query
Hello friend..
Today, I program a VI, where I had created after the event
(1) to start the moter, the event CHANGE OF value created the button START
(2) second to stop the event CHANGE OF value of moter created STOP button
but I am facing a problem when the first event occurred while I was unable to stop the motor running inside the first test when running
so please tell me a solution or an idea?
thankss in advance... !
Hi friends
I've done a main vi in which I use a sub VI decision-making
now, how can I calculate the time required to run this void / vi? (where I don't use no loop)
It is possible by using the property node? and please tell me alternatives
thankss in advance... !!
Tags: NI Software
Similar Questions
-
If I check the servers of responder ocsp query I get the error message sec_error_ocsp_old_response. If I uncheck that box yahoo charge very well
Hello, can check you that your system clock is set to correct date, time, and time zone? -> time.is
-
When you type a query in the bar always double the third letter, for example, research, if I want to write a 'youtube' written "youutube" what to do, help
Hello chilli.willi, try Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).
If Firefox is open, you can restart Firefox Safe mode in the Help menu:
- Click the menu button
click Help
then select restart with disabled modules.
When the Firefox Safe Mode window appears, select "start mode safe."
If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.
When find you what is causing your problems, please let us know. This might help others with the same problem.
- Click the menu button
-
How can I get a query in the search field to open in a new tab or a new window, and the current window?
If you are looking through the search bar in the Navigation toolbar, this preference can be changed to research it open in a tab.
Type of topic: config in the address bar and press ENTER. Then answer "I'll be careful." Type this pref in the search at the top.
Browser.Search.openintab = double click to switch to true
-
I had trouble due, apparently, to a file named popuptransparent [dot] xul, which I have 3 cases on my computer (Win XP/Firefox last v.). Using my window of AVG home page, I get "popuptransparent" (try to fix) and the results appear OK. But then when I click to a new tab, on the "transparent popup" link in the query "did you mean: transparent popup", NO RESULTS appear in this new tab. In addition, when I reload then the Panel of AVG which sought to 'popuptransparent' in the first place, it, too, shows now no results. Or a panel shows Google now no results. They show the quantity of results, but just white screens for the results themselves.
Links https://support.mozilla.org/en-US/questions/948804?esab=a & as = aaq and https://support.mozilla.org/en-US/questions/952141?esab=a & as = aaq brings me. I re-installed Firefox v. 20.0.1 nothing works. How to fix?
Should I remove it from my computer all 3 of these instances of xul [dot]?
Regarding the problem of searching, you can check the extension "Disconnect"? I think it could affect the Google sites and third parties who use Google. You can disable or try its button Options here:
Firefox orange (or the Tools menu) button > addons > Extensions category
While you're there, you can disable all extensions essential and unrecognized. When in doubt, turn off.
After restarting Firefox, did you notice a difference?
Could you explain in more detail the next part?
Should I remove it from my computer all 3 of these instances of xul [dot]?
Is this something that came in a security sweep? What question do you think they are originally? They are located in a folder extensions?
-
I need to stop a download of the query, that I thought a stand-alone application but turns require a higher level (FCPX) as a 'parent' and I do not have that, or I want to buy it.
Motion IS a stand-alone application. It is mainly designed to make effects for Final Cut Pro X, but it is not necessary to have with FCPX nor is it necessary to have FCPX to create projects for other purposes. When you open the query, simply select project of work outside the FCPX motion. You can save regular projects of Motion anywhere on your system.
-
How to activate the query suggestions
How the query suggestions can be enabled in the Firefox address bar?
You're welcome... good to know you got it working.
-
Satellite A30: Can not find the COM ports when trying to query the modem
Hello.
I have satellite A30 and I reinstall windows xp at home, but I can't find any com port whenever I try to query the modem the display hardware confilct, but in Device Manager no sign of error/confilct, I did everything what I can.
Add the port,
Add more then 1 port
disable the printer port
change the printer port
Reinstall derver modem,
In short, I've done everything I can. its always show (! yellow) mark.if I add the port and if I remove the port and there is no sign of error.
