Properties of HingeJoint help

Similar Questions

• My disk cleanup not in system tools, hard disk and even the 32 system folder properties. Need help

  I have problems with my drive cleanup.exe, I try to cleapup my hard drive with disk cleanup but there is no diskcleapup in my hard drive directory, real estate system tools and also my system 32 folder...

  I just format and install the new windows xp sp3 operating system, but the disc cleapup sad does not... IDK what's going on...
  Any solution for this?

  Hi HafizAkira,

  You can try the open disk of cleaning of

  1. start-> all programs-> Accessories-> system-> disk cleanup tool.

  2. my computer-> right click on your Local C drive-> properties-> tools-> disk cleanup.

  3. click on start-> run, type &-> cleanmgr.exe-> Ok.

  I hope this helps.

• Text field overprinted when you print - properties look OK - help

  I have a problem with a text field in a form that I created using Acrobat X Pro on a PC running Windows 7 Ultimate.

  Document was created originally in MS Word 2007 and then convert to the form using the form wizard.  I have the selected font like helvetica auto-size, but the problem exists even if I change the font size of 10 or 12.  In the text properties everything looks OK.

  The form looks fine on the screen, but when I go to print the text either does not the length of the field and seems to be all scrunched up with overlapping letters, as if there is no space kerning between letters.

  First screenshot is of the screen display.  It seems.   Second screenshot, this is what is looks like print.   Note, this is not a problem with my HP printer, as happens even when I print to PDF.

  Help!

  Thank you

  Peter

  

  I downloaded your file and you have more than one field duplicate a heap cells.

  Go back to Acrobat > forms > change

  Click on each field.  to the right in the list of registered names, you will see something like name 0 #, 1 # name and so on

  remove all duplicates except one named #0 name (the name will change automatically to the name only) most of the fields on the page 1 and 2 have been reproduced.

  It shows like shadows, it's fields are not perfectly aligned.

• Cannot display the properties of the desktop printer

  I have Windows 7 SP1 and Office 2007.

  I just bought a new HP Officejet Pro 276dw.  Installation was fine and I can print from all Office applications.  What I can't do though, is change the printing of any of the applications properties.

  I click the icon 'Print' (or ctrl + P) and the dialog box opens.  Can I change the number of copies, etc., but if I click on properties of the application (Word, Excel etc.) "freezing".

  If I try to close I get the message that a dialog box is open (it is not)

  The only way I can close the program must force via the Task Manager.

  I also found that if I click on seek a printer (even if it is displayed) I get The Active Directory Domain Services is currently unavailable.

  I can access the printer properties via the HP desktop icon, but it's very slow.

  Connection is made by residential wireless Group, but I also tried a usb connection and the result is the same.

  My Epson previous (a deceased) worked very well and no problems to access the properties.

  Help all very warmly received.

  Thank you

  Pls check:

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-drivers/HPNetworkcommunicator-exe-we-need-a-solution-now/TD-p/1051357

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/HP-network-software-causing-slow-computer-need-help/TD-p/2621721

  Some of the suggestion, it might help (such as disabling function scanning office etc.). He is continually questioning and interrogation of the registry that might be causing delays.

• Windows 8 cannot access the drive properties by right-clicking on a no C SATA or USB drive

  Normally the drive properties are selected by right clicking the icon of the hard disk, which gives access to the use of storage and the Player options selected check disk. In Windows 8, I can get the properties of the disk on my C drive by right clicking, but not on any other drive. Right-clicking on any non C drive of the computer loses the office for about 10 seconds, then it returns, but never shows the drive properties window. Help, please! Thank you

  Hello

  Welcome to Microsoft, the best place for all your related queries windows community.

  I see that you are unable to access the drive other than drive C Properties window.

  I would like to suggest to run the command sfc/scannow because it is something related to the file system and check.

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. When the analysis is complete, the System File Checker tool indicates whether integrity violations were found. If integrity violations are detected, the System File Checker tool difficulty integrity violations.

