Document in color print in shades of red, despite the setting is grayscale

Similar Questions

• Shade of color shows ONLY shades of gray on the gradient layer...?

  My color chart seems to be defaulting to only shades of gray on a gradient layer, and I can just find a way to let him replace the color I chose.  After that I created a new layer of gradient fill, when I have the layer selected in the layer list on the right side of the screen, color samples show ONLY gray.  If I click on the sample, it brings up the color selector, but no matter what color I select, the swatch shows shades of gray.  If I select the background layer, it goes back to show my color.

  There's probably a simple explanation to this problem, but I was searching Google for literally hours without finding an answer.  I found some similar questions have the response "go to Image, Mode, and make sure that RGB is selected."  Mine is already set to RGB, so it's not the question.

  How can I change the colors in a gradient fill layer, and why my color chart displays grayscale only when I selected gradient fill layer, even if by clicking on the color chart reveals the color picker?

  To change/edit the gradient colors, double click on the thumbnail of the gradient in the layers panel fill

  Then in the gradient fill box, click just to the right of the gradient word to change the colors

  In the gradient editor, click one of the stages of the color at the bottom of the gradient bar and click color to change the color of this judgment

  There is much more to the gradient to the room Editor to explain on the forum, so you can view the following for more information

  Photoshop elements help | Gradients

  Using Photoshop | Gradients

  The reason for which continues to show your color in levels of gray, is the layer mask is still active with adjustment layers in photoshop elements and layer masks are grayscale

  Photoshop elements help | Layer masks

  

• 'Show Print tiling' has no effect despite the bleeding of document and settings reset in Illustrator CC

  I'm having a problem with the menu option "Show Print tiling" works do not at all.

  I have setup a bleed for my document and even tried a reset of the parameters.

  The dotted line indicates the area that your printer is capable of printing. So it depends on which is configured in your printer driver and the print illustrators dialog box.

• blue color 1518ni Colo laserjet hp gradually separates the characters even grayscale.

  I'm getting blurry printing and it seems that blue color shadow gradually separates in the text even when printing in grayscale. Is it an alignment issue curable, bad cartridge or what?

  Hello richpoirier,

  There are a few things that could be causing that. The toner cartridge is bad is certainly one of them. It could also be that the inside of the printer needs to be cleaned.

  Let's start with this troubleshooting article to see if it solves the problem.

  Solving print quality problems

• Reduction of red eyes with shades of gray on the face

  I used the reduction of red eyes and got the grey shadow son my face in the photo, how to remove?

  I used the reduction of red eyes and got the grey shadow son my face in the photo, how to remove?

  ===================================
  I assume you are using Windows Live Photo Gallery
  for editing? Back to the original version of the photo...
  Left click in the option "Cancel" until the unwanted
  Edit is deleted or until the gray option out.

  When you use the "Fix red eye"... enlarge the eye by
  Zoom with. Carefully drag the box so it only
  borders the red eye area. Releasing the
  mouse button activates the change. In some cases, you
  may need to use the tool 'fix red eye"more than once.

  If you make a box larger than the red area of the eye
  and if there are shades of red in the region of the face... they can
  be obscured. The tool detects red in the selection box
  but has no way of knowing if it's in the eyes or elsewhere.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• absence of dv6/PSC of color printing problem

  I have a dv6-6b91eo laptop core i7 and a machine to print/copy/fax psc 2100. The problem started a couple of days when I had to remove a piece of paper that had tied in the printer. I did a test run from the pc and only got a b/w copy. I thought that maybe the color cartridge had been damaged as asked me to remove the cartridges for inspection. I replaced the cartridge with a new color. I did a test run from the pc and only got a b/w copy. I then tried the copy function and it scanned and printed OK, color and all. So, what to do? Is there a software patch that can fix the problem? I Don t have an installation cd for the PSC, so if that's what is needed I must find it on the web, but where? Is it a pc or a printer problem? Any help much appreciated.

  Hi RnRMusicMan,

  Downloaded and run the HP and Docfor Scan print program, but he found no problem with my system, but after I did a backup copy of files on my external hard drive WD My Passport, and here the dv6 color printing capability has been restored after the backup! Also I have absolutely no idea how or why, but the printer works now dv6 o.k.! If you have no idea why this has happened, please let us know, I really want to know both why stopped dv6 color printing after only eliminate a jam on the psc 2210 (no changes have been made on the dv6 and scanning and printing color directly from the psc2210 worked o.k.) and why it has been restored after having made the back-up file. Very confusing to say the least. I will mark this as a solution, but I would really like to know why.

