Qual a configuracao SAS best?
BOM dia amigos,
Alguem sabe aqui me say qual a better option of configuracao na placa SAS rodando o ESXi 4?
UM amigo otimizar says para best performance (enable o writing or back writing throught, nao single, com a force option).
Alguem ja esta configuracao Fez? Realmente melhora o shivers RAID?
Meu servidor e o Dell R710 e pretendo use o RAID 5.
Obrigado
Ferraz Junior
Da uma take nessa pirates, nao sei to ajuda, mas - http://communities.vmware.com/thread/148775
Por favor, não don't atribuir os pontos para e resposta 'useful' or 'correta.
Mauro Bonder - moderator
Se a sua question faith respondida, mark "Answered" como para o topico can.
I do a test:
do vmotion THAT changed VMID.
Tags: VMware
Similar Questions
-
Expansion PV MD3200 tagnumber 8H2F5Y1
Buongiorno.
HO a virtualizzato con 2 host PowerEdge R620 sistema (tag B85H5y1 - 485H5y1)
Ed uno PV MD3200External SASRaid 12 storage bays arraywith two controllers
con da brain installation 12 600 GB SAS
Ho un'esigenza di add 2 o 4 GB in raid 5
Qual'e the area best suited solution (works report prezzo / prestazioni)?
Grazie
Franco Berti
Consorzio continuous Storo
Tel. 0039 465296994
Buongiorno, it forum if held solo di is parent a HW guasti. Per quanto ricuarda su information modernize deve rivolgersi al servizio commercial o a UN partner di zona.
Todas
-
VDI, qual one best solution no momento?
Senhores, vamos speak serio aqui no forum fun.
MAS vamos la: Para os senhores qual e VDI madura confiavel atualmente but esta Solução?
Seria a Solução da Citrix, da Microsoft or Vmware.
VDI e um assunto as muito me interested espero esta Solução aqui oferecer e na nossa empresa, como sou professional virtualizacao than pretende trabalhar com as 03 tecnologías, preciso conhecer bem cada uma delas.
Apesar of e usar of Hyper-v Server Xen em some clients, o carro leader no qual procuro gender os fasci e o Vmware.
Aguardo comments back senhores e obrigado.
ESSA Apresentação Gartner tem um legal comparativo as Soluções of virtual office.
-
Hello to all,
HO a client currently has una configurazione che con singolo e storage FC Dual Controller is al server point to point.
Vorrebbe una soluzione completely nuova:
2 host nuovi
1 SAN in SAS
Così da poter utilizzare HA; HA una essential Plus licenza gia.
Domanda, qual'e seconda vostra esperienza, the best solution by migrare I datastore da una SAN - FC ad una nuova SAN - SAS?
Grazie in pre-empted by the risposta
UNA possibility it could essere questa:
Enter una sul vecchio SAS hba hosts.
Colleghi it nuovo presenti nuove lun storage.
Tramite Storage vMotion migri the VM. Per farlo a tipo caldo ti will serve una licenza Standard. You can use Eval una.
The sposti oppure a freddo.
POI colleghi I have Microsoft host al nuovo storage nuovi. Migri tramite vMotion VM.
Server Elimini it vecchio.
SE non you can take una hba in più, una delle nuove ricicli e fai a cluster a temporary 2.
Spero di essere stato chiaro
Ciao
-
HP Envy 15t: ads by SASA
Hello-
Have a little problem on my new machine. I started my work software installation process. Somewhere along the line, I picked up some malware that appears in the form "ads by SASA. Much of appears and displays now show. I have run several types of malicious and spent an hour on the phone with the concierge service and I can't get rid of this malware infection. I also searched internet and nothing I can find really works. Looking at the control panel and all the programs that are installed, there is nothing suspicious. Does anyone have any suggestions?
Things I'd like to try but may not know:
-I want to reset IE 11. I went through these steps, but in the end, I have a red X (that is to say, fail) on reset customizations. How can I make this? Of course, the malicious software has somehow obtained in IE.
-J' have another program scrub of malware which like to use my work COMPUTER service. He works outside the Windows environment but requires that I boot on the USB bootable. I tried and tried to make the computer do cela, but do not understand how to change the BIOS to do this. I want to run the other program.
-Finally, if none of the above works and there are no other options, I think I'll have to do a factory reset. Not too big of a deal, but all the programs that have been installed by my computer work will need to be reinstalled. All other programs I have installed have disappeared.
Thanks for any help.
Kurt
Hi Kurt,.
I know how frustrating it can be, I spent all the way.
