Qosmio F - is there a changelog of the BIOS?

Similar Questions

• Is there an update of the BIOS for Acer Extensa 5620ZG using windows 7 Professional.

  Is there an update of the BIOS for Acer Extensa 5620ZG using windows 7 Professional.

  Take a look at the http://www.acer.com/worldwide/ site there is only 1 listed BIOS so I don't think that there is an update.

• Tecra M5: Are there special precautions with the Bios upgrade?

  Are there special precautions he takes while uprading BIOS. I'm just afraid because both failover system report people after the upgrade, is it true?

  Hello

  Of course you need a few special steps if you want to update the BIOS!
  The update of the BIOS is risky! If you use the bad BIOS or bad BIOS update procedure, you may damage the motherboard or module ROM BIOS!
  This is why you should always read the details of upgrading the BIOS before you start the update.

  Finally and above all many people update the BIOS without any reason. That s is really stupid.
  In my opinion you should not update anything if you have no problems!
  Therefore, never change a running system ;)

  You know the technical knowledge of Toshiba?

  http://EU.computers.Toshiba-Europe.com-> download-> Knowledge Base & support

  You will find many useful documents and also the BIOS updated Details

• Qosmio X 500-how do to restore the BIOS?

  HY

  My Qosmio x 500 has worked (from the point of view of cooling), until I made a very big mistake. I did upgrade the BIOS to version 2.9 of the official website of the Toshiba and now my laptop stops in games after 5 min. Before this update, I had no such problem. I'm so very shure it's this BIOS version error.
  If someone can tell me how to restore the BIOS on Qosmio X 500, I'd appreciate it.

  Concerning

  Hello

  This BIOS downgrade option you want to say is not possible as on Toshiba site only the most recent version can be downloaded. Latest version of BIOS is also the most stable version if BIOS downgrade is not important.
  It is possible to the ASP.

  I can t imagine this new version of BIOS is causing this problem.
  You use the pre-installed Windows version with * original * Toshiba display driver (nVidia no)?
  Do you have a performance maximum cooling option in Windows power options?

• Qosmio F10 main board replacement - update of the BIOS etc.

  Hello

  I just installed a new motherboard on my F10-124.
  He was the P000415760 of PCB (part number P000454980) upgrade as the graphics card does not - again!

  Documents accompanying tell me to update the Bios, EC/KBC (parameters please) and write the new DMI. At the time where the VGA controller is not recognized, and no reader CD is listed.

  Can it be updated by myself, without having to refer to an ASP, as it is not worth the money if I do. I want to just use this as an additonal PC for my daughter.

  No doubt I should be able to update the Bios from a download or something from the toshiba support site.

  Any help appreciated.

  I found a utility to Update DMI PC Toshiba laptop Toshiba U.S. page.
  You can try this
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/downloadDetail.jsp?soID=1008299&PF=true
  But generally, this should be done by a Toshiba ASP so if the utility would not help you, you will need the assistance of a Toshiba ASP.

• Satellite A210 - 16G (PSAELE) - how to use 4 GB and update the BIOS?

  Hello! I hope someone can answer a few questions for me.

  First of all is: How can I turn on my laptop to use all the 4 GB of RAM? OS is Win Vista Ultimate 32-bit with Service Pack 2. Now Vista all show the 4 GB of RAM, but don't use it. I activated the EAP in Vista, but still nothing. As I saw, I need to turn it on too memory remapping in BIOS but there is no option (my BIOS is ver.1.70).

  The second question relates to the BIOS. Because my version is 1.70 and there are more recent version 2.00; I get benefits if I update to BIOS? Someone has updated to version 2.00? And there are more options in the BIOS after update to version 2.00 (for example the memory remapping or a similar option)?
  I'm a little afraid to update BIOS, because sometimes my Toshiba freezes, and I would not hang during the update of the BIOS.

