en-US/Windows-Vista/What-to-do-if-Windows-wont-START-correctly#.

    Pick up the pieces after a computer crash
    http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

    For the methods of troubleshooting blue screen using BlueScreenView and MyEventViewer see my answers
    If this thread - top 3 RESPONSES (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
    for the office or in the Documents folder and download them from there.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    =============================================================

    BCCode: 01 0x00000001

    The most common cause of this Bug_Check is drivers then use the methods in the next message
    updated the BIOS and drivers major. If necessary we can tell you how to run the Verifier however
    with Windows Vista, it's a good idea to update all the main drivers as the maturation process is
    still in force. (See how to update the drivers and run driver verifier in the next message).

    --------------------------------------------------------------------------------------------------------------

    Bug Check 0x1: LeAPC_INDEX_MISMATCHErreur

    LeAPC_INDEX_MISMATCHErreur bug control has a value of 0x00000001. This indicates that there is an inconsistency in the index of State APC.

    Important information if you have received a STOP Code

    If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

    If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

    The following actions could prevent a mistake like this does not happen:

    1. Download and install updates for your computer from Windows Update device drivers.
    2. Scan your computer for computer viruses.
    3. Check your hard drive for errors.

    LeAPC_INDEX_MISMATCHErreur settings

    The following settings are displayed on the blue screen.

    Parameter Description

    1

    The address of the system (system call) function or a worker routine.

    2

    		 The value of the field ApcStateIndex of the current thread.

    3

    The value of the field CombinedApcDisable of the current thread. This field consists of two separate 16-bit fields: (thread-> SpecialApcDisable < 16)=""> wire-> KernelApcDisable.)

    4

    Type (system call 0-, 1 - routine worker) of the call.

    Cause

    The most common cause of this bug check is when a system file or driver has a sequence are mismatched calls to deactivate and reactivate the APCs. The data key item is theThread-> CombinedApcDisable field. The CombinedApcDisable field is composed of two separate 16-bit fields: SpecialApcDisable and KernelApcDisable. A negative value of field indicates that a driver has disabled APC normal or special (respectively) without them the reactivation. A positive value indicates that a pilot has allowed normal TTB or special too many times.

    BCCode: 01 0x00000001<-- read="" this="">
    http://www.faultwire.com/solutions-fatal_error/APC-index-mismatch-0x00000001-* 1016.html

    ====================================================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------
    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do without if needed fail or the Vista DVD or recovery command prompt mode
    Options if your system was installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Recurring blue screen error BCCode: c5 BCP1: 00000000 BCP2: 00000002 BCP3: 00000000 BCP4: 828EE4A2 OS

    Hi all and I want to thank you in advance
    I get this non-stop error and my computer stops and restarts all the hours
    and that's the exact blue screen. I checked against viruses and malware and my laptop is clean, so I don't know what else to do
    Thanks in advance :)

    Signature of the problem:
    Problem event name: BlueScreen
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 4105

    More information about the problem:
    BCCode: c5
    BCP1: 00000000
    BCP2: 00000002
    BCP3: 00000000
    BCP4: 828EC4A2
    OS version: 6_0_6002
    Service Pack: 2_0
    Product: 768_1

    Files helping to describe the problem:
    C:\Windows\Minidump\Mini011012-01.dmp
    C:\Users\Shima\AppData\Local\Temp\WER-62915-0.SysData.XML
    C:\Users\Shima\AppData\Local\Temp\WERD0A6.tmp.version.txt

    Hello

    See this thread for more information on using BlueScreenView, MyEventViewer and other methods of
    Troubleshoot BlueScreens - answers top 3 (+ 1 more).

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
    for the office or in the Documents folder and download them from there.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    ====================================================================

    BCCode: C5 0x000000C5

    This error is most often a driver, thinks the video and other BIOS. Antivirus/antispyware/security
    programs are also suspected.

    BCCode: C5 0x000000C5

    Bug Check 0xC5: DRIVER_CORRUPTED_EXPOOL

    Value of 0x000000C5 DRIVER_CORRUPTED_EXPOOL bug control a. This indicates that the system attempted to access invalid memory at IRQL level too high.