However, after a few attempts, resolved in this way, for me, and after that for some of my friends:
Emsisoft and Malwarebites are free to use, no need to buy them. You can download, scan and remove malicious software free of charge. You pay the option upgrade to the pro version which offer protection in real time, I do not have, and I want to advice to anyone.
Malwarebites has taken time to find malware, Emsisoft have a smart scan option, so it takes less time to find and remove.
After that, I have run Ccleaner, clean cookies, temporary files and other places where traces can be hidden.
After that, IE restored without problem.
If stil you want to run your program scrub of malware you mentioned before, it is good to take a look at the HP document:
http://support.HP.com/us-en/document/c03736054
I'm sure that you will solve your problem.
BTW, my PC where I have the same problem was an asus . Solution to this problem was not found on their forum.
All the best!
Dindin
<>
* Click on the star of CONGRATULATIONS on the left say "thank you."
Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
-
Best Poly Fit Coefficients do not match the best Poly Fit 2
Hello
I have dataset with 9 points and want to adapt or to solve linear equations with coefficient 9. The model - equation is then
Z = a0 + a1 * x + y * a2 + a3 * x ^ 2 + a4 * x * y * + a5 * y ^ 2 + a6 * x ^ 7 * x + 2 * y * y ^ 2 + a8 * x ^ 2 * y ^ 2; coefficient 9 total EQ.
When I create the matrix H and send data to 'General linear Fit' it returns coeffcients and the best fit. Better adapt works well but I don't know how to interpret a coeficients.
All the math of it works well when the function is second order polynom, for example, when there coefficient a0 to a5.
Thanks in advance.
Sasa
You're right, it works!
I fix error of 11 to 1, but also the algorithm must be "acquired" and then match.
Thank you!!!
-
450 GB sas Disco by UN EQL 10krpm
Buongiorno,
serving mi quotazione by n.1 sas disco da 450GB da 10krpm by EqualLogic PS4000X fuori co UN
Come posso fare?
Grazie thousand
Google translation:
Hello, I need citation for disc # 1 of sas of 450 GB 10krpm for EqualLogic PS4000X out of warranty, how can I do? Thank you very much
Response by Google Translate:
Ciao, this sound some siti web che vendono advantage best-known EqualLogic. MI dispiace my non e possibile acquistare i nuovi is TR no has a contratto di servizio Saluti,
Hello, there are sites that sell second-hand parts Equallogic. I'm sorry, but you can't buy new ones if you don't have a service contract.
Kind regards
Don
-
Guidelines for best performance MS SQL server on EQL
Hello
Currently, I have a VM that the C: drive of the system as a disk VMDK on a LUN in a table of PS6100XV (24x600GB 15 k SAS drives).
This logic unit number is shared with other virtual machines.The data and logs is on the D: drive which is a MS iSCSI initiator attached volume on the same table of PS6100XV.
I think to create two volumes on the Bay and move the data and logs to the respective volume. Will this increase performance or it won't make a difference because the table is a part of 24 disks with a pool. What about braces?
Can I create different pools and put the different volumes on these pools so volumes using different storage arrays which gives best performance? What is the optimal configuration of the eql to host SQL volumes?
Thank you
You certainly want to separate EQL volumes for logs and data. It was a best practice for a long time, with or without virtualization. The operating system has a queue of SCSI for both of these "readers" since there is in fact only a single drive.
If you have not already you must configure the EQL MPIO customer volumes and install HIT / ME software, available on the site Web of Equallogic. That will optimize the I/O of these volumes.
If you do that a single physical Bay, you can have only one tank. If you have two arrays of members, you may have one in swimming and one in the other. There is no way to split a single physical table on more than a pool.
Kind regards
-
Upgrade the disks in RAID 6 array: what is the best
I have a Dell PowerEdge 2900 running Windows Server 2008 R2 and 6 x 75 GB 10K SAS drives. PERC 6 / i controller RAID 6 with 5 drives + HS 1 (total 6 discs)
I have 6 x 300 GB 10K SAS drives ready to trade.
I read everything I can on hot swapping etc and what I can't find is any method to close the front discs actually pulling them. Supposed to be via Computer Manager-> storage but not here?
Restarted, Ctrl + R, in the controller BIOS, nothing there either.
I have therefore 2 options:
(1) go for it, just pull up a disc and put in a new and let them rebuild. Repeat x 5
(2) stop, change the music, etc. I don't like to stop a perfectly functional server...
Looks like #1 would be better, but without the stop disk option I'm not sure...
Then there is the whole operation in general. It is best to:
(1) hot-swap & rebuild
(2) make a backup to disk image, on all readers of a sudden and restore?
