Programs Adobe CC freeze after a few hours of idling

Similar Questions

• 360 13 inches x spectrum: spectrum x 360 8.1 Windows stops to get into sleep after a few hours

  My x 360 spectrum stops to get into sleep after a few hours of normal behavior.  In other words, when the computer is started first, he put on standby and Hibernate mode then normally after the specified idle period.  It can then be woken up and work normally and then to go back to sleep after inactivity - during a few hours.  It stops working after the computer has been for a few hours.  I don't know exactly how much time must be in place before this problem starts, but once it ceases to be able to sleep, the only way to solve the problem is to reboot the system.  Once the problem occurs, the computer turns off the screen but that's it.  He will sleep if I do it manually by pressing the button of power or a click on the Windows button and forcing them to sleep or hibernation.

  I watched powercfg /requests and there is nothing listed that could prevent sleep.  I ran also report with fluo compact powercfg and it also does not list something that prevents apparent sleep.

  NOTE: The energy report is also EVEN if the system still works correctly.

  I could use help to determine what is the cause of this condition.

  Thank you.  See below for diagnostic information:

  Here is the result of the /requests powercfg command:

  C:\Windows\System32>Powercfg /requests
  DISPLAY:
  None.
  
  SYSTEM:
  None.
  
  AWAYMODE:
  None.
  
  PERFORMANCE:
  None.
  
  PERFBOOST:
  None.

  Here is a release of energy report (Note: site Forum HP changed the HTML code):

  Power efficiency Diagnostics report
  X 360 computer name
  Analysis time 2016-01 - 06 T 15: 16:32Z
  Scan duration 60 seconds
  System manufacturer Hewlett-Packard
  Product system name HP spectrum x 360 Convertible 13
  Date of the BIOS 10/23/2015
  Version of the BIOS F.2D
  Build OS 9600
  PlatformRoleMobile platform
  Plugged In true
  Number of processes 164
  Contexture 1892
  Report GUID {f8670991-ccc2-4c9e-b743-81cb15d13b03}
  Results of the analysis

  Errors

  Suspension device: USB get USB selective suspend
  This device is not in the State of selective suspension of USB. Processor power management can be prevented when the USB device is not in the State of selective suspension. Note that this problem will not prevent the sleep system.
  Name of device Microsoft mouse and driver detection keyboard (USB)
  Host controller ID PCI VEN_8086 & DEV_9CB1
  Host controller location PCI bus 0, device 20, function 0
  Device ID USB\VID_045E & PID_0745
  1 port way

  CPU utilizationrocessor use is high
  The average CPU utilization during the trace was high. The system consumes less power when the CPU usage average is very low. Examine the use of the processor for the individual processes determine the applications and services that contribute the most to the total CPU usage.
  Average use (%)     11.12
  Platform power management capabilitiesCI Active Express - State Power Management (ASPM) disabled
  PCI Express Active State Power Management (ASPM) has been disabled due to incompatibility with the hardware on this computer.

  Device drivers:
  Devices with missing or misconfigured drivers can increase energy consumption.
  Card device name Cisco Systems VPN for Windows 64-bit
  Device ID ROOT\NET\0000
  State of the device 0 x 1802401
  Code 0 x 16 device problem

