Qosmio G20 - coolant warning/error

Similar Questions

• Qosmio G20-114: Vista upgrade issues - common Module driver is blocked

  I have the Qosmio G20-114 P - M 770/XP MCE /... Part number: PQG20E-00D003EN

  I've upgraded to Vista... and receive a message from driver error driver Toshiba common Module is blocked because it is incompatible with Windows Vista.

  I was running Windows XP MCE. Download a newer version of the driver that would work on this machine and with vista?
  I found a later version of this driver for other models...

  Hello

  No, you can download the latest version of common for Vista modules because the Toshiba has not released drivers Vista for the Qosmio G20

  This error message is displayed on your laptop, because the common modules only work with XP!
  If you want to upgrade XP to Vista you must first remove all incompatible applications.

  See also this thread. It of on the same topic
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21163

• Start Qosmio G20 problem

  I have laptop Qosmio G20, I got error message that my WinXP lost some system files and did not start. I tried to start Windows XP again (I lost the rescue floppy), but my Installer hunged up after 1 minute.

  I tried several other bootable disks including Linux but failed. I suspect this problem in BIOS, I downloaded the BIOS from the Toshiba site, but I have not found all the files PDF with instruction how to create bootable CDs for update of the BIOS listed on the Toshiba site.

  Maybe the problem is in CD/DVD recorder.
  What other way to start my Qosmio G20, I have no USB floppy?

  What do you think of hard drive? Is also possible that you have problems with hard drive?

• Qosmio G20 error message: problem with the cooling system has been detected

  I'm trying to fix a Qosmio G20 (which is about 3 years old, it is no longer in warranty).

  Error message: Warning: a problem with the cooling system has been detected.

  I managed to remove the outer case and observe the operation of the machine, and basically one of the fans does not at all. The fan which is closest to the power connector seems to work very well (he seems to be turning a lot, do not know if this is normal), but the other fan who does not seem to move at all.

  When I put in place the case and on the machine, I noticed after a few minutes the vent of the fan working heat sink had warm enough, while led the non-working fan remained cool.

  I cleaned the fan from dust and have also changed the BIOS battery mode mode high performance, but the problem still exists.

  I would be grateful if someone could give advice if the problem is the fan or something else.

  If the fan is the problem, where I can buy a: i live in the United Kingdom?

  Hello

  I think there might be something wrong with the cooling module and the replacement would be necessary.
  Usually, this should be done by an authorized provider (ASP) in your country.

  Technicians could replace it with a new part and also could renew the thermal grease which is placed between the module and the CPU cooling.

  So contact the ASP in your country and ask for later handling.

  By the way; also, you can buy the cooling of the ASP module!

  Good luck

• Qosmio G20, Toshiba Power saver error

  When I turn the Qosmio G20, I have a message "Toshiba Power Saver, fatal error has occurred, this program will end. Code 0 x 2»
  I click on the 'ok' button and can use the computer, but after using for a while (about 1 hour for example), it becomes very slow. I check the Task Manager and find that "ccSvcHst.exe" takes up 99-100% of CPU usage. I have to turn power off, then again to use another 1 or 2 hours before slowing down again.
  Help, please.

  Have you tried to delete Toshiba saving energy of the system and see if the laptop will slow down again?

  Have you tried to reinstall Toshiba power saver?

• System cooling Qosmio G20-106 problem

  I bought Qosmio G20-106 with XP Media Center and other cool stuff in Vienna a few days ago and it houses (Sarajevo, Bosnia & Herzegovina) presented yesterday and turned on for the first time. It worked perfectly for the first 10 hours. After that I constantly get the message on 'Cooling system problem' and to repair my laptop and click OK.

  My CPU temperature is 57 ° C most of the time, and it raises up to 70-80 ° C Max I hear also cooling fans walk from time to time.

  The system slows down sometimes, but most of the time it works very well and quickly.

  Please give me some advice what I should do, cause I can't resume in Vienna just for that!

  Thank you!

  Hello Dario

  I am very often on this forum, but I've never heard this problem on laptop Qosmio. I put t really know why this happen. Please check this page http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true.
  There you can find a partner to service approved in Sarajevo. Try to contact them and explain this problem with your Qosmio. I hope they can help you. If this isn't the case, you should exchange it one day a dealer where it was purchased.

