Qosmio F60 - cannot start Win7 on 16 GB of RAM

Similar Questions

• Qosmio F60 - cannot use the touchpad scrolling feature two fingers

  Hey there,

  I recently got a laptop hard drive to my Qosmio f60 replacement and windows had to be reloaded.
  Then my cell phone worked before I could two fingers scrolling on pages and others.
  Now, I can't, and I can't find a setting for this anywhere.

  Ive downloaded a driver called "scrybe" that allows me to do this,
  but I'd rather widely does not run a processor extra and just using the default function of portable.

  Can someone explain why my laptop before do me that and now cant? and how can I solve this problem?

  Thanks heaps!
  -Brenton

  > can someone explain why my laptop before do me that and now cant?

  Maybe the Synaptics touchpad driver is not installed?
  Synaptics touchpad driver additional features.
  That's why I recommend you to install this driver.

  The settings are located in Control Panel-> mouse-> tab advanced-> avancΘs

• Qosmio F60 - cannot connect wireless

  Hello
  Received my new modem wireless BoB today and it works fine with my desktop PC, but I contacted my FNSI iinet to help with my setup wireless for my laptop F60 & @30 minutes they tried to set up a wireless connection.

  However, my laptop for some reason won't detect my wireless network... "no connection available. They have abandoned and says its something wrong with my Toshiba / settings & I should contact technical support.

  Any ideas on where I might start?
  Thanks lantana

  Hello

  Is the WIRELESS card in your laptop listed in Device Manager correctly?
  You should try to update the driver WLAN too. The latest version, you can download on the page of Toshiba.

  If you use a MAC address filter on your router, you must disable it and the encryption as well.

• Upgrading RAM on the Qosmio F60 - 00Y

  I have a Qosmio F60 - 00Y and I want to upgrade the Rams inside 4G to 8G and I want to know what type of Rams are?

  See you soon.

  I know Qosmio F60 - 00Y supports DDR 3 (1066 MHz) up to 8 GB, so you can use 8 GB of memory (4 GB + 4 GB) DDR3 (1066 MHz)

• Qosmio F60 - 11F - problems with installing the drivers Win7 64 bit

  Hello again.

  I have a Qosmio F60 - 11F and I install * windows 7 ultimate 64 bit *, I installed all the drivers from the Toshiba site,
  and I am facing a problem with some drivers,
  1 - BIOS update v B2.10 - EC1.60 the message "this computer not supported.
  2 - v Eco Utility 1.2.11.64 the message "no supported BIOS.
  3 - PC Health Monitor 1.5.6.64 v & v 1.6.0.64 the message "not support".
  4 - TV Tuner v 2.3.3.31 nothing happens.

  Can anyone help?

  Have you installed the Toshiba value added Package?

  You need the correct PVAT designed for the Qosmio F60 and Win7 64-bit. Take a look at the Toshiba site (section support/drivers).

• Need driver WLAN Win7 for my Qosmio F60 - 10J

  Hello

  I can't find drivers for WLAN for Win7 64 bit for my computer Qosmio F60 - 10 days in the support center and download!

  Hello

  AFAIK drivers WLAN you can find on the Toshiba WLAN portal - http://aps2.toshiba-tro.de/wlan/

  Check it out.
  By the way: do you know what WLAN card has your Qosmio laptop?

• Qosmio F60 - starting with Windows 7 and Dynadock U problems

  I recently acquired a new Qosmio F60 and a new port replicator Dynadock U. problem, but it will not start upward unless I disconnect the Dynadock by unplugging the USB cable from the laptop. I downloaded the latest drivers for the F60 and the Dynadock from Toshiba site without change to the problem.

  Also, the entire system in slow frustrating execution of orders despite the fact that the system's processor i7-based.
  I am running Windows Home Premium 64 bit version with Norton Security and have no innstalled unauthorized or unusual software.

  Any ideas?

  Hi Sandgroper,

  All other devices are connected to the Dynadock port replicator? Perhaps the external device is causing the Windows 7 startup problem

  Have you installed latest version of BIOS of Toshiba? As far as I know the new version came out a few days ago

  Check this box!

