Profile on the screens non-designer fields

Similar Questions

• Locking the screen 'None '.

  Hey... I can't change the screen to zero lock. At the beginning I didn't change because I like it like that... But after I changed the profile of comments (accidentally typed it because im curious), locking the screen automatically changes to drag... Now, I can't change it because in the security settings, it has no option to put nothing, he just slide, PIN, model and password

  The Tablet is nuber Acer Iconia One 7 (the one with the lowest camera) model is B1-770

  You must remove the user invited to select none on screenlock

  https://support.Google.com/nexus/answer/6115141?hl=en

  If you are not able to remove the guest user, backup your data and do a factory reset:

  backup of the settings / & reset - Reset data

• My lap top won't go on, but the screen is a field of colored lines

  When I turn on the laptop, nothing appears on the screen but the color of the horizontal lines. What's wrong?

  Hi swaki. I understand that you get nothing else from the colored lines. Looks like you have a hardware failure.
  Depending on which product you have, you may be able to remove the battery and power to try to reset.
  If it continues, you can contact the phone holder to talk about your repair options:

  In North America: 800-474-6836
  Outside North America, you can find the number here: Contact HP

  I hope this helps.

• Not pushing the screens and camera 8900

  Im having two problems in my code...

  the first don't push a screen in a menu. What of weird, is that I have two other options on the menu that will push the screens.

  Here is the code:

  private _server MenuItem = new MenuItem ("Server", 110,
  30 k
  {
  public void run()
  {
  UiApplication.getUiApplication () .pushScreen (new Server());
                  
  }
  };

  the second problem is very similar... but it's the camera of 8900 dreaded

  SerializableAttribute public class CameraScreen extends form {}
      
  private photMan PhotoManager = new PhotoManager();
      
  private VideoControl _vidcon;
  Player;
  _videofield of private sector;
      
  private String image_Type = "encoding = jpeg & width = 2048 & height = 1536 & quality = very good;
  private byte [] image_Array;

  Phto of photos;
   
  CameraScreen _camScreen;
      
  VerticalFieldManager _vfm = new VerticalFieldManager (VerticalFieldManager.USE_ALL_HEIGHT |) VerticalFieldManager.USE_ALL_WIDTH)
  {public void paint (Graphics graphics)
  {
  graphics.setBackgroundColor (0x00BDC29A); / / Gray special
  Graphics.Clear;
  Super.Paint (Graphics);
  }};
      
      
  Private UiApplication UiApp;
      
  CameraScreen (Photos pht) {}

  Games of skill to the singleton
  photMan = PhotoManager.getInstance ();

  UiApp = UiApplication.getUiApplication ();
  Photo gets assigned locally and assigns him photomanager
  This.PHTO = pht;
  photMan.setPhoto (phto);
  make easy pop screen
  _camScreen = this;
              
  Add the player to the screen to be used
  _vfm. Add (_videofield);
          
      
  This starts the camara media feature
          
          
  CreateCamera();
  try {}
  Player.Start ();
  } catch (MediaException e) {}
  Dialog.Alert ("Err:" + e);
  }
          
          
  Dialog.Alert ("Press Enter to take photo");
  }

  It takes the photo and shows a preview
      
  Public Sub takePicture()
  {
  Dialog.Alert ("what happens");
  try {}
  photMan.setImageData (_vidcon.getSnapshot (image_Type));
  Dialog.Alert ("inside the test');
  } catch (MediaException e) {};
                             
             
  Dialog.Alert ("just before the next screen push");
  UiApp.pushScreen (new CamPreviewScreen (_camScreen));
          
      
  }

  Public Sub CreateCamera()
  {
  try {}
  Reader = Manager.createPlayer ("capture://video");
  Player.Realize ();
              
  _vidcon = (VideoControl) player.getControl ("alarm");
              
  If (_vidcon! = null)
  {
  _videofield = _vidcon.initDisplayMode (Field) (VideoControl.USE_GUI_PRIMITIVE, 'net.rim.device.api.ui.Field');
  _vidcon.setDisplayFullScreen (true);
  _vidcon.setVisible (true);
  }
  Add (_videofield);
              
              
              
          
  } catch (Exception e) {}
                  
  Dialog.Alert("E:"+e);
  }
  }

  -------------------------------------------------------------

  I use a headset button to access the feature, and I know that the function is called... This works also in the Simulator, but not in the device...

