Qosmio F10: k! TV, installation

Similar Questions

• Qosmio F10: Driver Installation does not detect the wireless network card

  I wonder if anyone can help before I phone supported again. My motherboard is dead and ASP replaced and recovered my laptop qosmio F10. Since having back, my wireless card did not work.

  Windows detects a "network controller" whenever it starts and gives me the opportunity to install it. I tried to install it by navigating in the 'tools and utilities' records CD rom for folders and subfolders of "Wireless network driver" and it still does not detect the card.

  I also tried to install using the cd rom web gui and selected the 'Pilot wireless network' link and then tried to install it. It opens a dos command prompt and try to install but comes up with the error "failed installation.

  I ran the customer service and they told me to run the qosmio recovery/then recovery of product/recovery of qosmio and again...

  I still don't the card wireless not yet installed. This happened to someone else?

  I tried already shot the drivers from the web, but with no luck... If a representative of customer service with the help of good technical knowledge that would be great, or if someone has encountered the problem too and he had fixed to the give me some advice...

  Thank you very much

  Sean

  Hello

  you see the card wireless as an unknown device in Device Manager? If this is not the case, perhaps that the card was not properly installed after replacing the motherboard.

  Sorry I have no other idea.

  Good bye

• Qosmio F10-36: drive problem HARD and Qosmio player installation

  I bought the Qosmio F10-36, made in Germany for the Russia and CIS. After that 6 months, it was repaired due to problems with the motherboard, it was totally changed in the video card and now there are problems with the hard drive after the start of the very slow work computer and finallly collapsed.

  We had to format the hard drive and you must now install the player, Qosmio, which was also removed during this work.
  How we achieve this, I'm too far from the nearest service centre.

  frankly I am fed with this qosmio upward!
  If any chance that I would go back to toshiba filled like never such problems before.

  In my opinion maybe call and ask why this happen just to hear what they have to say about it.

  In any case, I recommend you to follow:
  If possible, back up all your data on an external device, such as USB key or HARD drive
  The first installation with recovery CD Qosmioplayer delivered Qosmioplayer
  When finished install OS using supplied recovery DVDs and you'll have the factory again settings

  After this check the unit carefully to make sure if there is just like before.

• New Qosmio F10-101. Where is OneNote?

  Just bought a new Qosmio F10-101 in Greece with Greek Windows XP, but I can't find Microsoft OneNote installed on my machine. On the European model site 'abandoned' the specs say clearly that OneNote is provided with this model.
  So why this software is missing?

  Hi Eric,.

  My copy of OneNote has come on a CD and I had to install it myself. He was not on the OEM Windows XP installation, and it is not included on the recovery CD.

  I recommend that you check the packaging for your Qosmio original see if there is a CD somewhere.

  HTH

• Qosmio F10: How do I reinstall the OS from the recovery CD

  Hi all

  I anticipate a full spring clean reinstallation of my Qosmio F10.
  I have all the CDs.
  Any advice on this frightening surgery would be welcome.
  Furthermore, what happened to reactivate Windows. I read that, as it has already been saved once, it might be difficult to rectivate it.

  Thank you in advance.

  Hello

  Recovery delivered image allows simply and fast installation of the software. After the installation of recovery, you don't need to make a record.

  1. simply insert the recovery disc into the CD/DVD-ROM drive.
  2. turn on your PC while keeping the 'C' key.
  3. follow the instructions that appear on the screen.

  All that s!

• Qosmio F10 - the Qosmio player Partition Recovery

  I have a Qosmio F10. He had the motherboard factory upgrade, RAM max, and a new 160 GB Samsung HARD drive mounted. So far so good. I've recently updated to Win7 and it was OK, once the drivers have been found, but I couldn't reinstall the Qosmio Player because apparently he found too little space.

  Hotline do not have much help, but I now realize that the QP is a Linux package in its own hidden partition. I've cleaned the disc, which makes an image of the system W7 on a USB HDD. Then I managed on the basis of reinstall the QP and update her, but the image will not recover in the form of images of Windows, I find now, will only recover a disk the same as the original or more.

  It is not of course because of the score of the PS. So how is it removed please? I tried everything so far.
  Just to make things to complete the product Toshiba Recovery DVD sent with the repaired machine is 70% complete and abandoned.

  Stephen

  Qosmioplayer is small application based on Linux, and according to the instructions of Toshiba s, must be installed as a first step, before you install the operating system. I m not 100% sure, but about 200 MB of free space on the HARD drive is required for installation of Qosmioplayer.
  It works perfectly when you use original Qosmioplayer and recovery disks but I put t know how it will work when you try to use your own image.

