Question about Delete Collection

Similar Questions

• Question about the collection of NETWORK adapters for vMotion / VM vSwitch

  Hello

  We use vSphere Enterprise Edition 5.1.

  We also create separate vSwitch for management / vMotion and VM.

  Each vSwitch receives 2 network cards connected to the different switch for redundancy.

  We would like to know is necessary to provide the collection of NETWORK adapters for these vSwitches?  Currently, only enable us NIC Teaming for VM vSwitch only.

  Thank you

  VSwitch vMotion, we have 2 assigned NIC (nic2 and nic6) with 10 VLANS.  NIC2 and nic6 are connected to 2 different physical switches.

  Should I choose

  (1) both are active

  (2) both are assets + grouping of NETWORK cards?

  Question - if there is only 1 VLAN, it seems that NIC Teaming is also not very useful unless we use 2 VLAN (Multi-NIC vMotion).  Is this right?

  If you use Multi-NIC vMotion, there is no need to have two different VLANS, all you need is depending on configuration

  on your vMotion switch, please create two vmkernel port for vMotion with the same VLAN ID, but the grouping of NETWORK cards as below

  vMotion_1 - VLAN ID: 10

  Grouping of NETWORK cards

  vmnic2 - active

  vmnic6 - watch

  vMotion_2 - VLAN ID: 10

  vmnic6 - active

  vmnic2 - watch

• Question about the collection of NETWORK adapters / collage

  When installing ESXi, I want to use all 4 GigE ports on my server and I put a static IP address for each NIC.  Once the server is in place, I bind two NICs.  What I want to know is, it is best to remove the IP address for the second NETWORK card in our DNS?  For example, after you install ESXI, our DNS has the following:

  esxi1.mycompany.local 10.10.0.111

  esxi1.mycompany.local 10.10.0.112

  Should I delete the 10.10.0.112 entry if the servile pair use 10.10.0.111?  I think that I should so that there is no misdirection, but I'm not sure.

  Any suggestion would be appreciated.

  So phyical NIC have IP addresses assigned to ESXi.  You say ESXi which physical network cards must be plugged into the virtual switch and you assign an IP to the network management agent who is also trendy that same virtual switch, but never you assign IP addresses to physical network interface cards.  The sole purpose of a phyical in an ESXi installation nic is so they can connect to the virtual switches that you create within your ESXi installation.  Then it's the other virtual machines and VMKernel ports that have their own IP address.  Take this picture below, that I found on the internet for example.  These (vmnic0 and vmnic1) physical network interface cards have not all ip addresses, there is no record of A DNS pointing to those, etc..  They are there to connect physical switches on your virtual switches (they are network devices; it is the clearest way to think about).  The gray bar below is a virtual switch and the green dots on the virtual switch are ports where something is plugged.  These virtual machines (Linux, Windows, whatever), that's what has ipaddresses.  The special devices plugged into the virtual switch are called Service Console and VMKernel Ports (in ESXi 4.x, they are all just called VMKernel Ports).  These have IP addresses and these are the closest things to what you describe in your message.

  If you get the chart however, you will notice that the virtual switch "obligations" say these two NICs phy, together based on how it to bind to them.  Unless you want to do a lot of research, or you have an exceptional case complex parameters for pasting of these two NICs (in the tab "NIC Teaming") should probably be "Route based on the original virtual port code" and "link status only.  Lighthouse of probing should be used in cases when the status link only mode does not work (usually he does it very well).  Moreover I also put the two cards as 'Active' network and say yes to "Warn switch" and "rescue".

• Question about CF9 collections

  Hello, everyone.

  Small question.  In CF9 Server Admin, if I use the Admin to create a collection, is there a way for someone else to see details for this collection (that is to say, this one or several folders, file types, etc.)?

  I haven't found how to do this.  We have a collection, but it was created if long that no one remembers that directory (ies) or what extensions it's indexing of files.  We have to rebuild.

  Thank you

  ^_^

  You can make an enhancement request: https://bugbase.adobe.com/index.cfm?event=home.

