Quattro Pro 11 has stopped working

Similar Questions

• 4000 intellitype pro keyboard has stopped working

  I get an intellitype pro has stopped working when I start. Keyboards zoom and undo function has stopped working. I tried like a lot that I can but still nothing

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/838398

  It will be useful.

• HP Officejet Pro 8000 has stopped working on the upgrade to Snow Leopard (10.6)

  Since the upgrade, despite the HP and Apple claiming that the upgrade would take care of things like new drivers, my 8000 Officejet Pro has stopped working. Of course, this could be a coincidence and something else caused the problem.

  Quite simply, the printer button will Flash. The manuals indicate it means need new paper in the tray, or there is a jam. In addition, the print utility said 'in paper '. Of course, I have no jams, and there are 40 pages of paper in the one and only the plateau.

  I deleted the printer in "Print & Fax", turned it off, unplugged the USB and then added back, twice, everything to nothing doesn't. Nothing changes. Still unable to print.

  It doesn't seem to be anything I can try. This page, "Mac OS x: installation and use of the product in Mac OS X 10.6", simply going to say that I should remove the printer and add it, which of course I did. There are no other suggestions for what I could do.

  So either 10.6 broke my ability to print, or the printer is otherwise defective and must be returned under warranty. Any ideas?

  Thank you.

  Update...

  has gone through a series of emails with HP support, during which, with all due respect, I asked me to do what I had already tried. We got to the point where we were providing for the printer to be returned under warranty. Then yesterday morning, bam, the printer works again. No explanation and no idea.

  Best regards.

• Adobe Premiere Pro CS6 has stopped working

  Please, I need help. My software does not work for a few days. I tried to uninstall and install Adobe Premiere Pro CS6, windows and updates from nvidia, System Restore, resolve compatibility issues, nothing works

  The Windows message do not specify the problem. I can't open my files or adobe first

  My laptop:

  P55 - A Satellite Toshiba

  Intel Core i7-4700MQ CPU @ 2.40 GHz

  8 GB RAM

  8.1 Windows 64-bit x 64

  NVIDIA GeForce GT M 740 (version 362,00)

  I don't know what to do

  Hi Ingridt,

  Please see if there is an update available for video drivers:

  Drivers - Download NVIDIA drivers

  Check the logs of events from the Windows Event Viewer.

  Open event - Windows Help Viewer

  What are the information in event logs? (Event Viewer) - Windows help

  Thank you

  Ilyes Singh

• Transfer CS4 of Imac to Macbook Pro Indesign has stopped working

  I have Cs4 and recently upgraded to a Mac Book Pro but Indesign no longer works. I want to do a clean install, but do not have a dvd player. Can you provide me with access to a download of CS4 so I can reinstall the software. I assume that it was because the new Mac is on Maverick OS and international standards was not thanks

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

• Adobe first Pro CC has stopped working

  Hi guys

  Cs6 worked very well, I have recently updated subsequently CC and after uploading about 6 products, t Hey all work except PP.

  Event Viewer gives me this error.

  Name of the failing application: Adobe first Pro.exe, version: 7.0.0.342, time stamp: 0x5176598d

  The failed module name: amdocl64.dll, version: 10.0.1084.4, time stamp: 0x50d22720

  Exception code: 0xc0000005

  Offset: 0x0000000000062e07

  ID of the process failed: 0xa1c

  Start time of application vulnerabilities: 0x01ceaff731e4b0da

  The failing application path: C:\Program Files\Adobe\Adobe Premiere Pro CC\Adobe first Pro.exe

  Path of the failing module: C:\Windows\system32\amdocl64.dll

  Report ID: 71783af4-1bea-11e3-bdf2-00248ca76e09

  The thing I've tried...

  updated all drivers, chipset, vga and naoual on any other driver dated.  Ive uninstalled PP three times and re-installed.

  I have not tried a system reinstall but as I noticed a few other people have the same problem, but they seem to have solved their and I'm stuck

  My system is not new, but only a few years and manages very well CS6.

  Windows 7 64-bit premium

  ATI Radeon HD 4800

  I7 2.6gz

  6 GB of RAM

  Someone at - it still in the same boat as me, know Adobe there is a little problem?

  See you soon.

