property combination dialog on start up on windows

Similar Questions

• How to start using the Windows XP cd?

  Can someone tell me how to start using my Windows XP cd (I don't know what it is). I have XP Professional on Lenovo ThinkCenter. Also how to enter to the Recovery Console (not sure how to do this). Thank you

  OK it's on my other desktop Lenovo ThinkPad ThinkCenter A61 model type 9120CT 0, with XP Professional. This calculation allows to logoff users once they have logged in. So I went in Rescue Recovery 4 and has a completely restored system since the last backup. There was a widow of MISTLETOE and a button to select. It wasn't a problem because we did not all pictures stored in this computer. (Thank God!).

  Now at least user can connect, go to Windows Explorer, Internet Explorer etc...! I'm still trying to understand if there are other problems outstanding. So far have not found any :)

  Thank you for giving me encouragement barely pull these questions, especially since I have never fixed before computer problems. Just by chance, sometimes I have 2 laptops and 3 desktops desktop PCs. And I could just not afford constantly hire someone to solve.

  Just one last question, what is the combination of anti-virus software do you recommend me to use?  Thanks again.

• computer does not start after the Windows XP logo window

  Windows xp home edition
  service pack 2
  Dell inspiron 1501

  1. computer does not start after the Windows XP logo window
  2 works well in safe mode, even connect to the external monitor
  3. I reinstalled xp many times, problem stil exist.

  All the answers?

  Hi dhanushm,

  1. What happens after the Windows logo screen?
  2. You receive an error message?
  3. You have security software installed on the computer?
  4. Have you performed an installation clean Windows XP and even after that this problem exists?

  Method 1

  As the computer starts up fine in safe mode there is a possibility that some third-party programs installed on the computer is the origin of the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

  Method 2

  If fails it above step can refer to the article below and try the steps mentioned, check if it helps.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

• "Let's Get Started" upgrade to Windows 10, MB 2613,7

  N °

  Shit I don't WANT immediately. I have 7.1 Windows 64-bit and does not seek to update to 10 immediately I left working them the bugs out rather than be their Guinea pig.

  I can not install other updates (defender of the window, et al.) through Windows Update as the title is important on the Update window. When I check "all the updates available" it shows that I have updated 'important' (none are listed for 10) for windows defender and others, but when I select them and went back to the screen "install", it of "Let's Get Started" upgrade to Windows 10, MB 2613,7 and not pledging all other updates I just chose.

  Now I have (uninstalled) fact Kb3035583 option half a dozen times and it is NOT on my system more (that I can find) and was OK until 2 days ago (11 November) when I had to do the security updates monthly and a bunch of Office updates (including monthly scanning of malware). After that, I got the TITLE on my Windows 7.1 updates page saying, you guessed it, "Let's Get Started" upgrade to Windows 10, Mo 2613,7I did scans, newspapers turned on, and I can't find any article that mentions nothing other than the problem of Kb3035583 so I am confused.

  Please help me by removing the Windows 10 let's get Started option so I can continue to download updates for my current system.

  Thanks in advance.

  Hello

  Thanks for posting your query to the Microsoft forum.

  I appreciate your efforts to try to solve the problem and I will definitely help you with this.

  Please follow the steps in method 1 to method 3.

  Method 1: uninstall the update of Windows as follows:

  Remove the Windows Update KB3035583.

  If the problem persists, follow method 2.

  Method 2: Rename the GWXUXWorker.exe

  Complete the GWX.exe process using the Task Manager. Also rename the GWXUXWorker.exe and the GWX.exe to .old as the location of the directory suffix: -.

  Windows\System32\GWX, if get any problems by renaming may give permission to respective filesystem and then try renaming again. OR you can remove the folder from the directory.

  

  If the problem persists, follow method 3.

  Method 3: The registry key to stop notification : -.