  Any help would be appreciated...

  This is random... but I solved the problem of 8900. Also, it happened to me when I was with the InvokeCamera App. The solution to get the CameraDemo to work is to make sure you build the program is less than or equal to the JDE version JDE on the phone

  Example:

  Compile the JDE 4.6.0 (computer)

  Work on 4.6.1 (phone)

  Compile the JDE 5.0.0 (computer)

  Does not work on 4.6.1 (phone)

  Just make sure that you compile the .cod with the correct version of the SDK and you wil have no problem. Hope this can help some people.

  Note: You will still need to clear the screen of all fields except for the videoField to do, this includes the setTitle()...

• Non editable field change to highlight the problem

  Hi all

  I have an edit non editable field in my screen. In order to make the difference between editable and non editable field, I put the bottom of the field cannot be changed to light gray as in the code below:

     Border nonEditableBorder=BorderFactory.createRoundedBorder(new XYEdges(5, 5, 5, 5),Color.LIGHTGRAY,Border.STYLE_FILLED|Border.STYLE_TRANSPARENT);
  EditField textField=new EditField(EditField.NO_NEWLINE|EditField.FOCUSABLE|DrawStyle.RIGHT);
  textField.setBorder(nonEditableBorder);
  

  Now the field cannot be changed when I scroll the wheel to the right or left the text gets highlighted in white as shown in the image below:

  

  I don't want the text to highlight. Can anyone help me please with this. Thanks in advance.

  Kind regards

  S.A.Norton Stanley

  Hello

  Thank you. Overridding method drawFocus() and nothing doing, emphasis has been disabled on the fields and the white highlight was not. But once I reached the first or the last field of the white selection screen gets drawn again.  But the border I also assign the background of the field edit as shown below, and this solved my problem.

  Background bgNonEditable = BackgroundFactory.createSolidBackground(Color.LIGHTGRAY);
  textField.setBackground(bgNonEditable);
  

• Confirming a design where I need to save where the user navigated to the screen.

  A matter of design, which is a good implementation of the following?

  I need to be able to save the location of the place where the user has scrolled, then when the user:

  1. Changing screens and returns to the previous screen.
  2. The application farm (moves the application at bottom) and opens the app again (move the app in the foreground).

  The user scrolls automatically here where the user was before.

  For example, if I have a VerticalFieldManager with the following text read only fields:

  • LabelField
  • LabelField
  • LabelField
  • LabelField
  • LabelField
  • ButtonField

  The user scroll down to the third LabelField — two actions user above performs, returns to the screen, and scrolls down to the third TextField again.

  Is the hardest part, I can't count on own dirty, muddy, or fields because it is read only the data and a ButtonField.

  I can't use Manager.setFocus because the fields have an accent.

  I think I can use Manager.setHorizontalScroll and Manager.getHorizontalScroll, but is there a better way?

  Not sure that your arguments to change my suggestion.

  "The user must be able to close the application."

  If they close the applciation that they lose their position.  It happens in most of the applications.  Browsers do not open up on top of the page you were viewing when you close, for example.

  "The user must be able to request the application thoroughly using the end key of red color"

  You will not be able to stop this.  It will just happen.  Nothing for you to do.

  "This is a pile of high display a screen where the Menu button is the main navigation.".

  This does not preclude that I proposed either possible.  If you pop a screen and then later push it, my understanding (and experience) are that he's going to be redisplayed as it was when you jump it.  The screens are objects, they don't stop screens just because they aren't on the stack of the screen.

  Also, I see no problem in what you descrtibed for a touchscreen device.

