Quantum and Esxi 4.1 tape library

Similar Questions

• Driver for IBM TS3100 Tape library. for windows 2008R2 and DPM 2010

  I installed DPM 2010 in the edition of Windows 2008R2 STD. I am using the IBMTS3100 tape library. Windows detects the tape device but media changer appears as unknown medium changer. I cannot see the details of the driver for the medium changer and means 'no driver file is required or have been loaded for the device. When I try to update the driver, it says already installed the latest driver for the device.

  Now the question is DPM does not detect the slots in the tape library.

  I have installed Symantec Backu Exec in the same server and everything works fine.

  If anyone has the driver for the device please inform else we are go to Backupexec... :(

  Hello

  The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/DPM

• Nexus 5000 native FC disk array and tape library

  Is it possible to have servers to connect by FCoE to nexus 5000 switches as well as native berries FC of attached disk and tape library without requiring additional CF as the MDS 9000 switch? The reason why I ask, is that all the patterns I've seen on consolidated IO to this point show switches connected to the FC ports native on the nexus 5000 MDS. I thought that the Nexus 5000 would be able to replace the MDS attaching devices FCoE and native Fibre Channel devices. You see only such a diagram has me second guessing my initial thought.

  Yes, you can use FCoE and FC of Nexus 5000 to connect to networks. I tested and it works very well without any problems.

  FCoE, you have module FCoE in the bays and the appropriate license.

  RAM

• VM connection fiber Tape Library

  Is it possible to let the virtual machine see 4.1 fiber tape library using NPIV? is it supported?

  Thank you

  See page 29 in the Guide of Fibre Channel SAN Configuration

  ESX/ESXi does not support the connected FC tape drives.

• VMDirectPath - IBM TS2900 tape library

  Pessoal,

  Tenho o seguinte ambiente:

  IBM X 3550 M3 com interface externa Symbios LSI Logic SAS LSI1068E SAS

  IBM TS2900 (tape library)

  USO ESXi 4.0.0 208617

  Comments executa Enterprise of Windows 2003 x 64.

  Configurei o para VMDirectPath has LSI1068E SAS (Passthrough)

  

  Adicionei uma interface PCI e instalei o pilot da LSI, em seguida reconheceu a tape library.

  Fled ate o site da IBM e baixei ambos os drivers:

  IBMTape.x64_6209_3573_Tape_Library_Cert

  IBMTape.x64_6209_LTO2 - 5_3592_Tape_Drive_Cert

  Tento usar os drivers fornecidos, a continuum of band com '! ' no com o erro Windows Device Manager:

  Windows cannot initialize the device of this hardware driver. (Code 37)

  

  Alguem pode dar uma ajuda?

  Ve isso to resolve, pq ate then LSI logic SAS e recomendado quando você tem uma VM Windows 2008 only.

  http://communities.VMware.com/thread/212778

  If you have found this information useful, please consider awarding points to 'Correct' or 'Useful'*.

• tape library

  Hi all

  VM does support players band or tape library, if yes how can achieve us?

  Thank you

  Hello

  tape drives and the library are supported on ESX so are SCSI:

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1016407&sliceId=1&docTypeID=DT_KB_1_1&dialogID=123216192&StateID=0%200%20131201707

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1000024&sliceId=1&docTypeID=DT_KB_1_1&dialogID=123216192&StateID=0%200%20131201707

  In any case the fiber channel strips and the library usually works well.

  Hope this helps

  Best wishes / Saludos.
  Pablo

  Please consider awarding

  all useful or correct answer. Thank you!! -

  Por favor considered premiar

  any respuesta correcta o util. ¡¡MUCHAS gracias!

  Virtually noob blog

• With the help of a fiber tape library channel on a VM

  Hello world

  asked if it is possible to use a tape library of channel of fiber as a device to a virtual machine running on an esx 3.5 host that has SAN connectivity; I know that you can map a phisycal fibre channel adapter on a virtual machine, but this means that it can be used by the VM only, if I'm not mistaken.

  This is a new subject to me so I am curious about all the options that I have and all restrictions, as well as i can decide what is the best thing to do.

  Thanks in advance.

  Hello

  For ESX 3.x go to http://www.eweek.com/c/a/Virtualization/How-to-Attach-Local-Tape-Device-to-VMware-ESX-Host/

  With ESX 4, you can use PCI PASSTHROUGH option as well.

  Best regards, Edward L. Haletky VMware communities user moderator, VMware vExpert 2009
  "Now available on Rough Cuts: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: ESX security and virtual environment ' [url]
  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
  [url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url]

• can photos and opening to share a library?

  Can photos and opening to share a library?

  I want to share so I can use photos to back up the library in iCloud, but want to do all my work photo still open... is this possible?

  No, I cannot open to open a library of Photos.   It is only one-way: migrate an Aperture to photo library.

  Once the photos or Photos you can send them to your Aperture library to edit using the command share > add to open "", if you want o send to open for editing.