  1. Press Windows + R keys on your keyboard to open the Run dialog box.
  2. In the Open field, type regedit.
  3. Click on OK.
  4. Click Yes on the user account control (if prompted).
  5. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\CurrentVersion\Gwx
  6. A right click.
  7. Click on change.
  8. In the data value: on the ground, DWORD: 00000001.
  9. Click on OK.
  10. Output the registry editor.

  Important this method contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  ____________________

  Thank you best regards &,.

  Isha Soni

• After the awakening of the mode standby, Thunderbird crashes if the start menu of windows 10 is open RESOLVED in version 38.3.0

  If I have Thunderbird up and then I put windows in sleep mode, when I come back once again, the start menu in Windows 10 appears automatically (can someone tell me how to stop this?). If I click anywhere on the screen menu start disappears and everything works fine, but if I forget to do it and for example, double-click on an email to open it, Thunderbird and then freezes. If I close Thunderbird and re-open he, she, then it brings up the email that I had clicked on, so he must have tried to open it while it was frozen.
  This isn't a big problem, just annoying bloom. Don't know if it's a problem of Windows 10 or Thunderbird. If someone can tell me how to stop start menu from popping up automatically, it wouldn't solve the problem, but it would be at least!

  Version 38.3.0 is now available. Resolve the problem?

• How can I make Thunderbird start car with windows startup

  How can I make Thunderbird start car with windows startup

  You can by placing a shortcut in the startup folder of windows, just like any other windows program.

  However if you do, you are likely to encounter problems such as downloading email while still load the antivirus and the network is busy, announcing the arrival of machines on the network (which can be a network a) and any other program of a dozen are loading is heavy risk of timeouts and disconnections of the server as well as error messages that make little sense because they are something that still load.

  The bottom line is so safe that you can, but if there are any questions bring her out of there first.

• When I click on my desktop shortcut icons in the new firefox 4 I get a dialog box that indicates that windows does not find that the website

  I have improved the previous version of firefox to the new firefox v.4 and now all the shortcut icons I used with the previous version display a pop-up dialog box that says that windows does not find this website, check the spelling - address - etc. But immediately after this window opens the Web site loads. I tried to load the original site, delete the old shortcut and drag the new shortcut to my desktop, but Firefox always gives me the same message.

  See:

  • http://KB.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

• Mixed language in the stop/restart/logout dialog and in the login window

  Since I upgraded to El Capitan my shutdown/restart/logout dialog and in the login window appears in 2 different languages. My mother tongue is Italian, but I have a message in English.

  My default language is System Preferences is Italian and that is not installed.

  Try I'have:

  In the menu bar, select

   ▹ System Preferences... ▹ Language & region

  Deselect each language unwanted from the list and click OK. Then select your region in the menu of the region.

  Close the preferences window. You may need to sign out and then sign back in before the change takes effect.

  If there is no change, reset the PRAM.

  But nothing!

  Can you help me please?

  Do you have other users accounts in your mac?

• Can not register opimize: when I start computer, a window opens opimize the registry failed

  When I start computer a window opens opimize the registry failed

  Hi Harry,.

  Looks like you have some program registry installed and programmed to run at startup, which does not work.  I suggest we identify and remove the boot and then remove it totally from the system (uninstall).  Registry modification programs are generally risky, rarely do much good, can cause great harm and are not really necessary as Windows does a good job of managing the registry on its own.

  Try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once don't forget to reset your operating system to normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  Start in safe mode with network and see if the problem is here.  A result allows us to narrow down the search for the cause.

  I hope this helps.

  Good luck!

• How do I get 'My recent documents' on my Start menu? (Windows XP)

  It took me a long, long time to ask this question - did not want to appear stupid I guess. My PC coming up to two years and never had 'My recent Documents' in my Start menu, don't figure out how to do something that should be very simple.

  Help, please!

  Ian Jackson

  Hi Jackson,

  Thanks for posting in the Microsoft community!

  The description of the issue you want to get recent documents on the start menu. I'll be happy to help you on this question.

