Qosmio F45-AV413 and VMWARE

Similar Questions

• Qosmio F45-AV413 and Windows XP

  Hello everyone!

  In my tests with Qosmio I tried installing WXP Pro, but, some refuse to drivers to install and others just run Setup, but nothing happens at all.

  Example: It has no added value package available for Windows XP Home edition. This application that implements the features of function keys and other things.
  Some other manufacturers of portable makes available to their versions of Windows XP Home and Vista edition support sites but seems that Toshiba is ready to support only Vista.

  Any help would be appreciated.

  Kind regards

  Marcelo Santos.

  > There is no added value package available for Windows XP Home edition. This application that implements the features of function keys and other things

  The full name of this package is; * Vista * value package and as the name says this package is only for Vista. There is no such thing as a value added for OS XP package!

  > Some other laptop manufacturers shall make available to their versions of Windows XP Home and Vista edition support sites but seems that Toshiba is ready to support only Vista.

  As you have probably not met the Toshiba support a high range of notebooks and on many series the Vista and XP are supported!
  If you do not take a look in the other laptop pilot areas. So please don t confuse other people with you comments.

  I visited the Toshiba driver page we found the drivers for Vista AND some drivers for XP. Other drivers simply do not exist. It seems that the F45 seems to be a very new series and possibly the other pilots, which will be released later
  Otherwise use the drivers directly from the manufacturer of the chip

  Best regards

• Qosmio F45-AV413 and HD DVD

  Hello everyone,

  I'm not shure, but can I play HD-DVDs on my Qosmio model?

  How I discovered this?

  TKS,

  Marcelo.

  Yes, you have a HD-DVD player. After some googling around, I found some good information. But I think that the one and only way to find out is to put a HD disc in your drive and check it out. ;)

  Welcome them

• How to set RAID 0 on Qosmio F45-AV413

  Hi all

  F45-AV413 have two hard drives, and, I think about to create a RAID 0 for fast disk access, but I found no option on BIOS for this.

  Anyone know a way to create this type of volume of disk on this model?

  TKS,

  Marcelo.

  Hello

  Qosmio F45-AV413 seems to be designed only for the American market.
  I visited the Toshiba site we found useful information about the Qosmio F45-AV413 and RAID.

  This laptop is equipped with 2 SATA HDD, but it seems it does NOT support the RAID is why this option does not appear in the BIOS!

  Best regards

• Upgrade the hard drive to the Qosmio F45-AV413

  Hello!

  I have a Qosmio F45-AV413 with two hard drives. I noticed that one is a common SATA (the one that contains the operating system), but the other is smaller (it's what I ve has noticed that I didn t take it out) is that the hard drive what is called a disk´ hard ´hybrid?

  I looked for more information on this found nothing but, with the exception of [this page | http://laptoplogic.com/resources/detail.php?id=82] where the guy teaches how to change the HD SATA for a more/better one. But no word on the other HD.

  Are the two HDs of the same type?

  Can it be replaced and implemented using the recovery discs or the recovery disks are waiting for the original model/size of the hard drives?

  Thank you very much for your answers!

  Hi Alfredo

  I m not a Qosmio F45 owner so I can post only a few observations regarding the information and the details published on the site that you have linked.

  It seems that both hard drives are supported on the SATA interface.
  On hard drives is a little thinner and so it s mounted in the HARD disc enclosure.

  In my opinion, you can use different hard drives SATA 2.5 from different manufacturers.
  He should t be a problem.

  See you soon

• Qosmio F45 - DVD and CD eject issue

  I have a Toshiba Qosmio F45 and when I got the computer in September he had a problem of not warning to read or write on some discs.

  Now it gets worse to the point where when I insert a disc. It spits out a not read her at all.

  The drive is a TEAC DV - W28SLCT ATA Device.
  The laptop has windows vista.

  What can I try if its a hardware problem or update

  Hard to say what causes this problem. You have this problem with all media or just a special type of brands?

  Don't know if this can be corrected by the update but you have the latest version of BIOS of your laptop?

  Maybe there's something wrong with the disc loading mechanism. Check if there is something stuck inside, which means, to watch if you can find something that does not belong don't not to ODD.
  But be careful with what you do.
  I would really say to contact local ASP.

