PSC 1317 printer

Similar Questions

• HP psc 1317 printer range

  My hp psc 1317 all-in-one printer/scanner/copier has developed problems.  It's an old printer that I have connected to my new pc hp pavilion g6 for laptop with windows 7 64 bit.  Since I replaced the color cartridge it prints a test page whenever the printer is on.  It will not print immediately, but he puts in a queue, even if there is nothing else to print and it prints 10 or 15 minutes later.  Images do not print, and colors tend to bleed into eachother.  It always worked perfectly before - is there anyone out there who can help me unravel it please?

  The page that it is printing is very probably the alignment page. Place the page on the scanner and the scanner. This should prevent this and determination of the quality of your prints.

• PSC 1317: Laptop disagrees with printer

  I have a HP PSC 1317.  It of a nice printer bit and has served me well.  But now my laptop refuses to argue with her, saying that there is a paper jam.  There was a traffic jam and I disabled it but my laptop always gives the same excuse.  The printer works perfectly well in copy mode paper and passes through without difficulty, but my laptop still refuses to have anything to do with it.

  How can I make friends again?

  Hi @TonyDB,

  I am sorry to hear of your printer and computer had a disagreement, I'd like to help fix the friendship between them!

  We will restart the computer and perform a hard reset. To do this, leave the printer and unplug the power cable for 1 minute. While it is unplugged, press and hold the power button on the printer for 10-15 seconds to release built his power, then after the minute, plug the printer in.

  Once both devices are o and ready once again, we will see that they will talk! Please let me know if you can now print. Thank you.

• HP PSC 1317 all-in-One Printer Windows 7 64 bit driver could not install

  Hello

  HP PSC 1317 all-in - One Printer driver Windows 7 64 bit does not.  I tried to install the driver after the incredibly long download (362 MB) to be told by windows that there is no driver.  I have uninstalled the software 3 times and reinstalled.  I unplugged, disconnected, re-downloaded and re-installed.  I downloaded the 64 bit vista drivers (they do not work).  I came to your site to seek support that is denied to me because the printer is out of warranty.  Unless, of course, I want to pay for it.  Which I did, after spending a considerable time (see above) trying to get it work on Windows 7.  Last thing to install on another machine, which I just do exactly the same result, and no sign of anyone else having the same problem everywhere.

  Now what can I do to get this printer to work?

  

  I solved this by using Windows update, which then installed a driver in the end.

  This was not a great experience.

  Why have a download for the version of 64-bit Windows 7 for this printer that puts all the other bloatware of HP but does not contain any driver.  Then you perform the update from Microsoft to get a signed HP driver?  Why can't the HP driver actually be content in the download presumed HP so you can Dodge all the crap software I just uninstall anyway.  A huge waste of time and effort.  Two weeks to solve a problem that should have been done in twenty minutes.

  Not good PR client on any level.

• HP psc 1317 driver not download

  my laptop is unable to download the driver for her pinter, but for some reason. Any ideas?

  Hello

  Check with HP Support, their drivers and documentation online and ask in their forums where he wiil
  for others with the same or similar model printers. As OEM HP is responsible for the proper functioning of
  the printer and their drivers provided.

  HP - PSC 1317 - be sure to set for your version of Windows.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=374584

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Installation problems for HP PSC 1317 - need help Urgent!

  My computer recently fell down, so I had to reinstall most of the programs to get it up and running again. I got no problems, until I tried to reinstall my MCS software. I have some big problems to reinstall the software and drivers for my HP PSC 1317. I tried all the solutions troubleshooting I can find on the site of HP. None of them work. I've also uninstalled and reinstalled the software from my original CD and the HP of many times website. The installation is not complete correctly and gives an error message (that I followed then upward on the HP site and followed without result troubleshooting tips) or when I think that the software is installed correctly, I can't open the HP Solution Center. Yet once, I followed the HP Web site troubleshooting tips, but still no luck! I can print and copy, but I can't scanner, which is particularly annoying, because I have some precious photos I want to scan in my PC. And Yes, I know that I can use Paint or a similar program on my PC to scan, but I want to be able to scan from my PSC 1317 directly as I used to be able to. I know that my COPS is old compared to most all-in-one printers, but it used to work perfectly fine for my needs. Help!

  Problem solved! I installed a 'clean' of windows version and then reinstalled my printer software before all other programs. It works perfectly now.

• HP psc 750xi: printer psc 750xi stuck in auto test and ink cart move.

  When you reconnect psc 750xi printer for the office, when it is powered on, psc 750xi printer is stuck in the self test and ink cart move. The printer is recognized by the computer so that it seems to be a problem with the printer. Diagnosis of HP is nothing. Restart the computer and the printer does not change. It worked before I unplugged.

  Hi @JMC30,

  Welcome to the Forums of HP Support!

  I see that your HP PSC 750xi all-in-one printer is stuck in a "free test and ink carriage will not move. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  It seems that there might be a power supply problem or there might be a hardware malfunction. Please, try the following steps to see if we can solve the problem.

