PS CS4 upgrade installation

Similar Questions

• Wie kann ich Photoshop CS4 Upgrade Windows 7 Prof installieren auf. Berechtigungssoftware: Photoshop Elements 8. Both funktionierten auf einem XP Computer, der nach einem Crasch unbraubar wurde.

  SEHR item Damen und Herren,

  Photoshop CS4 Upgrade auf einem Win 7 PC installieren möchte. Die Berechtigungssoftware ist Photoshop Elements 8.

  Leider ist bei der requests nach detonation Photoshop Elements 4 bis 7 angegeben - aber nicht nur der 8.

  Yes kann ich das Upgrade CS4 nicht installieren.

  MIT thank wurde

  Bestattungen Hopfinger GmbH

  If pse8 was a upgrade valid for ps cs4, it should be available in the drop-down list when you start the installation of cs4.

  or, if you are right, you could install pse8 first and then install ps cs4.

• Serial number lost cs, cannot use cs 4 upgrade installer

  Try to install CS 4 (upgrade installer) on a new install of Snow Leopard.  Installer looking for a prior registered product.  I had installed CS 4 years, when I had been using CS.  No longer have the installation of CS in place so the installer can not find.  And I can't seem to locate the original disks for CS.  In my view, need go back nearly 8 years, maybe more.  What can we do in this case to the Setup program install?  Thank you.

  You must have installed the software or have the serial number of the previous version.  Although it is unlikely due to the age of the product, you can check your Adobe account online.

  An Alternative might be to contact Adobe Support by chat and see if they will help you.  I don't know if they're fine.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• Indesign CS4 upgrade

  Hello

  I can't find the indesign CS4 upgrade to the CS6. He has just updated level CS5 to CS6.

  Thank you for your help.

  Since the beginning of this year, Adobe no longer provides updates for that many versions back like they did.  CS6 products, now they allow only upgrade pricing for from CS5.  You missed the opportunity to upgrade from versions CS4 the end of the year.

  http://prodesigntools.com/Adobe-CS6-new-upgrade-policy-changes-postponed-CS3-CS4.html

• The second version CS4 Design Standard upgrade installation disc is lost.

  I want to perform a new installation of CS4 Design Standard version upgrade (German language), but the request 2 for windows installation disc is lost.

  I found that two download links. Here is the sequel describes:

  If you have purchased a CS4 detail produced under license and no longer have the installation media, you can download installers of alternative from this page.

  Problem with the first link: https://helpx.Adobe.com/de/Creative-Suite/KB/CS4-product-downloads.html

  No available version of Adobe CS4 Design Standard. Only Design Premium can be downloaded.

  CS4 serial number is not accepted.

  Problem with the second link: https://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html

  Adobe CS4 Design Standard version is available, but this download supports only English, French and Spanish (GB, US, MX and CA). German is not supported. CS4 serial number is not accepted. According to me, because I have an upgrade version and downloaded files are a full version.

  I burned the second installation media (app 2) since the files downloaded to a DVD. But this DVD has not been accepted during the installation.

  Please can you help me with the following questions:

  Where and how can I get a replacement DVD (only ask 2 DVD) for upgrade version CS4?

  Who should I contact for this?

  Y at - it the possibility of a version upgrade from CS4 download so that my serial number is accepted?

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC | XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 10, 11, 12, 13. 9,8,7
  • Lightroom: 5.7.1. 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Download and installation to Prodesigntools help links are located on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions". window using the Lightroom 3 link to see these "important Instructions".

• Hi, upgrade installation support needed

  Hello

  I bought an upgrade to adobe Illustrator. I have cs4. Instead of informing me of my mistake when I had trouble to install the first time (since I have no previous version), the support just made for me. Unfortunately its an old version and tech support is no longer available. I can't install it again because its an upgrade and I have no previous version. But technical support helped me once, perhaps this forum can help me once again. What lays in the balance is the 600 dollars I paid. Help, please! How can I install with no previous version upgrade? (and why not support tell me my error of purchase when I could still returned the product! jeeze).

  No one here has the ability to override the tne installation requirements.  If you can't get Adobe support for help then it is probably not that you can do.  Your best chances are to convince a support person to help you... hopefuklly you registered the product as it is in your account history.

  Here are some links to help get in touch:

  http://www.Adobe.com/support/chat/ivrchat.html

  http://www.Adobe.com/support/download-install/supportinfo/

• Problems with serial number for upgrade installation

  I am trying to upgrade photoshop cs2 to cs4 with a upgrade disc purchased (on my imac). The installer asked my cs2 serial number and it tells me that the serial number does not match the product. I know for a fact that this series number, as I installed cs2 on all my macs without problem. What am I doing here? The only other option it gives me is to operate as a 30 day trial, and it is unacceptable.

  You must contact Adobe Support by chat or phone when you have the serial number and activation problems.

