Qosmio G20: Sonic formatting reports failed when CD - RW formatting

Similar Questions

• Qosmio G20: No HARD drive recognized when installing XP

  I have a problem with my Qosmio G20.
  One of my hard drives was damaged so I bought a new try to reload Windows XP Pro but it came out with an error massege that says: "the installer has NOT FIND ALL disk HARD DRIVES INSTALLED in YOUR COMPUTER.
  But when I check on the Bios it supported hard drives

  I would appreciate any help from you guys

  Hello

  Maybe your Win XP OS does not include the RAID driver!

  Qosmio G20 supports RAID functionality and you must include the RAID driver during the installation of WIN XP by pressing the F6 key.
  The RAID driver can be found on the European driver Toshiba page.

  If you need information more than just posting it here ;)

  Good bye

• REP-56048 PDF report fails when the images in two or more pages

  Hi Experts, I hope you help me with this.
  
  I have a problem running some reports,
  
  REP-56048: engine rwEng-0 blocked., job Id: 425.
  
  These are the logs I found:
  
  1 - INSTANCE_HOME/diagnostics/logs/ReportsServerComponent/ReportsServer_web_FR_inst/rwserver_diagnostic.log:
  
  [2011 12-21 T 08: 02:08.358 - 06:00] [reports] [INCIDENT_ERROR] [REP-50125] [oracle.reports.server] [tid: 14] [ecid: 0000JHWvTl5Fw000jzwkno1EwU1o000002, 0] REP-50125: org.omg.CORBA.COMM_FAILURE: vmcid: minor SUN code: 201 completed: no []
  org.omg.CORBA.COMM_FAILURE: vmcid: minor SUN code: 201 out: No.
  at com.sun.corba.se.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2200)
  at com.sun.corba.se.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2221)
  to com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl. < init > (SocketOrChannelConnectionImpl.java:205)
  to com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl. < init > (SocketOrChannelConnectionImpl.java:218)
  at com.sun.corba.se.impl.transport.SocketOrChannelContactInfoImpl.createConnection(SocketOrChannelContactInfoImpl.java:101)
  at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.beginRequest(CorbaClientRequestDispatcherImpl.java:152)
  at com.sun.corba.se.impl.protocol.CorbaClientDelegateImpl.request(CorbaClientDelegateImpl.java:118)
  at org.omg.CORBA.portable.ObjectImpl._request(ObjectImpl.java:431)
  at oracle.reports.engine._EngineClassStub.shutdown(_EngineClassStub.java:198)
  at oracle.reports.server.EngineManager.shutdownEngine(EngineManager.java:1644)
  at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:1329)
  at oracle.reports.server.JobManager.runJobLocal(JobManager.java:2236)
  at oracle.reports.server.JobManager.dispatch(JobManager.java:1466)
  at oracle.reports.server.ConnectionImpl.runJob(ConnectionImpl.java:1537)
  at oracle.reports.server.ConnectionPOA._invoke(ConnectionPOA.java:460)
  at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:637)
  at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:189)
  at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1682)
  at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1540)
  at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:922)
  at com.sun.corba.se.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:181)
  at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:694)
  at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:451)
  at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1213)
  to com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$ WorkerThread.performWork (ThreadPoolImpl.java:471)
  to com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$ WorkerThread.run (ThreadPoolImpl.java:500)
  Caused by: java.net.ConnectException: connection refused
  at sun.nio.ch.Net.connect (Native Method)
  at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:507)
  at java.nio.channels.SocketChannel.open(SocketChannel.java:146)
  at com.sun.corba.se.impl.transport.DefaultSocketFactoryImpl.createSocket(DefaultSocketFactoryImpl.java:60)
  to com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl. < init > (SocketOrChannelConnectionImpl.java:188)
  ... 23 more
  ]]
  
  
  2 - INSTANCE_HOME/diagnostics/logs/ReportsServerComponent/ReportsServer_web_FR_inst/console~ReportsServer_we_FR_inst~1.log:
  