If someone help me to solve this problem a little,
regared.
MGK.Post edited by: mghouskhan
The modem uses a virtual com port. It s not a real port.
I wonder why it usually happens after the installation of the new operating system, you must install drivers Toshiba together in the right order
Installing the chipset utility is importantThe modem driver should do the work and you n t need to activate com ports
Please choose the right side of the page of the Toshiba driver modem driver after installing the OS correctly. I think that's the key -
When you search on a page by using the function FIND of Firefox, it ignores the query on the results page if it is in a link. Example: using Google, Yahoo, Bing, etc, I search for "airplane" (without the quotes). On the results page, I am looking for aircraft. The Firefox FIND function ignores the word "aircraft" if it's in a link. He finds it if it is plain text. I used the safe mode, deleted the cache - not good. Updated 3 addons in need. Check the list of embarrassing addons - none of my friends are on it. I have reset to the default values - no good. Then I copied localstore.rdf and prefs.js to a different location and renamed those in the profile. When I restarted Firefox the problem disappeared, but then where my addons (that's all I noticed;) I've always had my favorites). Then I changed the 2 files their original name. My favorites were back but was the problem. With the help of 3.6.17
No problem here as long as I can see the text to highlight all find them also all occurrences.
Make sure that sensitive has not activated (Ctrl + F or Edition > Search)
-
Motion 5.0.7 memory 8 GB, processor 2.93 GHz intel Core i7, ATI Radeon HD 5750 1024 MB graphics
Bezier masks do not appear in the timeline, preventing me from editing. The masks appear in the column of layers only. The problem just started yesterday. The query projects previously do not seem to be performed.
In the upper right corner of the canvas, there is a view menu. Check if the 'lines' are checked in the section view overlays.
-
My safari has locked up with a request for verification of the property query. What can be done to fix this?
This is the shit that came.
Force Quit Safari (cmd-option-esc) then restart Safari by holding down the SHIFT key.
Sorry, wrong forum... question thought it was an OS X. In any case don't give them any info.
-
383 receving error while querying the data search
Hello
We have a script (vbs) that runs in Diadem and asks a Datafinder (Server edition). After the addition of a code of error handling, we encountered the following error:
Error description: an error occurred while searching. The query can contain at least one invalid property. Number: 383 Source: false.*
* Now, according to the message above, we can extract that there is a property or a value of the property (of the application) makes / hurt, but see the next line from this message please.
Once we took the trap for this error, we connect and save queries (in files TDQ) which were used at the present time that the error occurred. When load us the files of this query, no error is caused. We currently have to solve this problem, but we don't find the root cause yet. No guidance, the tip or help will be greatly appreciated.
Hi manny,.
This looks like a problem of type of property data for me. In rare cases save a condition of tiara in a *.tdq file can cause this condition to change the data type of the property. You can try to reduce the number of assignments to one and determine what state is the culprit? Then ask yourself which operator you use in this condition - if it is "=" or "<>" then it supports any type of data. If it's any other condition, then he could run against a string data type. In addition, you may have a datetime property that is not optimized in the DataFinder, who could be considered an invalid property.
Brad Turpin
Tiara Product Support Engineer
National Instruments
-
"Estincomplet" DataFinder Advanced Query result is equal to true after 200 files
I have a VBS that runs a query that has been used for a while, but has reached its limits this week. Limit is reached is to 200 files, after the "estincomplet" flag is set and do not know how to increase the setting of the maximum value. I tried the "MaxNoSearchResults" setting, but not had any luck. I have attached the VBS a subset, I've been using, any input would be appreciated.
Thank you
Potentially
Navigator.Display.CurrDataFinder.ResultsList.Settings.MaxCount = 1000
is what you are looking for.
-
How to query a Subvi dynamically loaded to its input terminals names?
Hello
I have an application where I use dynamically load the Subvi and I need a way to query the Subvi for its names of input terminals. I'll use several different Subvi now and in the future and will not experience the terminals.
Any help would be greatly appreciated.