    Important information if you have received a STOP Code

    If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer connect with Support.

    If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

    The following actions could prevent a mistake like this does not happen:

    1. Download and install updates for your computer from Windows Update device drivers.
    2. Scan your computer for computer viruses.
    3. Check your hard drive for errors.

    DRIVER_CORRUPTED_EXPOOL parameters

    The following settings are displayed on the blue screen.

    Parameter Description

    1

    Memory referenced

    2

    IRQL at time of reference

    3

    0: Read

    1: To write

    4

    Memory address

    Cause

    The kernel attempted to access pageable memory (or may be completely invalid memory) when the IRQL was too high. The ultimate cause of this problem is almost certainly a driver that has damaged the system pool.

    In most cases, this bug results if checking a driver corrupts a small amount (less than PAGE_SIZE). Allowances cause more bug check 0xD0 (DRIVER_CORRUPTED_MMPOOL).

    Resolution

    If you have recently installed new software, check if it is properly installed. Check the updated drivers on the manufacturer's website.

    To debug this error, use special pool of driver verifier. Failure to reveal the driver that caused the error, use the global flags utility to enable the special pool by pool tag.

    BCCode: C5 0x000000C5<-- read="" this="">
    * 1198.html http://www.faultwire.com/solutions-fatal_error/A-Device-Driver-has-pool-0x000000c5-

    ==============================================================

    Driver Verifier can help find some BSOD problems:

    Using Driver Verifier to identify issues with Windows drivers for users advanced
    http://support.Microsoft.com/kb/244617

    How to solve the problems of driver in Windows Vista or 7.
    http://www.WinVistaClub.com/T79.html

    Using Driver Verifier
    http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

    How to use Windows drivers check Manager to solve problems and identify the Driver questions
    http://www.YouTube.com/watch?v=_VwIDD9xngM

    Driver Verifier
    http://www.techsupportforum.com/2110308-POST3.html

    Using Driver Verifier
    http://www.faultwire.com/solutions/using_driver_verifier.php

    How to use Windows drivers check Manager to solve problems and identify the Driver questions
    http://www.YouTube.com/watch?v=_VwIDD9xngM

    You can disable the driver verifier
    http://support.Microsoft.com/kb/244617

    Start - type in the box search-> auditor/Reset hit enter to disable

    BlueScreenView lets you know if there is a driver specified in the error message. Also check with
    MyEventViewer at the blue screen.

    If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Help with error on blue screen under Vista 32 bit

    Had this message pop up several times. Any ideas?
    Thank you!
    Signature of the problem:
    Problem event name: BlueScreen
    OS version: 6.0.6000.2.0.0.768.3
    Locale ID: 1033
    More information about the problem:
    BCCode: fe
    BCP1: 00000008
    BCP2: 00000006
    BCP3: 00000001
    BCP4: 867B 9000
    OS version: 6_0_6000
    Service Pack: 0_0
    Product: 768_1
    Files helping to describe the problem:
    C:\Windows\Minidump\Mini122811-01.dmp
    C:\Users\xxx\AppData\Local\Temp\WER-37955-0.SysData.XML
    C:\Users\xxx\AppData\Local\Temp\WERB24D.tmp.version.txt
    Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

    Hello

    Do not forget to check with the manufacturer of system support (or motherboard for custom systems manufacturer)
    and their forums (if any) for known issues.

    Check these KB Articles that "pourraient" apply.

    Stop 0xFE peripheral sleep or Hibernate with USB streaming output
    http://support.Microsoft.com/kb/974303

    "Stop 0x9F" error or "Stop 0xFE" on a Windows 7 or Windows Vista-based computer that
    use some USB AMD EHCI host controllers
    http://support.Microsoft.com/kb/982091

    ==================================================================

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
    for the office or in the Documents folder and download them from there.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive download collected files and after shot/screenshot.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    =============================

    Although the control of bug 0xFE: BUGCODE_USB_DRIVER indicates generally material it could easily
    be a connected USB device and not a system USB device. And you can never really exclude drivers.