  21-Dec-2011 08:02:08 < init > com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl
  ADVERTENCIA: "IOP00410201: connection failure (COMM_FAILURE): socketType: IIOP_CLEAR_TEXT; HostName: 127.0.0.1; Port: 34416 "
  org.omg.CORBA.COMM_FAILURE: vmcid: minor SUN code: 201 out: No.
  at com.sun.corba.se.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2200)
  at com.sun.corba.se.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2221)
  to com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl. < init > (SocketOrChannelConnectionImpl.java:205)
  to com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl. < init > (SocketOrChannelConnectionImpl.java:218)
  at com.sun.corba.se.impl.transport.SocketOrChannelContactInfoImpl.createConnection(SocketOrChannelContactInfoImpl.java:101)
  at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.beginRequest(CorbaClientRequestDispatcherImpl.java:152)
  at com.sun.corba.se.impl.protocol.CorbaClientDelegateImpl.request(CorbaClientDelegateImpl.java:118)
  at org.omg.CORBA.portable.ObjectImpl._request(ObjectImpl.java:431)
  at oracle.reports.engine._EngineClassStub.shutdown(_EngineClassStub.java:198)
  at oracle.reports.server.EngineManager.shutdownEngine(EngineManager.java:1644)
  at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:1329)
  at oracle.reports.server.JobManager.runJobLocal(JobManager.java:2236)
  at oracle.reports.server.JobManager.dispatch(JobManager.java:1466)
  at oracle.reports.server.ConnectionImpl.runJob(ConnectionImpl.java:1537)
  at oracle.reports.server.ConnectionPOA._invoke(ConnectionPOA.java:460)
  at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:637)
  at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:189)
  at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1682)
  at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1540)
  at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:922)
  at com.sun.corba.se.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:181)
  at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:694)
  at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:451)
  at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1213)
  to com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$ WorkerThread.performWork (ThreadPoolImpl.java:471)
  to com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$ WorkerThread.run (ThreadPoolImpl.java:500)
  Caused by: java.net.ConnectException: connection refused
  at sun.nio.ch.Net.connect (Native Method)
  at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:507)
  at java.nio.channels.SocketChannel.open(SocketChannel.java:146)
  at com.sun.corba.se.impl.transport.DefaultSocketFactoryImpl.createSocket(DefaultSocketFactoryImpl.java:60)
  to com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl. < init > (SocketOrChannelConnectionImpl.java:188)
  ... 23 more
  
  
  
  3 INSTANCE_HOME/diagnosis/logs/WweCache/webcache1/event_log:
  
  [2011 12-21 T 07: 34:39 - 06:00] [webcache] [NOTIFICATION: 1] [TABLE-09608] [main] [ecid:] the cache server process started successfully.
  [2011 12-21 T 07: 34:44 - 06:00] [webcache] [WARNING: 1] [TABLE-12104] [utl] [ecid:] process of a failing page Oracle Web Cache
  
  
  
  
  I have:
  Fusion middleware
  DB11g
  WebLogic Server 10.3
  Forms and reports 11.1.1.3
  
  
  help please.

  I fix my problem upgrading FMW 11.1.1.4 and weblogic server 10.3.4.
  Thank you all.

• "GRADIENT ARRAY" message on my Qosmio G20

  Hello world

  I have a qosmio g20 and for some reason when I start the following message is displayed:
  DEGRADES in TABLE-1.

  I have all tried allmost, uninstall the raid utility, formatting the discs, but I still get the same message.
  Also, I get the same message when I try two mirror disks. When you get to 90% of the mirroring of an alert is displayed again indicating "table 1 gradient, a drive is missing.

  Hope someone can help me.

  Thank you very much
  Kozach75

  Hello Kozach75

  This message appears if the RAID controller detects a problem with the HARD drive. On this path, it is not possible to say why this is happening, but there may be a serious hardware problem. Please contact the Service partner and let check the device. G20 is a new unit and the warranty will cover all costs.

  Check this page http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true.

  Good luck!

• Qosmio G20: cursor jumps typing the letter

  Hi everyone, my Qosmio G20 gives me headaches! When I try to type a letter or article suddenly the cursor jumps back lines and I find myself typing in the middle of a previous sentence. Then sometimes it just deletes a paragraph I just typed.
  Any suggestions as to why? And more importantly on how to behave?
  I would be happy to advice.

  Thank you.
  Ronnie

  Yes, it's because of the touchpad. To disable and enter in peace, just press Fn + F9. This will temporarily disable the touchpad. When you are finished typing, press Fn + F9 again, it will re-enable the touchpad.
  Later,.

  Alcahest

• Qosmio G20: How to format the HARD drive?

  Hello!

  I bought Qosmio G20 last week and now I want to install Windows XP MCE (not recovery, but a CD in Windows XP CD) on this subject but I have a problem formatting of hard drives. There are two hard disks, and when I try to put in the form of Win 98 it is said as "formatting is not supported on C:" or "formatting is not supported on D:". I want to do before installing new windows because I want to create multiple partitions, but to do that I need to format the disc first.

  Can someone tell me what I need to do to format discs in this way?

  Hello

  You cannot format the HARD C drive because the operating system is running on this HARD drive.
  What you can do is to use the 3rd party software that creates the partitions on the HARD disk on the system running. I use partition Magic 8 to create and manage partitions.

• Qosmio G20: password asked after formatting my HARD drive

  Hello
  I have a qosmio G20, after having a virus on my computer, I decided to take my HDD in and formatted within an external box, but when I tried to install Win XP on it after reinstalling the HARD disk the computer asks me a password.
  can someone help me please...

  All the action you described confused me. Please let HDD inside your laptop and delivered using recovery DVD for the installation of the OS and everything will be OK.

• Qosmio G20 has white LCD diplsay. OK when it is used with screen external en

  I hope someone can help. Qosmio G20 has full white LCD.
  The backlamps are on and the laptopworks fine when used with screen external fr.
  I guess it's probably the motherboard, any ideas?

  Most people would say that if it worked, say, a couple of days and you can't even start on your LCD screen, then the screen or its cable or mobo circuit feeding the LCD failed.

  I had this on another laptop too, and Toshiba are not something so special that this kind of thing is not generally a valid diagnosis.