  And the final question is there any changelog to the BIOS? So I can see what is added and changed, and what's new in the new version of the BIOS. Because I could not find anywhere.

  Thanks for the responses to come.

  Hello!

  (1) you can use the entire 4 GB of RAM on a 32 bit OS. It is a due limitation of 32-bit technology. Windows Vista with Service Pack 2 may recognize the full 4 GB of RAM but not use it, more than 3.2 g.
  Here you can find more information about this limitation:
  http://APS2.toshiba-tro.de/KB0/TSB82022E0000R01.htm

  (2) about BIOS updated I can tell only must be made only if you have problems with the laptop. A BIOS update should never be done just for fun, because it of still a little risky. In the worst case, you can destroy the ROM module or complete motherboard.
  Update the BIOS doesn't normally contain new features or options. It s bug just setting. In addition it can t solve the problem with 4 GB of RAM and Vista 32 bit if you think that ;)
  If your laptop does not have 100% stable you shouldn't t update because it s too risky. Before the update, you should try to solve the problem of gel.

  (3) If a change log is available you can find it on the Toshiba site. If you can t find, there isn t available.
  That s all about this.

  I hope I could help a bit.

  Good bye

• Can not enter the parameters of the BIOS on Qosmio F60 - 147

  * Hello *.
  * Please could you help.*

  Toshiba Qosmio F60-147 have a brand of laptop. Yesterday, I wanted to put a password on the BIOS and the field "Set supervisor password" save the password I wrote and I recorded went with the F10.
  But then I want to enter is F2 during startup to restart when I press. I can't enter a kind of is. But I still can't connect is Bios Update. We don't have a problem with the windows open on my computer that I use without problem. Is why not glue only one question. ?

  * I turned on the computer, I press F2 until the Qosmio logo, but I can't enter the bios and resumes.*

  When you start your laptop can see you in the lower corner of the message display press F2 to enter the BIOS...?
  What happen exactly when you press the power button / stop?

• Changing the settings for Port in the BIOS on the G20

  Hello

  I need to change the port settings in the BIOS as EPP, ECP etc for a printer. But when I go into the BIOS on my G20, there is no option for this. If I can't change these options, so I can't use my printer.

  Does anyone know if there is any way to change these settings, or if there are updates to the BIOS will fix this?

  Hello

  On which port you connected the printer to your Qosmio?

• Satellite Pro L300 - which improved after the BIOS update

  Hello users,.

  I just finished an update of the BIOS on Satellite Pro L300 using Updater Insyde Bios. I tried the Toshiba site to see what's new or what has improved since the update my bios 1.7version v2.2. But there is no search results. I also went to the site Web Insyde, but neither have they put up what has changed or improved?

  Is there a documentation or information which could help me to know how my laptop has improved or better after the update of the BIOS and what has changed since my update of the BIOS?

  Thank you

  Hello

  I assume you mean a changelog of the BIOS. Well, normally this document is placed on the Toshiba page where you can download the BIOS update.

  If you can't find such a t changelog, there is no available changelog. All that s!

  In addition the BIOS update should be performed only if it of really necessary. This means that if everything works fine, I don't see a reason to update because this update is a bit risky.

• Satellite U400: How to set the BIOS password & learn how to use facial recognition

  I have a Satellite U400 Satellite.

  Can someone direct me to a link of support for the implementation in passwords in BIOS?

  There are several options and I don't know what does what...
  Thanks for your help...

  Another point:

  I feel that the definition of a password or both in the BIOS will help the face recognition program to work, for some reason any.
  I NEVER managed to properly configure that, although I tried several times,
  go in accordance with the instructions.

  A lot of frustration and time, I would say.
  This is for safety.

  > Can someone direct me to a link of support for the implementation in passwords in BIOS?
  If you want to set the password in the BIOS you will need to access the BIOS by pressing the F2 key immediately after that the laptop has been powered.

