Question about iPhone 6s with charge time

Similar Questions

• I read this topic (I have a lot of questions about Xperia Z2 with lollipop)

  Hello world. I read this topic (I have a lot of questions about Xperia Z2 with lollipop) and I have posted a question, but it seems that no one saw him. That means the following: (how can I install the source application unknown to other users in my phone because it is to the unknown source menu is disabled in the settings-> Security)? This means that I can not install all the apps if I switch to the lollipop? Can someone tell me please the exact meaning of this?

  Thank you.

  It's true, but game store will not need this option checked - loading of a file manager will - but which is not say that the application will work once installed

• How I replace perfectly my record excel sheet with ability of database? + General questions about computing distributed with LabVIEW

  Surprisingly, I'm almost finished with a full blown control-simulation application, that I've been working on for more than a year now, thanks in no small part of this community. The final step is to run on the simulations of k ~ 8 and be able to meet a simulation and overall statistics on performance. Each simulation is taking about 6 minutes of real time to run (~ 2 seconds of real time per hour of simulation time, valid for 7 days of simulation), as we seek to about 800 hours of your time to simulate. I have 5 computers available and a raspberry 2 Pi these simulations on, I'm looking to set up a kind of compute cluster at the end in about 2 weeks.

  The ability of current logging is sketchy; I got about 40 columns of data, and they are written in a spreadsheet with a .xls format tabs-delimited. This works very well for individual simulations, but it would be quite heavy to deal with if I had more than 20,000 of them. I think this must be done with a relational database sort, but my experience with databases is very limited, especially then, when it comes to LabVIEW. Here are my questions:

  -Can I create a kind of master-slave configuration where a computer (and probably the Pi) keeps track of the simulations are complete, which are running, and who have never run? Computers slaves ask for simulation settings, and IP would give them to him.

  -How should I take care of the database? Each simulation is about 500 k in .xls format, it's about 5 GB of data in all. Computers slaves synchronization from time to time to take care of the redundancy?

  -How can I refine my memory + General fresh disk I/O? How can I know which items from my point of view most of them?

  -Do you have suggestions for the implementation of clusters of databases relational/computer with LabVIEW?

  I have attached a picture of my configuration of logging + the overall structure of the application. It is a state machine with a structure of the event for the interruptions.

  
  

• A question about external authentication with PHP OCI8 using a portfolio store

  Hello
  

  SQL> SELECT * FROM v$version;
  
  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE     11.2.0.1.0     Production
  TNS for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production
  
  SQL> 

  OS: Linux Fedora Core 17 (x86_64)
  PHP Version: 5.4.14
  Apache version (httpd): Apache/2.2.23 (Fedora) 

  I have a question about OCI8 connection to the Oracle server via portfolio, which I understand is a good practice because we do not have to hard code the users password. I'm trying to read pages 117 and 118 of the book The Underground PHP and Oracle manual online to learn how to set up a portfolio. I proceeded by steps as explained in these two pages (except that at the end I connect, as a normal user, not a privileged user) yet, apparently PHP does not detect the user.
  
  Here's what I write in my script
  

  $connection = 
                  oci_connect 
                      (
                          "training", 
                          "", 
                          "php_ora_usr", 
                          "AL32UTF8"
                      );

  the training is the name of the user that I use in my PHP scripts to connect to the oracle database and the password is mypassword (is not true, just for the purpose of this thread :)) the code above gives me the following error:)

  Warning: oci_connect(): ORA-01005: null password given; logon denied in /var/www/html/myscript.php on line 91
  
  Fatal error: Connection step: ORA-01005: null password given; logon denied in /var/www/html/myscript.php on line 13

  But if I also provide the password which is,

  $connection = 
                  oci_connect 
                      (
                          "training", 
                          "mypassword", 
                          "php_ora_usr", 
                          "AL32UTF8"
                      );

  Obviously it works, but at the same time, this means that my wallet is not operational.
  
  So I'll write here, step by step, how I did according to the instructions contained in the pages 117 and 118 of the above mentioned book and I would be grateful if you could kindly tell where I made the mistake (s)
  
  The following text was performed under my oracle linux (so the dbagroup)
  
  Step 01:_
  I created and provided the password for the directory of portfolio

  mkstore -wrl /home/oracle/wallet_dir -create

  Step 02:_
  I created an entry for my oracle user that will be used in my PHP scripts to connect to oracle
  user: training
  password: mypassword

  mkstore -wrl "/home/oracle/wallet_dir" -createCredential php_ora_usr training mypassword

  I also checked that the entry was actually created for my user in the portfolio

  $ mkstore -wrl "/home/oracle/wallet_dir" -listCredential
  Oracle Secret Store Tool : Version 11.2.0.1.0 - Production
  Copyright (c) 2004, 2009, Oracle and/or its affiliates. All rights reserved.
  