• Ho B210a photosmart horizontal lines color printing

  How to get rid of the horizontal color printing lines, even though I replaced the cartridges.

  Run 'cleaning print head' or 'print the State of quality' in the Tools menu of the printer.

• Our Deskjet 895Cse stopped in color printing.

  Our Deskjet 895Cse stopped in color printing.  Have changed cartridges, unplugged the printer, reinstalled the drivers with windows 7, lined up, cleaned and primed, checked to make sure that color settings on in the Properties window. Mystified.

  Even if the cartrdiges are new in the box, that they may have failed if they are very old.  The cartridges don't notexpir, but if they are very old, they can fail print one or more colors. Check the expiration of the warranty like him show.  If the cartridges are years after expiration of the warranty I guess that the cartridge is the question.  In this case, you can check by gently dabbing the nozzles on a wet tissue.  A good cartrdige would have a strong task of cyan, magenta and yellow.

• Black print cartridge registers is not on the right side of the page

  CP1215 has developed a weird problem! Recently replaced the black print cartridge (new, original HP).

  Printing a document in BLACK color, this isn't a problem. Crisp and clear impressions.

  Print the same document in color gives completely misaligned recording BLACK on the side RIGHT of the page. The side LEFT is clear!

  Printing CONFIGURATION PAGE confirms the problem. Registration of marks below on the LEFT are perfectly aligned.

  But on the lower RIGHT, all colors are aligned with the exception of black - the black line is much higher and offset printing to the right where it should be. That's why the color prints are all blurry on the right side of the page.

  Calibration several times running, check the drivers etc.

  Any help/advice is really appreciated!

  Hi Gemini02,

  Sorry about the long absence, but was busy with other stuff. More beat troubleshooting according to your last email.

  First of all, a few answers to your questions:

  1. don't know what the problem is. Don't want to start replacing immediately.

  2. all ink levels are more than 80%; Black nine.

  3. all the cartridges are original HP Black has been replaced recently, the other three provided with your printer.

  4. the paper is double-a premium, 80gr

  5 paper is set on the plain. Have you tried with the HP90 and light parameters too.

  After following your instructions of troubleshooting:

  6 printer moved closer to the wall outlet - it's a machine heavy tho!

  7 pressed & held green button. Config and supply status printed pages.

  8. print with other applications (Photoshop, Word, PowerPoint and Adobe Reader).

  Problem persisted. Registration completely to the bottom of the hand right side of the page and the worst in the lower corner straight out.

  Acts of desperation next, pure:

  9 deleted each cartridge, shaken several times on the axis horizontal and then triggered one end while decreasing the other and vice-versa several times. Replaced in the status bar.

  10. Ran HP Toolbox calibration.

  11. test print to Adobe Reader - same document as before. Substantial improvement!

  12. Repeat steps 9 and 10. Further improvement.

  13. Repeat steps 9 and 10 more. Almost no problem checking.

  14. Repeat steps 9 and 10 more. No record of the questions at all!

  Then, to avoid the location and power source:

  15. moved printer in its normal location.

  16 connected the printer to its normal power source - an extension of good quality.

  17. reprinted on the same page. No registration no questions at all.

  I have no idea why the steps 9 and 10 would have such an impact. And why repeating them would improve the print quality progressively until no problems are observable. I have detailed my action here in case they can help someone else.

  I thank very you much for the support and guidance you provided. If you have any idea why the repeated shaking and calibration solved this problem, I would be very interested! Keeping in mind I ran several times previously without success to calibration.

  Thanks again for your help.

• HP Deskjet 970Cse only prints red after the new color cartridge installed.

  HP Deskjet 970Cse only prints red after the new color cartridge installed. I use black HP 45 and HP 78 color. Both are new. I know the printer is an older model, but it works well a month ago.  Any help would be appreciated.

  Thank you for your help.  It was a faulty cartridge.  I pressed a white cloth on the ink source and only yellow and blue were visible, without red (magenta).  I've returned the fabric and cartridge in the store (with my receipt) and managed to get another canister... it worked!  Both cartridges have dates of expiry of 2016.  Glad I didn't have to spend time troubleshooting my printer.

