QDE.exe freezes

Similar Questions

• Explorer.exe freezes when Windows XP starts. Programs do not run but clickable.

  Start Windows XP.
  Click on I want to open an account.
  Type password.
  Windows desktop with icons appears.

  Start a hourglass when scrolling on her menu.
  Frozen, you won't fix.

  The Task Manager, end Explorer.exe
  Run Explorer.exe
  Freezes again but clickable for 2 seconds.

  All icons on the desktop clickable and says they are running but does not actually open.

  PC works fine in SafeMode w / networking.

  Help please,
  PC Professional, accounting files needed!
  SOS!

  The fact that your system works well in Safe Mode (w / network) indicates that a program run as part of your startup that causes this condition.  Safe mode is nothing else than Windows running with a bare minimum of programs and processes required to start your system (that is, all non-essential is cut off).

  This problem will be a proposal of chance.  You need start your computer Safe Mode and run a configuration manager (msconfig or autoruns) and disable programs that run automatically at startup, until you find the (s) which is causing your problem in a selective way.  First turn off non-Microsoft and programs that extend if necessary MS programs.  These programs will warn you generally if you try to disable something you shouldn't.  After you turn off some of them, you restart normally and see if the problem persists.  Once you find the program/process disturbed, the procedure is usually obvious as to the difficulty (usually UN-installing then re - install)
      
  Autoruns: <> http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx >

  Procedure using "msconfig".
  "How to solve configuration errors by using the System Configuration utility in Windows XP"
    <>http://support.Microsoft.com/kb/310560 >

  HTH,
  JW

• I can not write the new message of Windows Live Essentials due to the demand of Silverlight.configuration.exe freeze my computer. How to replace this command?

  Silverlight.config.exe. appears again msg then causes a gel

  I can not write the new message of Windows Live Essentials due to the demand of Silverlight.configuration.exe freeze my computer.  How to replace this command?

  Hi JaphetMorales.

  (1) did you change on your computer before this problem?

  (2) what operating system is installed on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  You can uninstall and reinstall Silverlight and then check.

  http://www.Microsoft.com/getSilverlight/get-started/install/uninstall-win.aspx

  See also:

  http://support.Microsoft.com/kb/977116

• silverllight. Configuration.exe freezes my computer

  whenever I try to get into Ebay, a dialoque opens with the messagae than "Silverlight.configuration.exe - prevents allow or not allow but I can't click on the option and it freezes my computer and I have to turn it off.

  Hello

  There are specific Silverlight Forums where they should be able to help with your problem.

  http://forums.Silverlight.NET/

  See you soon.

• Why csrss.exe freezes all other programs that are running when it is active?

  I don't know what to say here. I have an ASUS Intel duo Core Windows Vista OS and when I read the e-mail or watching Facebook, play WoW or just generally surf on the internet and the active process other programs freeze and I have to restart the program.

  I've read several channels that talk about the possibility of malware, and I have a current copy of Norton Antivirus and Malwarebytes, more I ran the quick scan of MRT and none of these show that I have a malware.

  Any suggestions?

  What do you mean by activation of csrss.exe? What program you restart?

  Csrss.exe is responsible for the separation and process and thread creation. I think that all activity on his part would be a symptom rather than the cause of the problem you are experiencing.

  This name has been used by malware to disguise himself. You can check if this copy is the real version of Microsoft looking where he was charged with the Task Manager. Go to view > select columns, look for the command line entry. It will show as C:\Windows\System32\csrss.exe if this is the true copy of Microsoft. Another thing would be malware.

  You can try to use the clean boot to diagnose the cause of the problem:

  http://support.Microsoft.com/kb/929135

• Windows 7 64 bit Ultimate - Explorer.exe freeze (AppCrash) constantly

  -Very well, Windows 64 bit Ultimate Edition here, clean install.

  I had this issue as well now (AppCrash Explorer.exe), BTW what does Microsoft on this one? You have a lot of reports about this in this thread, and if you do a search on Google also, so it is a GLOBAL problem. No showstopper bug, but doing the reputation of 'stable' of Windows 7 worth.

  It happens when:
  1. you copy / paste a single file or folder
  2 rename a file
  3 save a file with a text editor
  4 random

  Note: I'm a poweruser then please, do not answer telling me to "perform a clean boot" or simplistic answers as such.

  My configuration is very simple:
  ATI Radeon 2600 graphics card
  Intel Quad Core CPU
  Seagate hard drives
  Chipset Intel ICH7 (975 x)
  JMicron JMB36x controller

  Here's my question: according to all my research, this problem is especially on x 64 versions of Windows 7. And no, this isn't hardware related, because I had the same problem on 2 computers (fresh & clean).

