"Project exceeds the capacity of the disk" when DVD is only 2.5 hours long

Similar Questions

• How to install updates without the disks when he asks?

  I am trying to install an update for Microsoft Word 2002, which is preinstalled on my computer. I did not all software on the disks when I bought the computer again. I have the certificate for Windows which accompanies it.

  In the installation of the update for Word, he gets up then invites me to insert the disk for Word because he needs a certain file. It is rather impossible for me to do.

  Any suggestions? Thank you

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Word.docmanagement&lang=en&CR=us

  Discussions of general issues of Word.

  They will help you with your Word question in the newsgroups Office above.

  See you soon.

  Mick Murphy - Microsoft partner

• How to hide a column in the report when there are only zeros.

  Hi Experts.,.
  
  Is it possible to hide a column in the report when there are only zeros.
  
  Thanks in advance
  Vincent

  Vincent Krishna wrote:
  Hi Experts.,.

  Is it possible to hide a column in the report when there are only zeros.

  Thanks in advance
  Vincent

  No out-of-the-box, but there are several workaround solutions if you want to continue an any of them:

  (1) use a view selector. A single report will be a pivot table with the column, the other will have the same report less column. Users can switch reports.

  (2) use a column selector. The two choices would be this column or an empty space. If white is chosen (because the user has no values), the column "will disappear" according to the report.

  (3) guided use NAV. This method involves the intervention of the user. Build a small report using the single column and put a filter "is not equal to" 0. Because there is only a single column, so all lines are 0, the report returns no rows.

  Use this report in the properties of guided navigation from one section of the dashboard. Assign to this "If the report returns lines" and put the report that contains the column in this section. Now add another article on your table edge and in the properties of guided navigation of this section, set on "If the report will return no rows" and it points to the small report as well. In this section, put a second version of your report without the column in it.

  When the column contains all zeros, the second section with column will not display in it; the first section is not displayed. When at least a line contains a value not zero, the first section is displayed with the column, and the second part will not be.

• Dual booting - problem with the disk when trying to start windows

  original title: problems with dual boot.  Windows does not play well with others.

  Hello

  I have Windows Vista Home Premium 64-bit included with the computer.  I installed Fedorah and it works on my computer.  When I installed it, but I had my hard drive partion.  I left most of the hard drive (about 400 concerts) as it was, when I booted up Fedorah worked well and gave me the option to boot or windows.  When I started in the window, however, it wouldn't let me start my computer, it says I have a problem with my drive.  With XP, it gives me no problem, I didn't ignore the disk check, but with Vista for some reason it doesn't let me start.  It gives me a few options of restoration to the previous status confuses the computer he says I manually type in which windows in the command line.  I don't have my windows CD, the only other option that I have that seems to work when I click it is restoring to factory fault which I don't want to do because I don't want to lose all my files.  Please tell me what I need to do.

  http://Fedoraforum.org/

  Fedora forums at the link above.

  A refund Stsrtup of Vista Disk link.

  Download the 64-bit on the right.

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  See you soon.

  Mick Murphy - Microsoft partner

• extra frame created in the upper left corner of the scene when exporting .mov only when the 3D rotation tool

  Hi, I really need help because my deadline is imminent, and I looked all over for an answer but have found nothing... I use Flash Professional CS6 on a Mac and have not had any problems to export before .mov until I tried to use the 3D animation tool. A copy of the first image in the upper left corner of the scene - but it shows not in the timeline panel, or when you test the movie. It appears in the preview by choosing export options and stays there during export. I did about 5 different tests and they all have the same problem - it will only go away if I do not use the 3d rotation tool. Problem is that I really want to use this tool to get the effect I want!

  Thank you very much in advance!

  I could easily create the same problem, even in the current version of Animate. The only solution I could understand was to put a keyframe of Tween non - 3D before where the 3D Tween starts. Just frame 1 look exactly as it does now, only to do tweening 3D pieces start from frame 2. It then exports frameless glitch.

• Why 5 recovery disks, when I used only 1?

  Ok. I had a software problem. I have ordered from HP recovery disks. No problem.

  I get 4 discs labeled 1-4 and an additional drive.

  I load the first disk, wait until he asks for 2, 3 and 4, etc.. Never happens. After the first drive, he did his thing and it seems good. Facing up and running.

  So why have 5 discs total when it held only 1? I expect almost the other shoe to drop or something, because I never loaded the other disks! What Miss me?

  Maybe it's because you have a recovery partition intact on the drive from which some files were used. If you had installed a new hard drive he would have probably asked each of them.