• Re: Qosmio F60 - 100 Blue-ray will not start film or same menu

  Hey guys!

  My Toshiba Qosmio F60-100 works perfectly. He has just blu ray player that is causing problems, because whenever I put a Blu - ray drive, it starts the program "Win DVDBD" but never starts playing the movie or even the menu.

  I don't know how I can solve this problem.
  I tried already with the famous update, but when I try to install it, I get a message that the update is not for my computer.

  Thanks in advance for your help.

  Volki

  Hello

  Have you tested different Blue-ray discs?

  I got this Toshiba FAQ
  + Some Blu - ray discs are going to have problems when played on the models of "WinDVD BD for Toshiba" version 8 +.
  http://APS2.toshiba-tro.de/KB0/TSB0402V40000R01.htm

  Check it!

• Problem starting start Qosmio F60-124

  Hi, I have a Toshiba Qosmio F60-124.

  Yesterday, I was working on my projects (sony vegas & adobe etc.) and it was very slow. I found strange because the pc is very fast. I open my sony vegas window and it luckily anwser, so I tried to close it but it didn't work.
  So I pressed the start button to turn off the pc.

  When I press again to put into service, appeared a black screen with this:

  Realtek...
  .....
  ....
  Insert system disk in drive.
  Press any key when ready...

  What can I do? I don't have any disk
  Please help me

  Hello

  Try to enter the BIOS and check if the HDD is recognized and registered correctly. By default the BIOS settings and try again your Qosmio.

• Qosmio F60 and Win7 x 64 drivers

  Hi, I just bought a Qosmio F60:-PQF65A-016002 and done a clean install of windows 7 Pro x 64.

  But now I am unable to find drivers for it. I looked in the help of toshiba, but it brings no drivers for my machine.

  If someone could point me in the right direction that would be great.

  Thank you
  Alastair

  Hello Alastair

  Why make this stupid mistake to hundreds of other owners of laptop?
  It makes sense to check support first and ensure that certain operating system is supported and then installed clean OS. Isn t it?

  Qosmio F60 is portable newest and even not available everywhere in the world, so you must be careful with the support in his favor. The drivers will be offered soon or later, but it may take some time.
  What to do now?

  Return to factory settings or try using some drivers for other models Qosmio with a similar hardware configuration. Try with X 500. It is certainly supported for Win7 x 64. Maybe Toshiba tools and utilities can be installed on your F60.

  Play a little with it. Nothing can now goes wrong.

• Qosmio F60 - new SSD now will not appear in the BIOS or at the Win7 Installation

  I recently bought a new OCZ Vertex 4 128 GB Solid State Drive to upgrade my PC laptop Toshiba Qosmio F60 with.

  After that I installed it first of all, it has been detected immediately in both the bios and during the installation of Windows 7. However, for some reason any approximately 40% of the way through installation, the computer restarts and the drive has disappeared since the BIOS all together and now, after several reboots it does not always detect!

  Note that I already have the latest version of the BIOS installed on my laptop V2.70

  I'm not sure what I would do here and any help would be appreciated?

  Can you please set BIOS to default settings and check if the SSD is recognized in the BIOS again?
  > Please note that I already have the latest version of the BIOS installed on my laptop V2.70
  In my opinion it is not relevant at all.

• Qosmio F60 - boot advanced options existing after the new installation of the OS

  Hello

  I wonder about the option of advanced boot when pressing F8 after that restart the computer will no longer exist if I changed the operating system that was initially provided with my laptop Qosmio F60 "win7" to win 8.1 example

  Advanced Start menu which was part of the in Windows 7 system isn't available in Windows 8/8.1 System.
  Microsoft has changed the architecture of the Windows system in 8 Win/8.1 news and this menu has been replaced.

  Usually if the Windows 8 or 8.1 Windows would not initialize correctly, the system tries to fix the problem automatically. If the system will not be able to fix the problem automatically, the troubleshooting menu appear.