  Go to the device again Manager and put the graphics driver in VGA mode. You can do this by selecting "Browse my computer for driver software" and then select "Let me choose option" select standard VGA in the list, then go to 'Control panel Panel\All control Items\Programs and features' and uninstall AMD catalyst control center. Once this is done, go to the AMD Web site and choose detection automatic feature for detect you the GPU "http://support.amd.com/us/gpudownload/windows/Pages/auto_detect.aspx". When you have found the drivers updated, install and check if the problem is solved or not. You can also use this link to uninstall AMD catalyst "http://support.amd.com/us/gpudownload/windows/Pages/catalyst-uninstall-utility.aspx."

  Please restart the machine after all the steps and then start Premiere pro CC.

  Kind regards

  Vinay

• Adobe Premier Pro cc has stopped working

  I know this has been discussed before but its so far beyond my knowledge on how to solve this problem. I tried many of the suggestions without result.  I have a new Dell m6700, Windows 7 64 bit with Nvidia Quadro K3000m with the last driver, graphics Intel HD 4000 with the last pilot, i7-3740 @2.70, 8 GB of ram.  All the latest ideas as to why the CCloud PPro does not work?  Quite bad luck not being not able to launch the program.  I don't think I should be a computer technology to make this work. :-/

  PP works ok.  Went directly to the Intel web site and updated all their drivers from there and it works well.  I didn't know there was a difference between the update of the drivers via Device Manager and going to the site of the factory.

• Satellite Pro L40 - has stopped working and will not start

  Nothing happening, no spark of life, even if it is plugged to the mains. I have ALL of my info stored on it, including their e-mail addresses...

  (1) is it the battery?

  (2) it is likely that it might be corrected?

  (3) if irreparable, can data be transferred from a laptop dead to another PC or Mac Book of my partner?

  Thank you very much for taking the time to read and thanks I advance for any help, you can be so good as to provide...

  Toni

  Hello!

  Normally, if the boot of t computer doesn't and you can see anything on the screen it s a hardware malfunction, maybe the motherboard needs to be replaced.

  But in your case, I'll try this:
  Remove the AC adapter and the battery. Wait one hour, then reconnect the two devices. Try to start the laptop.

  If it doesn't work, you need to contact a service provider for help. They can check the laptop and determine the cause of this problem.

  And your data, you can easily without danger on the other computer. Just put the HARD drive in the external HARD drive enclosure. You can then connect the HARD drive to another laptop to backup data.
  But normally all data should be backed up already! ;)

• Intel pro /100ve has stopped working

  I did a system restore to a date before the problem occurred and still have the problem. Uninstalled Norton and all its components. Uninstall the NETWORK card and the restarted family Vista drivers added premium map NETWORK driver loaded, download and install the latest generic driver from Intel. no joy.

  Connected to the DSL modem via an old Netgear 10meg switch and now I am able to get online.

  Anyone have it please any ideas on how to resolve the situation? (Sux Skype at 10 M)

  Thank you.

  Intel(r) PRO/100 VE Network Connection *.

  ------------------------------------------------------------------------------

  * PCI * bus PCI 1 location, device 8, function 0

  * Identification device *.

  * Vendor ID * 32902

  * Device ID * 10204

  * Class device *.

  * Class code * 2

  * Under the class Code * 0

  * API * 0

  * PCI Config space fields *.

  * PCI Vendor ID * 0 x 8086

  * PCI device ID * 0x27DC

  * IDS revision * 0x01

  * API * 0x00

  * Void / register class * 0x00

  Class registry * 0x02

  * Vendor Id Registry Sub * 0x103C

  * Registry of subsystem Id * 0x2A5E

  * PCI interrupt line * 0 x 14

  * Interrupt Pin * 0 x 01

  * Windows Properties *.

  * Key Windows driver * {4d36e972-e325-11ce-bfc1-08002be10318} \0004

  * Manufacturer * Intel

  * Windows hardware ID * PCI VEN_8086 & DEV_27DC & SUBSYS_2A5E103C & REV_01, PCI VEN_8086 & DEV_27DC & SUBSYS_2A5E103C, PCI VEN_8086 & DEV_27DC & CC_020000, PCI VEN_8086 & DEV_27DC & CC_0200

  * Resources information *.

  * Resources o * I / O Port: 0xEE00h - 0xEE3Fh

  * Memory resources * memory: 0xFDEFE000h - 0xFDEFEFFFh

  * IRQ resources * interrupt: 20 (shareable) (level of triggers)

  * Driver information *.