• Dimensions/fields displayed on drill holes in the screen

  Is there a way to display other dimensions/fields on the screen in which you load in the system target to break through?
  
  To develop, suppose I have an import file that I have the following fields: entity, account, Department, affiliation and amount. My metadata on the target system has a home for all fields except dept because we do not load Dept. So I go ahead and I created my import format to capture all fields except dept that I don't shoot in because I'm used to load it. I load my data and now I break my target system (click on $1000) and FDM launches and I click on the initial screen that shows $1000 and it opens two lines that make up the $1000. On this screen, however, I see only the dimensions/fields I have loaded: entity, account, account Description, quantity. I won't see Dept because I do not have it as I'm not loading it. I know that I can include Dept in the Format of import as an attribute and click the amount to show attributes but is it possible to have it on the screen? In other words, I want to make in the field but I don't want to load on the target system so it shows up on the drill through the screen?
  
  Sincerest apologies if I do a bad job to articulate the question.

  Hello

  Unfortunately there is no way to change the design that you see during the Drillback.

  The displayed dimensions are controlled by the dimensions which are loaded into the target system. Given that the target system does not these dimensions, it is not displayed when drillback.

  Thank you

• validation working is not to count the non-null fields

  I have six fields on the screen, I want to check that at least 3 of them are filled (3)...
  I created a validation as follows to count the non-null fields... but it's not working...
  Please help solve this problem or recommend a better way to do this...
  
  
  declare
  number of question_count;
  Start
  question_count: = 0;
  If: p1_t_question_1 is null then
  null;
  on the other
  question_count: =: question_count + 1;
  end if;
  If: p1_t_question_2 is null then
  null;
  on the other
  question_count: =: question_count + 1;
  end if;
  If: p1_t_question_3 is null then
  null;
  on the other
  question_count: =: question_count + 1;
  end if;
  If: p1_t_question_4 is null then
  null;
  on the other
  question_count: =: question_count + 1;
  end if;
  If: p1_t_question_6 is null then
  null;
  on the other
  question_count: =: question_count + 1;
  end if;
  If: p1_t_question_6 is null then
  null;
  on the other
  question_count: =: question_count + 1;
  end if;
  
  If: question_count > 2 then return false;
  otherwise returns true;
  end if;
  end;

  I'll take a look a bit.
  In the meantime, check if the code as

  If the trim (both '%' from: p1_question_with_nul') = 'null '.

  help

  Ok. Take a look now. I used the function TRIM as shown above and also changed the comparison for questions 3 text based on ' if: p1_question_with_text is null'

  Seems to work now

  CITY

  Published by: city has 23 October 2009 05:26

• iPod stopped playing in the middle of a song. The screen still shows the song. None of the buttons work. Cannot close the iPod is facing down. How can I fix it?

  my iPod, the generation classic 32 GB, stopped playing in the middle of a song. The screen is stuck on this song. None of the buttons work.  I can't stop the iPod.  How can I fix it?

  Hi, lesliefromhowell!

  Thank you for reaching out by Apple Support communities. After reading your post, I understand that your iPod Classic does not. I count on my iPod for music on the go and want to make sure that you can use your own without problem!

  Relying on the buttons have not helped get the iPod to start playing or to restart, please follow the steps outlined in the article below to reset your iPod.

  Learn how to reset your iPod

  You'll want to use the instructions under the "iPod, iPod (scroll wheel), iPod (touch wheel), and iPod (dock connector)" section. These instructions are the following:

  iPod, iPod (scroll wheel), iPod (touch wheel), and iPod (dock connector)

  To reset your iPod, follow these steps:

  1. Slide the Hold switch to the locked position and then come back!
  2. Hold down Menu and Play/Pause all buttons until you see the logo Apple/iPod (about 6-8 seconds). You may need to repeat this step.