• Qosmio F45-AV413 refurbished showing DMI.exe error when trying to restore

  Here's the problem:

  I formatted the original disc to install Vista in another language with my own Vista disc.
  After that, I couldn't do some drivers to work properly, so I decided to do a system restore.
  I didn't have the disc so I asked Toshiba for some DVDs. They send them to me and after insertion of the discs and choosing Toshiba utility to restore from the menu it appears a window saying error DMI.exe and some codes and the error "memory could not be read.
  After I pressed OK, it appears another window with this error "03-eeee-0000.
  After I press OK again. The disc is ejected and the computer turns off.

  I updated the bios to the latest version 1.9 and I changed the ram sticks with other ones that work well, but the problem persists.

  Searching in Google, I read that it may be something with the Toshiba DMI and it is fixed with a DMI update utility, but I have not found one for this laptop. Also, I read something about the original MBR who is not respected and Toshiba needed for restoration. I don't think it's OK, because I can install any OS I want with my laptop and I have to restore the original OS when I want to.

  So please, I ask to help with this problem.

  Thank you in advance.

  Hello

  DMI.exe is part of the recovery process that verifies material in order to ensure that you are trying to load your OS on a different machine.
  There is specific information inside the Toshiba hard drive so that DMI could restore your preactivated version of vista.

  You can install fresh windows vista and use the drivers on this page:

  [Click here | http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modItemList.jsp?moid=1757693&rpn=PQF43U&ct=D L&BV_SessionID=@@@1588502434.1220287432@@@&BV_En = ccceadefddkhiekcgfkceghdgngdgmm.0 gineID]

• Toshiba value added Package for Windows Vista Version 1.1.3 on Qosmio F45

  I installed the new * Toshiba value added Package for Windows Vista Version 1.1.3 * for my Qosmio F45-AV413 and function keys was arrested for work.

  If I don't go back to the previous system, there is no action that I can do to make the works of buttons again.

  I tested with Vista Home Premium which is installed with the product, tested with Vista Business from scratch, and none of them work as expected.

  Well, if someone could help me with this question I really thank you,

  Marcelo.

  Have you already tried to install an earlier version of the software function button on your system? I think the new version is buggy and if not already a newer version is released, you should have the old version until a new one comes out.

  Please check if the old version works, it shouldn´t be a big problem for the single download from the Toshiba driver download site.

  See you soon

• Qosmio F45-AV425 - buggy video playback and HD audio

  I have a Qosmio F45-AV425 and recently bought a title of HD-DVD (planet Earth). I tried to play it drive Toshiba HD of Pentecost, but video and sound playback where buggy (video and his sometimes gel, 100% CPU usage). If I update the player to version v4.32.00, but nothing has changed.

  My computer has the TS-L802A HD player - DVD with the version 6.0.6000.16386 firmware (21/06/2006). I not found any update for this drive.

  Can someone help me?

  Hello

  Have you tested with different HD-DVD movies? Is equivalent to reading?

• Qosmio F45 overheating after update Bios v1.90

  Hi again.

  Last night that I've updated my Qosmio F45-AV413 BIOS with version "qf45v190" but, today, in the afternoon, I noticed that my laptop was so slow and it was overheating!

  I immediately went to reset Windows Vista, but instead, computer laptop completely off.

  I left the rest of the computer for a few minutes and it works again. After a few hours of work, he began to behave terribly slow and heat once again! I have reset and when I clicked on F2 to enter setup, the computer turns off...

  I'm sure it has something to do with the latest Bios Update!

  Everyone knows the same problem?

  BIOS version "qf45v150" played very well and I think in flashing my laptop with this version. IS THIS POSSIBLE? Can I go back to an older version of BIOS? PLEASE HELP ME!

  Thanks a lot for your answers.

  Hello

  I found on the Toshiba page we v1.5 of BIOS for the Qosmio F45 (PQF43U, PQF46U)

  Toshiba on this page we:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_modSel.jsp

  Here you have to choose your Qosmio F45 model and you should get all BIOS versions available for this series.

  Maybe it's possible to downgrade the BIOS to the earlier version.