  Follow these steps to run sfc/scan.

  a. press Windows + X and click/click on (Admin) command prompt.

  b b.. in the elevated command prompt, type sfc/scannow , and then press enter.

  NOTE: It can take some time to finish the race.

  Let us know the results.

  If you have other questions related to the properties of the disk, feel free to join us at any time. We're always here to help.

• Windows Vista: How can I get rid of favorite links

  Get and RT clock start exploring. Screen rises and layout on the left 'favorite links at the top"that irritates me to death, how can I get rid of him.

  Tampered with views of layout properties etc., nothing helped.
  It's just blockig the list of bad files.

  Hello

  do you mean the windows sidebar? Or the start list? Would be interesting who connects preferred, you mean because I can't imagine where they should be.

  Would appreciate an explanation more detailed your file since it s ti a bit odd read if you know what I mean.

  See you soon

• Using the CVI TS_StationOptionsGetExecutionMask

  Hello

  I'm trying to use the CVI TS_StationOptionsGetExecutionMask to change the properties of execution mask programmatically. When I try to run the user interface, I get an error "no such interface took in charge."

  Object handle shouold be used with this function?

  What context is it in?

  I tried the motor handle, the handle of the application manager, etc.. Still the same error.

  There is a serious lack of information about a part of NOR. There is a lot of help on the classes and properties, but the help and information on the methods and more specifically library features TestStand for Labwindows/CVI is no-do. A lot of Labview help out there on the use of classes and the manipulation of properties and such, but zilch of the NOR forgotten the LabWindows step child!

  If anyone looks like this, I solved my problem with the TS_EngineGetStationOptions function to get the handle of the StationOptions object.

• problem installing Win 7 32 bit (custom); Vista Home Premium SP1 and SP2 missing

  I'm trying to upgrade to Windows 7 (own pref) but the installation stops because I apparently do not have SP1 and SP2; (but were unable to a) find SP1 as a stand-alone file and b) have been unable to install through Windows Update (usually error 8024402 c). Followed the usual solution of properties IE nothing helps.  How can I me SP 1 to install so that I can to Win7?

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Windows Vista Service Pack 1 (SP1) - 434.5 MB
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en
  Windows6. 0-KB936330-X 86 - wave0.exe

  Windows Vista Service Pack 1 for Windows Vista 64-bit (size: 726,5 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=874A414B-32B2-41CC-BD8B-D71EDA5EC07C&displaylang=en
  Windows6. 0-KB936330-X 64 - wave0.exe

  Windows Vista Service Pack 1 - language standalone DVD ISO
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=a45652b1-E838-420a-b065-83960458e2ec
  6001.18000.080118 - 1840_iso_client_sp_wave1-FRMCSP1_DVD. ISO - 1418,1 MB

  Important: things to know before you download Windows Vista SP1
  http://TechNet.Microsoft.com/en-us/windowsvista/bb968859.aspx

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  Information about Service Pack 2 for Windows Vista and Windows Server 2008
  http://support.Microsoft.com/kb/948465

  Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2-five language standalone (KB948465)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

  How to get the latest Vista Service Pack
  http://support.Microsoft.com/kb/935791

  TaurArian [MVP] 2005-2010 - Update Services

• I have constant 'elevator music' playing in the background, how do I get rid of him?

  Computer on which I run and the music begins. I don't know where it comes from. I tried right-clicking the screensaver and checked properties but no help. Media Player checked but on help

  Download and install the free software "Autoruns" from Microsoft:

  Autoruns: <> http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx >

  When you run this program, click on the "Startup" tab and wait a minute or two.  It will give the list all the programs that start with Windows as well as a checkbox next to each one so that you can selectively disable one of them running when you restart.  Using the random approach, disable selected, restart and see if your problem goes away.  When you find the source of the problem, you'll probably know how to deal with (or you can leave it unchecked).