  *Driver*c:\Windows\System32\drivers\e100b325.sys

  * Driver provider * Intel

  * Driver version * 8.0.47.0, 06/12/2007

  * Name of the peripheral system * \Device\ {06716FCC-CC85-4757-8535-0AF7693186EC}

  * Physical * unknown physical media

  * Connected adapter * true

  * Condition * available and able to send and receive data

  * MAC address * 00: 1B: fc:d1:c8:f6

  * IP address * 192.168.1.67

  * IP mask * 255.255.255.0

  * Adapter Index * 11

  * Gateway IP address * 192.168.1.254

  * DHCP server * 192.168.1.254

  * A DHCP Server * true

  * Have WINS * false

  * Adapter Type * ETHERNET

  * Adapter DHCP enabled * true

  * Adapter MTU * 1.46 Ko

  * Speed * 10.00Mbps

  Wednesday, May 22, 2013 10:37:56

  ------------------------------------------------------------------------------

  * Information model *.

  ------------------------------------------------------------------------------

  Model name * a6120n

  * Product number * GC670AA-ABA

  * Build software * 73NAv3PrA1

  * Serial number *[personal information]

  ------------------------------------------------------------------------------

  * Information system *.

  ------------------------------------------------------------------------------

  * Manufacturer * HP-Pavilion

  Total number of logical CPUS * 2

  Total physical memory * 2.00 GB

  Total number of optical drives * 1

  Total number of disks hard * 1

  Total number of video cards * 1

  Total number of Modules of memory * 2

  Total number of DIMM slots * 4

  ------------------------------------------------------------------------------

  * Motherboard *.

  ------------------------------------------------------------------------------

  * System Board * Chipset * Intel i945G/GS/P/PL

  * Southbridge * Intel 82801GH (ICH7DH)

  Board basis * manufacturer * ASUSTek Computer Inc.

  * Product * Leonite2

  * BIOS * seller * Phoenix Technologies, LTD

  * Release date * 27/07/2007

  * String of Version of the BIOS * 5.21

  * Size of ROM * 512,00 kB

  * Intel (R) Core (TM) 2 Duo CPU E4400 @ 2.00 GHz CPU:0 * Specification * Intel (R) Core (TM) 2 Duo CPU E4400 @ 2.00 GHz

  * Speed * 2.00 GHz

  * Size * 64,00 KB

  * Size * 2.00 MB

  * Intel (R) Core (TM) 2 Duo CPU E4400 @ 2.00 GHz CPU:1 * Specification * Intel (R) Core (TM) 2 Duo CPU E4400 @ 2.00 GHz

  * Speed * 2.00 GHz

  * Size * 64,00 KB

  * Size * 2.00 MB

  ------------------------------------------------------------------------------

  * Memory *.

  ------------------------------------------------------------------------------

  * System memory * total physical memory * 2.00 GB

  * Free physical memory * 1.03 GB

  * Page File * c:\pagefile.sys

  * Size of the Page file * 2.28 GB

  * 1024Mo (666 MHz) DDR2-SDRAM * memory size * 1.00 GB

  * Type of memory * DDR2-SDRAM (666 MHz)

  * Manufacturer of memory * Hyundai Electronics

  * Date of manufacture memory * week 41, year 2007

  * Memory part number * HYMP512U64CP8-Y5

  * 1024Mo (666 MHz) DDR2-SDRAM * memory size * 1.00 GB

  * Type of memory * DDR2-SDRAM (666 MHz)

  * Manufacturer of memory * Hyundai Electronics

  * Date of manufacture memory * week 41, year 2007

  * Memory part number * HYMP512U64CP8-Y5

  ------------------------------------------------------------------------------

  * Local disk *.

  ------------------------------------------------------------------------------

  * SAMSUNG HD320KJ * model number * SAMSUNG HD320KJ

  * Serial number *[personal information]

  * Firmware revision * CP100-10

  Total capacity * GB 298,09

  Buffer of size * 8.00 MB

  * Temperature * 27 c

  * Controller * Master

  *Driver*c:\windows\system32\drivers\disk.sys

  * Driver version * 6.0.6002.18005, 21/06/2006

  * HP - C: * drive letter * C

  * Name volume * HP

  * Volume serial number *[personal information]

  * File system * NTFS

  * Capacity volume * 289,26 GB

  * Free space on volume * 204,06 GB

  * Space used volume * GB 85.20

  * Recovery - D: * drive letter * D

  * Name volume * recovery

  * Volume serial number *[personal information]

  * File system * NTFS

  * Capacity volume * 8.83 GB

  * Free space on volume * 1.01 GB

  * Space used volume * 7.82 GB

  ------------------------------------------------------------------------------

  * CD-ROM Drive *.