  Caveats

  Platform timer resolutionlatform Timer resolution
  Default platform timer resolution is 15.6ms (15625000ns) and should be used whenever the system is idle. If the resolution of the timer is increased, processor power management technology may not be effective. The resolution of the timer can be increased due to media playback or graphic animations.
  Current resolution of the clock (100ns units) 10007
  Maximum Timer (100ns units) 156250
  Platform timer resolutionutstanding Timer request
  A program or service has requested a resolution of timer is smaller than the maximum platform timer resolution.
  Requested period 10000
  Asking to process ID 11968
  Applicant process path \Device\HarddiskVolume4\Program files (x 86) \Hewlett-Packard\HP Support Framework\HPSF.exe
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 8464
  Average use (%)     1.09
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0.59
  0.48
  \SystemRoot\system32\ntoskrnl.exe 0.00
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 1360
  Average use (%)     1.09
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0,58
  0.47
  \SystemRoot\system32\ntoskrnl.exe 0.01
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 9788
  Average use (%)     1.08
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0.59
  0.47
  \SystemRoot\system32\ntoskrnl.exe 0.00
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name HPSF.exe
  PID 11968
  Average use (%)     0.71
  Module Module average use (%)
  \SystemRoot\system32\ntoskrnl.exe 0,14
  \SystemRoot\System32\win32k.sys 0.10
  \Device\HarddiskVolume4\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll 0.10
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name netsession_win.exe
  PID 5828
  Average use (%)     0.67
  Module Module average use (%)
  \SystemRoot\system32\ntoskrnl.exe 0.42
  \SystemRoot\system32\drivers\ndis.sys 0.10
  \Device\HarddiskVolume4\Users\Zeldar\AppData\Local\Akamai\netsession_win.exe 0.04
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 5712
  Average use (%)     0.63
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome.dll 0.35
  \Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll 0.11
  \SystemRoot\system32\ntoskrnl.exe 0.08
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Name of process system
  PID 4
  Average use (%)     0.55
  Module Module average use (%)
  \SystemRoot\system32\ntoskrnl.exe 0.42
  \SystemRoot\system32\drivers\ndis.sys 0.05
  \SystemRoot\system32\DRIVERS\dne64x.sys 0.02
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Name of process explorer.exe
  PID 3988
  Average use (%)     0.43
  Module Module average use (%)
  \SystemRoot\System32\win32k.sys 0.15
  \SystemRoot\system32\ntoskrnl.exe 0,14
  \Device\HarddiskVolume4\Windows\System32\ntdll.dll 0.02
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 7920
  Average use (%)     0.39
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0.22
  0.14
  \SystemRoot\system32\ntoskrnl.exe 0.00
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name WWAHost.exe
  4604 PID
  Average use (%)     0.28
  Module Module average use (%)
  \SystemRoot\system32\ntoskrnl.exe 0.10
  \SystemRoot\SysWOW64\ntdll.dll 0.03
  \Windows\SysWOW64\jscript9.dll 0.03
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name UoipService.exe
  PID 2544
  Average use (%)     0.25
  Module Module average use (%)
  \SystemRoot\system32\ntoskrnl.exe 0,14
  \SystemRoot\system32\drivers\afd.sys 0.02
  \Device\HarddiskVolume4\Windows\System32\mswsock.dll 0.01
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 6600
  Average use (%)     0.24
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0,18
  0.04
  \Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll 0.00