  Let us try the steps from the following link:

  How to view, use, and Clear "My recent Documents" on the Start Menu in Windows XP
  http://support.Microsoft.com/kb/307875

  After trying the suggested steps, let us know if you are able to get the recent documents on the start menu. Let us know if you have any other issues related to the Windows in the future.

• My acer aspire one does not start. the scrolling windows screen, then screen turns off. logon appears and resets, sys

  My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.

  I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))
  the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...

  Hi Srimotu,

  ·         You get an error message or an error code?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Try starting it in last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2: Try to start in safe mode.

  http://support.Microsoft.com/kb/315222

  If you are able to boot into safe mode, try a clean boot.

  http://support.Microsoft.com/kb/310353

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.

  Also disable automatic restart in the event of system failure

  http://support.Microsoft.com/kb/307973

• Need help message' w/error Unable to start the s window media Interface. Make sure you have at least WMP10. »

  I downloaded WMP11 to download another program and I get this message ("unable to start the s window media Interface. Make sure you have at least WMP10. »).  This message appears when I click on the new program and it loads.  As soon as it loads the first program screen appears and displays this error message on WMP 10.  When I click ok it goes, but I can't get the new program to do anything.

  So before asking on the problem of new program, I would like to fix this so it keeps popping up.
  I'm not too calculates saavy so I need clarification.

  Thank you

  Where did you downloaded WMP 11?

  Uninstall WMP 11 and check again the issue. If it stops then reinstall WMP 11.

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=8163

• Every time I open a file in Media Player 11, I get a dialog box telling me that Windows Installer is "preparation for installation.

  Whenever I open a file in Microsoft Media Player 11, (11.0.5721.5280) I get a dialog box telling me that Windows Installer is "preparation for installation.

  He tell me what it is trying to install and crashes

  No media plays back.

  Cancellation does not - it retrys with encouraging them. The only way to get rid of the dialogue is Ctrl/Alt/Del and end task. It also closes WMP11

  SP3 Win XP32

  I just installed Office 10

  I ran the repair of Office 10

  I uninstalled WMP11 and reinstalled

  I ran "Fix IT" page Support MS

  I run MS Security Essentials... It is to this day and I run a full scan

  I think you meant:

  "a. initially, box run, type"msiexec /unreg", and then press ENTER."

  I did and it helped somewhat. Message anyway, but he went and the media played.

  If I did:

  "(b) then type" msiexec/regserver"and press ENTER."

  The problem comes back

  I went a step further and ran a restoration of the system to the day, I installed Office - it worked.

• start-up problems: when you turn on the computer, it goes through all the trunk starts to load windows xp then starts again again and again

  When you turn on the computer, it goes through all the departures start loading windows xp then again again and again...

  Hi Keryn_Jansen,

  1. did you of recent changes on the computer?

  2. you receive an error message?

  3 when was the last time it was working fine?

  Check if you can start the computer in safe mode or from the last good known Configuration.

  Advanced Troubleshooting for General startup problems in Windows XP

  http://support.Microsoft.com/kb/308041

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

• Why do I need to use "disable driver signature enforcement" option at the start of my window?

  I'm on windows vista Home premium 32-bit / laptop

  I had a problem with my "encryption" service & cannot install update. I found online gace and solve this problem. I have the windows update and install Microsoft security essential program. When I restarted my window, he was unable to boot completely and taken up permanently after showing my mouse arrow and black screen.

  I tried,

  Auto repair

  system restore

  safe mode

  Scan memory test

  But all the foregoing could not begin my window, then I tried "disable driver signature enforcement" in the option menu + F8 early start and MY WINDOW GOT START successfully.

  How can I solve this problem even with I want window to keep the signature of driver for security enforcement?

  * I have not add or remove any material

  Yes, I tried with "Last known good configuration" for nothing doesn't. In Device Manager, no yellow color symbols have been found.

  Thanks for your reply.

  I finally get rid my latptop format. It was 5 years window I used, I thought it's time to give him a drink.

  Thanks anyway.