PSC 2410 printer problem

Similar Questions

• on the use of the printer HP psc 2410 photosmart problem and how tackle his problem.

  I refer to the last printer I bought - the HP psc 2410 all in one Photosmart model

  For the collar of the sixth month, the printer worked fine. But just recently, this printer has started quite annoying: once the printer has been started, the hourglass didn't stop and noice

  not moving part was also quite annoying:

  I had done in different ways, but it could only worked once. But whenever I'm past printer off and restarted the machine, the same error occurred.

  1. I have reinstall the printer driver, swap the USB port - worked once, but fail after I restart the printer

  2. make my computer from Windows Vista system recovery.  It has not yet.

  3. I turned off the main Reuther and modem also power on the computer and restart the power.  It worked once, but the next morning, I again, she didn't.

  4. later approach, I did: I let printer to launch everything first, now it works. But I'm really scared to turn off, I don't know if the same defective would return.

  The printer is in Malaysia. Previously, when devices HP Singapore or even China, there was no this problem. Hope that all users able to

  help or better is for the company to respond to my problem.

  Please see my post about it.

• PSC 2410 installation problem

  any ideas on how to solve the PSC 2410.unable installation problem install psc 2410 due to failure to the requirements of the system administrator. I am only one user on Windows Vista PC

  I'm sorry you have a problem with the installation of the printer.

  Here is a link that can help you with this problem.

  http://support.HP.com/us-en/document/c00808543

  Let me know what happens.

  You can also restart the computer.

• HP PSC 2110 printing problems

  I can't get my HP PSC 2110 to print properly with Windows 7.  It prints very well when it is attached to a PC running Windows XP.  All I get with Windows 7 is white pages, or a page with a few words in my document in very large characters.

  Did you follow the instructions here:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01796879&LC=en&DLC=en&cc=us&OS=4062&product=79488&sw_lang=

  This driver is installed? It should be included amongst the "HP psc 2100 series" in the printer properties. If this is not the case, go to the Advanced tab, then in the driver box, click the arrow next to the listed driver and see if there is something else. If this is not the case, click new driver and select HP in the left column and the 2100 series driver in the right one.

  After checking the correct driver is installed, print a test page. Is it OK?
  If so, print a document with that you have problems. If this is not correct, check the printer settings in this program to confirm that a large font size is not selected, the scale is not at 125%, etc..

  SC Tom
  -There is no such thing as TMI if you request technical support.

• HP PSC 1510: Printer problem

  My printer prints an alignment page, whenever I turn it on. I have downloaded/installed the latest drivers, no help.

  How can I fix this. It didn't happen when I was connected to a pc with an earlier operating system.

  Alignment again if it does not.  After the alignment page is printed, it must be placed on the scan scanner glass and press.  Try the following:

  1. Turn the printer off, wait 30 seconds, then turn the printer.
  2. To print the alignment page.
  3. Unplug the USB cable from the computer to the printer.
  4. Load the page alignment on the bed of the scanner, and then press the scan button.  The power light will blink while the analysis ends.
  5. Once the completed scan turn the printer off and then back on.  If the alignment page does not print, the problem is resolved.  You can now reconnect the USB cable.
  6. The page always prints if maybe because black or color cartridge cyan portion will not print correctly.  In this case, check the ink levels.  If they are OK, then perform a printhead, cleaning cycle.

• PSC 1410 printing problems, no errors but printing is delayed and often deleted

  Hello
  It's about a year since the printer is faced with these problems:
  -Whenever the printer is turned on it prints the test page (seems to me that it remains in the memory printing process), this occurs even when the PC is not connected
  -Whenever you ask to print a document, the process is pending, but printing does not start actually, it happens sometimes that spending a few minutes (or 20), printing is successful.

  Power cord and USB are fully functional;
  The copy function and the scanner works perfectly.

  I already tried to uninstall the drivers and install the updates, but problems remain.

  Now I am running Windows 7, but problems occur also in the printer connected to another computer running Windows XP.

  What could be a possible solution?

  Thank you very much

  Hello

  I have seen this before, but on some other products.  The solution seems to be "complete alignment" piece of printer setting.  I've attached the link to the document.  See if that helps...

  http://support.HP.com/us-en/document/c00473766

• PSC 2410 - How do I clear the fax report

  I have a HP PSC 2410 printer all-in-one.  I can not find how do I clear the fax report.  Thanks in advance.