Looks like #2 would be better... but I don't still need to re - install the software on the array of naked?
Hello
budcarlsonI read everything I can on hot swapping etc and what I can't find is any method to close the front discs actually pulling them. Supposed to be via Computer Manager-> storage but not here?The operating system has no control on the disks. The drives are controlled by the PERC. You must use either a software that allows the management of PERC as OpenManage Server Administrator or boot directly on THE controller's BIOS.
You should have an option available for the physical disks offline before removing a table. Which will allow you to remove a disc without causing data corruption.
budcarlsonThen there is the whole operation in general. It is best to:
(1) hot-swap & rebuild
(2) make a backup to disk image, on all readers of a sudden and restore?
Looks like #2 would be better... but I don't still need to re - install the software on the array of naked?
The best practices and the method supported is to back up the data, create a new RAID array with new drives, reinstall, and then restore the backup.
Hot swapping and reconstruction are the best way to do this, but the simplest is not the best way. If you choose to rebuild and hot-swappable, you will also need either to create a new RAID array (sliced table) to use the new space or change the markup for the table.
Thank you
-
I bought dell r710 serve now I buy hard disks sas, I found this two on ebay
HITACHI Ultrastar C10K900 HUC109090CSS600 900 GB, internal, 10000 rpm, 2.5 "
[See:www.ebay.com/.../191302924603]
and
DELL/SEAGATE ST9900605SS ST9900805SS 10K.5 900 GB 10K 6G SAS
[See:www.ebay.com/.../321445423456]
that one can recommend me?
What is the best?
which is more stable and reliable?
Excuse me for my bad English
Best regards
Make sure you get a warranty - if you end up buying an OEM drive, it will not have everything.
Is either a decent choice (but note that Hitachi/HGST is now Western Digital).
-
SAS HBA or Raid for R905 for external storage?
So I got a R905 used off ebay. I wanted to use it for a storage server. Unfortunately, the LSI SAS HBA or the Areca 1883 work in one of the 7 pci-e slots. The cards are seen and their bios are launched and start automatic and other tests. Two of them crash during initialization (it is not a matter of waiting a few minutes - in a trial, let him so all day while I was out). I know that the slots are not dead, like the map 4-port gbe enet provided with it works great, just like a connection-x 2 infiniband card. I confirmed that the bios and bmc firmware are the latest and best. It's a kind of dell 'we do support the controllers dell' thing? If so, I guess I agree with the purchase of a dell SAS HBA connector sff-8088 with random (since that's what jbod I want to connect using...) Any thoughts appreciated...
Hello.
No Dell non-certified controllers are not validated to work properly on Dell servers. But this does not mean that may not work, it's a 50-50 chance. I recommend using certified Dell SAS HBA card such as: manufacturer: 7RJDT | Dell reference: 342-0910. Not so sure on the type of connector
-
Best VPN debugging commands?
Hello
I was wondering what your best VPN debugging commands are on an ASA or the router about the phase 1 and 2 and the ACL?
For example I have a site-to-site between 2 ASAs and phase 1 and 2 are on the rise, but each site cannot ping a PC on each site. I'm looking to NAT and ACLs for the moment, but all useful commands would be most appreciated.
Thank you
Two 1 go - to orders are:
ISAKMP crypto to show his
Crypto ipsec to show his
If the Phase 1 and Phase 2 are not upward by these respective commands, then go to:
Debug crypto isakmp 7
Debug crypto ipsec 7
You may need to increase the verbosity level (255 is the highest) and, if you have multiple SAs, focusing on those that you are interested in with a filter:
Debug crypto peer condition
Once you have Phase 1 and 2 but established that you are experiencing persistent problems with two-way traffic flow, look at two things:
1. at the exit of his see the crypto ipsec, decaps proportional increase with the program. If this is not the case, the remote line can't get the return traffic. Confirm with a capture of packets and/or track.
2. use the command packet - trace (CLI or GUI) on the SAA to review how it will handle a given stream. NAT and ACLs questions often are quickly visible using this tool.
-
Love tunnel SAs negotiated, but do not survive.
Background
We have a stable P2P GRE + IPSec configuration to multiple rays using signatures rsa for authentication ISAKMP and EIGRP as the routing protocol. We are in transition to a love (DMVPN) configuration. GRE P2P tunnel interfaces are administratively shutdown, cryptographic cards on physical interfaces have been removed and the cryptographic database has been erased.
