Qosmio F10 - can't watch TV in other countries

For the moment, I'm temporarily living in Slovakia. I tried to watch/install their TV network in the qosmio without success. Yes, I chose not the country. All I get is "No signal." I look at a standard through the Ariel even though TV what is the problem?

Hello

Unfortunately, as far as I know it of not possible to watch TV out of country where the appliance was purchased. I found an info only after update driver QosmioPlayer you can change the region of TV under QosmioEngine, but not yet under Windows XP MCE.
Please check these other topics:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=3825&MessageID=12427#12427

http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=5766&MessageID=20084#20084

Good bye

Tags: Toshiba

Similar Questions

  • Can be used dash in other countries except USA or the Canada?

    Can be used dash in other countries except USA or the Canada?
    What it the question...

    Laughing out loud

    http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1017668

    "The failure to authorize: missing Mode XAPI Service error message appears on the display of the dash personal Internet Viewer if the device detects that the network connection is from outside of the United States or the Canada."

    At that time, the Dashboard Viewer is not taken in charge outside the Canada and the United States. »

  • Qosmio F10 can't burn DVD + R

    I cannot burn DVDs. I seem to be able to burn a DVD - RW OK and I was able to burn a DVD + R gift, I had, but with the pack of Philips DVD + r, I for the moment any attempt to burn the ends in an error, the software I use for burning, for example, Media Center, WinDVD Creator, Roxio MyDVD Studio. Does anyone else have this problem. I'm doing something wrong?

    Hello

    I think that the cause of your problem are the DVD itself. DVD players are unable to handle all kinds of discs. They work with the right manufacturer discs. But Philips and other labels do not produce the disks, they buy them all. And there is no way of knowing who has really produced the records. So, you can try just serveral labels to find the good DVD. If you remember the label of the DVD + R, you burned, you should start with this one. But there is no guarantee that the disks of a label always work. The manufacturer may have changed.

    It's an unfortunate thing, I know.
    Good luck!

  • Qosmio G50 - can I use infrared to other devices?

    Anyone could use before infrared receiver for other devices other then the remote control?

    I'm doing it recognize my phone and my Polar HRM but so far without success.

    What I see in Device Manager is appears as a device "Winbond" but it is also "eHome" of the WMC remote device?

    FIR (Fast Infrared) is rarely more because its very slow, requires line-of-sight and was replaced by BlueTooth.

    The G50 has a CIR (consumer IR) port that is not compatible with the devices of TREE. CIR is essentially just used for remote controls.

    Then you must either buy a fast USB infrared adapter, or you must use USB or Bluetooth on your device instead.

  • Can't watch any kind of videos

    Welcome guys.
    I got really annoying problem.
    I can't watch yt/vimeo/other video streaming sites.
    I tried refreshing browser/reinstall/start without Add-ons.
    I have same fresh windows stock for it.
    And I have no idea why I can't watch them...
    I have error (attached screenshot) or http://puu.sh/jPKCQ/4e5e625f1b.png
    I have 8.1 x 64 on lenovo computer y570 laptop.
    Any kind of help will be really appreciated.
    Concerning

    FIXED!
    True Media.MediaSource.WebM.Enabled
    Media.MediaSource.MP4.Enabled True
    Media.fragmented - mp4. * to true
    Media.fragmented - mp4.use - white-decoder false

  • Qosmio F10: No IrDA in Device Manager

    Hello

    The IrDa device is not in my device manager over on my Qosmio F10, can someone please tell me how to get it back.

    Hi Ronnie

    I found some information about the Qosmio F10 and the IrDA is not available on this device. In this case, you can see t the IrDA in Device Manager and it s not possible to activate this function. :( Sorry

    Best regards

  • Qosmio F10 - a few disruptions, watch television in the Media Center & Qosmio player

    Hello

    I have a Qosmio F10.
    The motherboard died and was replaced by Toshiba with a new saw 915 chips.
    I was watching TV in media library and Qosmio player with no problems.

    But recently, I noticed that after playing for awhile, the TV has a few disruptions.
    The video is not yet clear, but the screen has vibrations (for lack of a better word).

