Program crashes when rendering project

Similar Questions

• My Muse program crashes when I am trying to download on my FTP host.

  My Muse program crashes when I am trying to download on my FTP host. I get this message:

  

  In the long term you would be well served to check the size of the active associated files and manually download all that are greater than 10 or 20 MB by using a program FTP. If this isn't the case, you will meet this next time that there is a need for a complete re-re-export/upload to your site.

• Error message: Windows Movie Maker program crashes when scanning film auto

  When I try to create an automatic video, film imports, but to the point at which the film is created, the program crashes, Windows looking for a solution, the program opens again and I get a message that a problem that caused Windows to stop working. Note: Windows does not crash; the movie maker does. Then the suggested solution is to download updates for Windows, but there is no update needed.

  The entire message is:

  Product

  Windows Movie Maker

  Problem

  Stopped working

  Date

  25/09/2010 10:43

  Status

  Solution available

  Signature of the problem

  Additional information about the problem

   

  Help!

  Bucket ID: 2037677096

  Problem event name: APPCRASH

  Application name: MOVIEMK.exe

  Application version: 6.0.6001.18494

  Application timestamp: 4c1a43fb

  Fault Module name: FlipDSVideoDecoder.ax

  Fault Module Version: 1.0.0.0

  Timestamp of Module error: 4c78442b

  Exception code: c0000005

  Exception offset: 00008f46

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 1033

  Additional information 1: fd00

  More information 2: ea6f5fe8924aaa756324d57f87834160

  Additional information 3: fd00

  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  Well, I was very happy when the program doesn't stop after following your advice and unchecking above named filter. But then, after it scans the file (which is a progress!), he says he cannot continue because one or more of the files contains a codec that is not supported by AutoMovie. I don't even know what a codec IS. I know who was Kojak, and I know what is Kotex, but what the heck is a codec and how do I get one?

  Thank you!

  ==================================
  Maybe the following article offers some ideas:

  "What exactly is"Codec"and why would I ever need it?
  http://netforbeginners.about.com/od/multimedia/f/codec.htm

  It is difficult to know what codec, you may need to because it
  is based on the format of your source files. And it is possible
  You may have some compatibility issues with one or more
  source files.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, wmv

  It may be interesting to try to download and install a codec pack...

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  * Proceed at your own risk *.

  K - Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/ (the name of the file that you download is:)
  "K Lite_Codec_Pack_640_Full.exe")

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Applications and programs crash when open file Explorer

  My programs and applications are blocking as soon as I open Explorer file (I use windows 8).  For example, when I go to attach a file to an e-mail, the Web browser crashes.  Also, when I go on ' Save as ' in microsoft office, word/excel crashes too.

  So far, I have:

  -Updated and rebooted

  -virus research (clear)

  -Startup in safe mode - safe mode will not allow not even me open microsoft word, and the problem persists when you use gmail via google chrome

  -re-installed office - no change

  What could I do next?  The computer was perfect up to this problem that began a couple of weeks.

  Help, please!

  Thank you

  Cara

  Hello Cara,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. You did changes to the computer before this problem?
  2. You get an error message when the applications or programs crash?

  The question could arise due to corruption in specific applications or due to file system corruption directly affecting the launch programs. In order to diagnose and resolve the issue, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Run the Troubleshooter of Apps and check if that helps.

  The Apps store is an automated tool that we have developed to deal with a number of known issues that may prevent applications from running correctly. This troubleshooting automatically solves some issues including the suboptimal screen resolution, incorrect security or account etc. settings. If the problem persists, refer to the remaining steps in the help article and check.

  Solve problems with a soft

  If the problem persists, try the following method.

  Method 2:

  Try to run a scan of the file system (CFS) auditor to check corruption of system files in the system. SFC scan will search for system files corrupted on the computer and fix them.

  1. Press the Windows key + X, click prompt (Admin).
  2. In the command prompt, type the following command and press ENTER:
     sfc/scannow

  For more information, refer to this link:

  Use the System File Checker tool to repair missing or corrupted system files

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Adobe first CC - crash when rendering, playback - just updated to CS6 - please help

  Mac 10.9.5 Adobe first CC - crashing when made during playback - just updated to CS6 - please help

  Hi all

  I've just updated CS6 CC. I uninstalled everything first, cleaned computer and then installed CC.