• How to delete files, getting the project exceeds the capacity of the disk in again

  I burned this project twice now, with DVDs fine engraving.  I wanted to just change a few things on the menu.  Now when I go to burn, I get the error message "disk capacity superior project.»

  This seems odd given that the previous fine burned DVD.  I think the previous Burns/renderings are in the path.

  In my edition previous softare, if I had to do something, a new rendering and re - burn video, I would click in the menu "delete all auxiliary files for this project."  But I don't see that in again.  Where can I remove this temporary/auxiliary/or what do you call the files?  What they call?

  Thank you!

  526 KB used for DVD-ROM content.  I don't know what the content from.  How/where would I delete that?

  Basically, this means that you don't have any content ROM. It's just the General fresh minimum necessary, you must add the ROM content - this size is normal.

  Back up a little, you said you did not have the Cache of database cleanup/remove function in audio/video IN & OUT. I was of course about my still (2.0), so I'd go for help and look for "Cache" as CS4 has probably moved things - sorry for the "wild goose chase."

  EncoreDVD 2.0, media Cache files are stored in a folder (Cache\Media Cache files) in the hierarchy of the project files. There will be several subfolders in this one. Do not know if in CS4 has changed this hierarchy.

  Good luck

  Hunt

• Receive an error message that Windows can not retrieve information about the disk when I try to put upgraded Windows XP to Windows 7.

  XP Home to Windows 7 upgrade Peoblems

  I can't update my laptop to windows 7, that he will enter the upgrade options, then it will say cannot retrieve information about this disk of computers. What should I do I deleted all leave them and still get this error. Thanks Chris

  It's a little late for this, but anytime you do an upgrade, you must be sure that your computer is compatible. My guess is your drive for windows 7 is a DVD and you have a CD or a witch of CD - RW drive can not read CD

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

• Urgent help repair 6 Lightroom Catalog "Lightroom encountered problems reading or writing to the disk when you try to repair the catalog»

  My Lightroom Catalog worked perfectly until 2 days ago.

  When I try to open my catalog this error message pop up

  

  And when I try to repair my catalog a green bar progress displays briefly, then this pop up.

  

  I clicked on 'Retry' several times but it still does not work. My catalog is on an external hard drive with 1.46 TB of free space. I use Lightroom 6 on a laptop with Windows 8.

  I tried other things:

  • Looking for a .lock file delete
  • Create a new catalog and import the other catalog in it (when I try to it says "Lightroom cannot import this catalog.) This catalog doesn't seem to be a valid Lightroom Catalog.')

  Help, please! I have not all backups with that I can restore my catalog. I am a student in photography and it would be extremely annoying that I lost all my edits/flags of this catalogue.

  margaretp4683231 wrote:

  You never solved this problem?

  I am totally confused and aren't sure what to do next.

  You need a new external drive, and you need to STOP using your old.

  There is no real repair a hard drive once it starts to miss. Of course you can repair the file structure, but it's to get the file there. Once a drive starts to go wrong it will never get better or even remain the same.

• Problems with the disk drive - DVD playback

  I have a Windows Vista Ultimate 64 bit PC with a Samsung SH - S223C DVD, player, which both are a little less than two years. Recently, I started having problems mainly watching DVD and also some problems of installation of video games. When you watch DVDs in Windows Media Center or Media Player, the player is very slow to load the disc, even sometimes not at all. When it's load and play the video may freeze a lot while the drive and fast shipping and rewinding are a nightmare, that nothing is really happening, the picture just freezes. Boredom, it's a day DVD can be read without problems, but the next I meet the above problems. I tried to buy a DVD-ROM of Hama Laser Lens Cleaner disc, which did not solve the problem, it has made no difference.

  I encounter any problems when you watch a video recorded on Media Center, I am the owner of a TV Tuner and all saved games video very well without any problems. Also, I live in England so my hard drive is region 2.
  I have no idea how to fix this, it is very annoying. I'd appreciate any help that anyone can give me.

  Thank you.

  Hello Dan

  You can contact Samsung on the drive and see if there is an update of the firmware. If this isn't the case, you can replace the drive because it sounds like the drive itself is a failure.

• I have a sony vgn nr460 and does not record the disk hard dvd

  I have a sony vgn nr460 and the dvd drive not registered when tried fixit said the driver lack an updated sony driver and device thing Control Manager even said installation driver fail can someone help me

  Hi dexlyndon

  1. What is the complete model of the computer number?
  2. are you referring to the DVD drive as DVD drive?
  3. do you think that no matter what error code indicated in the device properties in Device Manager?
  4. what fixit did you run?

  I suggest you to run the fixit from the following links?