  Here are some links to help get in touch:

  http://www.Adobe.com/support/chat/ivrchat.html

  http://www.Adobe.com/support/download-install/supportinfo/

• Dreamweaver CS3 Photoshop CS4 disc installation asking

  I'm trying to install Dreamweaver CS3 from the original installation disc and a progress bar gets about 1/2 way through the installation process and I wonder to insert the Photoshop CS4 install disc.

  The installation of Dreamweaver is not an upgrade. It is a master installation.

  I'm on a Mac OS 10.6

  It's weird.

  Does anyone have a solution?

  Run this, the re - install.  Ignore the name of the file.  They condense all in one package for CS3 - CS5 instead of separate packages for each:

  http://www.Adobe.com/support/contact/cs5clean.html

• Help necessary after CS4 CS3 installation uninstall problem

  Hello

  I recently upgraded my computer from Vista to Win7, so I spent a lot of time to update applications.  I realized my CS2 wouldn't work and I was told that I had to at least get CS3.  I bought the CS3 and installed on my two new Win7 machines without problem.  I then discovered that CS3 is no longer supported by Adobe, so I need to get CS4 or CS5. I installed CS4 trail and decided for now back to CS3.  I had not uninstalled CS3, but was disabled, not knowing if CS4 would no longer write it or if the two can co-exist.  uninstalled CS4 via the Control Panel, CS3 re-activated and all was well on both machines.  Then, on my machine main update of Adobe wanted to update a few modules, InDesign and Acrobat Pro.  Things went very well with the update until he asked me my CS4 disc?  I have it mood the second time and fed Alternatively the CS3 and CS4 disc... he let me not put both if I swapped the drives until I was no longer able to lift my arm and when everything is done, the installation failed.

  He left me with no functional InDesign.  To make things worse, activation could not connect to Adobe for some reason any.  I was able to use the phone process to activate products, but now I wanted to try installing CS3, but it wouldn't let me disable due to network issue, and there is no option to disable, internet phone or she to jump.

  I called Adobe and asked for help.  I talked about the problem of turning off for them.  They said to go and Uninstall CS3 and we arrange activation after the re - install.  Knowing that he might take a long time, he said he'd call me back... never did.  I tried to help and were unable to get help.

  What I have now is a CS3 uninstalled that I can't install at all, so I am in worse shape before, when only InDesign did not work.

  I have DW3 on the same computer and it is very well and has been very well throughout the process.

  I need a way to exorcise the PC of all memory of CS3 or CS4 so I can really start from scratch.  Is there a such a "wipe bomb Adobe" I might fall on my registry to really get rid of his insistence on the CS4 install disk need?

  I am convinced that CS4 did not uninstall cleanly, leaving files or settings that still refer to CS4, in conflict with any attempt to update or reinstall the product correctly.  I hope that this happened to someone else and has found a solution, far from rebuild the whole PC.

  Thank you!

  Lew

  Adobe Photoshop cleanup script is would have been good for just this sort of thing:

  http://www.Adobe.com/support/contact/cs5clean.html

  He said CS5, but it works on older versions as well (note the text at the beginning of the description).

  -Christmas

• Is it possible to reinstall Photshop CS4 Upgrade without installing the first elements?

  I'll have to reinstall all my software after a system restore.  Is there an easy way for me to reinstall my Photoshop CS4 update without also installing Photoshop Elements?  I inactivated Photshop CS4 until I did the restore - I hope I'm not missing anything else?

  KJHaymarket wrote:

  Please let me clarify, are saying you that CS4 will ask me to insert the disc of items during installation?  If so, that would be great!

  This is my experience with Photoshop upgrades, so I don't see it to be different. But it comes from adobe, we deal with that!

• Reinstalling Windows XP for Windows 7 upgrade installation

  Note: Windows XP to Windows 7 help / help of recovery

  I changed Windows XP to Windows 7. When I was on Windows XP I used conflicted software virus: Avast! and Norton. Finally this made me not be able to open anything, especially .exe.  I tried to do a system restore, but I couldn't go to the bar of programs in the start menu. After that, I thought it would be a good time to upgrade to Windows 7 and eliminate these problems. I tried to upgrade to Windows 7 just by putting in the disc, but it wouldn't load because of the previous problem. So, I put in the Windows XP disk and run Setup. When he arrived to the part when he says, "Windows Setup" it came with several errors saying that it could not find the files that should be on the disk. So, I pressed cancel and then turns off my computer. He tells me now when I go to the installation choose a place to put my new windows, and the only one there is C:. The problem is that there are already windows there. Remove the current patrician and then install it or install it even if it is already there. Remember, I want to just install Windows 7 once I get XP working.

  Thanks for all the help in advance!

  Hey Nub-Sauce,

  You can select the C: drive and try the install again. It will try to replace windows with the new installation of windows XP. Failure, then try to delete the current partition and try the install again.