  If you can always reset your iPod, follow these steps:

  1. Connect your iPod to a power adapter and plug the adapter into a power outlet.
     You can also connect your iPod to your computer. Make sure that the computer is on and that it is not set to go to sleep.
  2. Try resetting your iPod again.

  Good listening!

• How to add several presets in a reactive mode design without having to resize the screen every time

  I want to be able to add several screen size presets with the ability to view sensitive design but do not want to resize the screen and add each individually through the predefined custom function.

  Have you seen some messages on the internet (http://g-liu.com/blog/2013/08/firefox-rdm-presets/) who say it can be done, but could not find where the config is required to worm 26.0?

  Hello

  Work now how to do this. You first create an entry called "devtools.responsive.UI.presets" in the configuration file, and then add in the predefined string:

  If the steps are:

  (1) open a new tab in Firefox or window and enter about: config

  (2) (if a warning message appears, click OK.)

  (3) create a new entry devtools.responsive.UI.presets - right click and select 'new', then 'string' - under enter the preference name of the type "devtools.responsive.UI.presets" and then click OK. When the box of the input string appears simply add the following shows

  [{"key": "CGA: 320 x 200", "width": 320, "height": 200}, {"key": "QVGA: 320 x 240", "width": 320, "height": 240}, {"key": "CIF: 352 x 288", "width": 352, "height": 288}, {"key": "SIF: 384 x 288", "width": 384, "height": 288}, {"key": "HVGA: 480 x 320", "width": 480, "height": 320}, {"key": "(NTSC) VGA: 640 x 480", "width": 640, "height": 480}, {"key": "PAL: 768 x 576", "width": 768, "height": 576}, {"key": "WVGA: 800 x 480", "width": 800, "height": 480}, {"key": "SVGA: 800 x 600", "width"}] {: 800, "height": 600}, {"key": "WVGA (NTSC): 854 x 480", "width": 854, "height": 480}, {"key": "PAL: 1024 x 576", "width": 1024, "height": 576}, {"key": "WSVGA", "width": 1024, "height": 600}, {"key": "XGA: 1024 x 768", "width": 1024, "height": 768}, {"key": "1152 x 768", "width": 1152, "height": 768}, {"key": "XGA: 1152 x 864", "width": 1152, "height": 864}, {"key": "WXGA: 1280 x 600", "width": 1280, "height": 600}, {"key": "HD 720: 1280 x 720", "width": 1280, "height": 720}, {"key": "WXGA} {: 1280 x 768 ","width": 1280,"height": 768}, {"key":" WXGA: 1280 x 800 ","width": 1280,"height": 800}, {"key":" SXGA: 1280 x 1024 ","width": 1280,"height": 1024}, {"key":" 980 x 1280 ","width": 980,"height": 1280}, {"key":" Microsoft Surface RT: 320 x 240 ","width": 1366,"height": 768}, {"key":" 1400 x 900 ","width": 1400,"height": 900}, {"key":" 1400 x 960 ","width": 1400,"height": 960}, {"key":" SXGA +: 1400 x 1050 ","width": 1400,"height": 1050}, {"key":" 1400 x 1080 ","width": 1400,"height": 1080}, {"key":"1600 x 900"} {, "width": 1600, "height": 900}, {"key": "UXGA: 1600 x 1200", "width": 1600, "height": 1200}, {"key": "WSXGA +: 1680 x 1050", "width": 1680, "height": 1050}, {"key": "1920 x 900", "width": 1920, "height": 900}, {"key": "HD 1080: 1920 x 1080", "width": 1920, "height": 1080}, {"key": "WUXGA: 1920 x 1200", "width": 1920, "height": 1200}, {"key": "2K: 2048 x 1080", "width": 2048, "height": 1080}, {"key": "QXGA: 2048 x 1536", "width": 2048, "height": 1536}, {"key": "WQHD: 2560 x 1440", "width": 2560, "height": 1440}, {"key" {: "WQXGA: 2560 x 1600", "width": 2560, 'height': 1600}, {'key': "QSXGA: 2560 x 2048", "width": 2560, 'height': 2048 '}, {'key': "2160 p: 3840 x 2160", "width": 3840, 'height': 2160 '}, {'key': "4 k: 4096 x 2160", "width": 4096, 'height': 2160 '}, {'key': "4320 p: 7680 x 4320", "width": 7680, 'height': 4320 "}, {'key':" 8 k: 8192 x 4608 ","width": 8192, 'height': 4608 '}, {'key':" 8640 p: 15360 x 8340 ""} [{, "width": 15360, 'height': 8640}]

  then click OK

  All new presets should now be sensitive design mode.