• Qosmio G20 - error TOS0002 when starting

  Hello people, help please if you can.

  Spin a Qosmio G20 (PQG21E)

  Have just re installed windows XP Recovery disk ME, (system crashes earlier), when re-startup error TOS0002 appears.

  Have been through the process of Winhex, as described in a previous thread, but is not no matter what diference.

  Here is the twist. If I boot with the recovery disk in and do not press any button, after a message ntldr failed the system starts fine.

  Can we get out there give me a solution to this very annoying problem, am at my wits end?

  Hi John

  From my personal experience, I know that the Qosmio G20 supports RAID functionality.
  Different RAID settings can be changed in the BIOS.

  In my opinion, you should check whether the RAID settings are on 1RAID-0 or / and RAID-1

  Sometimes the bad RAID don t parameters allow to install the operating system or cause strange error messages.

  Best regards

• Qosmio G20: How to repair Windows without formatting?

  Hello
  I have a qosmio G20 bought in October 2005. I need to repair my OS. The CD/DVD provided with the Windows XP MCE do not provide an option 'fix' as one provided when you buy a copy of Windows. How can I repair my OS without format my laptop?

  Thanks in advance for your kind cooperation

  Antonis

  The supplied restore CD does not contain the repair console because it s not an original Windows CD. The restore CD contains only an image of the files. Don't mix it with the CD of Microsoft!

  To get into the repair console, you will need the original CD of Microsoft Windows.
  I also read on the Microsoft site that it of possible to download the repair on 6 discs FDD console. Then you could boot from this drive FDD and you might be able to get into the repair console. But I have never tested this procedure.

  I found this useful MS document also how to install and use the Recovery Console in Windows XP
  http://support.Microsoft.com/kb/307654

• Screen is blank when Qosmio G20 starts up

  When I turn on my Qosmio G20-110 I hear the usual chimes and on my LCD backlight lights up but nothing else on the screen.

  Any ideas?

  Hello

  Have you plugged an external monitor to the laptop? Maybe it s something wrong with the display internal and so you can see anything on this subject. It s worth a try because you can check this in a few minutes.

  But I guess that it s a hardware problem with the display internal and/or mainboard or something other than your laptop must be verified in professional people, they can disassemble the laptop and exchanging parts of equipment.

  On the Toshiba site, you can search the nearest service provider authorized good luck!

  Welcome them

• Qosmio G20 failed during the installation of SP3, now bluescreens on startup!

  Qosmio G20 failed during the installation of SP3, now bluescreens on startup!
  Any suggestions?
  I can't restore to a date prior to the node without danger, he keeps failing?
  Please help me...

  Hello

  Have you tried booting with the CD of Microsoft WXP facilities and try to fix it?
  Sorry, but I don't see any other solution.

  A few months ago, I got a blue screen after installing the new software. I tried to do the same with the safe mode and system restore, but it has not t worked for me.
  At the end I backed up all my important data and installed new WXP.

• Qosmio G20: Fan makes an awkward noise when he turns around

  Hey everybody,
  Another problem, but not Vista! Although it is always a problem!

  My exhaust fan makes a clunky noise when it runs. I hear it's going along and round like a noise of rachetty and then at other times its fine.

  Someone at - he had this?
  Should I open and give it a clean?

  Hello

  It's not easy to tell if the fan is malfunctioning or not.
  Qosmio G20 is a laptop very powerful and cooling modules are larger and stronger as modules on any of cooling for powerful laptop.
  If you use the solid performance applications such as games or videos of the cooling modules will work with maximum performance and are stronger.

  But of course; the cooling module could malfunction. In this case, it must be replaced.

• Qosmio G20 - extraction of the error failed THotkey

  Hello

  I have a Toshiba Qosmio G20 at the opening I have a message

  Extraction THotkey failed
  Error code 0 X 00031402, 0x00000002

  I click OK, the window disappears

  I read the topics for this pb
  I ran the antivirus
  I ran Spybot
  I created a shortcut in the menu start THotkey.ex: negative
  I found msconfig that nothing works
  I did 2 restores system to 2 different dates: nothing works
  In addition to what this THotkey?
  Anyone have a solution?
  Thank you

  Hey,.

  THotkey file is the driver for the FN keys on your laptop. I think that it s the Toshiba Hotkey Utility that you can download on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com

  Then check out the page and reinstall Hotkey Utility, it should work. :)

• Qosmio G20 - how to get rid of his TV tuner when I use the Webcam?

  I was installing just my Logitech Quickcam Fusion on the Qosmio G20.

  I can not get rid of the sound the TV tuner, it is white noise because there is no antenna connected. Playback is selected SigTelAudio and I can't find any way to stop it.

  Martin

  Try this...

  1 - go to control panel, click System.
  2 - Select the Hardware tab, Device Manager.
  3-open "audio, video, and game controllers", Double click on «Toshiba PCI DVB - T...» ".
  4 - Select the Properties tab, open "Audio Devices", Double click on 'Toshiba Audio Capture.
  5. Select "Do not use features on this Audio device ' or 'Do not map through this device', try both.