• Updated card graphics and Qosmio F45

  The graphic Chipset in a Qosmio F45 AV412 can be improved? I assumed that before I bought it it would go at least the minimum graphics for games.
  I was so wrong. Suggestions?

  Hello!

  I m not the owner of a Qosmio so I m not sure but as far as I know it s not possible to update the graphics card on a Toshiba laptop. For the upgrade of the GPU, I can prefer this useful link:
  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

  But why you want to upgrade? I mean the Qosmio F45 is the oldest not portable and the graphics performance should be good.

  Good bye

• Toshiba value added package and Qosmio F45

  Hello

  After reading [here | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=103556] that there is a problem with the keyboard shortcuts no longer work after the upgrade to the 'Toshiba value added package' in * Qosmio F45 * models, let me ask you if someone have correctly installed the latest version of the software (1.1.7) and have no problem with the keys.

  I just installed SP1 on my system Vista Premius. Should I wait for problems with PPV?

  I'd appreciate your help.

  Alfredo

  Just a short comment: version 1.1.7 is designed and tested with Vista without SP1. If you use it with SP1, you may have some problems. To avoid this Toshiba has to offer the new version. This new version will run in the new images of recovery (Vista SP1). After that it will be offered on the Toshiba support page.

  Qosmio F45 is probably US laptop model and for all information visit Toshiba US page http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp

  By the way: check out this interesting article on restrictions with Vista SP1
  http://APS2.toshiba-tro.de/KB0/TSB84026M0000R01.htm

  Bye and good luck!

• controller of storage and some more mass drivers installation for qosmio f45-av411 for xp professional

  Hello

  Any body Guide please that how to update the drivers who were not yet updated as mass storagecontroller & PCI Memory controller.
  Hi SohailZafar Butt,
   
  Visit the following link and download required drivers by selecting the version of the operating system from the menu drop down and even install on your computer:
  Qosmio F45-AV411 drivers
   

  You can also follow this step to do the same thing:

  a. double-click the type of device you want to update or change.

  b. right click on the device driver specific, you want to update or change.

  c. click put to update driver to open the Hardware Update Wizard. Follow the instructions in the wizard.

  More information on:

  How to manage devices in Windows XP

• My Qosmio F45-AV425 does not illuminate

  Hi friends

  I have a Toshiba Qosmio F45-AV425. When I press the power button, the laptop starts, the LEDs work properly, but noting appears on the screen. I hear two beeps and immediately cooling fan stops but LEDs continue, then I have to turn off the computer. I changed the memory cards for a good, but nothing.

  What does two beeps? It has the warranty has expired. What can I do?

  Luís De Sousa

  Have you tried to install memory in another location? Some laptops will not start if there is RAM only Slot b

  Also try an external monitor, you see an image?

• "Session Fixation error" - cannot burn CD/DVD with Qosmio F45-AV11

  Hello... m from Saudi Arabia. I have a problem with my DVD - RW Drive (TEAC DV-W28SL) drive with my Qosmio F45-AV11. When I try to burn CDs, it is always 'Mistake of Fixation of Session', "could not perform Fixation" etc and I lost a lot of blank CD, I can't burn successfully. Please help me how to solve this problem:

  Here is the text of newspaper which shows:

  Toshiba
  -***-3005-4001-0556-76E0-0900-4026-X8E5-*** (*)

  Windows XP 6.0
  IA32
  WinAspi: -.
  Ahead WinASPI: file 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver = 2.0.1.74, size = 169792 bytes, created 14/03/2007 12:02:04

  NT-SPTI used
  Nero Version: 7.5.14.2
  Internal Version: 7, 5, 14, 2
  (Nero Express)
  Recorder: Version: M.6A - HA 1 YOUR 0 - 7.5.14.2
  Adapter driver: HA 1
  Drive buffer: 2000kB
  Bus type: default (0)-> ATAPI, detected:?
  CD-ROM: Version: M.6A - HA 1 YOUR 0 - 7.5.14.2
  Adapter driver: HA 1

  = Scsi-device-map =.
  DiskPeripheral: TOSHIBA MK2035GSS iaStor Port 0 ID 0 DMA: on