  Just starting a project, play with the first. As soon as I visited or try to read with simple changes (transitions, cuts) first "encounter a serious problem" and must stop immediately.

  Any suggestions? Help, please

  Hi Henry,.

  • From there: first Pro CC, CC 2014, 20141 freeze at startup or crashing everything working (Mac OS X 10.9 and later)
  • Run a repair of Permission to drive on your computer once and restart the computer.

  Thank you

  Regalo

• Program crashes when you click Preferences

  I installed Lighroom. Everything works well except preferences. The moment where I have click on Preferences the program crashes. I removed, restarted and re installed. Still the same problem. Please notify

  Lightroom crashes when opening preferences | Windows

• LR 2.3 crashes when rendering previews over large/standard

  After the update to LR 2.3, I had a problem in the library - view Magnifier Module when the program crashes with the message "Make a larger preview" on the screen.  The Preview on the screen turns roughly pixelated one or two seconds after the message appears and then it just hangs there.

  Sometimes I can go to another photo without problem, sometimes not.  If I exit LR and back photo of the problem may be OK but then if I find a little more the problem come back again.

  I threw all my 1:1 previews and tried to make the Standard previews (were 1440 p & tried to 2048) but he just came with the bar 'Made the Standard previews' progress and went nowhere - had running for 12 hours in the day – nothing.

  I'm running a Core 2 Quad 2.33 GHz 4 GB RAM Duo processor, Nvidia GeForce 9600GT graphics card running the latest driver.

  Help!

  Andrew

  I take some time - as at the end of your day, and delete the entire folder Previews. It will be rebuilt, and you might want to have create previews minimum or standard (depending on what kind of dialogue you are in.) You can, of course, create 1:1 on request later. It will take a long time, but it can solve this problem, except if you find that it is entirely solved by a Permissions fix.

• The program crashes when I select a movie in the project Panel

  Today, it was not possible to take a photo/film or text in the timeline.

  The program has stopped working.

  I tried to change the management of the memory of the memory or Performance without result.

  PremierePro works more as soon as I select a file in the project Panel.

  Would it have happened after the last update?

  / Hjalmar

  The problem is resolved.

  I created a new sequence and copied all the items in the sequence of old in the new sequence.

  Then I deleted the old sequence. He now works to add new clips.

  I have no idea why this is so.

• Premiere Pro CC 2014 crashes when loading project file

  Hi guys, any help on this is much appreciated because I have a job due in 18 hours and I'm in big trouble, if I can't solve this problem.

  I was editing a project in Adobe Premiere Pro CC 2014 (update to the latest version) and when I tried to access the same file today it gives me the error message:

  ' Sorry, a serious error has occurred which requires Adobe Premiere Pro stop. We will try to save your current project. »

  I saved the other version files and they all seem to be working properly so I know this isn't my HD which is corrupt. In fact, my suspicion is that it has something to do with a blur effect that I use. The only problem is, I can still access the file to remove the effect that the project file does not open.

  

  Information on my computer:

  I use a Macbook Pro

  OS X version 10.9.4

  2.6 Ghz Intel Core i5

  16 GB 1600 MHz DDR3 memory

  Any suggestions or comments would be appreciated.

  Guys I solved my problem - thought I'd share with you how in case no matter who else has this problem.

  I came across this thread

  First Pro CC error and crashed

  who was the suggestion -

  "Always do have after effects installed? If so, please try to import the main sequence into it and then export it as first project pro ootion file/export and then try to open in first pro. »

  This has not worked for me also, but I did try and import my existing project into a new project and copy all the files. Works fine now.

  I don't know if I'm having the same problem again tomorrow, so I'm going for rendering on a super high resolution video before I finish first in case where

• AE crashes when loading project "occurred. invoking the plug-in"stabilizer Warp"effect Details.