    It's like when you watch TV on low voltage. I thought that it may be due to dump excess files and temporary files. So I deleted them.
    It seems to work very well so far, but I wonder if it's because of the RAM.
    His only 512 MB. Should I update? If yes then how much.

    Thank you.

    If the manual says this, then it could be possible that this is the cause
    Sorry, but you can find using only the notebook with the settings and accurate portrait of Toshiba.

  • Qosmio F10: Edition of USB-mouse - how can I reinstal drivers USB port?

    Hello

    I am the owner of a Qosmio F10 with Win XP MCE.

    I have recently encountered problems with my USB ports I have 3 in my computer. It began with one of them and has now spread to the rest of them.

    The problem occurs especially with my mouse. The mouse freezes and sometimes I hear the alarm which is generally issued when disconnected a device. Sometimes it restarts seconds later and sometimes I have to physically unplug my mouse and plug it back in to restart.

    The problem also occurred with other devices that is my Ipod.

    The problem could be related to lack of memory because it seems to me see more during the execution of the programs such as Photoshop, Illustrator, InDesign, Flash, etc., however I can't say that for sure.

    Can I reinstal the drivers for the USB ports? I tried reinstalling my driver of mouse, with no effect.

    Please note that I cannot go into 'Control panel' I get an error message and closes the window.

    I hope someone can help me.

    Best regards

    Green tentacle

    USB drivers are part of the Windows operating system. 3rd party USB drivers don t exist!
    What you could do is to disconnect all USB devices and could remove the USB ports/hubs/controllers in Device Manager.

    Reboot the laptop.
    After restarting again the operating system should recognize and install again the USB ports.
    This accelerated procedure should help you

  • Qosmio F10 Fan - where can I order one?

    Hello

    Anyone know how I could find the part number of the fan without microprocessor (I don't know if it's a GPU fan or what, is one of the more toward the Center on the laptop) for the Qosmio F10?

    I found the part number of the fan CPU (P000388590), but it is a different size. Also is there anywhere in the United Kingdom, I might be able to buy the new fan without having to send my laptop? I can only find sites in the United States that sell the fan from the CPU to the end user, so the same could be true of this fan.

    You have a command parts compatible Toshiba service partner in your country.
    I guess that it s also able to control the compatible fan.
    The link to the page with the ASP database gave a lot of time here in the forum

  • Qosmio F10: How can I install Win XP MCE 2004 again

    Hello

    I have a problem with my recovery dvd - rom supplied with my laptop TOSHIBA QOSMIO F10. I bought in London, message of cams of upward on the screen error "\WINDOWS\SYSTEM32\CONFIG\SYSTEM / Windows didn't start because the following file is missing or damaged '

    But now I live in Brazil, so how can I install again my operation system XP MCE?
    Because I have the OEM software pre-installed in.
    Can someone help me please?

    Don t understand why you open a new topic!
    You have already posted this here:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=25711

  • Qosmio F10 - where can I find the correct BIOS update?

    My Qosmio F10 has a mother of replacement of Toshiba with a Geforce Go 6600 GA and an Intel 915 chipset.

    If I understand well Toshiba manual support that this should now be designated F10 - R. I tried to update the BIOS to the latest version (2007) F10 but the update procedure he throws as invalid for this machine. A research on F10 - R shows nothing.

    Can anyone help?
    Thank you
    Adriandr

    Hello

    To be honest I have never heard the Qosmio F10 - R
    I think you should ask your authorized service provider again before we do something wrong. They can tell you what BIOS you need for an update.

    Also, why do you want to update the BIOS? This t shouldn't be done just for fun because this update is always somewhat risky and should only be done if you have a problem with your laptop.

    Welcome them

  • Qosmio F10-103, Unmountable_ boot_ volume... What can I do?