  Information

  Platform, resolution: timer Timer application stack
  The battery of the modules loaded for the platform timer low in this process.
  Requested period 10000
  Asking to process ID 11968
  Applicant process path \Device\HarddiskVolume4\Program files (x 86) \Hewlett-Packard\HP Support Framework\HPSF.exe
  Call stack \Device\HarddiskVolume4\Windows\System32\ntdll.dll module
  \Device\HarddiskVolume4\Windows\System32\kernel32.dll
  \Device\HarddiskVolume4\Windows\Microsoft.NET\Framework64\v4.0.30319\WPF\wpfgfx_v0400.dll
  \Device\HarddiskVolume4\Windows\System32\kernel32.dll
  \Device\HarddiskVolume4\Windows\System32\ntdll.dll
  Political power: Active Power Plan
  The current power in use plan
  Plan custom name
  Map of GUID {e427f965-afc6-4f07-b387-e9be116f159e}
  Power politicsower Plan personality (on battery)
  The personality of the current power plan when the system is on battery power.
  Personality power saver
  Political power: video quality (on battery)
  Windows Media Player allows to optimize the quality or energy savings during video playback.
  Mode of quality balancing video quality and energy savings
  Power politicsower Plan personality (Plugged In)
  The personality of the current power plan when the system is connected.
  Personality power saver
  Political power of political power Radio: 802.11 is a maximum Performance (Plugged In)
  The current policy of power for compatible 802.11 wireless network adapters is not configured to use reduced consumption patterns.
  Political power: video quality (connected)
  Windows Media Player allows to optimize the quality or energy savings during video playback.
  Quality optimization for video quality mode
  Success of queries: analysis of system availability
  The analysis was successful. No problem of energy efficiency have been found. No information has been returned.
  Battery information: battery
  Battery ID Hewlett-PackardPrimary
  Manufacturer Hewlett-Packard
  Serial number
  Chemistry LION
  Long term 1
  0 seal
  Nominal capacity 54720
  Last full 54720
  Platform power management capabilitieslooking at the States of sleep
  Sleep States allow the computer to access the modes low power after a period of inactivity. The waking state S3 is the State of default Eve for Windows platforms. The waking state S3 consumes only enough power to preserve the contents of the memory and allow the computer to return to work quickly. Very few platforms are supported States S1 or S2 sleep.
  False S1 sleep taken in charge
  False S2 taken sleep support
  True S3 Sleep taken in charge
  True S4 sleep taken in charge
  Platform power management capabilities: connected standby support
  Connected standby allows the computer enter a low power mode in which it is always on and connected. If supported, connected standby is used instead of the system sleep States.
  Connected supported watch fake
  Platform power management capabilities: Adaptive brightness is supported.
  This computer allows Windows to automatically control the brightness of the built-in display.
  Platform power management capabilitiesrocessor power management capabilities
  Effective processor power management allows the computer to automatically balance the performance and power consumption.
  Group 0
  Index 0
  Idle state head 3
  Idle Type idle ACPI (C) States State
  Nominal frequency (MHz) 2401
  Percentage of maximum Performance 100
  Percentage the lowest performance 20
  More low percentage of gas 2
  Control of performance Type ACPI Performance (P) / (T) States of butterfly
  Platform power management capabilitiesrocessor power management capabilities
  Effective processor power management allows the computer to automatically balance the performance and power consumption.
  Group 0
  Index 1
  Idle state head 3
  Idle Type idle ACPI (C) States State
  Nominal frequency (MHz) 2401
  Percentage of maximum Performance 100
  Percentage the lowest performance 20
  More low percentage of gas 2
  Control of performance Type ACPI Performance (P) / (T) States of butterfly
  Platform power management capabilitiesrocessor power management capabilities
  Effective processor power management allows the computer to automatically balance the performance and power consumption.
  Group 0
  Index 2
  Idle state head 3
  Idle Type idle ACPI (C) States State
  Nominal frequency (MHz) 2401
  Percentage of maximum Performance 100
  Percentage the lowest performance 20
  More low percentage of gas 2
  Control of performance Type ACPI Performance (P) / (T) States of butterfly
  Platform power management capabilitiesrocessor power management capabilities
  Effective processor power management allows the computer to automatically balance the performance and power consumption.
  Group 0
  Index 3
  Idle state head 3
  Idle Type idle ACPI (C) States State
  Nominal frequency (MHz) 2401
  Percentage of maximum Performance 100
  Percentage the lowest performance 20
  More low percentage of gas 2
  Controls of Type ACPI Performance (P) performance / Throttle (T)

  I found a thread on Microsoft answers community web site.  Unfortunately, it seems that Microsoft has not fixed even though this thread is over a year.  This has been driving me crazy.  In any case, the problem is with Windows 8.1 and is caused by the use of a Microsoft account to connect to the computer.  If the account is not connected, after a few hours the computer stops to fall asleep.  If you close the MS account, then the computer will sleep normally.  My dose is to convert my connection from the local computer to a local account and disconnect from Microsoft.  This process is easy to do, go into the settings of PC and disconnect the account.  It will keep your original profile.

  Here is the link to the thread that got clued in the solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/Windows-81-refuses-to-sleep-automatically-idle/6ab4aaaf-31bd-4baf-ABC6-62ba8c8260aa?DB=5&page=2&rtAction=1452178632575

  I consider this resolved issue that HP is concerned.  Microsoft needs to address the issue.  I'm not interested in switching to Windows 10 for compatibility reasons and, in this regard, the same problem can exist in the W10.

• Vista crashes after using it for a few minutes and then does not start (after a few hours - it starts and again the same problem)

  I'll have this weird problem and did not find the problem. Suddenly my laptop (Lenovo Y710 - 4 GB RAM - Windows Vista Home Premium 32 bit) crashes after a few minutes of activity, Vista freezes. CTRL + Alt + Delete does not work. If I force close to the bottom and then try to restart, it do display anything. I tried to start in safe mode, but after pressing f8 and it only beeps and still doest appear anyting on screen you. If I try to start the laptop after a few hours it starts again and minutes it freezes again. I noticed this problem for the first time when using RDP to my desktop, but it wasn't the first time I've done RDP. I have not installed new hardware or drivers. Am not able to nail the question, would appreciate any help.

  Thank you.