  Enter wallet password:                
     
  List credential (index: connect_string username)
  1: php_ora_usr training
  $ 

  Step 03:_
  I added the following to my $TNS_ADMIN/tnsnames.ora

  .  .  .
  php_ora_usr = 
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = db02)
      )
    )
  .  .  .

  Step 04_
  I added the following to my $TNS_ADMIN/sqlnet.ora

  # sqlnet.ora Network Configuration File: /u01/app/oracle/product/11.2.0/db_1/network/admin/sqlnet.ora
  # Generated by Oracle configuration tools.
  
  NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
  
  ADR_BASE = /u01/app/oracle
  
  WALLET_LOCATION =
      (SOURCE =
          (METHOD = FILE)
          (METHOD_DATA =
              (DIRECTORY = /home/oracle/wallet_dir)
          )
      )
  SQLNET.WALLET_OVERRIDE = TRUE
  SSL_CLIENT_AUTHENTICATION = FALSE
  SSL_VERSION = 0

  _ Step 05
  The TNS_ADMIN environment variable is already set correctly in * / etc/sysconfig/httpd * so I didn't need to do something for this step
  
  
  Step 06_
  I gave to access Apache (as root) in the directory of portfolio (in fact, it seems that the user oracle (dba) of linux also has the required privileges to grant this access to the apache)

  # setfacl -m u:apache:rx /home/oracle/wallet_dir
  # setfacl -m u:apache:r /home/oracle/wallet_dir/{cwallet.sso,ewallet.p12}

  Step 07_
  Restart Apache

  # service httpd restart

  Step 08_
  Finally make a test connection using the connection string php_ora_usr which the entry was created earlier. And the test was not successful, as indicated above

  $connection = 
                  oci_connect 
                      (
                          "training", 
                          "", 
                          "php_ora_usr", 
                          "AL32UTF8"
                      );

  The error message:
  

  Warning: oci_connect(): ORA-01005: null password given; logon denied in /var/www/html/myscript.php on line 91
  
  Fatal error: Connection step: ORA-01005: null password given; logon denied in /var/www/html/myscript.php on line 13

  I would appreciate it if you could kindly shed some light.
  
  Thanks in advance,
  Dariyoosh

  That gives a good clue to begin with. With your platform/Apache/DB, you might need different ACLs. Test directory and permissions. Check what euid your Apache runs as. Good luck.

• Question about OWA scripts - how much time do need to run or not at all

  Just a question about OWA on Exchange 2010 scripts. I have a site and unique Exchange Server. I noticed that we have a powershell script scheduled in the Task Scheduler running daily that defines all the mailbox OWA strategy. This policy is defined in the EMC access client/organizational Configuration (EMC) tab.

  My question is... If the policy is already configured in the access client/organizational Configuration tab, should this powershell script run at all?  Not all new users get this strategy by default (since we have only one policy OWA) If you enable Outlook Web access on the mailbox of the user in the appearance of the mailbox tab?  My thought is that the powershell script and the calendar was just a postponement of the old Exchange 2003 for strategies for the OWA...

  Thank you.

  Hello

  Your question is beyond the scope of this community.

  I suggest that repost you your Question in Exchange for TechNet Forums.

  https://social.technet.Microsoft.com/forums/Office/en-us/home?category=ExchangeServer

  Or here:

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?Forum=exchangesvrgeneral

  See you soon.

• Question about streaming video with FMS3 live

  Thanks much for you efforts...
  I tested an exciting tutorial about streaming video with Flash Media Server 3.5 live...
  every thing went good and I could see my webcam broadcast from my computer via my web site, but unfortunately I see no any other machine

  I use Microsoft windows XP SP2
  and flash media live encoder 3
  but my UNIX web server
  is this a problem?
  Please send me your comments if its possible
  Thank you very much

  Replace localhost with the public ip address of the computer running FMS then paste the SWF on the Web server and mean it... will work, provided you rtmp string points to the computer running FMS

• Something about iPhone interfering with data

  I went to Europe about 2 months ago and used different sim cards while there. Since returning my data almost never works, except very rarely and randomly at 1 x. My (Verizon) cellular network works, as I can call and send texts, but it is only the data that will not work. I deleted all the apps that I downloaded abroad.

  Here's the weird part: when I reset my iPhone completely and erase all content, data works. As soon as I save the data stops working. If there is something on my phone which is somehow interfering with the ability to use the data. I tried to use repair backup to decipher, but even "repaired" backup will not make the data available for use. Any thoughts on what could be causing this interference or what I can do? I have photos, contacts, notes and settings of the Agenda that I don't want to lose.