    Hello
    I have a Qosmio F10-103.
    One day there is the blue page with
    writing "Unmountable_ boot_ volume"
    appeared!
    What can I do?
    I have red on some forums that it (could) be
    a hard disk problem and that
    I could fix the cpu using the
    boot Windows xp CD, copying files
    Boot.ini, NTDETECT.com, NTLDR... but...
    Toshiba gave me only the DVD - rom backup,
    not boot xp.
    Then I tried to use this end DVD as I entered
    in Toshiba 1.0.1.0 recovery utility
    and I had a disc of control... the result was:
    «Application error 29004»
    Read down sector, result = 1, disc = 128, sectors
    132479 to 132481 if the problem persists contact toshiba... "
    I am here!
    It is useful to say that all modes of starting
    Windows does not work.
    In addition, the "look-like prompt back" that appears
    Once out of the recovery utility does not
    to copy the file, I need the DVD.
    What can I do?
    Is there something to do before... the formatting
    procedure?
    Thank you very much!!!

    Hello

    Check it please this Microsoft article on this error message.

    Microsoft Knowledge Base. Q297185

    Good bye

  • Qosmio F10 with mainboard replaced: where can I find the right drivers?

    Hello guys,.
    Toshiba service replaced it by a new one, including a geforce 6600 gpu on my F10. So, now I formatted the laptop and I want to once again return to work. But I see that there are a few different devices, such as the 6600go gpu.

    Where can I find the drivers (lan, chipset, modem.. etc..) On the toshiba web site? If I choose qosmio F10 downloads, get the drivers for the old motherboard (and the 5700 graphics card).

    Anyone know where to find the correct drivers? Thank you!

    Hello

    Check it please THIS page.

    I assume that LAN driver chipset and driver are also the same.

  • Can not find the driver for Qosmio F10-101 TV tuner

    Hello everyone,

    I bought a new Qosmio F10-101... since he has previously installed Win XP Home, I reinstalled the operating system XP Professional... this time the Device Manager is to give a warning to a PCI device that is supposed to be the TV tuner... I'm looking for the TV tuner driver which works on XP Pro... any help is appreciated...

    Thank you...

    JUST GO TO THE DRIVER DOWNLOAD PAGE OR TYPE:
    http://support.toshiba-tro.de/tools/Qosmio/F10-G10/MCE/TV-tuner-XP-1020.zip

  • I can't watch videos on hulu or abc or any other site more, they don't load, please help

    I can't watch videos on hulu sites and network such as cbs or nbc.com.  Just yesterday, I watched and quickly loaded everthing.  Now, I can't load videos at all.  I ran my virus program, done a defrag, called my ISP to see if any problem there and there are none I also tried windows update and still not bring one of my shows to load, I say well flow because they are not downloaded they are listened to.

    Any advice would be appreciated, of course.

    Thank you
    Michelle

    You can browse the internet using Internet Explorer?
    You are using a wireless connection? (if so, connect the computer to the router and see if it's still a problem)
    You receive error messages?

    Brent
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • DesignJet 800 42 ": Windows 10 and DesignJet 800

    Did anyone had success with the DesignJet 800 on Windows 10.  For some reason, HP seems to have abandoned this plotter and have no specific drivers for Windows 7.  In view of the other older conspirators such as the 70 and 500 are both supported on W

  • NO RECOVERY on ITS Pavilion dv9720us

    Hello, I have a laptop HP PAVILION Dv9720US Windows Vista 32-bit I have no sound on the recovery No changes have been made before and after the recovery.  I tried to correct before the resumption, then resumed chose to be my best option. No audio, th

  • I want to move a program from one hard disk to another is possible?

    I want to move a program from one hard disk to another is possible? I have the original disc to the software, but it is damaged. The hard disk that contains the program barely works, so I need to transfer all the programs and data to another drive. I

  • hard drive HP g56 compatibility?

    Hi people, I'm having a few difficulties to replace my hard drive (I'm not sure of compatible replacement) and would be very happy if someone could point me in the right direction. My computer is a HP G56 notebook PC, serial number: CNF04182RX produc

  • Why do I see just a green screen when I try to watch a video?

    I've had my Toshiba laptop (that I bought new) for almost a year with no problems and even today, whenever I try to watch a video on a Web site, the display screen will go completely green. The sound is still working but no PIC. just green. For video