Qosmio F50 series - slow boot time

Similar Questions

• Qosmio F50 series contains RAID controller?

  Hello

  I am looking for a new computer laptop Toshiba and understood on this forum that Satellite P300 series does not have a RAID controller :-(
  To make it short: did the series Qosmio F50 got a RAID Controller? Is it possible to rotate the 2 HDD in RAID 0?

  Hello

  > Qosmio F50 series you have a RAID controller?

  No, as I know the Qosmio F50 series doesn t supports the RAID controller.
  It supports a simple SATA controller but not the RAID and so you cannot use RAID-0.

  Good bye

• Qosmio F50 - replacing the fan 12L

  Hello

  I have problems with my laptop. I had some problems with my fan, and I have to replace it. I contacted the support by Toshiba repair centers on the Greece on the replacement, and they said that they do not have a replacement. I want to know what models of the other computer with the same fan like mine, so I can find a.

  My computer series is: 69198482 k
  Thank you.

  I agree with Timox.
  All cooling modules that have been updated with the Qosmio F50 series would be compatible with the Qosmio F50 - 12L

  In case you are not able to order this part of premises Toshiba ASP, I recommend you get some online dealers who trade with computer parts for the cooling fan Qosmio F50 on some portals like Ebay or simply google phone 2nd hand.

• Qosmio F50-126 does support Quad Core processor

  I have a simple question:
  Is my image of Qosmio F50 - 126 support processor and HOW?
  Can I still use it.

  For 3 months of use of this fantastic machine, I never found an option for up-conversion.

  The only thing I've seen is in the program and function indicating the image processor driver.
  I HAVE NO IDEA HOW TO USE IT!

  Hello

  The Toshiba Quad Core HD processor (I think you meant this) is not supported by the Qosmio F50-126.
  I don't find it here:
  http://EU.computers.Toshiba-Europe.com/innovation/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=EU&com.broadvis ion.session.new = Yes & PRODUCT_ID = 1061504

  If you want to know what models Qosmio F50 would support the Toshiba Quad Core HD processor then you can check this here:

  http://EU.computers.Toshiba-Europe.com-> Products-> Qosmio-> F50 series

• Boot from the disk ESATA on the Qosmio F50 - 10Z

  Hello

  is it possible to boot from an external drive using the ESATA port?
  I have BIOS 1.60 installed but I don't see an option for ESATA?

  What a USB? Laptop is a Qosmio F50 - 10Z

  Thank you

  I think that it of not possible to start from eSATA. The BIOS should provide this type of functionality.
  I've never tried, but I think that's not possible.

  As far as I know, it must be possible to boot from a USB device.
  The BIOS does not support this then try it.

• Wake up the Qosmio F50 - 10G system mode 'sleep' and boots account locked window

  Why when the laptop is put to sleep and left for a while, flashing light and stops when you press the power button / laptop will wake up showing the BIOS screen then boots in the window account locked?

  Why I get this is event viewer? Source ACPI
  The embedded controller (EC) data returned when none was requested.
  The BIOS may try to access the European Community without synchronization with the operating system.
  These data will be ignored. No further action is necessary; However, you should check with the manufacturer of your computer for an updated BIOS.

  When Windows 7 starts, the icons on the desktop, menu start and records are white then start then normal fill when seen once again, any reason why?

  I used Windows 7 drivers.

  Thank you

  Hey mate,

  I have too many Qosmio F50 and you can change the option if, after hibernate or stand-by the account should be locked or not. As far as I know that this can be changed in power management.

  About this window of Event Viewer, I never heard talk about this and my Qosmio F50 works fairly well with Windows 7. You have installed all the drivers for it? You have yellow exclamation marks in Device Manager?

  I also used Windows 7 drivers, but did you download from the Toshiba page? These drivers are pre-tested and normally should work pretty well.

• Qosmio F50-125 - yield is very low

  I purchased a Qosmio F50-125 and right out of the box, it runs as a piece of junk. Everything is a little slow, when I boot it and it goes to welcoming screen, it says "Please wait" then 2 minutes.

  But worst of all is that everything is a bit slow and jerky when I surf the Internet. If I try to watch a video on youtube, it's a slide show. I downloaded 3d mark 2006 and with this map graphic, I should get about 7800 but I get only 3800. His true annoyng and I can't understand what could be the problem.

  Thing is that I bought the computer in my home country (Serbia) but I am now in France and will stay here for at least 4 months, so I can't take back. Any1 got clues about how to solve this problem? TX.