  Even if it is possible via the Admin API, it should be achievable through , too.

  --

  Adam

• Question about deleting and adding a node

  We currently have a 2 RAC in 10.2.0.4 Standard Edition node. The current configuration of the two nodes
  

  Processor: IBM X 3650 Intel Xeon
  Clock-Speed: 3.16 GHZ     
  OS: Solaris 5.10     
  RAM: 16Gb
  Architecture: x86     64     
  Shared Storage: 1TB  SAN(146*9)

  We intend to replace (DELETE and add) one of the above mentioned nodes with a node HP Proliant. Here are the details of the new node

  HP ProLiant DL380 G7 
  
  Processor: Intel Xeon
  Number of Processors : 2
  Clock-Speed: 3.46 GHz
  RAM : 24GB
  OS: Solaris 5.10 (09/10)

  Do you foresee problems with this?

  Hello

  Check this box on MOS.

  * RAC: Frequently asked Questions [220970.1 ID] *.

  Can I have different servers in my Oracle RAC? Can be from different vendors? Can be different sizes?

  https://support.Oracle.com/CSP/main/article?cmd=show&type=not&DOCTYPE=FAQ&ID=220970.1#A15457

  Kind regards
  Levi Pereira

• Question about BULK COLLECT

  If I have something like what follows (pseudocode)
  

  SELECT MYOBJECT (one, two, three)
  BULK COLLECT INTO MYTABLE
  FROM Table1
  WHERE Table1.Select = 1;

  Can I make a second BULK COLLECT and add to the existing data in the Table, or if it replaces the data?
  
  something like
  

  SELECT MYOBJECT (one, two, three)
  BULK COLLECT INTO MYTABLE
  FROM Table1
  WHERE Table1.Select = 1;
  
  SELECT MYOBJECT (one, two, three)
  BULK COLLECT INTO MYTABLE
  FROM Table1
  WHERE Table1.Select = 2;

  I know the above could be done in a single BULK COLLECT, but I am curious about the concept. I tried to have a look on the web but cannot find anything...
  
  Kind regards
  Toby

  the collection will be replaced by the last BULK COLLECT

• Question about deleting data from the HARD drive

  Hello

  The C drive on my computer satellite phone is almost full, 1.21 Gb free of 55.7 and drive E has 10.9 GB 36 GB free. How can I solve this problem. I am not concerned by what is deleted. It can go if you have to.

  Slowing down the laptop down to something serious.

  Any help would be great.

  Hello

  It seems that drive E has little more free space
  So, you can move some files like photos, movies, files pm3 or any that you have stored on the partition, the partition E.

  You can also reduce the E partition and can add free space on the C partition.
  To do this, you must use a 3rd party software
  I recommend using a freeware tool called * Gparted.*

  How to get it? Google is your friend ;)

• Question about deleting partition 'Recovery '...

  Thanks to all who read this post.

  What I want to ask that it is on the deletion of "Recovery" partition and merge it with the system. I was thinking of doing this tonight:

  1. - create the recovery on three DVD-L single discs layers HP brand DVD.

  2. - I hope that I will be able to enter certain partition management application and with this OS 'Merge' partition disks and a recovery in one big partition.

  3 - reinstall completely default OS and software in this one big partition.

  4 - be happy using every inch of space from my hard drive.

  Well now that I was dreaming and that is why I came here my friends HP colleagues to ask you, if I do the foregoing, things will be good? I mean I'm missing something?

  Please advice me, someone must have tried that before...

  Thank you!

  After your set, recovery disk use the procedure HERE to delete the partition. However_if you use recovery reinstall the value will just re-create the recovery partition and reinstall Windows, forcing them to repeat the deletion process.

• Question about the collection

  I'm in bulk data collection in an associative array called v_tb_bw_lg_mstr twice. However, both the last index value is the same.