  If you want to manually access menu, you must do this within the system:
  You must open the charm bar (win key + C) then settings-> settings change PC-> update and Recovery-> Recovery-> advanced boot-> restart now

  Here is the article from Microsoft:
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode

• Qosmio F60 - 10 q - Sound is crackling

  Hello!

  I bought a Toshiba Qosmio F60-10 q less that a year ago and after awhile I started having problems with my sound (the sound quality was very bad when the volume is higher than 50% and he made crackling noises etc. + my microphone wasn't working properly either).

  I took it to the population of the warranty and they said they were diagnosed with a card his faulty and they would change it.

  I waited about 2 weeks for the part to arrive and finally came back. Although they said they changed my sound card I'm not sure if that's even possible since I assume it's on board and my MAC differed not in makes me think they have changed entire motherboard or something like that.

  Anyway, the laptop worked fine for 2-3 months and then it started having the same problems. I tried to think, but I really do not know if something specific triggered the problem. I had no time to consider new because I was in an exam session and I really need my laptop atm. My question is this:

  Is a unusual problem and nobody knows what might be the cause of this? I mean if I'm doing something that I shouldn't be, and it is originally this sound card problems I can't really say what it is please any suggestion at all is welcomed!

  Hello

  > Well that they said they changed my sound card I'm not sure if that's even possible since I assume it's on board and my MAC differed not in makes me think they have changed entire motherboard or something like that.
  Don t worry because everything was OK!
  The sound card is fixed/soldered to the motherboard so it s just a sound chip on the motherboard and not actual card. Another MAC address would mean that guys have replaced the chip sound motherboard is also a new. :)

  I can t tell why it happened again but it of the same problem, there is no other way wait for the replacement of the motherboard again. I mean, in the case where part of the material is assigned, you cannot do anything because you need professional help for the motherboard Exchange.

  What you can do is update the audio driver, but I doubt that it could help you

  In any case, I m that you can identify the problem with the technicians as soon as possible and they can tell you how long the repairs would take ;)

• Need serial key of Windows 7 for the Qosmio F60 - 10J

  Hello

  Unmountable Boot Volume Windows 7

  I need to reinstall my Qosmio F60-10J. Reference: PQF65E-007026FR
  but my serial number windows 7 disappeared.

  I have the Toshiba serial number, how do I find information for windows 7?

  Thanks for your help.

  ​

  Hi, I'm also in the same boat.

  Try to do a HARD drive recovery, but my post got renegade to the subforum "valorisation" (where no one responds to the month) even though I submitted it specifically on win7 forum.
  A link for those interested:
  https://Forum.Toshiba.EU/showthread.php?88336

  That's what I've learned so far...

  Option a. You have the recovery disk media or a partition:
  You're lucky and you won't need the product key anyway (it won't be asked during the installation it is 'embedded' kind of talk in image of toshiba).

  Option b. You deleted the partition or replaced the drive and does not follow the manual where Toshiba claims that should have backed up the recovery partition that you probably didn't know that you had in the first place:
  B1. Congratulations, you've reached 80% of the users of this forum which will remain unanswered!
  Here's my sanity check even if the product key was visible on your sticker it would still "invalid" since win7 iso doesn't work for 'standalone' keys then the key to your Toshiba is "pre-installed", i.e. If you do not use the installation of official manufacturers, the I am afraid to say, the key that you have already paid is well... useless!
  B2. But don't worry not toshiba has covered you! for an affordable price of 60 euros, they can send you the installation that you have already paid for.
  ... Wait there's more. Unless you don't have you can use the language option when you try to buy your recovery media. Perhaps, it is still ok if you are ready to learn to finish!

  Good luck ignoring!

  P.S. for stealth Toshiba employees here: never underestimate the damage that an angry customer can bring to your brand!

• Connection dial-up for laptop Qosmio F60/05F

  I need dial-up connection.
  This external modem will work with Qosmio F60/05F laptop under Windows7?
  Hadou none taken for phone cable, not dial-up modem not built inside this Toshiba laptop.

  Visit your local dealer and buy the new external dial-up modem compatible with Win7 64 bit.
  I assume that each of them should work properly. Just be sure that they are supported to 32/64 bit operating systems.