  Thank you!

  Hello

  Try following the steps outlined here:

  If you cannot connect to a cellular network or cellular data - Apple Support

• Questions about Satellite P200D battery charging

  Hi all
  I bought my satellite in March 2008, and after some initial problems with the result having replaced, I have finally been sorted and have had very few problems since. However, in recent days, this is all changed. My battery is now practically refusing to load and run not power off. At the moment its operation off power supply and load, but for the past hour its been hurtling battery.

  What going on it when I plug in the AC adapter, the light making goes blue and seeing power begins blue and flashing orange (constantly between the two colors) and the battery light flashes orange. The HARD drive light is also blue.

  I don't know if the problem is the battery or another problem with the power actually do to the computer. The fact that it fits as being plugged in all time leads me to believe that the power adapter is not the issue, while its battery not wanting to take new service charges, or another issue with the laptop not properly in the face of the power to be.

  Someone at - it ideas? I scoured google and have not been able to find anything on this problem. I bought the laptop through Curry, but I don't want to pay a pound and a half a minute to talk to The Tech Guys, when they most likely wasting time asking me if I rebooted it.

  Looks like there could be a hardware problem. Take it to an ASP for warranty repair.

• Question about iPhone 5 c to iOS 9.2 update

  A friend has an iPhone 5 c running iOS 7.1.2 and the phone has 32 GB of storage space.  She tried to upgrade to iOS 9.2 for several days now without any success.  At first, she thought it was a matter of space and she has managed to release about 7 GB of space.  At this point, it's what's happening:

  • It connects iPhone to her computer laptop (Windows 8.1) via a USB cable
  • She starts the update of iOS on iTunes
  • Finally, iTunes displays this message: "preparing the iPhone for the software updates...". "and iTunes will also display a message stating:"iTunes is updating the software on the iPhone.
  • It leaves the computer and only iPhone and iTunes displays the messages above for more than 24 hours.

  The fact that it leaves on literally from one day to the next and the update is not complete so upset she and I.  At one point, she accidentally disconnected the iPhone from his computer and iTunes has detected the disconnection, but when she immediately reconnected, he eventually returned to the condition described above.

  It is the fact that this update takes long time revealing a problem or should it just be patient and wait that it ended?   In addition, she used the iPhone to call during execution of the upgrade.  This would have an impact on the upgrade?

  Thank you in advance for your help!

  Tom

  Your friend has tried a live update?

• Question about backup hot with Tablespace with no logging

  Hi, we have an application that using a temporary tables (tables of work). The application maintains a persistent connection to the DB.
  During the loading of data, the application will create work tables and then remove it when the process is complete. This recommended by Oracle on this application is to create a tablespace separated with no record.
  
  Here's the recommendation:
  "To minimize the contention of disk and logging, you can create a tablespace with NoLogging for the.
  work tables and indexes and store data files for storage on a physical disk separate.
  Because work tables are created and dropped during the processing of data, creating a tablespace
  without connect to work tables and the indexes of the working table can improve performance. »
  
  I asked experts to demand that all agree to implement the above suggestion. However, our DBA is reluctant to implement the suggestion above that there are concerns about the validity of the hot backup. Here is his comment:
  "The problem is that we cannot guarantee the recovery of this database unless recover us from a cold backup. This means that if there is something on this database which is important, we will have problems with data protection. "He said, not to apply any log will affect the ability to recover the database in the event of failure, even if tables work East of temporary tables only. His opinion is that, when the backup occur at the same time when the table is created, will result not valid backup. The only way to save the database must publish a cold backup, which means that we must stop the application to make the backup.
  
  Is it true. What is the best backup strategy for the above case?
  From the expert point of view of the application, cold backup is not necessary that the application does not maintain a persistent connection to the database.
  
  Thank you.

  If it's a temporary table only that is kept in storage space, in any case the data on their part would go, either at the end of the transaction or at the end of the session. Not sure that the data your dba trying to protect? I have yet to have my first cup of coffee then maybe missing me something obvious here, but I don't see a point in the protection of temporary tables and "cold backup to use for their recovery.

  HTH
  Aman...

• Question about X 220 with 3 x 3 antennae

  I ordered a Thinkpad X 220 with the option of 3 x 3 antennae (no cam). The question is, why in the Device Manager, I see 1 x 1 in wireless adapters?

  Do I need a better wireless card than the default provided with the X 220?

  Thank you

  OK, the default map cannot use the 3 antennas. Map of 1 x 1 is invalid, it cannot do the 150mbps Wireless N-Lite, not even 300 and certainly not the 450mbps which can make a 3 x 3 card.