  There is a 3rd tab security.
  There you can set the BIOS password. You would need to put everything first and then you must confirm the password once more to

  > I have the impression that the definition of a word or two in the BIOS will help the face recognition program to work, for some reason any.
  This s the password of BIOS nonsense has nothing to do with the reorganization of face.

  Here's a very useful thread that provides details on the reorganization of the face:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=147434

  Check it out. It is very useful

• Satellite A100-756: no option in the BIOS to change the CPU usage

  Hi guys,.

  recently bought a satellite A100-756 laptop with core duo of intel clocked at 1.86 Ghz. When you look in the BIOS (version 2.00) the only options allotted to me is to dynamically the CPU frequency mode are 'always low, or dynamically switchable. There is no option to set the processor to operate at "still high". my friend who has a 2 years old satellite said that, on its model, there is the possibility to "still high".

  Toshiba HWSetup also lists only the mode options for dynamic as either «always low or dynamically switchable» cpu frequency I was wondering if anyone has done to put the option to always high, or if there is an update the Bios or software Toshiba that would allow this option for 'high alyways?

  Congratulations for all help people!

  Hello

  As you may knew that the Toshiba Power Saver tool is preinstalled on most Toshiba laptops.
  This tool allows to change the CPU, the speed of processing, cooling method, using standby and hibernation, etc.

  To change the speed of the CPU or the cooling method, you will need to enter the energy saver, then select the basic settings tab.

  PS: All these settings can be configured for a different power profiles. Therefore, you must configure the settings of the profile that you will use for most of the time.

• Pavilion P7-1510: Get to the bios to enable impossible to reinstall

  I had a failed HARD drive and put a new one in but cant boot legacy options (DVD) I guess because the inheritance is not enabled in the bios. It is, all that I can see the bios info is not true bios. The f2/f10/ffffff type shows only information. Even escape will look at the boot options, but the legacy is not there. Is there a lockout on the bios?

  Try this link

  http://support.HP.com/us-en/product/HP-Pavilion-P7-desktop-PC-series/5330777/model/5331427/document/c03489643/

• Need to update the BIOS

  Lenovo x 201 3249cto, 4 GB ram, 128 GB SSD, win7 64-bit

  Is it better than BIOS upgraded when the new Version of BIOS is made available?

  My installed Version - the 1.23

  New Version available - 1: 31 (do not have)

  Also, what is the easiest way and install upgrade the BIOS if necessary?

  If your laptop works well, then there is no need the BIOS upgrade.

  JMT

• Qosmio F30: Is there a way to get the remote to work directly with built in receiver

  My remote control Media Center only works when I plug the Receiver USB on my Qosmio F30 yet will work directly to the laptop with the vista media center pre program.

  Is there a way to get my remote to work directly on the built-in receiver?

  Steve.

  Hi Steve

  There is unfortunately no way to do it. Qosmioplayer is also part of the media offered by this book, and as you know this small Linux based application runs without booting the operating system. Due to this USB port can not be used (external receiver) and because of this one way remote control with Qosmioplayer is infrared receiver window.

  I'm not a technician and can explain you why this little infrared window is not used with the operating system running but, I'm sure, there must be a technical reason for it. Anyway, there is nothing to do, and you have to live with it. :(

• Qosmio X 70-B-102 - how to enter the BIOS

  Greetings.

  Just a simple question. I think so.

  How in the BIOS of my laptop? Boils usually to press the Functionkey right (or combination of both) during the startup. My problem is that when I start my Qosmio, I don't see a message that tells me which key support. Can I be missing something (each time?), but I do not.

  I read the documentation that came with my laptop when I bought it, but couldn't find anything out there on how to enter the BIOS.

  Any info is greatly appreciated.

  Willem.

  Most of the settings can be modified from the Toshiba Control Panel utility, if you really need access the Bios here is the procedure on windows 8:
  http://www.eightforums.com/tutorials...ndows-8-a.html