• Transfer iTunes and external HARD disk media library

  To build capacity on my 13-inch MacBook Pro (SSD) I want to transfer my music and files from the iTunes library on an external HARD drive. By following the online instructions I copied the iTunes folder of high level of my MBP on the external HARD drive and have chosen the new library (.itl) on the first reopening of iTunes. Everything seems fine but to verify music file information, it seems that the music files are always read in the MBP files. How do I order the new library to the remote disk copy of music files so that I can remove them safely from MBP. Thank you

  Move a library: quick response if you use preferences by default iTunes settings: copy the folder iTunes integer (and to ensure that all of its subfolders and files) intact at the other disk, hold down the option/Alt (shift on Windows) keys at the start of iTunes, and request select a library select iTunes Library.itl file in the copied folder. https://support.Apple.com/HT201596

• Old photos have not been deleted, even if it's been more than 2 months and keep crashing the photo library in icloud.

  Earlier this year, I used the library to icloud to back up my photos. Everything worked well. After awhile, I deleted the photos and off synchronization from photo library. Today, I decided that I wanted to use again, so I turned it on. It seems to work fine but when I connect to my PC I have the chance to see the old photos have not been removed. They seem to be corrupt (there is an exclamation mark instead of a thumbnail) and I can not open them, instead the library hangs. It has been more than 2 months, I suppose that even if I forgot to delete some photos, they should be gone now. Is there a way to fix this?

  a few things

  1 - iCloud Photo is not a backup - it's a synchronization service - see FAQ-apples iCloud Photo library FAQ - Apple Support

  More precisely

  Do I need a backup?

  ICloud library stores all of your photos and original videos in iCloud, but we still recommend that track you return of copies of your library. You can upload your photos and videos to iCloud on your computer and store them in a separate library, transfer them to another computer with transfer of images or Photosor store them on a separate disk.

  2 - ICPL can be accessed through Safari - connect to iCloud.com can click on the picture and see what's there - look in the recently deleted album and see what's there

  3. we need to know the details - you have other devices using the same iCloud account?

  LN

• How to combine several libraries in a library complete?  And this new global all0 library can be an external hard drive?

  How to combine several libraries in a library complete?  And this new global all0 library can be an external hard drive?

  1. click here for more information.

  2. Yes, if this disk contains a partition image or the drive Mac OS Extended format.

  (142356)

• ICloud automatically and periodically backup my documents, library iTunes and iPhoto library in the cloud?

  ICloud automatically and periodically backup my documents, library iTunes and iPhoto library in the cloud?  If so, how?  Do I need to do it manually, or is this automatic, like Mozy?

  You mention iPhoto, which means that you may have about the backup of a Mac. iCloud does not back up your Mac, you must use Time Machine (or other backup software) and an external hard drive.

• Make sure that wire you all the inputs and outputs of your node library function call?

  This document says "make sure that wire you all the inputs and outputs of your node library function call.

  http://digital.NI.com/public.nsf/WebSearch/7253D2F0D91F68058625752F005AB672?OpenDocument&submitted&&...

  But all the terminals on the right side of the call library node considered "outputs" referred to in the foregoing statement?

  This same document continues to show the right way to allocate memory with this illustration and in the illustration, the right "outputs" are left without junctions.

  

  Am I right in assuming that the only terminals that count as outputs, those who use the code of the DLL (modify) as output?  If it is true, then all other terminals output associated with the values entered alone so don't really account as outputs, correct?

  In the parameter call-library configuration screen there is a "Constant" check box and the help that he wrote "indicates whether the parameter is a constant."  What is this box? for me in the setup of the DLL call

  Finally, assuming that a call from the DLL that is supposed to write in these five outputs, is it legitimate to use constants like this to book a space of memory for the output values?

  

  How about if local variables associated with the output terminals are used instead?

  

  Despite the linked document, it is necessary to connect the corresponding entry for simple scalar output parameters (for example a digital). LabVIEW automatically allocate memory for them. If you do not want the entries for all the output wire anyway, there should not be no difference between a constant and a local variable; I would use a constant to avoid useless local variables.

  For settings that are only entries, there is not need to connect the outlet side. It's a bit simplistic since all parameters are entered only and get one result (other than the return value), you pass a memory address and modify the content to this address, but LabVIEW manages this dereferencing pointer for you. If you want to really get into the details, learn more about pointers in C.

  The "Constant" check box acts as the qualifier "const" on a c function parameter. It tells the compiler that the function you are calling will not change this setting. If you call a function prototype includes a const parameter, then you must mark this as a constant parameter when you configure the call library function node. Otherwise, I wouldn't worry on this subject.

• Dell TL4000 Tape Library on Cisco UCS 6120

  Hello

  We have Cisco UCS 5108 2 6120XP fabric of interconnection. We are running VMware on my Cisco blades. I have I need to connect my Dell TL 4000 LTO3 tape library this Cisco UCS so that I can configure a virtual machine with the EMC Networker software for backup of virtual machine data. When I connect the Cisco UCS library, it does not recoginize as tape drive.

  Please suggest how to set up the same.

  Thank you

  Amit,

  We do not support direct damage attach FC tape library to the FI currently.

  It may be a CF or CF storage end switch.

  . / Afonso

• After getting a username / password Adobe download Adobe Digital Editions 3.0 and borrowing from my public library and download e-books to my Kobo Glo, I received the following message: "this document is protected by Adobe digital rights management.

  After getting a username / password Adobe download Adobe Digital Editions 3.0 and borrowing from my public library and download e-books to my Kobo Glo, I received the following message: "this document is protected by Adobe Digital Rights Management (DRM) and is not currently authorized for use with your Adobe ID.  Please connect with the authorized Adobe ID and try again"

  [moved from the download, installation, commissioning to Adobe Digital Editions]