• Simple question about immediate execution with cursor

  Hi all

  I have a slider that retrieves the username from dba_users. My question is how can I execute this statement (SELECT DBMS_METADATA. GET_GRANTED_DDL ('ROLE_GRANT', USERNAME) FROM DBA_USERS; ) with my cursor.  Thank you.

  DECLARE

  uname varchar2 (30);

  CURSOR c1 IS

  SELECT username from dba_users;

  BEGIN

  OPEN c1;

  LOOP

  FETCH c1 INTO uname;

  RUN IMMEDIATELY "SELECT DBMS_METADATA. GET_GRANTED_DDL ('ROLE_GRANT', uname) FROM DBA_USERS; PROBLEM HERE

  Dbms_output.put_line (uname);

  OUTPUT WHEN c1% NOTFOUND;

  END LOOP;

  CLOSE c1;

  END;

  /

  DECLARE

  uname varchar2 (30);

  CURSOR c1 IS

  SELECT username from dba_users;

  BEGIN

  OPEN c1;

  LOOP

  FETCH c1 INTO uname;

  OUTPUT WHEN c1% NOTFOUND;

  RUN IMMEDIATELY "SELECT DBMS_METADATA. GET_GRANTED_DDL ("ROLE_GRANT", "' | uname |) ') FROM DUAL';

  Dbms_output.put_line (uname);

  END LOOP;

  CLOSE c1;

  END;

  /

  But why do you need dynamic SQL statements? And why do you need PL/SQL at all? All your code is nothing but:

  SELECT user name,

  DBMS_METADATA. GET_GRANTED_DDL ('ROLE_GRANT', username)

  OF DBA_ROLE_PRIVS.

  DBA_USERS

  WHERE username = grantee

  /

  SY

• Questions about the work in real-time

  Hello.  Just a few questions on usage in real time, in fact on the swf file.

  First of all, I want to create something of a drag and drop interface.  Is it possible to have a stage act as two separate steps?  I mean, is it possible to have the left side of my step hold all the components, they are moved to the right side of the scene and placed anywhere, the user can then click on save, and only the right side of the scene is saved?

  Secondly, I'm testing a few things.  What I would do to get a type of free transform on an image on the stage in real time, in the swf file?  So once the movie is played, the user can resize any image then how they like by dragging a corner of the image...

  Cheers for any advice.

  You can use 2 container (Sprite or MovieClip) objects one on left on the right.  All display list container objects have their own scene

  jou can so easily the steps as much as you want each independently controlled placed anywhere you want.

• Question about pre-ordered Album, (first time)

  For my birthday my sister gave me a $ 25 Itunes gift card and I went and pre-ordered the new Album of Metallica Deluxe, (The Set 3 disc) and I confirmed my purchases of 14.99 and my question is,.

  Has paid for the entire album in full, or each track when you click on the pre-ordered button? I am responsible for the 1.29 for the first single and again here second single, (two songs)

  Will need me even more money or the 14.99 will always cover the entire album?

  Will need me even more money or the 14.99 will always cover the entire album?

  14.99 + tax will cover it.

  When you pre-order, you pay for the titles as they become available and then pay the balance when the full album is available.  In the end, you have the complete album for the price of the correct album.

• Yet another question about the update with the shutters tab

  I am quite new to this, but I've been scouring the boards and try many different things, and I decided to ask for advice.

  There are other threads similar to my problem such as:

  http://supportforums.BlackBerry.com/T5/Java-development/SetFocus-issue-with-tabbed-screen-page/m-p/6...

  http://supportforums.BlackBerry.com/T5/Java-development/how-to-delete-a-Manager-or-a-field-that-is-c...

  I have a set up tabbed pane based on the example and everything works fine until I have delete a line from a VerticalFieldManager. It is by default the focus on the first item on the screen, and I get this. My problem is trying to substitute or replacement behavior.

  My screen implements the FocusChangeListener for the buttons on the tab (custom LabelFields).

  I tried many different variations - I tried to manage the update completely manual and ended with a bit of a mess. I tried to capture the event navigationUnclick() and coding of the focusChanged() method to manually switch the update, but it seems that the focusChanged() method is called before the focusChanged(), which doesn't help me.

  As I said I am pretty new to this so I could do something very stupid, but I don't really understand the focus handling implementation. A kick in the right direction would be appreciated.

  Thank you.

  You can have a NullField in your managers before all other areas - in this way, even if you delete the rest, the NullField might keep the focus.

  If this does not help, try the substitution of sublayout for your managers, call super.sublayout and then explicitly setFocus to your NullField (the deletion of any field causes a display Manager to rearrange).