  You want to settle this problem once and for all? Please let me know when you do.

  Change (an example of log events on this subject):
  The program explorer.exe version 6.1.7600.16404 ceased to interact with Windows and was closed. To see if there is more information about the problem, check the history of the problem in the control panel of the center of the Action.
  Process ID: 7f0
  Start time: 01caa2dfe0fa30d5
  End time: 32
  Application path: C:\Windows\explorer.exe
  Report ID: 07c07159-0edb-11df-a142-001e8c7e0499

  0000: 43 00 72 00 6F 00 73 00 C.r.o.s.
  0008: 73 00 2D 00 74 00 68 00 s. -.t.h.
  0010: 72 00 65 00 61 00 64 00 r.e.a.d.
  0018: 00 00 44 00 65 00 61 00... DEA
  0020: 64 00 6F 00 6 00 63 00 d.l.o.c.
  0028: 6 b 00 00 00 00 00 k...

  Thank you!

  Hello Zacchino ,

  It is always recommended that you take a backup of the registry before you edit the values, because incorrect modifications can cause strange behaviors and at worst could even damage your operating system completely, forcing you to reinstall Windows.

  We encourage you to try the registry changes, but only if you know what you're doing and if you do it carefully.

  The cause of this particular accident of Windows Explorer is related to SQM Client, which is part of the (CEIP) product improvement program. Under by default, where MachineThrottling is enabled in the registry, all calls to WinSqmStartSession in the ntdll.dll file will make Explorer crash, or Windows Installer installation to fail.

  So instead wait for a patch or an update from Microsoft, just remove and delete the MachineThrottling registry registry system entry. The MachineThrottling registry entry is located inside the following registry key: HKLM\SOFTWARE\Microsoft\SQMClient\Windows\DisabledSessions

  * NOTE * If you don't know what you do within the registry, to stop and not continue.  Ask for help who knows what they are doing and what you can recover your registry database if a failure occurs.

  To make it easy, you can simply create your own small batch with the following command file;

  reg delete HKLM\SOFTWARE\Microsoft\SQMClient\Windows\DisabledSessions /v MachineThrottling/f

  At this point, you can close the registry and right click on your file or icon, and you should be good to go.

  If that is not good so I think that you are only left with clean boot that Explorer.exe crashes usually are upshots of third party application conflicts and minimal boot is the only solution I can think.

  http://support.Microsoft.com/kb/929135

  Erwin

  I am not 62; I'm 16 with 46 years of experience... Think positive... Think Differnet

• CPU ankles 95-99% stuck on svchost.exe after that Windows update Nov 12 patches to not install

  Automatic update of Windows was put on 'On' on the morning of November 13, 2013, when I received the notice of Microsoft system tray that updates of Windows patches were ready to be installed on my computer (XP sp3, IE8, MSE).

  Updates proceeds to installation with the updated bars before the normal close.

  Updates is apparently blocked at the first update. I let it run for about 15 minutes before I made a hard stop. I thought that maybe I had lost to the Internet because the update seemed stuck on the first and took too much time, it seemed.

  Next start, computer slows almost stopped after a few minutes.

  Guilty is svchost.exe SYSTEM alternating between 95 and 99% of my system resources. I turn it off and computer returned to normal.

  Has done research on the web, stop automatic updates and processor svchost problem disappeared, unless I went to Microsoft updates and svchost.exe Web page re - would seem to consume almost all of the CPU resources while bars update Microsoft constantly scanned my system for the latest upgrades necessary.

  Spending a day to try various fixes posted on the internet. A Microsoft Fixit said that he there had errors in the update and fixed all but one saying registration number was bad (said he couldn't fix that). Despite everything, still the same problem.

  On the same day, an error was unable to update the definitions of virus on MSE, but for some reason, the next day (14) updated crossed.

  Update: some progress: I leave svchost cogitate on the webpage update from Ms. After about 1/2 hour, the updated hotfix list showed. I tried to install it, but not updates managed to install. I am currently re - try, as suggested on the Web page.

  Also tried the command "net stop" method mentioned in several places, as a tool of Malewarebytes Anti-Root running. Nothing.

  Tried the fix for IE8 security as suggested, nothing.

  Tried system restore, but I must have something wrongly configured with it because it was not able to restore any earlier date, I took. Bad luck.

  Never had a big problem with my set-up in all the years I've been running XP sp3, until now.

  Next thing I'll try is Park on the side of Windows Update for an hour or two, with the idea that maybe my processor is in need of more time to digest something.

  I see that others have had this problem, but not necessarily with patch release on November 12.

  UPDATE: some progress, perhaps. 1/2 hour parked page update of Windows, with SVChost churning away, and I got a list of patches. I tried to install, but all of them failed to install. I try a re - install, as suggested.

