PSC 750 scanner failure error message

Similar Questions

• OfficeJet 6600: Office jet 6600 "Scanner failure" error

  I have a relatively new (9 mos old) Officejet 6600. When I turned on it today I got this error "failure of the Scanner: unable to scan, copy or send a fax."
  It is not connected to a computer or network, and is used only for the copy and fax.
  Help! It is in my office and we copy ASAP!

  Hi @wwah,

  Welcome to the Forums of HP Support!

  I understand that you receive an error message on the screen of your 6600 HP Office jet printer. I'd be happy to help you with this.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Here is a document that I recommend that you try, products HP all-in-one - a 'Scanner failure' Message is displayed on the all-in-one control panel and you can not scan, copy or fax.

  This paper addresses issues in which a "Failure of Scanner" message displayed on the printer control panel. If a different error message is present, follow the steps in the section "Some a software problem or connection when you try to scan?" to find a document that answers to your problem.

• 0xc19a0020 ink system failure error message

  Hello

  I have a HP Photosmart Plus, product # CN216, model # B210a. I'm running Mac OS X 10.7.5

  Today, I turned on my printer and got the error message "ink system failure 0xc19a0020 please turn printer Off and then on.

  So I did, but still got the error. So, I did the troubleshooting, which told me how to clean the print head. I've done 3 times, but I still get the error. I unplugged the power cord from the printer, then the wall, waited, then reconnected. I still get the error.

  I use the printer at least once a week, so he hasn't been sitting unused for too long.  I have not changed anything or whatever installed lately. The ink cartridges have ink.

  Anything else I can try? The replacement print head is $72!

  Thank you!

  Sorry, but generally, this can be a bad head of printing or bad cartridges. Here is a link that will help you with this problem, even if you did most of these steps.

  http://support.HP.com/us-en/document/c03081973

  If you have already replaced the front print heads and you return to this same stage, it would be a bad printer and maintenance needs.

• HP Officejet 6500 E709n: HP Officejet 6500 E709n - ink system failure error message.

  I have a printer HP Officejet 6500 E709n.  I get the following error message when I turn on the printer:

  'Ink system failure.  "Please turn printer off, then on.

  I then do as instructed and turn the printer off, but then the whenever I re - turn on the printer, I get the same error again.  The printer is now fixed to the top and none of the buttons on the printer works except the Power button on / off.

  Any suggestions on how to proceed?

  Hi @recooke,

  Welcome to the Forums of HP Support! I see that you can not use your HP Officejet 6500 Wireless. You get a printer fault to "turn printer off and then on again" you did without success.

  Please perform a hard reset:

  1. disconnect all cables and cards of memory in the printer.  Unplug the power cord, directly from the back of the printer when the printer is still on.

  2. unplug the other end of the power cord.

  3. If there is a power supply on the power cord, disconnect one end and reconnect it.
      
  4. at the end of 60 seconds, plug it directly into a wall outlet (not a surge protector or battery backup).
      
  5. connect the power cord to the back of the printer.
      
  6. the printer should automatically power back upward.  If not, turn it on with the power button.

  7. try to make a photocopy (if your printer is an all-in one) before you connect the cables from the printer.

  8. connect the other cables needed to the printer.

  It is recommended that the printer is plugged directly into a wall socket to ensure a uniform level of power.  Sometimes, when plugged into a surge protector or battery backup, the quantity of electricity is not received by the printer.  Power problems can cause printing problems.  It is particularly important to be plugged directly into a wall outlet with wireless connectivity problems, "sleep mode" and other power problems.

  Any change?

  If you still see the error, please check your Inbox. I sent you a private message on the Forums.

  Response with the result. I hope this helps.

  Just say thank you, please click the ' Thumbs Up ' button.

• install new printer Epson WF-2530, will not install scanner drivers error message ' could not launchrequired program during installation, check the installation disc, and then run the installation again.

  having a problem installing drivers for a new Epson printer scanner all in a WF-2530 on my desktop using windows vista

  error message "could not launch the required program during installation, check the installation disc, then re-run the installer.

  I managed to install the software on my laptop using windows 7.

  spending some time with epson tech dept, after several attempts to solve the problem, they advised that it was a problem with the microsoft software.

  have tried to install it on the internet from the site of epson, but same error

  any help would be greatly appreciated

  < have="" tried="" installing="" over="" internet="" from="" epson="" website="" but="" same="">
  Do you mean that you have downloaded the Epson driver?

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&infoType=overview&OID=209709

  Try using the wizard adding printer in the Control Panel, printers. In the wizard, select EPSON under manufacturer. If you don't see your printer in the list, click the Windows Update button. It will take several minutes (about 20) be patient, Windows updates the list. You should see a hard drive activity during the update.