Question
When implement us the interfaces of tunnel love (Star), we are able to complete the ISAKMP phase I and II (briefly). However, ~ 1-1/2 minutes more, we see a message from debug on the hub, such as:
13:56:49.601 Jul 21 EDT: IPSEC (cleanup_tun_decap_oce): Unlock and null to Tunnel0 tun_decap_oce 86742E48 of 86FB990C of ident
... and then the IPSec SAs are deleted, the tunnel down, IKE_PHASE2_DEL and IKE_PHASE1_DEL messages are generated and start with phase I ISAKMP negotiation.
Anyone know what the 'CEO '?
Highlights of debugging (ISAKMP and IPSec)
13:55:13.188 Jul 21 EDT: ISAKMP: (2597): SA authentication status: authenticated
13:55:13.236 Jul 21 EDT: ISAKMP: (2597): former State = new State IKE_R_MM5 = IKE_P1_COMPLETE
13:55:13.356 Jul 21 EDT: IPSEC (create_sa): its created.
13:55:13.356 Jul 21 EDT: IPSEC (create_sa): its created.
13:55:13.356 Jul 21 EDT: % CRYPTO-5-SESSION_STATUS: Crypto tunnel is MOUNTED. Peer: 500 Id: spoke.domain.null
13:55:13.356 Jul 21 EDT: % DMVPN-7-CRYPTO_SS: Tunnel0-socket is in PLACE
13:55:13.700 Jul 21 EDT: ISAKMP: (2597): former State = new State IKE_QM_R_QM2 = IKE_QM_PHASE2_COMPLETE
13:56:49.601 Jul 21 EDT: IPSEC (cleanup_tun_decap_oce): Unlock and null to Tunnel0 tun_decap_oce 86742E48 of 86FB990C of ident
13:56:49.601 Jul 21 EDT: IPSEC (delete_sa): deletion of the SA.
13:56:49.601 Jul 21 EDT: IPSEC (delete_sa): deletion of the SA.
13:56:49.601 Jul 21 EDT: % CRYPTO-5-SESSION_STATUS: tunnel Crypto is out of SERVICE. Peer: 500 Id: spoke.domain.null
13:56:49.601 Jul 21 EDT: ISAKMP: (2597): entry = IKE_MESG_FROM_IPSEC, IKE_PHASE2_DEL
13:56:49.605 Jul 21 EDT: ISAKMP: (2597): entry = IKE_MESG_INTERNAL, IKE_PHASE1_DELNote: A more complete debug output is attached.
General comments (sh crypto isakmp, ipsec crypto sh its)
ISAKMP Security Association reached a State of QM_IDLE and active status. However, the SA is removed and a new is generated on the breast of ~ minute.
IPSec security associations are negotiated on the hub and the spokes. However, only speak it a program package, and only the hub has decaps. Wireshark confirms that the hub does not all ESP packets on the wire. The IPSec SAs are deleted and the new spawn every minutes ~ 1-1/2.
See the output of the command
hub #sh cry ipsec profile
Profile IPSEC DMVPN
Life safety association: 4608000 Kbytes / 3600 seconds
Answering machine-only (Y/N): N
PFS (Y/N): Y
Diffie-Hellman group: group2
Transform sets = {eni-xfm-des: {esp - esp-sha-hmac}, eni-xfm-3des: {esp-3des esp-sha-hmac}}hub #sh cry map
Card crypto isakmp-65536-"Head-Tunnel0-0" ipsec
Profile name: DMVPN
Life safety association: 4608000 Kbytes / 3600 seconds
Answering machine-only (Y/N): N
PFS (Y/N): Y
Diffie-Hellman group: group2
Transform sets = {eni-xfm-des: {esp - esp-sha-hmac}, eni-xfm-3des: {esp-3des esp-sha-hmac}}Card 'Head-Tunnel0-0' 65537-isakmp ipsec crypto
Map is a PROFILE INSTANCE.
Peer =.