  = CDRom-Device-map =.
  TEAC DV-W28SLCTF F: CDRom0
  =======================

  AutoRun: 1
  Excluded drive IDs:
  WriteBufferSize: 83886080 (0) bytes
  BUFE: 0
  Physical memory: 2037 MB (2086720 KB)
  Free physical memory: 993MB (1017672kB)
  Memory used: 51%
  QUERIES PFiles: 0x0
  Use consultation: 1
  Global Bus type: default (0)
  Control supported media: disabled (0)

  4.11.2008
  Digital Jukebox (MP3, WMA, Nero)
  21:35:30 #1 text 0 file SCSIPTICommands.cpp, line 411
  LockMCN - completed successfully for IOCTL_STORAGE_MCN_CONTROL

  21:35:31 #2 text 0 file Isodoc.cpp, line 6517
  ISO document burn settings
  ------------------------------------------
  Determine maximum speed: FALSE
  Simulate: FALSE
  Write: TRUE
  Finalize the CD: REAL
  Multisession: FALSE
  Burning mode: TAO
  Mode : 1
  ISO level: 1 (Max. of 11 = 8 + 3 char)
  Character set: ISO 9660
  Joliet: TRUE
  Allow pathdepth more than 8 directories: TRUE
  Allow more than 255 characters in path: TRUE
  Write ISO9660; 1 file extensions: TRUE

  21:35:31 #3 text 0 file Burncd.cpp, line 3178
  TEAC DV-W28SLCTF
  BURN-Proof activated

  21:35:31 ISO9660GEN #4-11 file Geniso.cpp, line 3341
  First address writeable = 0 (0x00000000)

  21:35:31 #5 text 0 file Burncd.cpp, line 3490
  Turn on Track-At-Once, using CD-R/RW media

  21:35:47 #6 Text 0 File DlgWaitCD.cpp, line 307
  Last possible write address on media: 359848 (79:59.73)
  Last address to be written: 314215 (69:51.40)

  21:35:47 #7 Text 0 File DlgWaitCD.cpp, line 319
  Write in overburning mode: No.

  21:35:48 Text 0 File DlgWaitCD.cpp, line 2940 #8
  Recorder: TEAC DV - W28SLCTF;
  CDR code: 00 97 27 28; Entry YSOS of: Princo Corporation
  ATIP data:
  Special Info [hex] 1: F0 00 80, 2:61 1 b 1 c (LI 97:27.28), 3: 4F 3 b 4 a (LO 79:59.74)
  Additional info [hex] 1: FF FF FF (invalid), 2: FF FF FF (invalid), 3: FF FF FF (invalid)

  21:35:48 #9 Text 0 File DlgWaitCD.cpp, line 493
  > Protocol of DlgWaitCD activities:
  =========================================
  Insert the disc to write to.
  (Average in drive: CD - R.) Medium required by compilation: CD-R/RW.)

  21:35:49 text 0 file ThreadedTransferInterface.cpp, line 792 #10
  CIS (after recorder preparation)
  0: TRM_DATA_MODE1)
  2 indices, index0 (150) not provided
  #0 + 20217 (20217) original disc POS = #20217 / 4:29.42
  relocatable, pos to drive for the cache-write implementation not required / required
  -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 20215 blocks [F: TEAC DV-W28SLCTF]
  --------------------------------------------------------------

  21:35:50 #11 text 0 file ThreadedTransferInterface.cpp, line 995
  Prepare [F: TEAC DV-W28SLCTF] for write in TAO
  DAO infos:
  ==========
  MCN:
  TOCType: 0x00; Session closed, fixed disk
  3 to 3 titles: Idx 0 Idx 1 next Trk
  1: TRM_DATA_MODE1, 2048/0 x 00, FilePos 0 307200 41711616, ISRC ""
  Introduction DAO:
  ===========
  ___Start_ | ___Track_ | _Idx_ | _CtrlAdr_ | ___Size_ | ___NWA_ _ | _RecDep___
  293849 | Lead-in | 0 | 0x41. 0 | 0 | 0x00
  293849 | 3. 0 | 0x41. 0 | 0 | 0x00
  293999 | 3. 1. 0x41. 20217 | 293999 | 0x00
  314216 | Lead-out | 1. 0x41. 0 | 0 | 0x00

  21:35:50 #12 text 0 file ThreadedTransferInterface.cpp, line 1066
  2 blocks from output taken at the end of track 3. Length: 20217-> 20215.