  If you find more information about this problem please let me know why this happen. I am very interested in this topic.

  Good luck!

• Qosmio G20-139: error creating DVD with MCE

  Hello

  I'm having a problem DVD creation with MCE. I followed all the links, trying to save my recorded TV progs.

  I get on well, until it starts to create a DVD. It only happens to 1%, then he rushes up to 100% and after about 30 seconds it says "dvd creation error".

  I use a G20-139 and the dvd drive is a carpet * a dvd - ram uj846s.
  Help.

  See you soon

  Ogilvie

  Hello

  It is not easy to say what the problem is here, but in my opinion, you should try to use a third party burning application, try to create DVDs.

  I can recommend Nero Express. I tested it on Qosmio G20 and it works perfectly. I also have very good results with Ulead DVD MovieFactory 5. It works perfectly.

• Need new GPU, cooling for Qosmio G20 module

  Anyone know where I can get a new fan for GeForceGo 6600 graphics on my qosmio G20?

  I don't know if this GPU cooling module is m.
  However, all compatible parts can be ordered from the authorized service partner.
  The technician may be able to provide more details on this part.
  As I m not wrong not the FSA can order these parts directly from Toshiba.

  Best regards

• Qosmio G20 - Microsoft Media Center Edition - ehExtHost.exe error

  I started having errors on my Qosmio G20 ehExtHost.exe when pass the screen of Media Center edition to record a television show.

  Language Runtime Debugging current Service ID = 0x17d4 (6100) and id = 0 x 138 (312)

  I have a glance on the web and found a few comments about Norton screwing of the NETWORK settings, I've just updated Norton Internet Security 2009 version so it's possible.

  I have also a message with something not being able to connect to Windows Messenger so don't know why it would.

  I recorded a program and it's OK when I played it back.

  Anyone has any ideas how to solve this problem (or problems)?

  MB

  Googling around you can find so many reports about this. I also found an interesting article on this subject. Please check it out. Maybe it will help you to solve this problem.

  How to solve the ehExtHost accidents that may occur during the launch of Media Center?

• Qosmio G20 - extraction of the error failed THotkey

  Hello

  I have a Toshiba Qosmio G20 at the opening I have a message

  Extraction THotkey failed
  Error code 0 X 00031402, 0x00000002

  I click OK, the window disappears

  I read the topics for this pb
  I ran the antivirus
  I ran Spybot
  I created a shortcut in the menu start THotkey.ex: negative
  I found msconfig that nothing works
  I did 2 restores system to 2 different dates: nothing works
  In addition to what this THotkey?
  Anyone have a solution?
  Thank you

  Hey,.

  THotkey file is the driver for the FN keys on your laptop. I think that it s the Toshiba Hotkey Utility that you can download on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com

  Then check out the page and reinstall Hotkey Utility, it should work. :)

• Qosmio G20 - error TOS0002 when starting

  Hello people, help please if you can.

  Spin a Qosmio G20 (PQG21E)

  Have just re installed windows XP Recovery disk ME, (system crashes earlier), when re-startup error TOS0002 appears.

  Have been through the process of Winhex, as described in a previous thread, but is not no matter what diference.

  Here is the twist. If I boot with the recovery disk in and do not press any button, after a message ntldr failed the system starts fine.

  Can we get out there give me a solution to this very annoying problem, am at my wits end?

  Hi John

  From my personal experience, I know that the Qosmio G20 supports RAID functionality.
  Different RAID settings can be changed in the BIOS.

  In my opinion, you should check whether the RAID settings are on 1RAID-0 or / and RAID-1

  Sometimes the bad RAID don t parameters allow to install the operating system or cause strange error messages.

  Best regards

• Qosmio G20 - left cooling fan turns noise at startup

  After installing the BIOS ver 1.3, when the laptop computer powers until the cooling fan left running so strong, I thought it might burn or smoke.
  After windows has completely turn on the fan turns off after about 5 minutes.

  If I restart the pc, the fan is operating normally.
  Has anyone else had this problem, can I might get their hands on the older version of BIOS?
  It is pulling my hair.

  Hello Anderson

  Sorry, but your ad is a bit confusing to me.