• What is the best 'color settings' for documents 4 colors Photoshop 9.0 for eventual printing on a printer? Thanx

  What is the best 'color settings' for documents 4 colors Photoshop 9.0 for eventual printing on a printer? Thank you, Scott

  The 'best' color settings are profile and end points specified by your lithographer. You can see that the work will be produced in CMYK mode, it can specify a RGB. (One of the reasons why it might ask for an RGB file and perform the conversion itself is so that it can prevent its competitors its CMYK settings that apply to the GCR, generation of black [ramp] and limit of total ink regarding specific paper.) Its recommendation may also vary depending on your choice of paper and the surface of the paper. If the choice of the particular lithographer cannot be done at this time, it is generally acceptable to provide the Adobe RGB file with the default settings of Photoshop.

• text and line color print black

  We use CS3 on PC. When I put a line of color on my text and print Docucolour text and contour on my HP Laserjet or 260 color printer prints black. Obviously the Laserjet prints black only, but we should see the shades of gray and on the printer of color as well the type of red and blue print in black. Before I reinstalled Indesign or any other patellar reflex reaction, someone has any ideas? I can open the suspicious document on another machine and the type still print black. A note: if I make a pdf of the document and send it to the printer color, it prints correctly.

  There is a text printed as black setting in the print dialog box. Perhaps this is true.

  Bob

• OfficeJet Pro 8620:8620 all in one printer color printing incorrect, even if the quality is good on tests

  My printer is only about a year and I had no problem with him until more recently. I only use hp ink cartridges. It prints color orange when I want to print the colors pink and Red/pink when I want to print Brown. Most of the other colors print normally. I cleaned the print head, which does not help at all and made a print quality test, each test to come out totally fine. Colors are not dimmed, there are no missing lines or anything like that, it's just printing wrong colors from time to time, as on some documents. Any suggestions?

  Hi @mcorinn,

  Welcome to the Forums of HP Support!

  I see that you experience problems printing some documents with your HP Officejet Pro 8620 printer in Mac OS X 10.6. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand the frustration you feel. There could be corruption in the files/application on the Mac or a problem with the printer driver. If the 'print quality test' report print correctly, this is not a hardware problem.

  Are you able to print from TextEdit? What were the results?

  If some documents are the problem, they could be corrupted.

  What application you are printing from?

  Try to create a new document with the color to see if it prints correctly. What were the results?

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• A blue tint what color printing.

  Help!

  I have a HP Deskjet F4280 All - in - one for many years and had no problems until I recently replaced the color cartridge. When he printed the page after I did the standard set of alignment to the top, blue appeared on the scoresheet when he was red in the past. Now, everything has a blue tint and I do not understand what red, yellow, green or orange. Even print boarding proved to be blue to pieces when he should be orange.

  I have cleaned the printer cartridge and searched this forum, but without success. This printer has it?

  All the advice accepted with gratitude.

  Hello

  Try to remove the color cartridge, take a small peace of cloth and try to score the fabric on the lower part of the bloodsuckers.

  You see only a clear mark of colors Cyan, Magenta and yellow appeared while stamping ink cartridge?

  It's a genuine HP ink cartridge?

  You see one of the colors as expected by printing a self-test as follows report?

  http://support.HP.com/us-en/document/c01361419

  I suspect rather a faulty cartridge that a damaged printer as the print head is built into the cartridge itself...

  Please let me know the results,

  Shlomi

• HP Color Laserjet CP2025 print: color printing problem

  Had the printer listed above for several years and love it.  Have just started having problems with the printer does not print not not in color.  Have a recorded document that needs to be printed every month and have had no problems with it, until yesterday when it is printed in black only.  Another document word also printed in black only.  I printed a test page printed correctly.

  Don't know if there is a definition in the document, or is it a printer problem.  Help!

  Welcome to the community @mwillis HP

  I came across your post about the color printing problem and wanted to answer to help with my suggestions. Please see the guide below to resolve this issue.

  HP Color LaserJet - cannot print in color or impossible to Auto-Duplex (two-sided printing fails) after the installation of the UPD

  Let me know if you have any questions.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.