Question ASDM 7.1 (1)

Similar Questions

• Cannot start device - ASDM question Manager

  Hello

  I have recently updated our router to spare ASA 5510 to version 9.1 (3) with image ASDM Version 7.1 (5) 100.

  The customer I try to run the ASDM launcher on Windows 7 x 64 is the latest version of Java (updated 7-5).

  I am able to do at the hand of the screen when I have https to the device.  I can install the ASDM launcher, but as soon as I get the host name and the password I have the following error "could not launch 192.168.X.XXX Device Manager."

  I went through a checklist and I can confirm the following:

  -3des-sha1 license is activated

  -Http server is enabled for my customer subnet

  -ssl encryption is enabled

  -Tried Firefox and IE10

  When I try to run the ASDM via the browser I go as far as to ask for the password, and although the initial prompt seems to accept it, an another authentication box will appear asking you to do this over and over again in an infinite loop.

  I have lived through many forum posts and checklists, but I can't seem to identify this problem.

  If it helps, the box was already flashed back to factory default before I then applied the configuration from scratch (depending on the configuration of our live cam ASA 5510).

  Can anyone help please?

  Thank you

  Hi Anthony,.

  Since then, you must have more control on ASA:

  AAA authentication http LOCAL console

  Alongside this, there should be a user name and password in the local data base of the SAA. Then try to configure command, then check:

  username cisco password cisco

  After this attempt to access two cisco ASDM with username and password and check if it works or not.

  -Prateek Verma

• How to change the ASA and ASDM on ASA5505 questioned once

  Can anyone suggest the way to upgrade the software on the Cisco ASA5505 simultaneously both ASA and ASDM without trouble, like I just did?

  Here is what happened.  I copied the files asa821 - k8.bin and asdm - 621.bin for flash memory, then renamed the old versions like Oasa724 - k8.bin and Oasdm - 524.bin and then issued the command reload from the GUI of Windows.

  Big mistake, I lost connectivity ASDM entirely and has been obliged to buy a USB to serial port adapter and plug the cable from port of CLI command so she can return to the unit.  I found that he was running the kernel asa821 - k8.bin, as expected, but apparently the ASDM was still under the version 5.24.

  Should I have created a new folder and moved the older versions of this file, then issued the command reload system and hope for the best?

  I feel that I've defiled things upwards, I guess I have to use tftp to reload the boot image to get the ASA5505 back up again (using the ROMMON commands)

  In fact, the only way that I was able to recover the GUI of Windows used start to asa724 image - k8.bin older command.

  What is the right way to upgrade to new versions asa 8.2 (1) and asdm 6.2 (1)?

  Really, I don't want to risk losing my ability to speak with this box and I spent an anxious afternoon yesterday, when I got to the pop-up message box "can not display the asdm manager."

  ======

  After working with the CLI port, I noticed the following error:

  Set of images of Manager devices, but unable to find disk0: / asdm - 524.bin
  Out of config line 75, "asdm image disk0: / asdm-5...» »

  So apparently some configuration file must point to the correct asdm and just blindly change the files in the folder will NOT work.

  ========

  After working more with the port of the CLI and the GUI of Windows port, I found that the 'asdm image' command did NOT work in the CLI software, but was apparently working in the GUI software, so I ran this command to tell the system to use the recent 6.21 on start.

  After that and issuing the command reload of the CLI, I was able to set up successfully with the latest software of asa and asdm.

  I would like to have access to CLI is valuable in this case.

  I DON'T know why the command 'asdm image' appears inaccessible on the CLI port.

  Any ideas?

  As far as I'm concerned this problem has been resolved (using educated error)

  The boot of the ASA when he tries to use the command 'system startup' file in the config. If it is not very well this file (it was not there because you renamed it), it starts the first image he will find...

  However for ASDM ASA uses just the image you have. You were pointing to asdm5.2 and renamed, there was no valied ASDM image to use.

  In other words you must have just changed the 'asdm image"and"system start"commands in the config and point to new files, save the configuration and restart and then it would have worked fine.

  I hope it helps.

  PK

• (Maybe stupid) Question about ASDM configured PIX PIX VPN

  I have two PIX515 running v7.2 (1) and ASDM 5.2 (1).

  If I use the VPN Wizard of the ASDM to configure a site to site VPN, this process takes care of the need to create split tunnel parameters, so that the outgoing traffic non - VPN inside each PIX is managed properly?

  Hello

  By default, all client VPN traffic is encrypted and sent to the VPN server, Split tunneling is used for client vpn remote to exempt a particular traffic to be encrypted and tunnel to the VPN server so that the traffic will be sent in parallel to the internet or local.

  During the configuration of site to site intuitively that when the configuration of the remote networks on both sides that communicate together by the IPSec tunnel and all other traffic is routed to their destinations without encryption.

• Question about ASDM by VPN

  Hello again

  I configured ASA 5510 management through the inside interface.  When I'm in the office connected to the LAN I have no problem to launch ASDM.  However, when I'm away from the office and I connect via the Cisco SSL VPN Service I can't manage the ASA5510 even if I can access all the shared resources on the network.

  When I try to run ASDM when connected via VPN, I get the error message...  "Unable to launch the x.x.x.x Device Manager" (inside the ASA5510 address).

  The danger would be if I've already enabled the management through the outside interface?

  Ed

  Hello Edward,.

  Please change the pool to a different subnet of the interface of the ASA... Who will make the ASA a little crazy about communications between the local pool and the local subnet.

