Question about white space

Similar Questions

• Questions about LUN space Reclaimation

  Greetings!

  I have a few questions for you guys.  I studied how the restoration of the deleted blocks occurs on a given data store.  Although I get orders to do so (")vmkfstools -y" in 5.0/5.1 and "esxcli storage vmfs unmap" in 5.5), I need clarification on what is actually happening.

  


  1. If the datastore is 600GB and shows 100GB free in vSphere, is the full 600GB shown as allocated on the SAN?

  2. We are running vSphere 5.1.  If I run "vmkfstools -y 50" to reclaim 50% of free space, what happens to the SAN?


  3. Does the reclamation only affect deleted blocks, or does it affect all free space?

  


  That's all I can think of for now.  Thanks!

  


  Dave S


  1. If the datastore is 600GB and shows 100GB free in vSphere, is the full 600GB shown as allocated on the SAN?

  It depends, for example, if in some time you used 550GB on the data store and remove 50 GB, maybe it will be 550GB allocated on the SAN, recovery space is performed automatically.

  2. We are running vSphere 5.1.  If I run "vmkfstools -y 50" to reclaim 50% of free space, what happens to the SAN?

  Taking the example of 100 GB of free space on the data store, if you use vmkfstools y 50, the command will create a file of balloon that is 50% of 100 GB in size (50 GB) and once the file is created, it will be removed to zero space and free up space on the SAN.

  


  3. Does the reclamation only affect deleted blocks, or does it affect all free space?

  Not 100% sure, but I think it depends on how much space you want to recover, if there is for example 100 GB of free on the store database and 50 GB of free on the SAN and you use vmkfstools y 70, ball file fills not only the 50% of the deleted blocks but over 20% of the blocks already set to zero... but of course after completion of the order you will get 70% of free space :-)

• Question about free space on the HDD of the Satellite L150

  I am very disappointed to see that the 250 GB on my Satellite L150 is actually only 109GB because of the partitioned drive.
  I don't remember seeing this on any of the spec in my research.

  I have about 100 GB of image files and the data I wanted to transfer and I do not know what to do.
  I keep all my files image on an external hard drive?

  Would not be a large amount of data on the PC it considerably slow down?
  Or not? Or do I have to keep some of them on the C:\ drive?

  Can another possibility - I get an extra HD for this machine?

  Trenny

  Hello Trenny

  When you open Windows Explorer and click on my computer, which is shown on the right side?
  You have two partitions?

  Sorry, but all the history is confusing. By default (factory settings) the HARD disk has two partitions:
  -C for OS
  -D is free and can be used to save all your data

  If you can use both partitions or not?

  If so please use it. It will not slow down your PC. The performance depends on the performance of the operations, background processes and of RAM available, not on the amount of data stored on the HARD drive.

• Question of extra white space

  Hi, I am currently building a website in Adobe Muse and really enjoy it.  I met some differences between what I designed and that the site actually looks like and have been able to find solutions to all but one.  The home page has a header and footer, and a cutting-edge Animation Adobe.  However, it was apearing of extra space under the animation (above the page footer). Everything looks fine in design mode, but even in the preview, there is more space.  I tried uploading to our ftp, thinking that perhaps the question (as in the preview mode does not display the animation), but the extra space is still there.  I tried to move social media icons, thinking that they might be at the origin of it.  I looked to see if there may be a blank form or text box that is the origin of the discrepancy, but I can't find anything.  Any suggestions?

  Here is the screenshot of the design mode:

  

  Here is the screenshot of this in the browser:

  

  Any help would be greatly appreciated.

  Hi Razorcs,

  I checked your file and the white space from page that you call in the iframe. I have seen that most browsers do not respond well, when the width and height of the iframe is specified in percent.

  As a solution, give width and height of the iframe manual and that should take care of it.

  For example, try something like 412px, which is the height of the dashboard content

  

  Kind regards

  Abhishek Maurya

• I need the URL for the default home page so I can put it in my homepage protection, because all I get when I open the browser's "about"white."

  I'm going to hell to get just the URL for the browser/Firefox start page. I just did a recovery image factory and all I get after downloading and installing the Firefox browser a tab that says 'about white." I don't get the URL in the address bar so that I can put this URL in my homepage of protection (I use Advanced System Care ultimate). Once I get this URL and place it in the area of protection of homepage of my security software, I'll be ready to go, because I want to use Firefox as my default browser. I searched the frequently asked questions and asked the question in every way that I know, in English, and there seems to be no one there who can tell me just the URL of the start page. While I do not understand why it is so hard to get, I certainly need and would be grateful for a solution to this problem.

  It is actually called Subject: Home , but the only way to know would be if you were viewing the page and called to the top of the Page Info dialog... who, for future reference you can get using one of these methods:

  • Right click on a box empty page and select View Page Info
  • (menu bar) Tools > Page Info
  • Click on the globe or padlock icon in the address bar > more information

• Question about temperature internal Satellite A300 ND1

  Hello

  I have a question about the temperature of the standards it of ok for my laptop and what is the normal temperature and how can I keep it low?