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• When loading, error: field in the data file exceeds the maximum length

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  PL/SQL Release 11.2.0.3.0 - Production

  CORE Production 11.2.0.3.0

  AMT for Solaris: 11.2.0.3.0 - Production Version

  NLSRTL Version 11.2.0.3.0 - Production

  I am trying to load a table, small size (110 lines, 6 columns).  One of the columns, called NOTES is less error when I run the load.  That is to say that the size of the column exceeds the limit max.  As you can see here, the column of the table is equal to 4000 bytes)

  CREATE TABLE NRIS. NRN_REPORT_NOTES

  (

  Sys_guid() NOTES_CN VARCHAR2 (40 BYTE) DEFAULT is NOT NULL.

  REPORT_GROUP VARCHAR2 (100 BYTE) NOT NULL,

  POSTCODE VARCHAR2 (50 BYTE) NOT NULL,

  ROUND NUMBER (3) NOT NULL,

  VARCHAR2 (4000 BYTE) NOTES,

  LAST_UPDATE TIMESTAMP (6) WITH ZONE SCHEDULE systimestamp NOT NULL default

  )

  TABLESPACE USERS

  RESULT_CACHE (DEFAULT MODE)

  PCTUSED 0

  PCTFREE 10

  INITRANS 1

  MAXTRANS 255

  STORAGE)

  80K INITIAL

  ACCORDING TO 1 M

  MINEXTENTS 1

  MAXEXTENTS UNLIMITED

  PCTINCREASE 0

  DEFAULT USER_TABLES

  DEFAULT FLASH_CACHE

  DEFAULT CELL_FLASH_CACHE

  )

  LOGGING

  NOCOMPRESS

  NOCACHE

  NOPARALLEL

  MONITORING;

  I did a little investigating, and it does not match.

  When I run

  Select max (lengthb (notes)) in NRIS. NRN_REPORT_NOTES

  I got a return of

  643

  .

  Which tells me that the larger size of this column is only 643 bytes.  But EACH insert is a failure.

  Here is the header of the file loader and first couple of inserts:

  DOWNLOAD THE DATA

  INFILE *.

  BADFILE '. / NRIS. NRN_REPORT_NOTES. BAD'

  DISCARDFILE '. / NRIS. NRN_REPORT_NOTES. DSC"

  ADD IN THE NRIS TABLE. NRN_REPORT_NOTES

  Fields ended by '; '. Eventually framed by ' |'

  (

  NOTES_CN,

  REPORT_GROUP,

  Zip code

  ALL ABOUT NULLIF (R = 'NULL'),

  NOTES,

  LAST_UPDATE TIMESTAMP WITH TIME ZONE ' MM/DD/YYYY HH24:MI:SS. FF9 TZR' NULLIF (LAST_UPDATE = 'NULL')

  )

  BEGINDATA

  | E2ACF256F01F46A7E0440003BA0F14C2; | | DEMOGRAPHIC DATA |; A01003; | 3 ; | demographic results show that 46% of visits are made by women.  Among racial and ethnic minorities, the most often encountered are native American (4%) and Hispanic / Latino (2%).  The breakdown by age shows that the Bitterroot has a relatively low of children under 16 (14%) proportion in the population of visit.  People over 60 represent about 22% of visits.   Most of the visitation comes from the region.  More than 85% of the visits come from people who live within 50 miles. | ; 29/07/2013 0, 16:09:27.000000000 - 06:00

  | E2ACF256F02046A7E0440003BA0F14C2; | | DESCRIPTION OF THE VISIT; | | A01003; | 3 ; | most visits to the Bitterroot are relatively short.  More than half of the visits last less than 3 hours.  The median duration of visiting sites for the night is about 43 hours, or about 2 days.  The average Wilderness visit lasts only about 6 hours, although more than half of these visits are shorter than the duration of 3 hours.   Most of the visits come from people who are frequent visitors.  Over thirty percent are made by people who visit between 40 and 100 times a year.  Another 8% of visits from people who say they visit more than 100 times a year. | ; 29/07/2013 0, 16:09:27.000000000 - 06:00

  | E2ACF256F02146A7E0440003BA0F14C2; | | ACTIVITIES |. A01003; | 3 ; | most often reported the main activity is hiking (42%), followed by alpine skiing (12%) and hunting (8%).  More than half of the report visits participating in the relaxation and the display landscape. | ; 29/07/2013 0, 16:09:27.000000000 - 06:00

  Here's the full start of log loader, ending after the return of the first row.  (They ALL say the same error)

  SQL * Loader: Release 10.2.0.4.0 - Production Thu Aug 22 12:09:07 2013

  Copyright (c) 1982, 2007, Oracle.  All rights reserved.