  ------------------------------------------------------------------------------

  * CD/DVGW TSSTcorp TS-H653L * model number * TSSTcorpCD/DVGW-TS-H653L

  * Serial number * Firmware[personal information]

  * Firmware revision * 0514

  * Controller * slave

  * Drive letter * E

  * Readable * CD-ROM, CD - R, CD - RW, DVD-ROM, DVD-RAM, DVD-R, DVD - RW, DVD + R, DVD + RW, DVD + R DL

  * Writable support * CD - R, CD - RW, DVD-RAM, DVD-R, DVD - RW, DVD-R DL, DVD + R, DVD + RW, DVD + R DL

  Write strategies * TAO, SAO, RAW, RAW - MS

  *Driver*c:\windows\system32\drivers\cdrom.sys

  * Driver version * 6.0.6002.18005, 21/06/2006

  ------------------------------------------------------------------------------

  * Display *.

  ------------------------------------------------------------------------------

  * HP w1907 (wide LCD HP w1907 monitor) * Mode * 1440 x 900 (32 bit) (60 Hz)

  * Manufacturer * Hewlett Packard

  * Serial number *[personal information]

  Manufacturing Date * week 28, year 2007

  Type signal * Analog

  ------------------------------------------------------------------------------

  * Video card *.

  ------------------------------------------------------------------------------

  * Intel (R) 82945G Express Chipset Family * manufacturer * Intel Corporation

  * Video card chip Type * Intel (R) 82945G Express Chipset Family

  * Video card memory * 256,00 MB

  * Video card BIOS * Intel video BIOS

  *Driver*c:\windows\system32\drivers\igdkmd32.sys

  * Driver version * 7.14.10.1461, 25/03/2008

  ------------------------------------------------------------------------------

  * Device of Capture video *.

  ------------------------------------------------------------------------------

  * Live! Cam Video IM Pro (VFW) * Device driver file name * qcap.dll

  ------------------------------------------------------------------------------

  * Modem *.

  ------------------------------------------------------------------------------

  * PCI Soft Data Fax Modem with SmartCP * model * PCI Soft Data Fax Modem with SmartCP

  *Driver*c:\windows\system32\drivers\modem.sys

  * Driver version * 7.74.0.0, 06/05/2008

  ------------------------------------------------------------------------------

  * Sound card *.

  ------------------------------------------------------------------------------

  * Realtek High Definition Audio * manufacturer * Realtek

  *Driver*c:\windows\system32\drivers\rtkvhda.sys

  * Driver version * 6.0.1.5789, 11/02/2009

  ------------------------------------------------------------------------------

  * Network card *.

  ------------------------------------------------------------------------------

  * Intel(r) PRO/100 VE Network Connection * MAC address *[personal information]

  * IP address * 0.0.0.0

  * Gateway IP address * 192.168.1.254

  * Speed * 0 bps

  *Driver*c:\Windows\System32\drivers\e100b325.sys

  * Driver version * 8.0.47.0, 06/12/2007

  ------------------------------------------------------------------------------

  * Printers *.

  ------------------------------------------------------------------------------

  * Microsoft XPS Document Writer * model * Microsoft XPS Document Writer

  * Path * Microsoft XPS Document Writer

  * Driver Path*C:\Windows\system32\spool\DRIVERS\W32X86\3\mxdwdrv.dll

  * Driver version * 0.3.6002.18005

  * Microsoft Office Document Image Writer Driver * Model * Microsoft Office Document Image Writer Driver

  * Path * Microsoft Office Document Image Writer

  * Driver Path*C:\Windows\system32\spool\DRIVERS\W32X86\3\mdigraph.dll

  * Driver version * 0.3.8166.2

  * HP Photosmart D7300 series * model * HP Photosmart D7300 series

  * Path * HP Photosmart D7300 series

  * Driver path * C:\Windows\system32\spool\DRIVERS\W32X86\3\UNIDRV. DLL

  * Driver version * 0.3.6002.18005

  * HP Photosmart C4200 series * model * HP Photosmart C4200 series

  * Path * HP Photosmart C4200 series

  * Driver path * C:\Windows\system32\spool\DRIVERS\W32X86\3\UNIDRV. DLL

  * Driver version * 0.3.6002.18005

  * Default printer * true

  ------------------------------------------------------------------------------

  * Keyboard *.