  Note: You may lose the data stored in the system after reinstall, repair, or upgrade Windows XP.

  Links:

  How to install or upgrade to Windows XP

  http://support.Microsoft.com/kb/978307

  Upgrade Windows XP to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Computer froze during the upgrade/installation of windows xp

  I have windows xp home edition on a Dell desktop computer. I had problems with the computer freezing and then lost the connection to the internet 3 days ago. So I decided to reinstall windows xp from cd. However, I have chosen upgrade, rather than new install (because it was the suggested method). Now my computer will not complete the upgrade but is frozen during the installation. It remains to 32 minutes until the end. I can't seem to start, can't control/alt/delete or whatever it is. If I unplug my computer and launch it then again once, it resumes where it left off. How can I break out of this loop and start over with a fresh install? Thank you.

  OK, it would have been better to have all the information on this machine in one place. I guess your question in the other post you made about activation is for the same computer? If this is correct, then the information I gave you in your previous post is not applicable.

  With Dell computers, using Dell reinstallation media, you don't need to enter a product key during installation and the operating system is already activated.

  If you use a different XP installation disc that was not provided by Dell, this is why you are experiencing activation problems. If you do not have a Dell brand installation CD, you will need to use a manufacturer OEM generic system disk and use the product key on the label of CA certificate on your computer. If you use a copy of XP retail, you would use the product key on the CD to copy the retail case. In the case of the generic OEM drive, it must be the same version of XP that came with your computer (Home/Pro/MCE).

  All that being said, your sound of questions as a material. Did you leave all devices attached during the repair facility? If so, this can also cause the problem. Unplug everything except (obviously) your mouse and your keyboard when doing an operating system install. You should ensure that the material is solid before attempting to install again.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  Understand that all your data will be lost. If you save before, try to start with Linux Livecd such as Knoppix and copy the files to an external hard drive. Then download a utility from drive to drive mftr site. or use a third-party (Acronis Disk Director, Knoppix gparted) start Disk Manager to delete partitions on your hard drive and format the drive.

  Now, do a clean install of Windows, preferably using a Dell XP installation CD. Install Dell drivers for all your hardware when you're done, restore data from backups. MS - MVP - Elephant Boy computers - don't panic!

• After the upgrade and 'restart', with the first step, vista hangs in blue screen. memory dump. then restart windows, continues with the upgrade installation.

  This is the update installed.

  Update type: Important

   

  A security issue has been identified that could allow an authenticated local attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.

   

  More information:

  http://go.Microsoft.com/fwlink/?LinkId=179062

   

  Help and Support:

  http://support.Microsoft.com

   

   

  It's crash results.

   

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.0.6002.2.2.0.256.6

  Locale ID: 1033

  More information about the problem:

  BCCode:                                               d1

  BCP1:                                                    00000001

  BCP2:                                                    00000002

  BCP3:                                                    00000000

  BCP4:                                                    8056662A

  OS version: 6_0_6002

  Service Pack: 2_0

  Product:                                               256_1

  Files helping to describe the problem:

  C:\Windows\Minidump\Mini021710-01.dmp

  C:\Users\Robert B Benson\AppData\Local\Temp\WER-778569-0.sysdata.xml

  C:\Users\Robert B Benson\AppData\Local\Temp\WER147.tmp.version.txt

  Read our privacy statement:

   http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Some time after the closing of applications and stop, at startup, the system "says" there was an "unexpected", even if stop at the previous stop, 'things' seem close, hault and close.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not solve the problem, repost in the appropriate Forum:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Language of the system during the upgrade / installation W10

  I am a British expat living in the Netherlands.

  When I bought this system, I asked the vendor to install W 7 64 bit Pro English, which he did. Shortly after the installation of the system at home, he developed a hardware problem, which means that the supplier had to re - install the system.

  However, it has installed the Dutch version of the system. Because I had not the time (or energy), due to illness, so that the English system replaced, I have either. Now, with upgrading to W10, I dearly wish I could install the English language version.

  I understand that the upgrade software detects the current language of the system and uses the same language for the installation of the W10.

  Is there a way to get around this? Although I understand and speak Dutch, I find the use of the language in the system extremely disturbing and sometimes difficult to decipher.

  Looking forward to a positive response.

  Option 1: you may install the English Language Pack:

  How to install and change of languages in Windows 10 - groovyPost

  Option 2: Download and reinstall Windows 10 in the language of your choice:

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

• Upgrade installation will not work after replaced hard drive

  Have a HP machine that came with Vista. Bought an upgrade to Windows 7. Ran fine for several months. Then the hard drive failed. Installed a new hard drive. Partitioned and formatted. Windows 7 upgrade will not install. The only copy of Vista was on the hard drive crashed. A way to force the update to install. I have the license keys and the legal copies - simply nothing to install the first. Any help would be great.

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.