  If that wouldn't work, try to run the System File Checker:

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files
  http://support.Microsoft.com/kb/929833?WA=wsignin1.0

• Remove and check color HP PSC 1610 printer cartridge error message.

  Original title: remove and check color cartridge

  My printer HP PSC 1610 rpet 'Remove and check color cartridge'. After that, I press 'ok' and the message still appears. What is the problem with the printer? Thank you.

  Hey cobra10,

  Fortunately, there is an article by HP Knowledge Base that talks about this problem. Please follow the solution provided in the article below to solve the problem.

  Remove it and check [color / black / photo] error message appears on the screen of control of product and the product does not print.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• C6180 ink SYSTEM FAILURE error message

  IF ANYONE CAN HELP WITH THIS ERROR MESSAGE?  FAILURE of the SYSTEM of INK 0xc19a0035

  I HAVE A C6180 ALL IN ONE.               IT DOES NOT RECOGNIZE THE FACT

  THAT I HAD REPLACED A CARTRIDGE A MONTH AGO... HP brand AND NOW GET this MESSAGE.

  I RE-SET, CLEANED ALL THE CARTRIDGES AND TALKED WITH HP ON THE PHONE 2 X.   IT WORKS AGAIN FOR A SHORT PERIOD, THEN THE INK SYSTEM FAILURE ERROR APPEARS AGAIN.

  HP said I need a new?   It worked very well until this and always does this for awhile after you reset it, so can't understand

  Why should I go out and get a new one for this problem.  I hope someone can help!    Thank you!

  IS NOT THAT DEMAND THE DAY 'EXPERT' OF AID?  HAVEN'T HEARD ANYTHING YET!

  This same error started on my printer and eventually it would power on and off constantly. Apparently some defective components were used in the construction of the logic board (see photo). My C6180 there were 3 defective capacitors (the Green cylinders - breathtaking top indicates failure) and a 4th from the same manufacturer (TEAPO - many web references unfavourable to this manufacturer). I bought 3 x 330uF 16V and 1 x 680uF 10v rated at 105 degrees Celsius (total about 60cents). On the logic board, the capacitors I replaced are labeled C613, C614, C660 and C662. If you are not comfortable replacing components yourself (or is not a soldering tool), you will need to find someone who will. The repair time should be less than 30 min - I did it in 25 minutes with only a solder pen. This also fixed the ink the printer was to have system failures. A similar fix may apply to other printers.

  

• Windows get '0 x 80246008' failure error message update, BITS 1290 error: 0x50a.

  Original title: windows update failed

  When I try to install the updates I receive the error message 0 x 80246008. I tried to fix this error with the methods I found on microsoft on the bits service, but when I try to start the Background Intelligent Transfer Service I get the following message: could not start the service background Itelligent on local computer Transfer Service. Error 1290: 0x50a. I tried to find a solution to this error, but found nothing. It's going to stop using windows update.

  Hey beginner,.

  It may be too late, but try this (I had the same problem):
  Go to %WinDir%\inf in Explorer (which is usually C:\Windows\Inf) and search for qmgr.inf. Right-click, and then choose install. You will need the Windows installation disk, although if qmgr.dll is %WinDir%\System32 then you can potentially point to this file. Let the installation finish. At this point, the name of the service is again Intell... not melt @%any..., but it does not work yet.
  Copy the settings of BITS ControlSet001 to CurrentControlSet key - installation INF does not create this key for a reason, or it does not for me to say.
  Now, open a prompt, cd %WinDir%\System32 and run regsvr32 qmgr.dll. A pop up should tell you that the operation was successful.
  Now you should be able to start the BITS service.
  I hope this can help,
  Morc.

• My Outlook Express is not send my emails or have the recoil of the false failure error messages... Who can help me?

  Spent many hours on the phone with technical support of at & t reset my email ID and password.  My mail to yahoo at & t sending and reception, but the same message generates a Mailer Daemon failure notice when sent from Outlook Express for XP. at & t said that there is a Microsoft bug that they cannot solve. Who can help me to solve this problem that just started last night after years of functioning? Please contact me at * address email is removed from the privacy *. Thank you.

  Why always a message in Oulook Express that the recipient of this message is not digitally signed, and then another one saying unencrypted and I click send anyway. How can I remove all this and just be able to send directly to who I want? When Outlook is genrating and alert error there are no detaisl provided on the error.

  Start over.  First eliminate interference antivirus (see www.oehelp.com/OETips.aspx#3).  After that go to file | Identities and editing and new identity.  Set up your e-mail account to the$ T, and then use the settings they specify on their website for OE and also told you to support.  (OE can connect and send to THE$ T, there is therefore no clear 'bug' with OE towards them).  See if it works then.