Thank you in advance!
-
Newport ESP300 GPIB communication stops after query
Hello
I'm trying to control a Newport ESP300 via GPIB controller with labview and I encountered a problem that I saw in the forums. I can tell the controller to move to different positions, to wait, to change speeds, etc., without error. However, when I ask the device, it stops all communications with Labview.
Example of
1 MB //axis 1 on
1pa2 //move axis 1 absolute in position 2
wait for stop 1WS
1AP? absolute position of query
2 response //ESP300
1pa3 //NOTHING ARRIVES
1MF NOTHING HAPPENS
GPIB READ.vi a mode = 2 (to end the LF character) to terminate the operation of reading as specified by newport, but the communication stops everytime I interrogate the device.
I tried to do what this last newport mentions, without effect. FTP://download.Newport.com/MotionControl/archive/motion%20Controllers/ESP300/software/ESP300%20GPIB%...
I should mention that I couldn't disable autopolling (the box is grayed out). Although I don't think that's the problem. I also tried to replace the GPIB READ.vi with code on VISAS, but this has no effect.
Sending of the same series of commands through NOR-MAX does not show this strange behavior. I tried to ask about it in Newport, but they were not able to help. Anyone has any advice on how to reliably read/write by GPIB with the ESP300 controller?
Thank you.
I found the problem. It turns out that when you use the GPIB READ.vi, I had put the number of bytes to a value that was too small. Thus, reading finished early, leaving the rest of the message in the buffer. I don't know exactly why it resulted in a 'freeze' of communications, but he did. Increase the number of bytes to 255 has solved the problem.
-
Increase the maximum number of query results
Hello
I need to increase the maximum search results, when I'm looking for data with data-> ValueMaxCount
I'd like to 2000
I tried tho change it with the help of the property page and the example given.
The result looks like this:
Define DataFinder = Navigator.ConnectDataFinder (Navigator.Display.CurrDataFinder.Name)
Set IndexedFileProperties = DataFinder.GetIndexedProperties (eSearchFile)
Set IndexedProperty = IndexedFileProperties ("fileName")
Define ValueList = IndexedProperty.GetValueList
DataFinder.ValueMaxCount = 2000
Define ValueList = IndexedProperty.GetValueListBut the quantity of serach result remains at 200
I am referring to the wrong object or do I need to increase it to a certain point?
Concerning
Janick
Hi Janick,
your script increases the number of values that are returned if you ask for all values that are indexed to a specific property (in the BROWSER QueryForm you will receive this list by clicking the... button to the right of the line a condition).
To increase the maximum number of search results, you would use the MaxCount property for the elements of results.
DataFinder.Results.MaxCount = 2000' in the search without the GUI
or
Navigator.Display.CurrDataFinder.ResultsList.Elements.MaxCount ' in the search with the BROWSER GUI
What version of DIAdem do you use? 2015 tiara, it is also possible to determine the maximum number of search results in the search method:
DataFinder.SearchElements (Query, 2000)
I hope this helps.
Good day
Eva
Maybe you are looking for
-
HP laptop I think: password administrator or power on password
I got a laptop HP from a friend for down payment for rent. But when I turned it on I got a message saying enter password administrator or power on password. No matter what I have try finally returns to the disabled system 77695412
-
The person calling said he could give me a technical support for problems that they had detected with my computer, but he seemed surprised when I said that I had problems with my computer. I did not understand a lot of what he was saying because of
-
"The parameter is incorrect" Error Message is displayed on the computer
I'm running Windows 7 Home Pro on an Asus laptop and recently decided to add my old printer USB, HP Oficejet v40, to our network via a print server, LPR Networking USB wireless home. The Installer seems to fill correctly, and my printer appears in th
-
Hi all Wrv210 router supports "Proxy IGMP"? ".
-
Check if the bounding box is another setting of
Using the PDETextIsAtRect function, I discovered that if returns items that do not part of the bounding box. So I wanted to know if I have two bounding boxes, is it possible to check if the an element bounding box is located in the bx covering someth