  The method described by HP worked.  Restore to factory default.

• Cannot scan HP PSC 2410 Photosmart 'all-in-one '.

  The function "scan" on my hp psc 2410 printer/scanner/copier/fax MACHINE used to work on my other computer running Windows 98 was, but I wasn't able to scan in Windows Vista.  The printer function works fine.  Is there a 'driver' that I'm missing?  Help, please!  I need to scan documents signed for my husband's business.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=au&lang=en&product=303753&

  Read the above. Re Vista drivers.

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with other questions of printer in Vista Hardware and drivers Forum above.

  See you soon.

  Mick Murphy - Microsoft partner

• HP PSC 2410 all-in-One - use in 64-bit environment of Windows 7

  Hello

  I've had this all-in-one HP PSC 2410 printer for a few years now and it has worked quite smoothly in an environment Windows XP Pro SP3 for the time.

  A few months ago, I bought a new computer system and went to the Windows 7 64-bit OS (not interersted in Windows 8 at all) and I installed the printer successfully and it works, the software suite provided with the printer on the CD will not install for this environment and so I have more access to the different Maintenance Options that were available in Windows XP Pro OS such as cleaning and fax options.

  Looking for something for Windows 7 64-bit operating system threw up two options - update driver and utilities Assistant tool.   After getting off the route to update the driver, no software suite was available, and in fact the update said that the driver has been installed by Windows 7 automatically.  This seems to be the case as the printer works very well in print mode, mode of scanning (in the desktop menu) and it detects SD cards in the slots.

  However, there is no software to allow me to fax or clean or do any of the other options available in the HP Suite provided on the CD.

  Down the utility road has downloaded me a file - HPPIW. EXE - look at my current installation of the printer and check with HP for updates.   After several attempts, the utility simply CANNOT find my printer even if it is installed, running and even windows sees!   No amount of recycling the POWER button or restarting the computer allows this utility to detect the printer at all.  It is installed via USB on PC family of 64-bit Windows 7 and windows updates current are always fully updated.

  I considering buying a new HP OfficeJet 8600 Pro Plus to use as printer family with Windows 7 system - and move this HP PSC 2410 upstairs to connect directly to my Office Windows XP Pro SP3 staff and use the original CD to install it.  My Canon IP4200 Pixma just die on my own PC, on the floor.

  However, until that I do this, are there any available software suite that could work in the environment of Windows 7 that would allow me to use the various functions such as fax and cleaning that were available under the old XP environment and gets through the CD?  As a result of software never updated for Windows 7?

  Thank you

  Lee James

  The UK West Sussex

  Hi BAW9DV,

  I can't wait to hear that you have questions.  While there isn't a utility software that will complete the desired tasks, maintenance can be completed from the front of the unit.  Windows also has a request for the fax from the computer so that may work with this device. See the information below which can activate the functions you want.

  Sending faxes:

  1 fax and scan Windows use

  A. Type Windows Fax and Scan in the search box

  B. set up Fax for use.  Click here to see the Microsoft documentation for usage.  Note: This is a 3rd party Web site. HP and I are not responsible for the content of this site.

  C. Select New Fax

  Front panel maintenance tasks:

  Running the print cartridges clean utility click here

  Setf-test page click here print

  Evaluate the test page click here

  Align the cartridges: press Setup, press 5, then press 2

  If you work around options are not acceptable the 8600 model would certainly meet your needs in comparison with this camera.  However, I encourage you to contact HP to see what upgrade options are available for this device. It will probably be another Photosmart design unit, but in many cases, upgrades are available at a discount to our valuable clients guaranteed.  Global coordinates can be found here.

  PS If you pass through technical support, remember to ask questions on packs.  Extended warranties may also be available at a reduced rate for the upgrade.

  I hope this helps!

• HP PSC 2410 Photosmart all-in-one printer SLOW printing

  All of a sudden my HP PSC 2410 Photosmart all-in-one printer has started printing very, very, very slowly. If at all. It took almost 30 minutes (1/2 hour) to print only 1 page word document. I am on Windows 7 OS.

  Dialogue problems says everything is fine. An attempt to print a test page was even worse. He printed only the top 1/4 of the race and that it was illegible.

  I ran CrapCleaner, Norton full scan and I was able to print for about a day before the problem returns.