  Try the steps in the order presented:

  • Unplug the USB cable.
  • Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  • Reconnect the power cable to the output of the printer and the wall, and not a surge protector. This ensures that the printer is full on and can help this situation.
  • Make sure that the printer is connected directly to a wall outlet (do not use a hub or a surge protector). This ensures that the printer is full on and can help this situation.
  • Connect the cable USB in once the printer has finished his departure without errors.

  If the problem persists, follow the steps in this guide: print cartridge error.

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• I have HP PSC 1610 printer, and until recently, it worked fine. Now it prints very slowly and I'm unable to use the internet, although it is printer.

  I have HP PSC 1610 printer, and until recently, it worked fine. Now it prints very slowly and I'm unable to use the internet, although it is printer. What could be the problem and how can I fix it?

  Hi Dee,

  Please contact Technical Support for assistance with your printer HP: http://www8.hp.com/us/en/support-drivers.html.

  Good luck!

  Kosh

• I don't know how to clean my heads of printer on my HP PSC 1200 printer

  I know there is a way to clean my printer heads and check my ink on my HP PSC 1200 printer but I can't.  Any help would be appreciated

  Go to the HP website and look in the KB or contact their support or look at the manual of the printer.

• PSC 2175 Print gray boxes behind the text

  Recently this HP PSC 2175 printer has been printing gray background behind all the text boxes.  It comes from occurring when printing from Windows, launching a test print to options for control panel of the printer, or clear text copy.  See the examples below.

  I have already been through a gambit of the typical diagnosis and determined that there must be something internal that is false because this behavior occurs even when the computer is not used.  This isn't a matter of dirty heads print or alignment.  The HPPSdr.exe did nothing, but check that the printer works.

  Any suggestion would be appreciated.  Thank you

  Windows Test page

  

  Internal Test page

  

  Hello LB.

  I sent a PM, let me know what happens.

• Printer all in one HP PSC 2175v prints the page number and the title of the document

  Printer all in one HP PSC 2175v prints the page number and the title of the document.

  This is the default value?  Can I disable this?  I would prefer to print only the document, without page numbers and the title.

  I was printing of either Wordpad specifications, using Windows XP.

  Using the front panel of the printer, I loaded the defaults of the printer, and that fixed the problem.

  Thank you

• Is there a cable that goes from my hp psc 500 printer to a usb port on my computer.

  Is there a cable that goes from my hp psc 500 printer to a usb port on my computer.

  Hi there dcjoe,

  Many places carry the cables you are looking for. If your region may vary, I found them in places like radioshack and wal-mart. To start, here's a commercial for google link . Let us know if that helps.

  Good luck!

• How to stop a test print page whenever the HP psc 1315 printer is turned on?

  Everytime I turn on my HP PSC 1315 printer automatically prints a test page.  How can I turn this off?  At the same time, I was able to print or copy without a first printing test page.

  I also have Windows 7 ultimate installed with a HP PSC 1310.

  He kept printing an alignment at each start page, so I downloaded and installed the installer of HP PSC 1315 all in one series printer:

  Link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1&cc=us&DLC=en&LC=en&OS=4063&product=374568&sw_lang=

  This download works for the 1300 series.

  I ran the printer align cartridge utility, page printed, put in the scanner and used the button "scan" as the 'OK' button and it solved the problem.

  Thanks for the tip of the "scan" button

• Cannot print from the HP PSC 1200 printer

  My HP psc 1200 'prints' a blank page.

  I am running Windows 7 on a Dell computer about 4-5 years.

  Printer worked fine until the other day when he stopped to find info from the printer.  If this is the problem?

  It would not be completed "suppression."

  I tried uninstalling and reinstalling, but no luck

  When I refer to 'all documents' and 'test page', it will not display order.

  It indicates also 'offline '.  What is the problem?  How she came like that, and how can I get to print "on-line".

  TIA

  Giborah

  Original title: unable to print

  Hi Giborah,

  Thank you for your update on the issue.

  I'm glad to know you found the cause and solved the problem. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows. We will be more than happy to help you again.

  Thanks again for sharing!

• HP psc 1210 printer v all-in-one

  I'm missing a driver for my hp psc 1210 printer v all-in-one.

  I can't print from my desktop pc to Windows 7 on my printer.

  Printer works very well to plug into the wall for printer - will make copies just fine.

  Computer added my default printer - that part is fine.

  When I try to print from the computer to the printer, I get a message saying the printer is waiting for 1 document waiting to print, but it will not be printed.

  I tried to unplug the USB cable and plug it into another USB port, but it does not work either.

  Tried the Printing Troubleshooter?
  http://Windows.Microsoft.com/en-in/Windows7/open-the-printer-Troubleshooter
  If this does not help, try this procedure by Arthur Li [MSFT]:
  Clear printer spooler files and activate the Spooler Service
  =================================
  1. click on start, type "Services.msc" (without the quotes) in the search box and press ENTER.
  2. double-click on "Printer Spooler" in the Services list.
  3. click on stop, and then click OK.
  4. click on start, type "% WINDIR%\system32\spool\printers" in the search box and press ENTER, remove all files in this folder.
  5. click on start, type "Services.msc" (without the quotes) in the search box and press ENTER.
  6 double click on "Printer Spooler" in the Services list.
  7. click on start. In the Startup Type list, make sure that "Automatic" is selected and click OK.