  This is no doubt hardware failure. The laptop could be overheating and/or other components could be involved. Contact Lenovo technical support or take to a competent local computer Tech do not use a type of BigComputerStore/GeekSquad of the place.

  If you have a pretty good level of computer skills, you can test some components yourself although it is more difficult to make accurate material on a laptop computer troubleshooting.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
  MS - MVP - Elephant Boy computers - don't panic!

• E2000 HTTP Port Fowarding stops after a few hours

  Port forwarding Port 80 stops working after a few hours and requires the router to be restarted to begin to transmit again. The firmeware is the last 1.0.04)is Build 7. I need to work reliably for several days without intervention.

  I guess it is a problem of port forwarding because I can access the IP address on my network within my network even when I can't access it from outside my network. I use the appropriate IP addresses because it sometimes works OK. A peculiarity is that, when I can't access the page, it loads as totally blank white without error message.

  I suggest restore you the router (30 sec), wait for solid power light and then reconfigure the settings.

• Printer Hp 6520 automatically shuts down after a few hours

  Original title - printer hp 6520 problem

  My new photosmart 6520 automatically shuts down after a few hours, it disconnects from my Win7 machine without using the material removal tool, if I get a nice loud bang when it does.  It is connected through the usb port on my Pavilion.  I don't mind to go to sleep, but I don't want to disconnect completely, because when I send a new print job, he didn't wake up automatically and print, I don't have to feed it manually upwards then it prints very well.  Any ideas on how to solve this problem would be greatly appreciated.  Thanks in advance.

  I could join HP support on this issue this morning.  There were two things - first HP printers now have a built-in surge protector so you should not connect it to an another surge protector.  Second, the default printer is delivered with activated automatic stop, turning off will do sleep, but not to turn it off, so that it accepts print jobs whenever one is sent.  So, if that helps anyone, good!  And thanks also for your help.  :^) gene

• WhatsApp 2.12.14 version crashes on iOS 9.2.1.  I reinstalled whatsapp 3 times and after a few hours, it crashes when opening

  MY whatsapp was working fine before 29 February. There was an update for whatsapp in date, after which my whatsapp continues to break down in 2 seconds after I open it on the latest iOS. I reinstalled with the back three times. It stops working again in a few hours to reinstall. Search Google says it might be iCloud or Facebook integration. Help, please.

  Same thing for me. It's extremely annoying! The only way to keep it from constantly crashing is constantly in contact with the screen with a finger...

• HP Deskjet Ink Advantage 6525: Printer loses the wireless connection after a few hours

  Hi all!

  Printer is connected and I see on the IP address screen. Desktop with Win7 and Ubuntu are used. After passing on the printer is working properly, but a few hours more later his inaccessible from the two systems. Printer indicates connection, I can see it in the router's web access tool, but it is inaccessible. I have to power off the printer, restart the router, then power on the printer - and it works. Not very comfortable.

  Someone knows how to fix this bug?

  Hi varspb and SteveB21.

  Thank you very much for your answers!

  Please take a moment to watch this video:

• WebLogic 10.3.6 gives error after a few hours

  Hi my installation and configuration has been very well and it does not work when I restart everything. After 1-2 hours application does not load and I get a lot of error in the console

  < 31 May 2015 08:15:12 AST > < emergency > < oracle.dfw.incident > < BEA-000000 > < incident 24 > created in "BEA-000337 [WebLogicServer]" key problem

  < 31 May 2015 08:19:12 AST > < error > < WebLogicServer > < BEA-000337 > < ExecuteThread [STUCK]: '1' for the queue: "weblogic.kernel.Default (self-adjusting)" has been occupied for the second "653" working on the req

  ask ' Workmanager: by default, Version: 0, scheduled = true, Started = true, start time: 653963 ms.