  Help!

  Hey Rainbow7000,

  I also had problems with copy. I noticed that the missing parts were color text or photos. There was no indication that the Tricolor cartridge was low or empty, but I replaced it in any case and VOILA... print is returned to normal and fine everyting.

  I would have thought there would be some am indicator when the cartridge is low, but it was not.

  Thanks anyway.

  RenardB

• Not able to find driver Win 7 (64 bit) for printer "hp psc 2410 photosmart all-in-one. pls help

  While I insert the printer USB cable to the laptop, it runs the Windows Live Update automatically and fails in the final task, the installation of the driver. It says "hp psc 2400 series - has failed.

  Then I removed the USB cable, removed the device of "devices and printers", reboot the laptop and then tried to load the driver manually. But in the window "install print driver", I could not able to find the driver for my printer ' hp psc 2410 photosmart all-in-one ' for the operating system of Windows 7 Professional (64 bit) under the "HP" manufactured.

  Can someone help me get this printer driver to use the Win 7 (64-bit) operating system? Thank you.

  Thank you, Sean. It has not solved the problem. Instead, I got to know that this will work with the 'HP Deskjet 6980 series' pilot and his summer work after I chose that one through the configuration of the local printer.

• STOPED PRINTING ON HP PSC 2410

  I have a hp dv6700 PC pavilion, it was very although now it is leaving the impression with my HP PSC 2410. I deleted reinstalled and it errors out when you send a file to print. The printer will be fax and copy very well. Cannot print from my laptop. What can I do?

  Hello

  I suggest you try to install the latest drivers for the imprimante4 and check if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  For more information, see this link:
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  It will be useful.

• Problem scanning HP PSC 2410 Photosmart in Windows 8

  I have a HP PSC 2410 Photosmart all in one that I can not scan.  I use a laptop Sony VAIO T series of ultrabook.

  When I push the scan button I get a message 'scan options are not defined. Install or run software of device on the computer. »

  Printer works fine.

  Dear Eric,

  Here is a document which tells you how to scan in Windows 8:

  http://support.HP.com/us-en/document/c03460648

  There is no HP software to configure the scan button.

  I hope you find it useful.

  Greetings.

  If this answer was helpful and clarify or solve your problem, please mark the topic as resolved and click on my next star to indicate a kudo, thank you.

• Code internet printing HP PSC 2410

  HP PSC 2410 all-in-one

  XP Pro & XP Home - (2 lapstop - same problem with this printer)

  No changes have been made to the XP Home, just installed this printer on the XP Pro laptop and it's printing code.

  Hello

  I see you are having a printing problem of IE. I suggest you to reset the settings of the browser.

  Reset Internet Explorer default settings

  1. open Internet Explorer

  2. click on tools

  3. click on Internet Options

  4. click on the Advanced tab

  5 locate the section reset Internet Explorer settings

  6. click on the reset button

  7. click on Ok

  8. restart Internet Explorer

  Try to print again.  If it prints normally let us know.

• PSC 2410 photosmart does not print after installation of OX 10.6 & Lion: message "failure to communicate".

  I just installed Snow Leopard and Lion (10.7.2).

  My hp psc 2410 photosmart printer repeatedly gives me the following message in the queue of the printer:

  Failure to communicate: the computer is no longer able to communicate with your printer. Turn off the printer, check your printer connections and look for errors in the printer and turn on the printer.

  I have deleted all the files of hp of the system library (suggested in an Apple forum), ran from the Apple software updates and recreated the printer queue in the printer preferences and Scan.

  What to do before having to run out and get another printer? Everything that I am interested is in the printing industry;

  analysis on this hp didn't happen for several OS updates.

  I appreciate the help.

  Hi again,

  I'm sorry to hear that the problem persists.

  Please, check the following:

  1. The printer is connected directly to a free port on your Mac OS and not via a Usb hub, extention, a port of Mac keyboard or through any airport base?
  2. Make sure that the cable is not more than 2-3 meters of length and directly connected to the Mac as described above.
  3. Try to switch to a different USB port on your Mac.

  If the problem continues without change, I suggest you try using another USB cable and then check for any progress.

  Although the printer worked fine with the previous Mac OS (as far as I can understand your description), any defective USB may react differently on another OS...

  Please let me know any progress,

  Shlomi