  Thank you.

  Hello

  It's not easy to say what a normal temperature could be.
  The temperature is not always the same and it depends on the use of the laptop.
  Usually, the temperature would increase while gaming or running applications high performance. Why? Because all devices such as the CPU and GPU would focus the heat dissipation and this leads to a higher temperature.

  > How can I keep it low
  Very simply, you can keep still low level, but you can make sure there is enough free space around the laptop to ensure good air circulation.
  Also don t use the laptop on your knees etc in order do not obstruct cooling fans.

  It s also advised to clean the fans from time to time using the jet of compressed air. These sprays are really useful and could buy in the stores of different computers.

• Question about partitions on Equium A100-027

  Hi all!

  I'm new to the forum but have been hidden for a while and he thought at the time that I said "Hello".

  This and the fact that I have a question about my laptop Satellite A100-027.
  The hard drive on my laptop seems to be divided into three partitions = Vista (c) / data (E :) / WinRE (d) with the WinRE (D :) is quite small but others, quite large.))

  My C drive is up to 3 that GB free with about 35 GB of free data (E :) is possible to merge these two to give me a big drive? And if so, how?
  Please excuse my ignorance, but it seems impossible to me to "get my head around" this thing hard drive and would split the a large hard drive.

  Any help would be greatly appreciated and once again, Hello to all.

  Hello

  As the user previous already said, you can manage HARD drive partitions in disk management settings.

  If you n t want to have a data partition (e) then you can try to delete it in disk management.
  Then you can add this empty space of the HARD drive for other partitions on the HARD drive.

  But note; the empty space will be placed at the end of the HARD drive. I don't know if your C partition is placed as a second HARD drive partition, but if so, then it should be no problem to add empty space to partition C (System) of m.

  Concerning

• Question about lights LED R7000

  Question about this quote from the Manual: "when the router is turned on, the light during approximately 10 seconds and then turn. If all lights lit, this indicates a fault in the router"my router lights LED is turned off. Are they supposed to? I discovered how manually to disable using genius. NETGEAR Nighthawk AC1900 is defective?

  I think the manual means just that at first they all turn on, then off for a few seconds. LED lights depending on what services are available.

  The power light should stay lit. Port LAN LED come on if a device is connected the WiFi LED (Amber on white, 100 M, 1000 m), are we if the radios are turned on. The Wan or the internet LED lights up if there is a connection to the internet. Some of them you can turn off via the user interface, but it is handy to have on so that you know the status.

  It looks like your router working normally.

• Question about the size of the hard drive for the 11s Yoga

  Hello

  I have a question about my 11 s Yoga that I bought recently.

  It is advertised as having 128 GB SSD, but according to the PC of the information there are 101 on the C drive and 3.99 GB on the D drive. This only adds to 104,99 GB. Is someone can you please tell me where are the remaining 23 GB?

  Just to clarify, Go 104.99 is no space AVAILABLE, it's total capacity. The available space is only 67GB, which is not much at all I installed practically anything outside of a few documents.

  Thank you

  Empty your trash.

• Question about the charging light on the venue Pro 11 (5130)

  I'm curious... read these discussions in recent weeks... found this work with the Tablet for about 2.5 hours after... I was up to 75% of battery. Connect the tablet to install a software... noticed 75%, not charging. Stop... removed the battery and put it back... He then read 75%, in charge. OK... so what's fixed now... a question about the manual of the system. Said that when the battery is charging, a white light is supposed to be on... where? When that I start, I see a momentary white light at the top of the screen, by the front camera... but when it is plugged and the loading and off... white light no.... No a - I misread? Thank you

  Light (color is white when the load) is located next to the power switch (top, right). Mine re-load very fast.

  White light goes off (or does not) when the Tablet is fully charged (the light on the charger is always on when it is plugged into the outlet)...

• Keep the white space with SAX parser?

  Is it possible to create a SAX parser that will result in white space and end forming part of the content of the element? SAX of RIM parser removes beginning and white space, even for documents that do not have DTD or schema. ("The Analyzer provides the same character data for")

  ABC

  "as for.

  ABC

  ".)  He also apparently adjusts white space even when it is represented as a character entity (for example, & #32 or when the element has XML: Space = "preserve" attribute.) All of these behaviors are contrary w3 care about XML processing. Normally, I just call setPreserveWhitespace (true), but unfortunately, implementation of the SAXParser RIM does not include this method.

  I don't know if it might help, but if your SAXparser class extends DefaultHandler, is a manager of ignorableWhitespace methods... I have not used, but just to let you know. Hope this helps

• BrowserField2: a white space appears when scrolling

  There is a strange scrolling with height html problem in the browserFileld2.
  I asked the html content.  and after you download html when I view the HTML

  and scroll to the top and then Ahmed for the bottom and scroll back to the top.

  There is a strange white space that covers half the screen.

  Please see the attached attached off screen

  

  Look like browserField2 not 120 Hz content when scrolling. How to solve the problem? Help, please.

  BlackBerry OS: 5.0

  Problem has been resolved.