  HTH,
  JW

• unable mannualy disable ICS on Vista

  I have a big problem with my home network wifi during the last 2 butterflies due to my PC with Vista not willing to reinstall drivers dlink pci card dwa525;

  When I uninstall it it pops up error with the text "Please disable ICS manually.
  and then I install the drivers in the next time he said "syntaxis INF error".
  people in the Russian community advising me stupid things like bizzare: right click the mouse on the internet connection and uncheck ICS servise, but I can't find one on VISTA! cuz there is no such a VAT in connection properties
  pliz help me how to fix it
  TIA

  Hi tia,.

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 2: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Follow the steps in the article.

  Network connection problems

  Windows wireless and wired network connection problems

• Boots to black screen

  I'm trying to fix my moms laptop. His boot to a black screen. Everyonce in a while, I can get to a good start. I ran spyware and cleaned of all these problems. But I'm still not start correctly. I have to really just get transferred pictures if I can do a "wipe" (I guess that's what his name), but I can't get the laptop to accept all types of removable media (sc card or a cd to burn the photos). Any suggestions on what to do? I tried to do a check disk through my computer, but when I right-click to go to properties to put in place the check disk for the next reboot. Nothing happened when I clicked on properties.

  Help, please

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Unavailable modern theme

  After the installation of Norton Utilities, it slowed down my computer and disabled the modern heme (new look). I'm unable to locate it through the usual properties. Any help would be appreciated

  Norton seems to slow down the computers, because it uses a lot of system resources.

  http://www.Symantec.com/support/

  As you say that the problem was caused by Norton, please contact Support for assistance.

  You can try this:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-desktop-theme

  Read the above about the themes of Vista.

  If you still have problems of re-download drivers graphics:

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Install Vista SP 1 and SP-2 (32-bit) to upgrade to Windows 7

  I'm trying to upgrade to Windows 7 (own pref) but the installation stops because I apparently do not have SP1 and SP2; (but were unable to a) find SP1 as a stand-alone file and b) have been unable to install through Windows Update (usually error 8024402 c). Followed the usual solution of properties IE nothing helps.  How can I me SP 1 to install so that I can to Win7?

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=B0C7136D-5EBB-413B-89C9-CB3D06D12674&displaylang=en

  Stand-alone version of Windows Vista Service Pack 1 five language standalone (KB936330) 32-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Microsoft LifeCam Show color issue

  I just got a new Microsoft LifeCam Show, and the color is off. I wear a dark brown shirt and its projection upward in light gray. Other colours seem to be grayed out too.

  I tried to play with the properties, but nothing helped.

  How can I fix?

  Hello

  I suggest to install the lifecam on another system and check if the problem persists.

  If it persists also then on another system, it could be that the product is defective. I suggest you to return the product and exchange it for another lifecam. I suggest you contact Microsoft support hardware for help. Click on the link below.

  http://www.Microsoft.com/hardware/digitalcommunication/ProductList.aspx?type=LifeCam

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP LaserJet 4300 prints gibberish for a single user, but prints OK for all others on a Windows 7 32-bit

  HP LaserJet 4300 printer installed via LPT1 using Universal Print Driver v5.2.6.9321 on a desktop HP 8100 running Windows 7 Enterprise 32-bit SP1.

  This printer prints gibberish for a particular user, any type of document that it tries to print.

  Not sure when the problem started, the user uses a network printer to work around this problem. It allows to print to one of the other HP printers on our network OK, including another 4300 in the hallway.

  Everyone can connect and print the documents themselves OK on this office using this printer.

  Tried to restart the HP 8100 and power cycling and off the 4300. Also uninstalled and reinstalled the 4300.

  I have updated the firmware on the 4300.

  Change the print processor in the printer properties did not help either.

  Analysis of virus and malware detected any problems.

  Any advice for this problem would be greatly appreciated.

  Hi MDOTd5-247,

  The product that you have is a printer. I suggest you post in the forum for HP Business Support for a better chance to find a solution.

  Here is the link to the Board Commercial Laserjet:

  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413