  I hope that someone else has the same model of laptop and solution for this.
  If you will be able to manage this please send a feedback.

• Qosmio F10: Forgotten my password Windows XP - how to reset?

  Hi all

  I haven't used my Qosmio F10 in addition to four months and the last time that I used it I had to change the password, but now I foolishly do not remember it.

  My account is the only account on the laptop, so I am also administrator. Is it possible that I can find out or reset the password?

  Thank you very much

  Hello

  Cannot delete the administrator account on Windows XP. You need to reinstall new OS to get access to the new created admin account.
  Simply start the installation from the Toshiba Recovery CD and the new operating system must be installed in a few minutes.

  But note; the new installation format the whole HARD drive so if you have important files on the HARD drive you back up data.

  In this case, you could remove the laptop HARD drive and it could connect to another computer via the external USB HDD controller to transfer the files to the second computer HARD drive.

  See you soon

• Qosmio F10-136 - cannot install all drivers

  I have a Qosmio F10-136.

  I recently formatted hard drive. Because I had lost the recovery disc, I had to use another copy of Windows. I downloaded the drivers available on the Toshiba site, but I did not install all the drivers except the wireless LAN. Most of the configurations of driver refuse to run at all, some seem to install the files, but the driver is not detected.

  Please notify.

  Hello

  Do you have what OS installed on your Qosmio laptop?
  AFAIK the F10-136 is a European model and so you can download all drivers here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If you use Windows XP, you can find the installation instructions document. Use this list as a recommended driver installation order.
  Usually the drivers must be installed first, and then Tools. You should start with the chipset drivers.

  Good bye

• Qosmio F10: How to get help "wake up on Lan.

  Anyone who manages to get working on a Qosmio F10 WOL?
  I found that the power management tab is missing from the properties of Intel (r) PRO/100 VE. Therefore cannot check the "allow this device to wake the computer from sleep mode.
  Read the Intel site that is said to try to uninstall & reinstall the drivers if the power management tab is missing, that I did with a new & the OEM driver, I downloaded from intel, but it did not work.
  The other parameters of WOL under the advanced settings TAB, all seem to be there.

  Before going any further I was wondering if anyone has had this works?
  If not someone from Toshiba can confirm the Bios & motherboard WOL support with built in the Lan card F10?

  Both the program HWSetup & incoming in the installation program, it seems, there is no ACPI definition of boot options.

  Thank you very much

  Qosmio f10
  BIOS 1.20
  Intel® PRO/100 VE driver for 8.0.27.0

  Hello

  On my laptop Toshiba the option allow this device to wake this computer is not accessible.
  So I think that the map network-> properties-> Advanced tab options are responsible for this action.
  On my camera, I can see awakening on the evolution of the link, ARP/Ping alarm and wake up using APM mode.
  There you can activate all options.

  In addition, you can check in the settings of ToshibaHW if the built-in LAN boot and network protocol is enabled.

• Re: Blue screen after using the Qosmio F10 recovery CD

  Hello

  I tried to use the recovery CD (XP) for my fathers Qosmio F10. I chose option 1 to return to the factory default. It seems to work fine but after it's over he says remove the CD and reboot I did. It was then restarted but flashed a blue screen for a split second before restarting. I did not see what is the Blue error screen, as it flashes up too fast. Then, it takes me to the configuration screen and asks me to choose whether to start Windows normally or SafeMode etc. All options give me the same result.

  He said if I choose to boot to the last known good configuration:

  "windows was not start because the following file is missing or damaged:
  \WINDOWS\SYSTEM32\config\SYSTEM

  You can try to repair this file by starting windows setup using the CD-ROM Moose
  Select 'r' in the first screen to start repair. "

  Of course, I do not have an original Windows CD, I just the recovery CD.

  I checked to spit on the disc but its perfect.

  I have a complete backup of all of the HDD on an external USB disk if that would help?

  Don't know what to do next?

  So just in the summary;
  You have checked the RAM, HARD drive and tried to install the Windows operating system several times but without success

  Well, maybe you should try to boot from a Linux live disc to check if the BSOD appears again?  :|
  How about Windows XP installation by using the diskette in MS Windows.
  It s worth a try

  Last but not lease, you will need to replace the memory modules RAM and HARD drive
  I mean the different HARD disk and RAM tests are useful, but it will not replace tests using new parts
  I think that this should be done by a qualified technician because he could test it before buying spare parts

• Re: Qosmio F10 - impossible to reinstall the sound card driver

  Hello

  Recently, I uninstalled a program and my sound card driver has been uninstalled with it

  I'm running the Qosmio F10 with Windows XP.