    BCCode: FE 0x000000FE<-- read="" this="">
    http://www.faultwire.com/solutions-fatal_error/BUGCODE-USB-driver-0x000000FE-* 1251.html? = date order

    --------------------------------------------------------------------------------------

    A possible cause can be updated to Windows, including pilots. Even the drivers are generally not considered as the
    USB-related, such as video/display, network (NIC & WiFI) and others, may be the cause.

    Especially Norton, Kaspersky, McAfee, SpyBot, Adaware and others may cause or have a role
    in this issue. Try to uninstall it to see if that helps. Use the removal of their creator tools and/or
    Special instructions. (Antivirus/antispyware/security programs)

    ----------------------

    Remove all THE USB devices on the computer. Don't forget to search the drivers updated for all USB
    devices.

    References to Vista also apply to Windows 7.

    Try these to erase corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------

    Then lets refresh the USB stack

    Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
    Devices disabled - look around (with the exception of USB controllers) for all hidden devices / people with disabilities
    (can have zero or more than one) and top - right click UNINSTALL.

    Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
    UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

    This KB shows XP how to and methods of Vista and Windows 7 are the same
    http://support.Microsoft.com/kb/310575

    This is a utility to help you, but do 1 above.

    USBDeview is a small utility that lists all USB devices currently connected to your computer.
    as well as all USB devices that you previously used. Run Options and tick three 1
    are there choices to see if any.

    http://www.NirSoft.NET/utils/usb_devices_view.html

    You must remove all instances of the devices and restart.

    ----------------------------------------------

    If necessary try these two:

    Tips for solving problems of USB devices - and a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

    Hardware devices not detected or not working - Mr. Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    =======================================

    After the above, attach a USB device at a time to see if any cause the issue.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • all the time on vista blue screen - stop 0x7F

    I get this blue screen im on vista please help me
    Signature of the problem:
    Problem event name: BlueScreen
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 2057

    More information about the problem:
    BCCode: 1000007f
    BCP1: 00000008
    BCP2: 80156000
    BCP3: 00000000
    BCP4: 00000000
    OS version: 6_0_6002
    Service Pack: 2_0
    Product: 768_1

    Files helping to describe the problem:
    C:\Windows\Minidump\Mini061811-03.dmp
    C:\Users\dan\AppData\Local\Temp\WER-170437-0.SysData.XML
    C:\Users\dan\AppData\Local\Temp\WER924F.tmp.version.txt

    Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

    Hello

    You have ZoneAlarm or any 3rd party firewall installed? If so, this could be the cause.
    Other antivirus/security programs could be at least partially responsible.

    This fix "could" apply however do not use if you are quite safe.

    Two drivers of platform using WFP (Windows Filtering) causes a computer crash when the
    computer running Windows Vista, Windows 7 or Windows Server 2008
    http://support.Microsoft.com/kb/979278

    Check also:

    The General causes of errors "STOP 0x0000007F" (applies to Vista and Windows 7 as well)
    http://support.Microsoft.com/kb/137539

    ===========================================================

    For the methods of troubleshooting blue screen using BlueScreenView and MyEventViewer see my answers
    If this thread - top 3 RESPONSES (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    ----------------------------------------------------

    BCCode: 0x0000007f with the parameter 00000008 7f usually means a hardware problem.

    Have you added a hardware or drivers updated recently? Check Control Panel - Windows
    Updates to see if all drivers have been updated it just before what is going on has begun.

    For 7f - this could be a problem of material such as uncomfortable cards or memory, while there are
    other causes. Power electric low could also lead to this. Use the troubleshooters above and below
    and when you get to the drivers and memory sections refer to my next message below and then
    return if necessary troubleshooting services

    If a PC remove ALL power. Opening the case, remove and reinstall all memory cards and ALL
    cable (try not just to close) on both ends if they are accessible and on the device ends if not
    (remove the cables and the resettlement of help them to eliminate minor corrosion).

    Notice the 08 (double fault) as 1st parameter means there are likely two causes. Do not forget to update
    your drivers manually as using Windows updates are only certified and Microsoft drivers and
    device manufacturers are far behind in this process. NETWORK, WiFi, BIOS and video/display card update and
    other major engines

    If a laptop or a PC, you will need to take a shop (not BestBuy or other BigBox stores) or your
    Support of the machine system.