  > If I restart the pc, the fan is operating normally.
  Restart or normally power is almost the same. Updates means you have noticed this fan cooling problem once right after the BIOS?

  Please watch carefully what happens the next few days. If the behavior of cooling is always strange I recommend you contact the service.
  In the end, one thing is strange. Qosmio G20 isn't the newest model and this version of BIOS is not either yesterday, but you are the first person who has noticed this.

• Multimedia "Video Controller" error Qosmio G20 & NO sound

  I have a brand new Qosmio G20. It has been properly installed according to list of instructions installation of Toshiba (all listed in the correct order.

  Unfortunately, whenever I start (WinXP Pro), I received a message that the system has detected new hardware. In the presentation of the material, it lists a "video-controller as" and a "PCI device" that it has not been installed correctly. I tried to solve this by downloading all kinds of latest drivers on the Toshiba site. But apparently the system is still missing some drivers, although I can't know who they should be. Also in this situation, I have no sound available. I tried to reinstall the audio driver. But at the end of the installation procedure, it says that the driver is not found and leaves the facility?

  Help, please...

  Hello

  If you want to identify an unknown in the Device Manager device please read this document:
  http://support.toshiba-tro.de/KB0/TSB57014E000QR01.htm

  In addition, this laptop came with Win MCE. Have you installed the driver on the right its designed for Win XP?

  Best regards

• Qosmio G20 - restore settings factory

  Hello

  Basically I have a Qosmio G20 and here is a brief history of the problem: -.

  (1) Started to get a cooling system warning, after some time the computer turns off.
  (2) stupidly, I ignored the warning system cooling and after a few weeks the computer would start is no longer.
  (3) computer is out of warranty so it took PC World UK for diagnosis.
  (4) PC World says have found 7 viruses (which they said they removed) and said there may be a hardware failure, but they couldn't be certain until they had restored the factory settings for the computer to work properly.

  The problem with restoring the factory settings, this is even though I know that the hard drive is not actually deleted, I'm worried that he would make a few programs and inaccessible files.

  All I want to do is start the Qosmio once while I can:-

  (A) launch Mozilla Firefox and export all my favorites so that I can then load into my new laptop
  (B) export all my Outlook Express emails and loading them in the new laptop.

  With (A) above, I think the only way I can get bookmarks from Mozilla is to launch the program and then use the export option, it doesn't seem to be a way I can just scan hard drives for bookmarks setting the file and back to the top. And as for B), I did a scan of the hard drive and I found the 'dbx' Outlook Express files but when I imported in the new laptop there are a considerable number of missing emails.

  So my questions are:-

  (1) if I restore to factory settings, does this mean that Firefox and Outlook Express would more appear in my programs?
  (2) if not, can start the computer using a Windows CD, and then launch Firefox and Outlook Express directly from the hard drive?
  (3) or, if I plug the hard drive on another computer, you know the exact files (and places) so that I can get all my emails and settings of Firefox?

  Any advice would be appreciated!

  (> A) launch Mozilla Firefox and export all my favorites so that I can then load into my new laptop

  This isn't really a problem. Bookmarks could be saved on external USB flash.
  You can find the bookmarks in your profile in
  c:\Documents and Settings\ [your user name] \Application Data\Mozilla\Firefox\Profiles
  There should be a folder called bookmarkbackups.
  You will find the latest bookmarks from html files.

  Here you can find the FAQ about Firefox. Check * better
  _ http://KB.mozillazine.org/Firefox: _FAQs #Profiles

  (> B) export all my Outlook Express emails and loading them in the new laptop.
  You can save the mails too.
  See the MS page for this:

  + How do I back up and restore Outlook Express data.
  http://support.Microsoft.com/kb/270670

  See you soon

• Qosmio G20-139: failure of the DVD - D: is not accessible

  Hi I have a six month old Qosmio G20-139
  without warning I can't access my DVD player now. No disk will not work and the message: -.
  "D:\ is not accessible. The request could not be performed because of an i/o device error"

  I ran that the pre installed Toshiba diagnosis which confirms the failure
  I went through the process of the device without result Manager
  Any thoughts?

  Hello

  Have you tried to remove the drive from Device Manager?
  If this is not the case, try to do this and then restart the laptop.
  After restarting again the operating system should recognize the drive again.
  Check if it helps.