  Start with my PC Info:

  

  and a few details:

  

  So I tied first Pro cs6 in after composition affects CS6. Last night, I was working on it, everything was fine, I exported a test copy and that worked, everything was great for the night and I saved and closed. Tried to re - open the project this morning in Premier Pro and it would not load, so I opened after affects and I get the following error messages. I am able to load other projects successfully, and I do not to move any assets after that I closed last night programs. I tried to restart and reload several times and I get the same error messages constantly. I sought advice for similar problems and found some possible solutions #1 'use capslock at the opening of the modernization project to delete. Then re - make the effects that are causing problems. I tried this and it doesn't seem to work, but I can't have done it correctly, I simply pressed caps lock shift and made sure it's on when I clicked on the project to load, however I got the same errors. #2 delete the cache for the project and the new rendering. I can't locate the files in cache for this project in the affects on the record, is this referring to the cache files in Premiere Pro? I admit I'm a little afraid to do...

  \

  

  How would you recommend all that I proceed? I am entirely willing to add a link to files or do anything that needs to be done. I'm also curious of what happened... If I can avoid it in the future.

  The after effects CC (12,2) update corrects a cause of an accident involving the effect of auto contrast, auto levels effect and the related effects.

  Let us know how it works for you after installing the update.

• Error and crashed when rendering

  Whenever I try to make a video with a specific project, I get an error and crashes and then to After Effects. The number of "last login message" changes every time, but the error < BEEp_InitSoundPB > < 0 > remains the same. I get the error message in seemingly random places during rendering (I tried made with different parameters) and is followed by a another message that says I have crashed and I can save my file.

  

  

  • I use After Effects CS6 11.0.2.12 on a Win7 x 64 SP1.
  • The source of the layer footage are pictures and generated by the solid AE only.
  • I've never encountered this error, I searched and found nothing useful, and he came for what seems like no reason - I was not something out of the ordinary when first rendering failed.
  • I have Quicktime 7.7.3
  • The only plugins I have are defined VideoCopilot jerk and makes with and without him still fails.
  • My computer has an AMD Athlon (TM) II X 4 635 processor (4 CPUs), ~2.9GHz with 6 GB of RAM and an ATI Radeon HD 5450 video card.
  • The problem occurs only in the final; There is no problem with RAM Preview.
  • I don't think I'm using features OpenGL or made multiple images at the same time as multiprocessing.

  Thanks for the help!

  Replace the MP3 with a WAV file and rinse the MediaCache in the prefs, then try again. Seems you've introduced adio compliant flakey (CFA) of the files in the cache due to the use of a not so perfect MP3...

  Mylenium

• Before 4 opens and then crashes when loading project

  I realize that first Elements 4 is old, but I still love and use it for all my projects. Here's my problem: I've been running for 4 months on my new laptop for Win 7 HP 64 - bit, but only today it started to go bonkers. It opens fine, but when I open a project, it minimizes the window pre as soon as it loads. Even if I tried to re-opening the window, he refuses to return to full screen mode.

  I tried the Vista compatibility and even XP, which runs under administrator privileges, but nothing helped. It is the result of a virus or a newly installed program? I return to the edition...

  Thanks for the info.

  There is one thing I need to clarify-do you mean that you can no longer open a new project, one that is empty? If Yes, then you can skip the test below, well we could get back to that, if we can get before you open a new project.

  When you say "raw AVI files", these are DV - AVI, a special form of AVI? This ARTICLE will give you more information about the file formats.

  You mention Audio WMA files. As an AVI file, those can contain a lot of different things, but more on that in a moment.

  With Win7-64, 4 GB of RAM is all that Win7 should work, and leaving not a lot of excess for the programs.

  Now, the projects may become corrupt or unstable, because of many things. Active in a project can become a problem. Test a project for the 'bad' assets is to ensure that the pre is closed and then 'hide' the assets of pre. As the project file, of PREL, contains none of the assets, but only following absolute paths for these assets, it's farily simple. How they structured their active records can greatly simplify this task, or cause a bit of work. It sounds as if your project is pretty simple so far and should not be difficult to follow these steps to test:

  • With the pre is closed, go to or records, where the assets are located and move the folders elsewhere. Don't forget, the PREL uses absolute paths, so that this original path no longer apply. At this point, I also would separate active by type, say with video files in a folder 'Video', still Images in a folder "Images" and the Audio files in a folder "Audio". You'll see why in a moment.
  • Before starting, and then open the project problem.
  • We will be faced with a message dialog box, asking "where is file _? Since we moved these assets, we must help the PrE to find them. Simply navigate to the proposed folder, where the first asset. The display of the dialog box offers a Finder, but since you have moved things, you should have this info. Locate the first file, claiming before.
  • Once you find it, pre will do two things: make the connection again and then look in the folder for other assets, used in this project and also a link to them - pretty neat, huh?
  • Given that we have separated our assets by type, if the first type, say video, very well, that we can exclude those charges. If the project crashes here, we found at least one problem.
  • When meadow comes to the following assets, reappears on the screen of the dialog box, and we will do the same thing: find the file, claiming before, and again, pre will restore the link with it and this search for the active folder. If all goes well, we can probably exclude those assets as a problem.
  • He repeats until either the project managers, or until project accidents, or crashes. If this happens, we reduced things down to a single type of assets. That's why we separated - it's active troubleshooting much easier. Note: Titles are written in XML, in the PREL code, so nothing concrete there for them at this stage.

  Whatever you do, don't choose NOT save, and especially if you decide to Skip Media, or cancel. Only do a Save_As, so to NOT overwrite your original PREL. Never overwrite original PREL, if you are having problems.

  Please report it on this test. The project fails with a specific type? If Yes, what is this type of assets?

  If you have a certain asset of this type, you can redo the test, moving, say half of these goods again and rerun the test. If the project crashes with either the first half or the second, you are closer.

  Good luck

  Hunt

• Lightroom 5 - the program crashes when I try to add folders

  When I try to 'add files' to Lightroom (add folders, which means add photo files to change).  We get an error that says: "Adobe Photoshop Lightroom 64-bit has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program... "I have a lot of hard disk space.  My catalog is about 85 000 photos now, but remove the photographs does not seem to make a difference.  Help, please!

  Hi parrishphotographybap,

  Please make sure the Lightroom update to the latest version of 5.71, also to join the crush of Event Viewer log.

  How to check the event viewer:Photoshop Elements Editor Help. How to find the crash logs on to Windows

  Concerning

  Tanuj

• RoboHelp 6.0 crashes when opening projects RH X 5

  Our company has just 'upgraded' RoboHelp X 5 to 6.0. We had any other problems with this new version. Some of our X 5 projects we can open, some of them we cannot. When we try to open some of our X 5 projects, the RoboHelp application crashes. We tried to remove the PCD files, etc and nothing seems to work but the removal of the index (file perfect). But then we have no clue. Even if we create a new index from scratch, then as soon as we open it next time, it crashes again. Worse, is that I talked to technical support of Adobe and assistance to installation about 20 times in the course of the last month and a half, and they were absolutely worthless! They also keep promising to call us back by promised time and it NEVER happens. Our company ordered 10 licenses for RoboHelp 6.0 and NONE of them are working properly AND the results of our projects varies according to each user. We receive all the mistakes and errors vary between our users. This product is NOT GOOD and we would NOT recommend it to anyone. Adobe needs serious improvements to their 6.0 product AND their support teams! We will spread the word to all blogs by Adobe, that we can find because they will not help us or until they help us.

  In collaboration with the team my BUSINESS, we have solved this problem on my machine by reinstalling Microsoft Windows. However, there are 2 others in my Department who encounter the same problem and they are going to be reinstalling Windows XP as well.

  We have not found the real problem with Adobe 6 X 5 vs. Our resolution seems to be a workaround.

  I spent way too much time on this problem. I'm happy with OUR team could help.

  Still not impressed with Adobe 60 or their "customer service."

• Program crashes when you try to uninstall

  I have Vista o/s.  I'm trying to uninstall a program, however, he is suspended and will not perform the uninstall.  When I try to uninstall another program it won't let me because it is waiting for the first uninstall successful. How can I get the first program out of the queue?

  Hello

  It is always helpful if you give the name of the program problem

  as you say not to try this free program to delete or ask the manufacturer programs

  http://www.revouninstaller.com/revo_uninstaller_free_download.html