  [

  GET /MPSApplication/faces/Index.jspx HTTP/1.1

  Cache-Control: max - age = 0

  Accept: text/html,application/xhtml+xml,application/xml;q=0.9,image/webp,*/*;q=0.8

  User-Agent: Mozilla/5.0 (X 11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Safari/537.36 Chrome/43.0.2357.65

  Referer: http://aepv2.example.com:7777/SSO/login.jsp?site2pstoretoken=v1.4~18E76D9E~7A67E8CD9544C115E92DCAC9EBBE3BB22F6050060106B3BDACB53C00E5F624312D179D5AEDB3DFE6E6294FD4C74DE62E509EDCD0076DE313D

  A2874598CAD0C6E2376F95822AD65EC686FF85809CED89946EE545F3A86B7D041124ECD9B1ED02F88463451E945297075187DA268E17C1AE1EDA17B8F0B27CD099DA32A098171258060A80A6AA67D1C01B9FE2339AF44BDE9458B7ED9B23D4A60B694

  1D634AB86E07BF707C75984F4D91570817515753ACA746600791ED63EA932FCE1BA89D62F2D83010FFD2D5F0C78BFC4F94B40D814D4051D4573B9D4464 & p_error_code = & p_submit_url=http%3A%2F%2Faepv2.example.com%3A7777%2Fsso%2Fa

  UTH & p_cancel_url=http%3A%2F%2Fadfuat.example.com%3A7790 & ssousername = CHERRYDEV1

  Accept-Language: en-US, en - us, en; q = 0.8

  Cookie: MPSSESSIONID = BSC4VyGYNGF1MpjNYY2GFWMGL6nMvHrPNH5qpxn9s6rcwnZYKpGZ! 418582955; ADMINCONSOLESESSION = Z0hGVqTT6dnw8xyPQnvXP40gbLL7yTmTvXmZB0FlyY7hXypZ9fXL! 567968992; SST - adfuat.example.com - 7790 =.

  30D3CBA55A476B10709B4B07ED2042DD90D1F0C5DED46FE0F07BC392469D30E8D771ED1D58A545CFFE0FFCAB6AF120322374AC0EFF7A09288C5261DF136469CEF9DDD91E9B31CE8E98C616F45D01B8FF424DE3D45C1790EC982254D424210307A95E1

  E3D59CC1270709B8AEDDAD6C3DF744472004C1F3BB3691B19CCE53F98C64F9A1434340AA5DFD4A198BFF63D1991713B3967F6AC249AC55C805B5E03F16B0F732BDDB8B89CA4604E8A8A076D39CAA7D82366BF19E33ACF8D671BFDCDA3C46BDBDDC5FA

  FEB5E7B87B685ECA5F5FDDE6D13352E5D7762ADC733BE60C4A938F25EE44086EEE73528176F5C71CCFA983A720AA6D8FF192DC ~.

  ECID-context: 1.63954920339482; kXhglfC

  ClientIP: 10.14.86.99

  Chronos: aggregation

  Oracle-WebCache-Hdr-Inv-access: on, version = '1 '.

  HTTPS-SSL: off

  Calypso-Control: H_Req,-1408184652, 7790, 172.16.206.180

  Mother surrogate-capability: orcl = ' webcache/1.0 surrogate/1.0 ESI/1.0 ESI-Inline/1.0 ESI-INV/1.0 ORAESI/9.0.4 OWV/1.0 POST-Restore/1.0 ".

  Osso-user-Guid: AA229110574B6B2EE0440003BA1EC0C7

  Osso-user-Dn: cn = cherrydev1, cn = users, dc = example, dc = com

  Osso-Subscriber: DEFAULT COMPANY

  Osso-subscriber-Dn: dc = example, dc = com

  Osso-subscriber-Guid: 170AB6D7C44512F3E044080020CB263F

  Osso-Cookie-timestamp: 556a93be

  Connection: Keep-Alive

  Proxy-Remote-User: CHERRYDEV1

  Proxy-Auth-Type: Osso SSO

  X-Forwarded-For: 172.16.206.180

  Proxy-Client-IP: 172.16.206.180

  WebLogic-X-KeepAliveSecs: 30

  WebLogic-Force-JVMID: 418582955 X

  '] ", which is more than the time configured (StuckThreadMaxTime) of '600' seconds. Stack trace:

  NULL >

  < 31 May 2015 08:20:12 AST > < error > < WebLogicServer > < BEA-000337 > < ExecuteThread [STUCK]: '1' for the queue: "weblogic.kernel.Default (self-adjusting)" has been occupied for the second '713' working on the req

  ask ' Workmanager: by default, Version: 0, scheduled = true, Started = true, start time: 713966 ms.