Extended IP access list
access-list allow accord host host
Current counterpart:
Life safety association: 4608000 Kbytes / 3600 seconds
Answering machine-only (Y/N): N
PFS (Y/N): Y
Diffie-Hellman group: group2
Transform sets = {eni-xfm-des: {esp - esp-sha-hmac}, eni-xfm-3des: {esp-3des esp-sha-hmac}}
Interfaces with card crypto Tunnel0-head - 0:Tunnel0HQ-edg01 #sh cry session detail
Current state of the session cryptoInterface: Tunnel0
Duration: 00:00:10
The session state: UP-ACTIVE
Peer:port 500 fvrf: (none) ivrf: (none)
Phase1_id: spoke.domain.null
DESC: (none)
ITS IKE: localremote 500 500 Active
Capabilities: (None) connid:2682 life time: 23:59:47
ITS IKE: localremote 500 500 inactive
Capabilities: (None) connid:2681 life time: 0
FLOW IPSEC: allowed host 47host
Active sAs: 2, origin: card crypto
On arrival: dec #pkts'ed 6 drop 0 life (KB/s) 4517257/3589
Outbound: #pkts enc'ed drop 0 0 life (KB/s) 4517258/3589Material & IOS
C1811 (hub) - c181x-advipservicesk9 - mz.124 - 24.T
c1711 (spoken) - c1700-advipservicesk9 - mz.124 - 15.T9Follow the relevant parts of crypto configurations DMVPN (hub / talk):
crypto ISAKMP policy 3
BA 3des
Group 2
life 86399ISAKMP crypto identity hostname
Crypto ipsec transform-set eni-xfm-3des esp-3des esp-sha-hmac
transport mode
Crypto ipsec transform-set esp eni-xfm-des-esp-sha-hmac
transport modeProfile of crypto ipsec DMVPN
3600 seconds, life of security association set
the value of the transform-set eni-xfm-des eni-xfm-3des
PFS group2 Setinterface Tunnel0
IP255.255.255.0
Protection ipsec DMVPN tunnel profileNote: PNDH, love, and no other settings have been chiselled.
Any help would be appreciated.
Best regards
MikeYou are right your comment.
The previous interface of p-BRMS (in your case) can get his information in to
the tunnel endpoint database (packages of controls tunnel) even if the
p BRMS tunnel is stopped. It is also in the code a GRE packet
destined to the router will search a mathc with a p-BRMS tunnel before
Love tunnels. If the GRE tunnel packets were getting "caught".
by p-BRMS tunnel and then dropped.
If I really want a GRE tunnel to be 'down', I'll remove the "source of the tunnel...". ».
If I have two tunnels upwards at the same time, I do what you do, give
each of them a different tunnel key or a different source of tunnel.
Hope this helps to understand what was going on.
Mike.
PS. You should be able to mark it as answered present.
-
T310 with sas 6/ir controller replace has no disk in raid
I have a T310 with a sas 6 / ir RAID controller. One of the disks in a raid 1 is a failure. What is the best way to replace the defective drive?
Sorry... I forgot SAS 6 supports can't "make offline". Just remove it.
-
SAS/SATA mixed pool and initial data placement
Assuming that I have a mixed pool of SAS and SATA drives, where new written land? My concern is that Scripture arrive on SAS and SATA also and then over time the SATA data would be transferred to SAS has high performance and data on SAS are cold it shifts to SATA.
I'm leaning toward a configuration that initially all written in SAS assuming it must be efficient and then over time, move down to SATA. It seems that this is possible.
I am looking for clarification and perhaps a document that could help me understand how to set up my table for everythying lands on fast and down to slow down over time.
It does not work like that. When you have several members in the same pool, the data is distributed across members in proportion to their relative sizes. So more data on the volume will reside on the SATA member since he will be probably larger disks. This is especially true is the SAS is R10 and SATA R50/R6. Which is pretty common.
In the 5.2.x, firmware if berries are very busy most of the time, the balancer will swap blocks filled with blocks of idle until they members have better balanced latency. Short term transitional IO load balancer will only be active often.
You can set preferences RAID in volume, if the members are at different levels.
You can bind a volume to a member of the one.
However, the best thing is to start with the group with SANHQ monitor. This will help you find what type of i/o load you put on the group. In addition, if you open a support account sometimes this data is also valuable to support.
Maybe you are looking for
-
Replacement of text disappeared after upgrade ios 10.0.1
I have an ipad 9.7 pro and an iphone 5s I've updated the IOS 10 software and the iPad don't would not recognize the charge lead, the apple store has replaced the ipad. After receiving the new ipad, I went to restore from my latest icloud save. Since
-
programmatically change the range structure case
I think I already know the answer to that, but I'll ask anyway. In the attached picture, is it possible to programmatically change the range of numbers used by the case? Tay
-
HP model 15-f039wm: Admin / power on password
Can't turn on/administrator passwordStop code 6915036
-
Windows Vista - Windows Mail - creation of Contacts Group__
Trying to create a group of Contacts. Help says -Opening of Contacts-On the toolbar, select new group of Contacts - BUT THERE IS NO SUCHOPTION - HELP!
-
Application of distribution exported opens but not set correctly by BB10 SDK 3.2.1
I was wondering if anyone has seen this before / knows how to fix? Using the SDK BB10 3.2.1 installation a debug or release in the Simulator (10.2) works fine, however, if I Pack as an exported version Release, the UI on my app is all messed up (acti