  ------------------------------------------------------------------------------

  * Multimedia PS/2 keyboard optimized * manufacturer * HP

  *Driver*c:\windows\system32\drivers\i8042prt.sys

  * Driver version * 1.0.7.3, 07/02/2007

  ------------------------------------------------------------------------------

  * Pointing device *.

  ------------------------------------------------------------------------------

  * PS/2 Compatible mouse * manufacturer * Microsoft

  * Driver provider * Microsoft

  *Driver*c:\windows\system32\drivers\i8042prt.sys

  * Driver version * 6.0.6001.18000, 21/06/2006

  ------------------------------------------------------------------------------

  * USB controller *.

  ------------------------------------------------------------------------------

  * Intel (R) 82801G (ICH7 Family) USB Universal Host Controller - 27 c 8 * manufacturer * Intel

  *Driver*c:\windows\system32\drivers\usbuhci.sys

  * Driver version * 6.0.6002.18005, 21/06/2006

  * Intel (R) 82801G (ICH7 Family) USB Universal Host Controller - 27 c 9 * manufacturer * Intel

  *Driver*c:\windows\system32\drivers\usbuhci.sys

  * Driver version * 6.0.6002.18005, 21/06/2006

  * Intel (R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA * manufacturer * Intel

  *Driver*c:\windows\system32\drivers\usbuhci.sys

  * Driver version * 6.0.6002.18005, 21/06/2006

  * Intel (R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB * manufacturer * Intel

  *Driver*c:\windows\system32\drivers\usbuhci.sys

  * Driver version * 6.0.6002.18005, 21/06/2006

  * Intel (R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC * manufacturer * Intel

  *Driver*c:\windows\system32\drivers\usbehci.sys

  * Driver version * 6.0.6002.18005, 21/06/2006

  I have installed a NETWORK card in an open PCI slot, installed the drivers, and the problem is solved.

• Pro L10: After using a wireless mouse, the touch pad has stopped working

  Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. At the start of the keypad icon touch shows and the touchpad works intermittently, after a few minuets, the icon disappears and the touch pad stops working. In the control panel / mouse & or device drive I can how the program works, then disappears.

  I deleted the software and reinstalled nothing doesn't. In some cases, I get a message that a pointer is on.

  Can you help me?

  Hello

  It seems that the wireless mouse or mouse wireless drivers/software has a bad influence on the touchpad.
  I put t have a good solution for this problem. Well, you can consult the page of the Toshiba driver for latest driver updates. If the updates doesn't solve this problem I suggest to use either the mouse wireless and disable the touchpad with FN + F9 key combination or use a regular USB mouse.
  I guess that you are having regular problems with a USB mouse.

• Satellite Pro C660 - 16 X - Internet Exlporer has stopped working

  Hello

  Can someone help me here please?

  I have a Toshiba laptop Satellite Pro C660 - 16 X, and about 5 days of internet explore has stopped working completely. I am connected to a wireless system that works well since I am on now computer it works fine. I tried another web browser like Opera, but that does not work either.

  Can someone advise what I need to do to get access to the back of the internet?

  Thank you

  Have you tried to roll back OS to an earlier time using System Restore option?

  By the way: what do you mean with a stopped working?
  This means that some page cannot be opened, or you cannot start IE at all?
  Is there an error message?

  What is with opera? The opera starts it or not?
  How to understand this?
  If you ask something please, offer more information as possible and not a general statement. It can help us better understand.

• Satellite Pro A300 - 2C5 has stopped working

  Hello

  I have a problem with my Toshiba Pro A300 - 2C5.
  It stopped working today.

  I have paid a top tea but removed is as fast as possible but a little water got inside my laptop.
  He worked for a while, I turned off and it works again an hour later, but unfortunately it has stopped working.

  When I try to turn it on, the syptoms are as follows:
  -the only light that shines is a power indicator light
  -l' screen does not work at all (it stays black and went offshore)
  -fan works
  -It seems hard disk does not work if Windows does not start
  -the keyboard does not work, when I hit tke keys nothing happenes, I tested the Caps Lock key, but not flashing
  -computer does not read my camera memory card

  What shoul I do to get it working again? :(
  Any help appreciated.

  K.