  Let me propose a summary of how to fix the MSE / Windows Update problem and the svchost problem:

  1st thing to do is to disable the automatic updates window. This will keep your computer against svchost.exe freeze for now.

  2nd, follow the instructions in Xircal to check that you have "BITS" listed in your list of "services". Correct it if not.

  3rd, IE remove it from your list of programs, and then reinstall it, making your first update of the IE rollup, as suggested previously.

  That he "should" do and you can activate the automatic updates on svchost.exe should return to normal. Proceed with the update of Windows and MSE as usual.

• Satellite A300 - Continuos HDD access with WinXP SP3

  I recently bought a Satellite A300 (PSAGCE) with Windows Vista installed: I resized the main partition of Vista and installed WInXP Sp3 on a new partition.
  Everything went well, thanks to the Toshiba support site full of work XP drivers.

  I noticed that randomly the HDD LED is on and the operating system is continuously disk access: this happens as soon as I open a new window of Windows Explorer, explorer.exe freezing and refusing to close the PC.
  But this is not the only cause of the problem: HARD drive sometimes starts to be consulted while I am using a generic application (this is not the same each time).

  I was thinking a chip or a problem of control of storage, but I installed the latest drivers of Toshiba/Intel.

  Any idea?
  Thank you!

  I think it's normal.
  Maybe you have a virus or your antivirus program scan the HARD drive. Check it!

  I could be that your HARD drive is faulty, but I doubt that.
  However, you can test with Drive Fitness Test (Google is your friend).

• COM1 printer: Crash "BEX c0000409" when you try to print

  HI :)

  It is the last option, before I reinstall the PC with the following problem, so maybe someone has a tip for me :(

  Since 3 days I have a problem with a PC Win7 Pro x 86:

  Soon I want to print a document to a specific printer (connected via COM1, it's a TS-PCLink Brady), the application that sent the work breaks down and the user the following information is displayed:

  Problemsignatur:
  Problemereignisname: BEX
  Anwendungsname: LM5.exe
  Anwendungsversion: 5.13.0.7
  Anwendungszeitstempel: 534a06f0
  Fehlermodulname: tlspcspl.dll
  Fehlermodulversion: 1.0.0.2
  Fehlermodulzeitstempel: 503f5536
  Ausnahmeoffset: 00004e1a
  Ausnahmecode: c0000409
  Ausnahmedaten: 00000000
  Betriebsystemversion: 6.1.7601.2.1.0.256.48
  Gebietsschema-ID: 1031
  Zusatzinformation 1: 092 has
  Zusatzinformation 2: 092a984ac019c718c90fa3b5919d8aca
  Zusatzinformation 3: 4 b 22
  Zusatzinformation 4: 4b22d1fd2de07b2a4fb4ab9baf47c8e9

  Read our Datenschutzbestimmungen online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0407

  Wenn die Onlinedatenschutzbestimmungen nicht sind, Sie unsere Datenschutzbestimmungen offline read available:
  C:\Windows\system32\de-DE\erofflps.txt

  Need translation? :)

  I can't find the problem. BEX and the displayed erorcode means something the DEP (Data Execution Prevention) is bad. But only for this printer.

  What I've tried so far:

  Remove printers

  Remove the printer package and driver through Printservermanagement

  Tried different drivers

  * Spooler reset (several times, through C:\Windows\system32\spool and registry entries)

  * Also tried two FixIts (Light and Full mode.) Only the Fullmode does not work as expected: it hangs about 90%?)

  * Because the problem is not specific to app (the application that sent the work, accidents, even if I just sent a test page via Explorer, then explorer.exe freezes :)) I don't see the problem in the original program, but I reinstalled it anyway.)

  * Removed manually from driverstore driver

  * Removed antivirus software

  * Reinstalled VC ++ and .NET (out of desperation, because I read something that displayed the error code has something to do with the VC ++ / .NET :)).

  * sfc/scannow without success

  * Installed COM-additional card through PCIe (like COM4): no change.

  I tried to do not (and don't want) to turn off DEP completely.

  Maybe some problems with the COM-management?

  Ideas? :-/

  EDIT: I tried new things:

  * msconfig: disabled all package services and startup items: no change. Between my multiple reboot and tent, the printer has worked 2 times. Next reboot: BEX-crash again... I can't imagine hwta will not...

  * Update the BIOS

  * Chipset update

  The TlsPcSpl.dll appears again caused the accident this tine with explorer.exe.

  Because the gdi32.dll appears on the battery make sure that the graphics drivers are updated.

  However, the printer driver may be the issue.