  Worked for me!

• Dead zone near the top of the screen in Safari? Cannot use Safari to log even here, because the arear connection is at the top. Virtually all nearthe fields are dead. I have no problem going into the fields to halfway to the bottom of the screen. Chrome w

  Dead zone near the top of the screen in Safari? Cannot use Safari to log even here, because the login box is at the top. Virtually all of the fields near the top are dead. I have no problem going into the fields to halfway to the bottom of the screen. It comes to Chrome and it works very well.

  I suggest you only begin by taking the measures recommended in this support article.

• Help urgently needed! -User profile takes a long time to load and the rest of the screen with the message "Please wait loading profile service user.

  Hello

  Every time that connect us to servers of TS farm, the profile of the user load for a long time and she stays with a message "Please wait for the user profile service" for longer than 5-6 minutes. We work in two areas which is configured as "an endorsement of forest transitive way." The domain (domain A) with TS farms hence connect us a cross forest profile disabled so we cannot load the roaming profile in this area, whereas another domain (domain B) roaming profile user's roaming profile.

  Also in the directory the Active directory of the domain B, TS/RDS settings is enabled for the problematic profile.

  TS / RDS--> roaming profile path and TS home folder is configured. TS/RDS settings is configured because we use other farms of machines/TS citrix other than the one in which there is problem.

  When disable us TS/RDS of the directory settings active directory domain B, then it is extracted to improvement in time. But we're in a situation were we cannot disable TS/RDS settings as we use other Citrix machines also. So we tried configuration GPO in A TS domain as

  Which allows to "allow only the local user profile".

  Allowing 'profiles itinerant Prevent password propagation to the server.

  This allows to "Allow asynchronous user group policy processing when you connect via Terminal Server Services"

  But still, there is no improvement in the time taken by the server to connect. What is the adjustment to make in the field of A TS, such that he will not try to charge the roaming of the B domain user profile, even if TS/RDS settings for the user profile are configured?

  Forums of evil: you want to Technet forums.  It's more domestic consumption...

  https://social.technet.Microsoft.com/forums/

• When I start first the computer, the screen opens it is what I get "hardware profile/Configuration Recovery Menu. What can I do to get rid of this pop up?

  When I start the computer first, the screen opens with this: "recovery Menu Profile / Hardware Configuration.  This pop up screen has never done this before.  Why this is happening, and how do I get rid of him.

  Hi willfeeney,

  ·         Are you still facing the issue?

  Let us know the status of the issue.

• Unable to connect to my profile at the start, the SCREENS ' SAYS the PROFILE SERVICE does NOT have the USER logon

  "Unable to connect to my profile when starting, SCREENS SAYS'THE PROFILE SERVICE does NOT have the USER logon"

  Profile of user could not be added

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• How can I get rid of non-existent drive (local disk Q :) that is displayed on the screen of my computer?

  original title: How do I get rid of non-existent hard disk that appears on my computer screen?

  I have a local disk (q) that loads automatically on my folder "Computer" [the folder that shows all hard drives and peripheral storage removable]. The drive does not exist and when I double click above it says "Q:\\ is not accessible access is denied." I unplugged my external hard drives, and these drives disappear from the screen by this disc remains still.  How can I get rid of him?

  I found an article from third party in which people have found a solution:

  Hide the Local disk (q) added by Office 2010 Beta

  I hope this helps! (you can back up the registry first)

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.