  DECLARE
    TYPE typ_tb_bw_lg_mstr IS TABLE OF tb_bw_lg_mstr%ROWTYPE INDEX BY BINARY_INTEGER;
    v_tb_bw_lg_mstr typ_tb_bw_lg_mstr;
    v_sql VARCHAR2(64);
  BEGIN
       
    SELECT * BULK COLLECT
    INTO v_tb_bw_lg_mstr
    FROM tb_bw_lg_mstr;
    
    Dbms_output.put_line('Output 1:'||v_tb_bw_lg_mstr.LAST);
    
    SELECT * BULK COLLECT
    INTO v_tb_bw_lg_mstr
    FROM tb_bw_lg_mstr;
    
    Dbms_output.put_line('Output 2:'||v_tb_bw_lg_mstr.LAST);
  
  EXCEPTION
    WHEN OTHERS THEN
    ROLLBACK;
    Dbms_output.put_line(SQLERRM);
  END;
  /

  Output 1:2430
  Output 2:2430

  Because the second SELECT is not an addition to an existing collection, it just overwrites it.

  To get what you want, this could be the most effective way:

    SELECT * BULK COLLECT
    INTO v_tb_bw_lg_mstr
    FROM tb_bw_lg_mstr
    UNION ALL
    SELECT *
    FROM tb_bw_lg_mstr;
  

• Questions about the collection of personalization data.

  I am currently working on a form which is presented as an xml file using a submit button by email.  There are several things that I wonder if you can customize and if so, how?

  1. Is it possible to have the calculated time field that is included in the exported data?
  2. IF SO... Is it possible to change the date/time calculated field to calculate when the e-mail button is clicked rather than when the form is started?
  3. Is it possible to have the file by e-mail named something other than * name * _data?  Maybe something that includes the date, or another domain specified for point more precisely what form it is?
  4. Finally, is it possible when you import data to import xml data into an Excel file which already has other data collected in it?

  Responses to the foregoing would be greatly appreciated!

  Thank you!

  Kayla

  Hey Kayla,

  Yes, most of it is possible.

  1: select the date/time field and go to object > tab. Liaison depending on the version of LC designer you have, you want the drop-down list of data binding to have 'Normal' or 'using the name '. This means that the value is exported to the XML file. If the drop-down list says "No data binding" or "None", the value will not be exported.

  2: the date/time field probably has the script initialization or docReady. That's fine, the date and time will be filled when the form is opened. In order to refresh the time at the time wherever the user submits the form, you must include the following line in the mouseDown event of the submit button.

  DateTimeField1.execEvent("initialize"); 
  

  This will trigger the DateTime field Initialize event and update the date / time just before submitting the form.

  3: it's tricker, the name of the XML file is set automatically to reflect the name of the file of the form. You can write the script to change the name of the file of form (and by extension the name of the XML file), however, this requires a function of trust in a separate javascript file. This JS file will have to be on all computers which would be used to access the form and to be honest not worth the (significant).

  4: adobe do a good job, if you are distributing your form via Acrobat.com. Additionally, Acrobat version 9 allows you to select the individual xml files and export them to an Excel spreadsheet (under the menu options). You can also compile returned forms by selecting the answer file and the individual xml files. I don't think that you will be able to export a new XML responses in an existing worksheet. Using Excel, you may be able to import the new XML into the existing file. If all else fails, I export the new xml to spreadsheet files, this open in Excel and copy the data back. Open the existing worksheet, and then copy the data back at the end of the table.

  Hope that helps,

  Niall

• Question about deleting podcasts from a single device

  I use the same Apple ID for all my devices, but I only listen to podcasts on my iPhone and podcasts take up a lot of space on my iPad. Is it possible to unsubscribe or remove my iPad podcasts without unsubscribe or remove them from my iPhone?

  Hi jbennettrv,

  Thank you for using communities Support from Apple.

  If you want to unsubscribe to a podcast on a specific device, you must make sure and turn off the option to sync Podcasts in your podcast settings:

  To stop synchronization of podcasts on your iPhone, iPad or iPod touch:

  1. Tap Settings > Podcasts.
  2. Under Podcast settings, turn off sync Podcasts.
     

  On the application of Podcasts

  Take care.