  Sorry the question was realted to zoom, zoom rather than scroll

  When the user presses DOUBLE_TAP or Double click to zoom in, zoom back the contents of the browser field and if the user is in middile of browserField rather than at the top. white space will automatically appear below the content.

  I solved the problem by substituting the screen method touchEvent (TouchEvent)

  and if the user is not on the top then by verticalScroll zero adjustment.

  If (te.getGesture () .getEvent () == TouchGesture.DOUBLE_TAP) {}

  If (_bf2.getManager ()! = null & _bf2.getManager () .getVerticalScroll () > 0)

  {
  _bf2.getManager () .setVerticalScroll (0);
  }

  }

• General questions about errors in eventvwr

  Greetings.

  I have a general question about some failed modules are stored in the Windows Event Viewer.

  An error leading to the crashes some applications that I've seen several times now when supporting computer problems is something like this:
  (Windows error reporting) Fault bucket, Type 0, name of the event: PCA2, (...) P1: application.exe, (...)

  I wonder what this 'PCA2. Which is a kind of module Windows handles tasks such as allocating memory or smth. Like this? What could be the cause of these errors (physical memory problems / corrupt swap file / insufficient rights?)

  Same Question for the application falls down because of "kernelbase.dll" as in:
  (Application error) Failing application: application.exe, Version: 0.0.0.0, (...) Failed module: KERNELBASE.dll, Version: 6.1.7601.18015, (...) Path of the failing module: C:\Windows\syswow64\KERNELBASE.dll (...)

  What is the .dll file and what could possibly cause kernelbase.dll Fault?

  The application can be a bit buggy, but I wonder what could possibly cause these accidents and if there is a way to fix these problems - or what dev did wrong.

  The two errors occur mainly on x 64 systems - especially Windows 7/vista

  Kind regards

  With application errors, the application is called everything first and the module he collaborated with is named second. Normally you should try to reinstall the application if you see not to repeat the mistakes. If this does not work, you go to the forum on the application to see if other users see the same error. There may be a bug in the application.

  The observer of the Application event log contains Information reports (event ID: 1001) for errors where the details were sent to Microsoft for review. You will find that there are corresponding to the event ID: 1000 reports errors, either in the system or Application logs. These reports are also included in the center of the Action. Center type action in the area of research above the Start button and press ENTER. Click on the arrow pointing downwards to the right of Maintenance, and then click view reliability history. The errors reported are the Red orbs with a white cross. You can search for solutions to problems, but occasionally you get a significant response from Microsoft.

  I can't tell you what it means PCA2. Google did not find a significant result. The reports themselves are not unintelligible, although I have never tried to understand the meaning of a particular report. I have extracted what, in my view, is a starting point of two reports:
  Event name: PCA2 = P1: motherboard_utility_onoffchargesetup.exe P2: 4.65.0.0

  Event name: PCA2 = P1: setup.exe P2: 11.0.0.28844

  You have the app in the boredom and the version of the file. These details have been extracted a file of information system to a computer with a card mother Gigabyte. So, you see I have a starting point, if I wanted to determine the cause of a failure.

  I will say before you go dive deep into each event ID: 1001 report that many are not easy to even begin to understand. However, they can provide useful clues.

  KERNELBASE.dll is likely to be the module with which the application works. You need to focus on the application.  KERNELBASE is probably preceded by P3 or P4 in the report?

  General remarks on the event viewer:
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• The question about the interconnections of fabric UCS 6300 Series

  Hello

  I have a question about UCS 6300 Series fabric interconnects. Is this fabric UCS interconnections 6300 series integrated into the extension of tissue function?  The reason why I asked this question was, when there is 6300 series fabric has been plugged UCS 5100 chassis, there is no more space to plug in extension of UCS 2200 series fabric. My understanding on the topology of the UCS, tissue extender is the connection between the blade and the fabric of the interconnections.

  Thank you

  Bob

  Hi Bob

  Yes, that's correct!

  The chassis so called FI - IOM (see attachment p52); THE IOM = FEX.

  I/O of the blade adapter to connect inside basket chassis, which connects to the built-in IOM.

  IOM is then connected to the built-in FI.

• White space under the foot during the fluid browser width

  Hi everyone, thank you in advance for reading my question and for taking the time to answer.

  I'm trying to create my first site sensitive and spin a weird question when I simulate the width of the browser...

  

  When I reduce my width of simulated browser on the master page, he stuffs my footer bar upward.  However, when I go to master page preview in the browser, it works fine and pushes the footer below the content.

  

  I'm trying to create breakpoints fluid in the page master because all subsequent pages will be based on the same standard layout.

  Hello Nick,

  I have reviewed your .muse file and found no problem with it.

  The white space you get when resizing the wheel of breakpoint in the Muse is just an expected behavior, if get you an overview of the site in the browser that everything will look fine.

  The conclusion therefore is Muse you will have to drag the footer items down manually. and adjust accordingly to other breakpoints.

  Alternatively, simply increase the height of the master page, if you want to place more content in there.

  Thank you

  Ankush