  Hello

  The anomaly can be related to different laptop parts in the worst case the liquid spill damage the motherboard and you will need to replace the part.
  In the best cases, it could be a RAM error as it happens to one of my friends.
  He spilled coke on the keyboard and after awhile the laptop could not turn on.
  We checked memory sharp and replaced both modules with new RAM modules and this fixed the problem

  You can try this also maybe it helps if all other parts should be checked by a technician of the ASP.

• Satellite Pro U400 - TrueSuite Manager setup.exe has stopped working

  I have a Satellite Pro U400 running Vista Business (OEM) and at the start of a desktop computer TrueSuite Manager pop-up message appears telling me there is an update to install.

  When I try to install the update, I get a window that says Setup.exe does not work.

  Signature of the problem of the relationship an APPCRASH-is30C0.exe with the exception C0000005 code.

  I tried to uninstall the TrueSuite Manager through Windows uninstaller programs, but get the same message - setup.exe has stopped working.

  Appreciate advice on how to solve this problem.

  Hello

  I think that it is a simple case of corrupted registry entries and files that could belong to the TrueSuite Manager software.

  I agree with the previous user, and I recommend to reinstall this software again.
  You may need to clean the OS before installing the Truesuite again.
  In this case, I recommend the CCLenaer. It s a simple and free tool and can be downloaded on most Web sites.

  Google and you should find more information.

  See you soon
  Jayjay

• P50 win 10 Pro - footprints digital has stopped working

  Hi all

  I just got my P50 (20EQS00600, M1000M, i7-6700HQ, 16 GB of RAM, 512 GB SSD) about a week ago and I quite like it. However, there is one thing that drives me crazy: after that I upgraded to Win 7 Pro 64 bit for win 10 Pro, the fingerprint feature has stopped working. This issue seems to be related to those reported in these two threads for the P70, but at the same time appears sufficiently different to warrant a new post:

  https://forums.Lenovo.com/T5/ThinkPad-P-and-W-series-mobile/P70-fingerprint-software-issue/m-p/22517...

  https://forums.Lenovo.com/T5/ThinkPad-P-and-W-series-mobile/fingerprint-and-sound-problems-P70/TD-p/...

  So, here is what I did:

  (1) I correctly installed Win 10 w/o retaining data/settings from the previous installation of Windows 7; I even reformatted the SSD drive.

  (2) for the initial installation, was asked by Windows Hello register prints I've done.

  (3) fingerprint worked during the first connection, but then disappeared as if by magic. Hello Windows is no longer appears as a connection option in the control panel of Win.

  (4) I found in Device Manager the Synaptics WBDI reported the following problem: "this device cannot start. (Code 10) ".

  (5) repeated uninstall and reinstall drivers are without success. I tried both have Win a driver and manual to install the drivers I downloaded from Lenovo page.

  (6) when I uninstalled the drivers and then wiped the fingerprints stored in the BIOS, I was again able to register fingerprints with Windows Hello. However, this time the fingerprints were not yet registered in Windows, and I had to cancel the procedure. Immediately after, the Synaptics driver stopped working, cf. 4).

  I am at a loss what to do. Strange thing is that I ran Win 7 for about a week, and the fingerprint reader worked fine all the time. (Due to the scaling of the questions on my 4 k screen, I bit the bullet and went to win 10, in case you're wondering.)

  So everyone out there has the same problem, does anyone have a solution?

  Thank you in advance and the best,

  A

  
  

• Satellite Pro L20: Adapter WLan has stopped working and will not allow

  Hello

  I have a L20 Pro Satalite, which works very well. However, just before Christmas 2006, the adapter wireless (Atheros AR5005G) has stopped working.

  Windows XP Pro SP2 can see the adapter and network connections shows as being activated, but he sees not all networks.

  The Atheros Client Utility says that the adapter pases troubleshooting TI test diagnosis up to the Radio, when he says that the Radio is disabled and must be enabled in the Client utility.

  'Excellent!', I thought: opening the utility forward. Looked in the Action menu to find "turn on the Radio" is greyed out!

  Help!

  Any help is very welcome.

  See you soon,.

  Barry Smith.

  Is there a hardware option to enable and disable your wireless network card? (switch)
  You upgrade your Wlan driver recently? (If Yes, maybe with the wrong driver?)

  I had a similar problem once and resolved through driver updates... want to give it a try?

  You can download the driver generic Atheros (Version 5.0.0.107) available here:

  http://www.DD-WRT.com/DD-wrtv2/down.php?path=downloads/drivers/&download=Atheros5_0_0_107.zip

  Concerning

  chain