  Steve

• You have one (0xc) ink SYSTEM FAILURE error message?

  OK, I have an old printer (C6180 (Yes this old)) I had to put in stock for a long overseas military tour.  When I finally returned, I swapped the ink cartridges and get an error code of 0Xc18a0406.  It is not a removable print head, so I am at a loss to try to clean it.  Any suggestion or help would be appreciated.

  I wil send you a private message to something else, you can try.

• C6380 - 0xc19a0023 ink system failure error message

  
  

  Hi strainu.

  To try to resolve the message 0xc19a0023, try the procedure described in the document according to c01458034 Doc

  If this does not solve the problem - and the print head is still under warranty - then contact support phone for a replacement. To check if the print head is under warranty, see this page

  If the print head is out of warranty, see the link at the top of this page to buy one online.

  Hope this helps,

  Best regards, Ciara

• Receive message "Validation of C:\WINDOWS\System32\VSINIT.dll failure" error message when trying to run Cisco VPN Client.

  windows\system32\vsinit.dll

  I try to run CISCO "VPN Client" connect from my PC at home for my work PC.

  Then, I get a message:

  Validation failed for C:\WINDOWS\System32\VSINIT.dll

  Any ideas?

  Martin

  Hello

  Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)

  If the steps above is not enough of it please post your request in the TechNet forum for assistance: http://social.technet.microsoft.com/Forums/en/category/windowsxpitpro

• Problems to start Windows XP. I get "STOP: c0000218 {a resgistry file failure}}" error message.

  Original title: I'm having a problem when I start my xp.__It blue screen Watch window and wrote as details below:

  I'm having a problem when I start my Windows xp.
  It shows the blue screen and was written like this:

  {STOP: c0000218 {a resgistry file failure}}
  The registry cannot load the hive (file):
  \systemRoot\ststem32\config\software
  or its log or alternation.
  It is damaged, missing, or not accessible in writing.
  Beginning physical memory dump
  total physical memory dump.
  For more assistance, contact your system administrator or technical support group.

  Do you currently or have you ever had products Norton or Symantec installed and if so, which version?

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• A security update cumulative for Internet Explorer 9 for Windows Vista (KB2744842) failure error message: Code 80071 A 91. This update failed to be updated since August 8. How should I do?

  Hello
  Update of Internet Explorer 9 for Windows Vista (KB2744842) and update of security for Windows Vista (KB2712808). Doesn't have the error details: Code 80071 A 91.

  I can't solve this error that had been troubling since August 8. Can you please help.

  Thank you

  Please answer each of the following [admittedly tedious] diagnostic questions in a numbered list type in your very next answer (no need to quote this post):

  1. when (date about) don't you buy the computer?

  2. when (exact date) done, your Norton AntiVirus subscription expire?

  3. any other application (for example, Norton Internet Security) Norton or McAfee application EVER installed on the computer?

  4. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  5 are these other updates update listed in updates installed (not update history)? [1]

  (a) KB2722913, KB2705219, KB961501, KB2731847, or KB2736233;

  (b) KB2698365, KB2691442, KB2655992 & KB2719985 [or maybe KB2721691];

  (c) KB2685939 and possibly KB2686833.

  (d) KB2658846, KB2659,262, KB2660649,562, KB2688338 & KB2690533 KB2676;

  (e) KB2393802 KB2644615, KB2633171, and especially KB971029.

  6a. is the 7 Version of Java Update 7 (or higher) installed? TEST HERE in USING INTERNET EXPLORER (ONLY!)-online http://java.com/en/download/installed.jsp

  6 b. v11.4.402.278 is Adobe Flash Player (or higher) installed? TEST HERE in USING INTERNET EXPLORER (ONLY!)-online http://www.adobe.com/software/flash/about/7. Is Firefox, Chrome or any other alternative browser installed?

  7 is Firefox or another alternative browser installed in addition to Chrome?

  8 have you ever had the opportunity to do a repair installation or a clean installation of Windows?

  9. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. CCleaner Registry Cleaner)?

  ==================================================
  [1] start | Control Panel | Programs and features. See installed updates (in the left menu)

  [2] start | Control Panel | Windows Update | View the update history (in the left menu)

• Date of Intel Corporation - storage controller - Intel (r) 7 Series Chipset Family SATA AHCI Controller Installation: 1 / 6 / 2016 22:26 Installation status: Details of the failure error message: Code 80070103

  • 0 x 80070103
    Please give the solution for this?

  Hello

  Thank you for your response. I appreciate your time.

  I suggest you to refer to the link below and check if this is useful:

  Windows Update, error 0 x 80070103

  I hope this helps.

  Sincerely,

  Ankit Rajput