  Please help me solve this problem

  Kind regards

  Ben

  Hi Ben,

  To get a thread dump:

  • Use Jstack (Jstack underneath of JDK_HOME/bin /)
  • Command syntax: jstack {PID} > dump.log
  • Where PID is the process identifier, and ' > dump.log ' is to print the result of jstack to a file

  For more information on taking thread dumps, you can consult this article > https://helpx.adobe.com/experience-manager/kb/TakeThreadDump.html

  Kind regards

  White

• Published video freezes after a few seconds

  I've been recording videos of screenshot with BB Flashback recorder Express 5, but the resolution of the original window was 1223 x 688 due to the limits of game and the screen. Exported from BB Flashback Express 5 .fbr format using the Codec Xvid MPEG-4 with the profile Xvid HD 720, as a .avi file, which plays very well in one of my video playback applications.

  I try technoscientifique it to the format 720 p (1280 x 720) for YouTube, using the first of 12 elements. If I do not do this, YouTube converts 480 p, which is far too low a resolution.

  I tried a few different profiles (the value prior to importing the video to the elements), PAL HD 720 and another similar, I forget. The result is the same in any case.

  Also, I was separating the sound using VirtualDub because with the original .avi, first sees only the sound for the first 17, then disappears, then I put the sound a separate track and defining the sound in the original video track from .avi to 0dB.

  I am publishing under .mp4 AVCHD, 1280x720p, high or medium, flow rate up to 17Mbps target of 5 or 10 5, audio 320 Kbps.

  The imported video plays fine in ss12, but the published video file freezes after 17 years, while the sound plays (I guess since my extra audio track). It's the same in all of my reading of video applications (MPC - HC 32 & 64, VLC, Media Player, movie & TV, ss12).

  The same thing happens with more than one different video file of the same recordset (for example, I recorded part 1, part2, etc., of the gameplay). They all do the same thing.

  I guess there must be something wrong with the original files... but I can fix it? If so, how? Or y at - it another way to convert my first .avi in 1280 x 720?

  Thank you!

  XviD is a format for watching only not publishing, that is why the issue of freezing.

  Use a format that like elements.

  If you set the format use something like avi with Lagarith codec.

  Lagarith Lossless Video Codec

• Close the lid, see nothing option, the laptop stops after a few hours

  Hello world

  I have a Lenovo Ideapad Z500 just for a few days and I discovered the following problem: I put 'doing nothing' in the 'close' Option to cover, then twice, I left the laptop with the lid and in fact it does nothing. A few hours later, I see clearly that he is still awake, but during the action to open the lid, laptop stops.

  What type of problem, could it be?

  I mean, at least, anyone know if it is a hardware problem or software?

  Thanks in advance.

  Note of the moderator; subject corrected

  Dear customer

  Please use the link to download and install the BIOS below was last updated.

  Link: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS035727

  Please check and let me know

  Thank you

  Alaa

• Debug.log file to C:\ completely evacuate my memory after a few hours.

  Hi everyone, this is my first post here and I couldn't make another post here for a while, please excuse me if I don't correct format. I had this problem with my laptop Lenovo Windows 7 (build 7601) where everytime I turn on my laptop, this file called debug.log which lies in my local disk drive is created. It starts as nothing, only a few hundred bytes, but almost every minute, it will trigger 100 bytes (that's when nothing really works then). When I start playing games, online, etc., it will start to get very disturbing. The debug.log when I look at the 6 hours from now will probably be about 20 GB +. I discovered just recently on this file because I need to keep my laptop on all night for my friends to play on a Minecraft Server I have running and I was constantly find the disc completely full. After a day or two, the debug.log will eventually be around 300 GB to 500 GB and I have 0 bytes remaining on my drive. The laptop reset will delete the debug.log until I log in again and it will start to regain memory. I looked this up online nothing helps. For anyone reading this, please try to help me identify what this thing and if I could turn it off / limit its size. Before I forget, here's what is in the file from the announcement: http://pastebin.com/KuBgBwL1 . I have no idea what this thing of Toolbox, the only other thing I saw with the word toolkit was in my list of services and called him "ToolkitSvc" (it is running). Please help me, it is empty my memory constantly and I don't want to restart my laptop everyday!

  Hello

  Try the steps from the following link:

  Slow PC? Optimize your computer for peak performance
  http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=kmc757u4Zlo
  http://support.Microsoft.com/mats/slow_windows_performance/en-us

• Adobe Acrobat stops after a few seconds

  Hello

  Recently, some of our users are problems where Adobe Acrobat Pro XI (11.0.16) stops after having been open for a few seconds.