• Question [about deleting an account]

  How can I remove the user account from creative cloud?

  Cancel see answer #1 in https://forums.adobe.com/thread/2023066 - includes a link to Chat from Monday to Friday

• Question about deleting of the LDAP user and integration

  In the Document "Management Console Help", he States:
  
  "You can't invite accounts of users that are mastered in a user directory LDAP; These accounts are created automatically when you synchronize the LDAP directory. »
  
  This means that after you configure an LDAP domain, the users specified by the filter should be automatically attracted to OnTrack? I don't see the ldap users during execution of an empty search for the administration console. At this point, I can also connect to the OnTrack using a valid LDAP user. I was trying to see if OnTrack worked similar to the Complutense University of MADRID, where the OnTrack user account would create once the user logs in the application.
  
  What I can do, is go to "Create a user" and enter a valid ldap user's email address. then I see this user in the full search. This user can also connect successfully.
  
  I wanted to know what was the expected behavior: it should be a 'register' required ldap users in ontrack before auth in the app? Is there a synchronization process that must be executed to pull in the ldap users?
  
  Also, is it current best practices of removing users? I see in the administration console there is a note that says: "Note: removing users is not supported."
  
  As always, thanks for the info!
  
  
  Thank you
  -ryan
  
  Ryan Sullivan | ECMconsultant
  http://www.ecmconsultant.NET/
  

• Questions about apex_web_service.make_request and collections

  Hello
  
  I began using with Apex Web services, and I have a few questions about the apex_web_service.make_request procedure. You can pass a name of the collection as a parameter. I'm a little confused on this parameter from the collection...
  
  This is perhaps a silly question, but the documentation is not very clear, so... This procedure always inserts just a line in the collection (with the XML returned by the web service call), or are there cases where several lines will be inserted?
  
  If there is still only a single row, what are the practical reasons to use a collection for her? I ask because in most cases interest you about the columns/rows to display in a form or a report in the Apex and I don't see the advantage to store in a collection of single-row, but I may be missing something...
  
  If the response contains several rows of data, it will be automatically extract the lines and insert them into the different lines of the collection? (posts...)
  
  What is the best approach then to extract several rows returned in the XML response and insert them into a collection? Currently I use XMLTABLE in a loop and call apex_collection.add_member for each row returned. is there a better way to do it?
  
  Thank you
  Luis

  Luis,

  the webservice returns only one row in the results collection.

  XMLTABLE using is a good idea, instead of using a loop, you can also use APEX_COLLECTION. CREATE_COLLECTION_FROM_QUERY or CREATE_COLLECTION_FROM_QUERY_B (B for bulk which may mean 'fast').

  brgds,
  Peter

  -----
  Blog: http://www.oracle-and-apex.com
  ApexLib: http://apexlib.oracleapex.info
  BuilderPlugin: http://builderplugin.oracleapex.info
  Work: http://www.click-click.at

• Question about partitions on Equium A100-027

  Hi all!

  I'm new to the forum but have been hidden for a while and he thought at the time that I said "Hello".

  This and the fact that I have a question about my laptop Satellite A100-027.
  The hard drive on my laptop seems to be divided into three partitions = Vista (c) / data (E :) / WinRE (d) with the WinRE (D :) is quite small but others, quite large.))

  My C drive is up to 3 that GB free with about 35 GB of free data (E :) is possible to merge these two to give me a big drive? And if so, how?
  Please excuse my ignorance, but it seems impossible to me to "get my head around" this thing hard drive and would split the a large hard drive.

  Any help would be greatly appreciated and once again, Hello to all.

  Hello

  As the user previous already said, you can manage HARD drive partitions in disk management settings.

  If you n t want to have a data partition (e) then you can try to delete it in disk management.
  Then you can add this empty space of the HARD drive for other partitions on the HARD drive.

  But note; the empty space will be placed at the end of the HARD drive. I don't know if your C partition is placed as a second HARD drive partition, but if so, then it should be no problem to add empty space to partition C (System) of m.

  Concerning