  Hello

  Friend of me a Qosmio F50 and he is very satisfied with this laptop and I only can it s very fast and doesn t do it no problem again.

  Anyway, all the time long start, you must check this Toshiba document:
  http://APS2.toshiba-tro.de/KB0/FAQ9401B10001R01.htm

  In addition, it would be interesting to know if you are running the factory settings or you have installed your own version of Windows?
  You have yellow exclamation marks in Device Manager?
  Can notice errors in the Windows Event Viewer?

  Slow performance can also be caused of internet security software. What software do you use? I recommend AntiVir.

• Qosmio F50 - 10K - replaced by Qosmio F60-126?

  According to reports from Toshiba, laptop model F50 - 10 K is removed and replaced with F60 - 126.

  I would like to know why.

  Hello

  I think Toshiba only knows the exact answer, but I can say that all Qosmio F50 have been replaced by new Toshiba Qosmio F60 series. Latter has a new design with newer and more powerful hardware, it s cutting edge design and material.
  This normal behavior from time to time some laptop models will be replaced by new ones.

  Are you not satisfied with your F50? I mean s still a great piece of hardware ;)

• Upgrade memory and disk SSD Qosmio F50-108

  Hello!

  After 3 years, I decided to upgrade my [Qosmio F50 | http://eu.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=EU&PRODUCT_ID=1 055727 & DISC_MODEL = 1] new SSD and additional memory.

  With a drive, I'm pretty well agreed the [Intel 320 120 GB SSD | http://www.intel.com/content/www/us/en/solid-state-drives/solid-state-drives-320-series.html], unless you recommend something different maybe?

  But I have the problem before deciding what size memory to take. Now, I 3 072 (2 048 + 1 024) MB DDR2 (800 MHz), and CPU - z says it runs in mode dual channel with timings 6-6-6-18(on memory stick it says 6-6-6-12?). I watched [Patriot DDR2 SO-DIMM 4 GB 800 MHz | 787 http://patriotmemory.com/products/detailp.jsp?prodline=3&catid=33&prodgroupid=59&id= & type = 5], and he said just in time of latency case 6. I have not found on the internet what timings there so I have a question:

  If I buy 1 (one) memory stick (Patriot) and replace it with 1 GB stick in laptop, old 2 GB + 4 GB new work in dual channel, or do I have to buy 2 x 4 GB (Patriot)?

  If this does not work, you rather 6 GB with channel single or dual channel 4 GB.

  Thanks for all the answers!

  > I pretty much agreed with drive, Intel 320 120 GB SSD, unless you recommend something different maybe?

  I think it shouldn't be a big problem with the compatibility because the HARD disk controller supports the SATA interface and the SATA SSD drive should also be compatible.

  > If I buy 1 (one) memory stick (Patriot) and replace it with 1 GB stick in laptop, old 2 GB + 4 GB new work in dual channel, or do I have to buy 2 x 4 GB (Patriot)?

  Dual Channel does not require two execatly the same memory modules.

  So, theoretically, you can use a module of RAM 2 GB and 4 GB RAM module.
  I advise to use 4 GB of RAM in A slot and 2 GB of RAM in slot B

  But the two modules must supports the same speed (800 Mhz), otherwise the module more quickly would be pointing down.

• Qosmio F50 - 10Z with windows XP

  Hi all

  I just bought an a Qosmio F50 - 10Z to run a CAD program, which does not work with Vista, unfortunately. I would like to keep Vista and add windows XP in a Setup to dual boot with Vista BootPro.

  Everything seems simple so far, but I am a novice to what follows. Apparently, after some research, I learned to integrate a XP disc with the necessary drivers. I'm a bit of a loss as to what drivers to collect etc so I went to ask the advice of a COMPUTER technician and he said that unless the drivers are available on the toshiba site then it is not possible to install XP at all.

  Is this true?, or is there anything else we can do? The interest to buy the laptop was running the CAD program (which only works on XP).

  Any help is very appreciated.

  > I'm a bit of a loss as to what drivers to collect etc so I went to ask the advice of a COMPUTER technician and he said that unless the drivers are available on the Toshiba site then it is not possible to install XP at all.

  That's nonsense!
  Of course, you will be able to install Win XP but the point is that a lot of portable devices does not work with Win XP due to unavailable drivers or tools

  The XP drivers are not available on the Toshiba driver page, but you can find it on other sites.