  OS: Windows 8.1

  What I tried:

  • Removal tool including vacuuming (Download Adobe Reader and Acrobat tool - Adobe Labs ) can clean installation
  • Removal and remove manually the remaining records in C:\User\username\appdata\roaming, local and locallow, removing everything related to Adobe acrobat form the HKLM\Software and HKCU\software... then clean install
  • Adobe running with administrator privileges and it runs under a different user account
  • Removing and installing a version previous (11.0.05), which had the same stop to unextected
  • Removed the preferences as described here How to reset preference settings in Acrobat format.  (Note that he had no new folder preferences created after moving the former again and start Acrobat)

  So far, I have still no idea why this happens and how to solve it. I hope you can help.

  Thank you

  Thijs

  Hi thijsm96483536 ,

  He did up no error message when it stops? If so, please let us know.

  Also, please try referring to this link: Acrobat XI hangs at startup

  Let us know if that helps.

  Concerning
  Sarojini

• First CC - the program monitor goes black after a few minutes

  Hello

  
  I have the following problem:
  After 5-10 minutes, the program first DC monitor (2015) becomes black. The sequence and any remains intact, I can still do everything, but it does not show on the program monitor. When I restart first nothing is deleted or changed in any way that I myself.

  Technical information:
  I use Windows 8.1, 12 GB of RAM on 2 TB of free space on my hard drive and an Nvidia GeForce GTX 650.

  I would be very happy if anyone of you could help me with this problem because it's really in the way of my workflow to restart every few minutes.

  -Clara

  Thanks for all the help, but fortunately, the problem disappeared after the new update and I hope it stays like that.

• Get the guest OS unusable slow after a few hours / after restoring a snapshot

  Running an early 2009 Mac Pro with 10 GB of RAM, 2.66 Quad-Core Intel Xeon CPU, OS X 10.10.2. 7.1.1 the merger.

  I have a question where a guest OS I am running under Fusion will get inevitably unusably slow after that it worked for a while. Usually what happens is when I start the system, everything works well, and then after an hour or two, it will start running very slowly. Very basic operations like moving a window all about take a few seconds to complete, and I can see the screen slowly updated the window moves. Another example is by clicking on a menu in the menu bar might take several seconds for the menu even start drawing, and then a few seconds more for what it ends and during this time where the BONE is otherwise unresponsive. Essentially, the interaction of basic with the operating system is very difficult. If I stop the operating system and then start it back up again, it will resume performing normally for another hour or two.

  If I record a snapshot of a system and restore later, usually (but not always) will trigger to poor performance and I have to completely farm the guest operating system and start again it upward to fix.

  This happens regardless of which is the guest operating system. I did experience in OS X 10.6 - 10.9, Windows XP and Windows 7 32 - bit and 64 - bit.

  So far, I tried affecting versions material of these VMs to 10, as was recommended in other threads I've found to fix this exact problem. However, it is not fix things for me.

  Does anyone have an idea, what the problem? I'm quite like merger so far, more Parallels, but with this question, it is very difficult for me to get work done. I hope it can be resolved.

  Thanks in advance!

  I had the same problem since V7 came out.   At one point, from 1 hour to 7 days, all my virtual machines would slow to a crawl.   The only solution was to close all, vmware close and restart.   I spent months to fine-tune different settings.

  I did a few manual tweaks after searching on the net and see some common parameters which have been recommended.   After 4 to 6 weeks, my problem has not reappeared.   I don't know which of these parameters has solved my problem, but you can give them a try.   I don't have an SSD if you may or may not want to use the virtualSSD parameter according to your configuration.

  The settings that I have added are:

  mainMem.backing = 'swap '.

  scsi0:0.virtualSSD = 1

  MemTrimRate = '0 '.

  sched.mem.pshare.Enable = "FALSE".

  MemAllowAutoScaleDown = "FALSE".

  As usual, save your vm and use at your own risk.  They have worked very well for me so far, but each installation is different.

• Tecra T9100 turns off after a few hours!

  Hi, I was wondering if anyone know why my Toshiba T9100 turns off? It is turned on and after about 3-4 hours, it is still, just turns off, the battery is full?

  I have two of them, and they both make the same thing!

  Thanks :)

  Hello

  Maybe overheating. Try to check the ventilation openings and clean the unit.