  I have the file to reinstall the diver in the Toshiba page but when I try to install I get the error "driver is not found.

  Can someone help me?

  Thanks in advance

  The European Toshiba driver page provides audio driver for XP and at this time, it s a 5.12.0.1.5160 version of Analog Devices Inc.

  You must download, unpack and then run the installation exe.

  If it doesn't work then remove the sound card in Device Manager, reboot the laptop and check again.

• Controller drivers/video display Qosmio F10-136

  I'm in the middle of reinstalling everything on my computer laptop Qosmio F10-136. I used the Toshiba site display drivers. However, in the video controller Device Manager shows an error, and the drivers are not installed. The graphics card is a nVidia GeForce FX go5700. Scrolling up and down pages in Internet Explorer is very slow.

  Also when I go to display settings-advanced-adapter graphics card properties is not displayed under adapter type.

  Someone knows what's the problem? I need to download the drivers to elsewhere?

  Thank you

  Ben

  Hello

  The graphics driver on the European driver Toshiba page works and can be installed correctly.
  I think you did something wrong.

  Try to reinstall the graphics driver again.

  Remove the graphics controller from the list of Device Manager and restart the laptop.
  Then try to reinstall the driver again. I recommend to install in the Device Manager.
  Choose graphics card, update driver, and then point to the downloaded graphics driver and complete the installation.

  See you soon

• Qosmio F10 reinstall issues

  Hello

  I have some problems with resettlement Qosmio F10.

  First, I formatted the HARD drive and created 2 new partitions. I installed the new windows XP Pro without using restore disks. Now, the computer is unable to boot to the hard drive. There is only a cursor flashing at a black screen. The player is not more work. If I understand correctly, the player has been installed on a separate partition that I deleted everything repartition disks. Is this correct? Could someone tell me the initial configuration of the HARD drive.

  I don't understand why the system is not booting. If I place the HARD drive on my other laptop it's start and everything is ok. It's a little messy.

  Any suggestions?

  Stiopa

  Which player? Do you mean Qosmioplayer?

  AFAIK qosmioplayer must be installed as a first step prior to installation of the operating system.
  To be honest, who knows what's the problem with the installation of Windows XP Home edition. What WXP you try to install the SP1 or SP2?

  Try to install it again.

• Qosmio F10 get error 'IDE #0 ERROR.

  Hello all, just bought the Qosmio F10 installed all the things I had to do. installed and registered the norton anti-virus. everything went well. now a few hours later I want to boot my laptop and get the error "ERROR in IDE #0"

  so I put my recovery dvd disk, follow the steps. English start installation, Windows xp, full disk recovery, continue...

  then I get the error: "error checking for a drive partition - please try again! Press a key to continue. then I just get: c:\ >

  That's all I have As

  any help?

  THX in advance,

  Hi Maarten

  I guess there is a problem with the HARD drive. Obviously, the HARD drive is not recognized by the BIOS, and it is not possible to access this topic.

  Please contact your dealer immediately and explain the problem.

  Good bye

• Qosmio F10-125: MCE Rollup 2 update KB900325 failed

  Hello

  I try to update my Windows XP Media Center Edition with update Rollup 2 (KB900325), but the process is broken
  I get the message:
  "The update to Media Center has failed. The computer will be restarted to the State which was before the update. "If please try installing again or contact the manufacturer of your hardware for assistance if the problem percists.
  I already remove hotfix Microsoft .NET Framework 1.1 (KB886904) computer, because Microsoft recommends that before installation,
  but I can't install the update anyway. When I run the upgrade (WindowsXPMediaCenter2005-KB900325-usa), the process begins, installs the hotfix KB895572 and KB891593, and after that stops when the process tries to Install Hotfix KB895961
  My system is Microsoft Windows XP Media Center Edition Version 2002 service Pack 2.

  My laptop is Toshiba Qosmio F10-125.
  Can you halp on this problem.
  What should I do? Why the update installation has failed every time.

  Post edited by: konstanF10

  I found the advice of Microsoft, how to install the cumulative update 2 for MCE KB900325
  http://support.Microsoft.com/kb/900325

  Microsoft says to install this update, you must have Microsoft .NET Framework 1.1 and .NET Framework 1.1 SP1 installed.

  > I already remove hotfix Microsoft .NET Framework 1.1 (KB886904) computer because of
  > Microsoft recommends that before installation

  Of course they recommend to remove this hotfix KB886904 because otherwise, installation of .NET Framework 1.1 SP1 will not succeed. But if you have already installed the Framework 1.1 SP1 you don t had to remove the hotfix KB886904.

  However, it is an area of Microsoft and I recommend you ask MS support why impossible to install the patches of singles