• "Could not connect to internet" Blackberry SDK (QNX Momentics IDE)

  Hello

  I'm looking to do a development of blackberry, but I can't get the SDK to update.  I get the message "Could not connect to" internet on the canvas when I start the SDK

  I checked my firewall settings and I added manually to the qde.exe in the exceptions, but still no luck.  Has anyone encountered this before? I tried to go to: help-> update API levels and I get: "cannot download SDK information."  When I checked the error log, I noticed this message: java.net.ConnectException: Connection timed out: connect

  My OS:

  Windows 7 - Service Pack 1

  8 GB Ram

  I had to enter the proxy information in the Preferences tab (Window - Preferences, then general-> network connections).  After you restart the SDK it worked!

• Native sdk installation problems

  -Downloaded SDK native gold

  -Installed on E:\BBndk

  -On the road

  Got "cannot start Java VM" has recognized this problem so I changed the configuration setting of

  -Xmx1024 to-Xmx512

  Eclipse starts ok. Get the message:

  "No SDK can be found. Install a software development kit to enable the Momentics features.

  Go to "Software updates" to see if I can download anything

  "No sites available.

  My guess is that any path is hardcoded in the installation program.

  Well, I can't use my C drive, it's a SSD only for Windows

  I am running Windows XP on a 4 GB machine. No problem running Eclipse with pre 10 Java runtime environment, which for several years

  Yes, the bat file make sure the JVM and IDE receive the correct parameters.

  Launch of qde.exe works on my machine. But this is the first time ever, I do this, and I've never had any problems on both machines.

  If you keep problems, my machines all have 8 GB or RAM, maybe that's too that.

  In addition, to enable the virtual memory on the machine you. It won't work without.

• Clean install QNX Momentics IDE but no. SDK can be found.

  I unstall the old version, delete the folder and install the QNX Momentics IDE in the default directory;

  When I try to create a workspce, it appears without SDK is located. Install a software development kit to enable the QNX Momentics features.

  Anyone has the same problem?

  Found the problem

  in the windows--> the Blackberry SDK native short cut tap

  C:\bbndk\ide\win32\x86\eclipse\qde.exe

  To take

  C:\bbndk\bbndk.bat (bbndk_admin.bat)

  Then the problem is resolved.

• Computer, freeze, and Microsoft Security Essentials scan stop on this file each time: c:\Program HP Imaging\bin\hpqthb08.exe

  My computer, one almost four years, Dell Inspiron 1454 with Windows XP Pro, continues to freeze when left to sit for a few minutes. Also, I discovered that when I run the Microsoft Security Essentials quick or full scan analyzing stops on the file HP Digital Imaging mentioned above several times.  I was wondering if this means something on the reason why the computer freezes up. Also, Windows Live Mail continually lets me know that it is "not responding." Yet once, I guess it's because of the freezing problem not Windows Live Mail is the cause. I do not know.  I made some different system using different dates restorations and who has not solved anything so far. I use the computer during a run without problem, but if I have a cup of coffee, for example, I have to restart when I return. Sometimes, the slider moves, sometimes not, but no matter the computer is unresponsive after that I took a break or just out of the blue when I try to open an e-mail or another task. I guess it's time for a Mac, but I thought I'd see if anyone has some ideas on how to solve this problem. Thank you!

  Hello, Olivia,.

  This problem is probably due to an outdated HP Digital Imaging monitor. Even if you decided to switch to a Mac, the question may still popup because you have installed hpqthb08.exe.

  Fortunately, there is an update that you can apply.

  SP26427. EXE

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-26169-1&LC=en

  Or you can simply disable HP Digital Imaging Monitor.

  How to disable HP Digital Imaging monitor.

  http://www.ehow.com/how_5896835_disable-HP-digital-imaging-monitor.html

  Good luck.

• My problem with freezing of documents is explore exe. have to ctrl alt del togetbackto Office

  My documents freeze when opening problem says explore exe please help an old fart.

  You first.  Tell which version of Windows you are using.

• Screensaver freezes. I have to type ctrl-alt-delete. Also, I get a message saying that explorer.exe is running, but no programs are running.

  Original title: help! MOM's computer

  is running "Vista Home Premium-service Pack2. Intel Pentium 4 CPU 3.20 GHz 2 GHz ram - 64-bit operating system. For some reason, not all the time, its 'images' Screensaver freezes and I have to hit ctrl-alt-del to reactivate the use of the computer. I noticed that when I make a new start, I get a message saying explorer.exe is running, but no programs are running. When I chose to turn it back on, restarting solves the problem... temporarily? until that (I don't know when) this 'explorer.exe' Decides to run again in the background? Advice?

  Hello

  Did you change your computer?

  Method 1:

  I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833