  Control file: NRIS. NRN_REPORT_NOTES. CTL

  Data file: NRIS. NRN_REPORT_NOTES. CTL

  Bad File:. / NRIS. NRN_REPORT_NOTES. BAD

  Discard File:. / NRIS. NRN_REPORT_NOTES. DSC

  (Allow all releases)

  Number of loading: ALL

  Number of jump: 0

  Authorized errors: 50

  Link table: 64 lines, maximum of 256000 bytes

  Continuation of the debate: none is specified

  Path used: classics

  NRIS table. NRN_REPORT_NOTES, loaded from every logical record.

  Insert the option in effect for this table: APPEND

  Column Position Len term Encl. Datatype name

  ------------------------------ ---------- ----- ---- ---- ---------------------

  FIRST NOTES_CN *;  O (|) CHARACTER

  REPORT_GROUP NEXT *;  O (|) CHARACTER

  AREA CODE FOLLOWING *;  O (|) CHARACTER

  ROUND                                NEXT     *   ;  O (|) CHARACTER

  NULL if r = 0X4e554c4c ('NULL' character)

  NOTES                                NEXT     *   ;  O (|) CHARACTER

  LAST_UPDATE NEXT *;  O (|) DATETIME MM/DD/YYYY HH24:MI:SS. FF9 TZR

  NULL if LAST_UPDATE = 0X4e554c4c ('NULL' character)

  Sheet 1: Rejected - error in NRIS table. NRN_REPORT_NOTES, information ABOUT the column.

  Field in the data file exceeds the maximum length.

  I don't see why this should be failed.

  Hello

  the problem is bounded by default, char (255) data... Very useful, I know...

  you need two, IE sqlldr Hat data is longer than this.

  so change notes to notes char (4000) you control file and it should work.

  see you soon,

  Harry

• You can change the location of the automatic backup folder after creating a project on the first CC 2015?

  Trying to figure out from there is a way to change the location of the automatic backup folder after a project has already been created and the location of the automatic backup has been chosen. The reason for this is because we have an active work with a project that has been meet with an "unknown error" while he was trying to save on our server and also prevents form Auto-Save save projects. After you create a new project on the disk of the local computer and the Auto-Save in the same place, we decided later that we could like and the Auto-Save to live on two separate discs. I was wondering if there is a way to move the AutoSave folder without having to make a whole new project and copy everything on him. I searched through previous assignments, and even if current discussions focus on setting up an automatic backup location, I can't find all the topics related to the evolution of a current configuration.

  Thank you

  Stu-

  You just go to the project settings dialog box and change when the AutoSave file is defined.

  A couple of things about the Auto-save...

  -It waits a few seconds in action, so if you have a busy beaver editor constantly change things he could not AutoSave for quite a while...

  -automatic backup fact that both 'levels' it is wise to use Save-as to increment your project as you advance. So you can be sure that if you are on the last edit to the project AND... If corruption occurs, you have previous increments of work regardless of their deletion.

  Neil

• How to save stationglobals the disk in Labview

  Hi, can anyone suggest me how to save the values of stationglobal the disk when my vi is running? I update the stationglobal property set API TS call in my vi. But when I left the TestStand and open again the old values of stationglobal are still there and not news. What should I do to update the values of stationglobal? If anyone has any sample vi please provide me.

  Thanks in advance,

  Nadie

  Try this. You don't mention the version of LabVIEW, you use so I recorded to 8.0.

• Can I get the Win 7 on a hard drive with multiple partitions without erasing all the data on the disk

  I have a HP p6310f with a 1 TB hard drive partitioned into two partitions.  One I have a Win 7 OS, which becomes more and more corrupt.  I would get a new version on the other partition and keep the old version until I don't know that I have restored all the programs and data properly, just in case I need something and are struggling to rebuild.  Is this possible?  When I tried to install the recovery disks, they said that the entire disk, not just the score, would be erased.  This seems a bit silly, but I am very worried about losing key information and programs that I am not able to restore.

  Hello

  If you use HP recovery disks to reinstall the operating system, you are right that they reformatted the whole HARD drive before installing the operating system.  As far as I know, has no way around that.  The only thing I can suggest is to make sure that you are able to get the installers of any program that you need before you restore the PC and maybe do two backup copies of all your personal data, just to be sure.

  On the link below, just select your operating system (Windows 7 32 bit or 64 bit) and verify that you are able to download the drivers and software you need before you reinstall it.  You can always save installers for a writable DVD etc. now and then just to run it from the disk when you want to reinstall.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=us β = en & product = 4107914 & 〉

  I hope this helps.

  Best wishes

  DP - K