    ----------------------------------------------------------------------

    BCCode: 7F 0x0000007F which is the same as 0x1000007F

    UNEXPECTED_KERNEL_MODE_TRAP bug control has a value of 0x0000007F. This bug check indicates that the Intel CPU generated a trap and the kernel could not catch this trap.

    This trap might be a bound trap (a trap the kernel is not allowed to capture) or adouble foul(an error occurred during the processing of an earlier fault, which always results in a failure of the system).

    Parameters

    The first parameter that is displayed on the blue screen indicates the number of trap.

    The most common trap codes are the following:

    • 0x00000000 or division by zero error, indicates that a DIV instruction is executed and the divisor is zero. Memory corruption, other hardware problems or software failures can cause this error.
    • 0 x 00000004, or overflow, occurs when the processor executes a call to an interrupt handler when the overflow (OF) is flag set.
    • 0x00000005, or limits check fault, indicates that the processor, then executing a BOUND instruction, determines that the operand exceeds the specified limits. A BOUND instruction ensures that a signed array index is within a certain range.
    • 0 x 00000006 or Opcode not valid, indicates that the processor attempts to execute an invalid instruction. This error occurs generally when the instruction pointer is corrupted and point to the wrong address. The most common cause of this error is hardware memory corruption.
    • 0x00000008 or Double fault, indicates that an exception occurs during a call to the previous exception handler. In general, two exceptions are handled in series. However, there are several exceptions that cannot be handled serially, and in this case, the processor signals a double fault. There are two common causes of a double fault


    CAUSE

    0x7F bug check occurs after the installation of a faulty or incompatible hardware (including memory) or if installed hardware fails.

    A double fault can occur when the kernel stack overflows. This overflow occurs if multiple drivers are attached to the same battery. For example, if two file system filter drivers are associated to the same stack and then again the recursively of file system, the capacity of the battery.


    Solve the problem

    Troubleshooting: If you have recently added the material to the computer, remove to see if the error recurs. If the hardware failure existing, remove or replace the faulty component. Run the diagnostics of material that does not have the system manufacturer supplies to determine which hardware component.

    The scanner memory is particularly important. Faulty or incompatible memory can cause this bug check. For more information on these procedures, see the manual of your computer. Check that all the cards in the computer are well calibrated. Use an ink eraser or electrical contact treatment, available in electronic supply stores, to ensure the adapter card contacts are clean.

    If the error appears on a newly installed system, check the availability of updates for BIOS, SCSI, or card network controller. These updates are generally available on the Web site or the hardware manufacturer BBS.

    Confirm that all hard drives, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.

    If the error occurred after the installation of a new or updated device driver, you should remove or replace the driver. If, in this circumstance, the error occurs during the startup sequence and the system partition is formatted with NTFS, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console in order to access the file.

    Also to restart your computer and press F8 to character-based menu that displays the choice of operating system. In the menuof Advanced Options , select thelast known good Configuration option. This option is most effective when you add a single driver or service at a time.

    Overclocking (setting of the CPU to run at a speed higher than the nominal specification) can cause this error. If you have overclocked to the computer that is experiencing the error, return the CPU to default clock speed setting.

    Check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error. You can also disable caching memory BIOS to try to resolve the problem.

    If you have encountered this error during the upgrade to a new version of the Windows operating system, the error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version. If possible, remove all third-party device drivers and system services and disable all antivirus before upgrade you. Contact the software manufacturer for updates of these tools. Also, make sure that you have installed the latest Windows Service Pack.

    Finally, if all of the steps above do not resolve the error, take the system motherboard to a repair for the diagnostic facility. A crack, a scratched trace, or a defective component on the motherboard can also cause this error.

    BCCode: 7F 0x0000007F which is the same as 0x1000007F<-- read="" this="">
    * 1304.html http://www.faultwire.com/solutions-fatal_error/Run-a-System-diagnostic-Utility-supplied-by-your-0x1000007F-

    ==================================================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------
    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do without if needed fail or the Vista DVD or recovery command prompt mode
    Options if your system was installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

Maybe you are looking for