  21:36:10 #13 text 0 file SCSIPTICommands.cpp, line 231
  Error LockVolume: access is denied.

  21:36:10 #14 Text 0 File SCSIPTICommands.cpp, Line 254
  SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

  21:36:12 #15 text 0 file SCSIPTICommands.cpp, line 209
  SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

  21:36:12 #16 text 0 file Burncd.cpp, line 4263
  Caching options: cache CDRom or network-Yes, small files-no)<>

  21:36:12 #17 phase 24 file dlgbrnst.cpp, line 1760
  Caching of files started

  21:36:12 #18 text 0 file Burncd.cpp, line 4382
  Cache writing successful.

  21:36:12 #19 phase 25 file dlgbrnst.cpp, line 1760
  Caching of files completed

  #20-21: 36:12 Phase 36 file dlgbrnst.cpp, line 1760
  Burn process started at 24 x (3 600 KB/s)

  21:36:13 #21 text 0 file ThreadedTransferInterface.cpp, line 2712
  Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to 293999 #.

  21:36:14 #22 text 0 file MMC.cpp, line 22351
  Set BUFE: BURN - Proof-> ON

  21:36:14 #23 text 0 file ThreadedTransfer.cpp, line 269
  Size of the memory pipe 83836800

  21:37:20 #24 text 0 file MMC.cpp, line 17112
  start closing a Session

  21:37:23 #25 SPTI-1176 file SCSIPassThrough.cpp, line 179
  CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1176)
  Key: 0x05 (KEY_ILLEGAL_REQUEST)
  Printing Code: 0 x 72
  Meaning of Qual: 0x03
  CDB data: 0 x 00 00 00 00 00 00 00 00 00 00 00 00
  Sense area: 0 x 71 00 05 00 00 00 00 0E 00 00 00 00 72 03

  21:37:23 #26 CDR-1176 file ThreadedTransferInterface.cpp, line 1244
  Session fixation error
  F: TEAC DV-W28SLCTF

  21:37:23 #27 text 0 file MMC.cpp, line 17112
  start closing a Session

  21:37:24 #28 SPTI-1176 file SCSIPassThrough.cpp, line 179
  CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1176)
  Key: 0x05 (KEY_ILLEGAL_REQUEST)
  Printing Code: 0 x 72
  Meaning of Qual: 0x03
  CDB data: 0 x 00 00 00 00 00 00 00 00 00 00 00 00
  Sense area: 0 x 71 00 05 00 00 00 00 0E 00 00 00 00 72 03

  21:37:24 #29 CDR-1176 file ThreadedTransferInterface.cpp, line 1244
  Session fixation error
  F: TEAC DV-W28SLCTF

  21:37:24 #30 phase 38 file dlgbrnst.cpp, line 1760
  Burn process failed at 24 x (3 600 KB/s)

  21:37:24 #31 Text 0 File SCSIPTICommands.cpp, Line 254
  SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

  21:37:28 #32 text 0 file Cdrdrv.cpp, line 11061
  DriveLocker: UnLockVolume completed

  21:37:28 #33 text 0 file SCSIPTICommands.cpp, line 411
  UnLockMCN - completed successfully for IOCTL_STORAGE_MCN_CONTROL

  Existing drivers:
  File ' Drivers\ADPU160M. SYS: Ver = 6.4.645.100 (NT.051018 - 1332), size = 98408 bytes, created 02/11/2006 12:50:35

  Registry keys:
  HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon

  Waiting for your valuable response.

  It s pretty cool that you post the log file but I doubt that it could be useful.
  To my eyes the CD/DVD drive is faulty or the CD that you used are not entirely compatible.

  I had some burning questions with my CD/DVD drive, but I could solve this problem by using a different CD and DVD from another manufacturer.
  I have read that many people recommend using TDK CD - R or DVD - R media.
  I checked these discs and my drive supports it fully.

  Maybe you should try it too.

  Welcome them