  For example;
  Sounds and driver LAN can be downloaded from the Realtek page.
  WLAN driver Intel page or here:
  http://APS2.toshiba-tro.de/WLAN/

  Driver BT from here:
  http://APS2.toshiba-tro.de/Bluetooth/

  Touchpad driver can be used other mobile computer series

• Qosmio F50-126 not supprted for Windows 7 upgrade?

  I get really angry with Toshiba and Windows 7 upgrade option.
  I'm really excited about the upgrade of my Qosmio F50 - 126 to Windows 7 from Vista Home Premium.
  But after doing a little research on issues related to the upgrade, I burst into anger.

  I went to this link [http://aps2.toshiba-tro.de/kb0/TSB9902P50000R01.htm] to check if my phone is supported, but because I paid a lot of money for it I have it MUST have.

  But guess what... IT IS NOT!

  In addition to this... It says on the website that the notbook not mentioned will get "limited support"!
  WHAT? my 1999 MACHINE VA GET LIMIT dollar taken in CHARGE for WINDOWS SEVEN!

  That I am, I guess to do... buy another Toshiba or sue to get the money and buy a new one?
  Does that mean I can't run windows 7 will be of all drivers runnin? WHAT SHOULD I DOOO DARN?

  Hi mate

  Guess what? I have an older A210 home
  I installed Win 7 on it and everything works fine!
  As you can see it the A210 is not listed as a supported series Win7, but it should be a serious reason does not install a Win7 on it?

  I didn t find official drivers on the driver Toshiba page but I could perceive my own hand, I used tools of free hardware diagnosis, which helped determine the installed devices
  I took the time to learn all the drivers, but it wasn't a big problem

  Thus, even your laptop is not listed in the page, you will be able to use Windows 7 and will be able to collect the necessary drivers

• Qosmio F50 - 10G drivers for Windows xp?

  Hello everyone I had a few problems with windows vista and games, I get a lot of delays when playing warcraft III

  in any case, I want to ask you for the Qosmio F50 - 10G drivers for XP

  Can I get them?

  Thanks for reading

  Hello

  It seems that Win XP drivers are not available at this time on the European driver Toshiba page.
  I also not very well if the XP driver will be released in the future of m.

  So do many laptops Toshiba are equipped with the same features.
  That's why drivers from other series of laptop XP can run on the F50 series.

  Try to install some XP drivers one of the series of portable which is equipped with the same features.
  Unfortunately, but that's all I can say for now.

• Not possible to install the printer on the Qosmio F50

  I have a Qosmio F50 - 10 M, running on Vista 32 bit SP2.
  I tried several times to install a new color printer HP Laserjet MFP276nw 200 without success. The error text is not specific...
  The installation software, I should contact my provider of system support.
  Well, I'm here...

  Does anyone have any ideas how to install this printer on my system?

  Kind regards
  Kai

  To be honest with this problem. If your laptop works well, and the OS is stable why laptop of the manufacturer must be responsible if there is a problem with the installation of the software of third party?

  In my opinion, you should contact the printer manufacturer software and ask why you cannot install their software on many working Windows System. I use HP 120 Envy with my machine and I had no problem at all (win7 64 bit).

• Impossible to install Win7 on my Qosmio F50

  Hello
  I hope you can help me in my problem. I have laptop old model Qosmio F50 - 10G #. PQF55E-00V012AR. It is installed windows vista Home premium. For my desired to change my OS to windows 7, I reformat real proper installation.

  the problem is, it can be install any OS same win XP and win Vista.

  Windows Vista and Windows 7 this page that I load the hard disk system. It cannot detect the hard drive. I'm trying to install the driver AHCI of it but his failure, now, even windows xp cannot install, it's error when he reach windows boot.

  What can I do if I installed an operating system?
  Help, please.

  I put t really know what the problem is here. By default the BIOS settings and try again to install Win7.
  Do you use the original Microsoft installation disc?

  Start your laptop and press F12 to get into the boot menu. When the menu is displayed on the screen put Win7 disc in ODD, choose the CD/DVD drive and press the button enter.

  What happen exactly when you do this?

• Qosmio F50 - Recovery required Utility

  Hello guys, somehow I uninstalled the programs files recovery utility.
  And I am unable to find a second time to download. I drive HARD recovery on my HARD drive and I just need the utility for my Qosmio F50.

  Is there a link were I can find it?

  Hi adiwrz,

  Usefulness of restoration of what you mean? Such a tool is not known to me

  You can use HARD drive recovery option to recover to factory settings, but it has nothing to do with this recovery utility.