  You can add the following command example

  management-access inside

  Kind regards

  Note all useful posts

  Julio

• Upgrade PDM to the question of the ASDM

  I'm about to upgrade my Pix from 6.3 to 7.0 (2) and I want to upgrade to ASDM PDM but can not find documentation on how to do this upgrade. I can only find the ASDM software user guides. Can someone link me the documentation on the actual installation process?

  Thank you

  Hi rolandshum,

  Update the ios/os first img in the "normal route" (copy tftp flash) charging, and then the same with the asdm img.

  (6.x days you had to copy tftp flash: pdm, it is no longer necessary)

  IOS / ASDM come in a pair, so make sure you load the right version.

  HTH

• A few questions about the MPA

  Hello

  I m interested in AMP and I want to better understand how it works. If there is documentation to my questions (that I have found to date of didn t) it would be very nice, if you could send me the links.

  (1) when we talk about firepower integrated in Cisco ASA, is there a local sandbox running on the firewall that analyzes the files or will download all files in the cloud?

  2.) are all in of Villa or normal viruses all types of malicious files so recognized or is this feature just about malware? Is a preview available?

  (3.) if I decided to use MPAS on a Cisco ASA, is it necessary to install the software on endpoints or is - this optional to collect more data to get a better overview.

  4.) what I see in firesight with ASDM in use? If there is a threat, I see the host to which it is native or how it appears? Are the features of the ASDM integrated enough to analyze solution came threats? Where are the restrictions here?

  There are probably many more questions, but these are the most important of them...

  Thank you

  Sebastian

  Yes you are right. See the table below.

  Table 34-2 firepower Subscriptions Services

  Subscription you purchase	License you assign in the firepower system
  TA	Control-Protection (alias "threat and Apps," necessary for system updates)
  TAC	Control + Protection + URL filtering
  TAM	Control + Protection + Malware
  TAMÁS	Control + Protection + URL + Malware filtering
  AMP	Malware (the module where already TA)
  URL	URL filtering (the module where already TA)

• How to prove the historical use of vpn session ASDM Anyconnect?

  Hi Experts,

  I use Cisco ASA 5515-x.

  9.4.2 firmware

  ASDM 7.5.2

  I have a few questions:

  • How do I show Anyconnect vpn historical of the session?
  • And why when I want to display the online status of the Anyconnect client using the filter on the ASDM, the process is always stopped at 97% (photo-joint)

  Thank you

  Nodjoute

  Answers:

  Re q.1. You can see the entries of the relatively recent paper about the AnyConnect session establishment. to view historical data, you'll need an external syslog server or a tool querying SNMP. I used Kiwi syslog server and PTRG respectively and found both to be quite capable of this.

  Re q. 2. This is a bug in ASDM 7.5 (2). Later versions (e, g, currently 7.6 (1)) fix it.

  https://BST.cloudapps.Cisco.com/bugsearch/bug/CSCux37581

• How to change an existing in ASDM VPN tunnel?

  I currently have a VPN tunnel together upwards, but to change some of the configurations as making ikev2, replacing the SHA512 hash and change it in the DH group 14. I intend to do this in ASDM. I already created a group of tunnel ikev2 that I put the tunnel and created a Card Crypto that is configured with the right proposal ikev2 IPSec and Diffie-Hellman group. All other configurations such as the IP of Peer address and subnets configured and I'll work with the engineers at the other end of the tunnel to ensure that configurations are, I want to just make sure I'm not missing anything. Someone at - he never comes to change the configuration of an existing ASDM so tunnel, and it worked correctly? Here are the steps that I have will be taken as well as those I've already mentioned:

  -Edit the connection profile so that the name of group policy use the correct tunnel that was created for ikev2

  -Enter the pre-shared key local and remote pre-shared key ikev2 tab

  -Change the IKE Policy so that it uses the ikev2 policy that was created to use SHA512

  -Modify the IPSEC proposal so that it uses AES256-SHA512

  -THE CRYPTO MAP IS ALREADY CREATED

  -Change the secret of transfer perfect in group 14

  Hello

  Let me go through your questions to clarify this double:

  1. If I have a Crypto map applied to my external interface with a proposal of IPSec of ikev1 can I just add a proposal ikev2 in this Crypto map as well?

  If you have a card encryption applied to different peers outside and 3 with different order number, you will need to replace the proposal for the peer using IKEv2: IKEv2 IKEv1, the others must continue to use their IKEv1 IPSec proposal.

  2. so can I add an ikev2 with AES256 SHA512 hash proposal to my 123.123.123.456 tunnel group and continue to have all three tunnel groups always pass traffic? What happens if I add the proposal ikev2, but REMOVE the ikev1 this group of tunnel proposal because I don't want this group of tunnel use one other than AES256-SHA512 hash?

  123.123.123.456 - ikev2 - AES256-SHA512

  I would like to expand this a little more, if her counterpart 123.123.123.456, must use IKEv2, you need to declare the IKEv2 in the tunnel group and add the relevant "Local and remote PSK"--> is for phase 1, and this means that it will use the IKEv2 defined policy before, and IPSec IKEv2 proposal is on phase 2, where the encryption card is you will need to replace the IKEv1 and use IPSec IKEv2 proposal. That way it will use for the phase 1 of the policy of IKEv2, that you set and defined transformation IKEv2, by making this change make sure that both sides are mirrored with IKEv2 and IPSec policy projects, as well as the tunnel will remain and will come with the new proposals.

  This custom affect no matter what another tunnel, as long as you change the settings to the correct tunnel group and do not delete all the proposals, simply remove the profile connection, those employees.

  3. you know what I mean? All groups of three tunnels on that off interface use different cryptographic cards, with only two of the three using ikev1 as a proposal of IPSec. Which will work?

  You can only have one card encryption applied by interface, and 3 tunnels using different sequence number with the same crypto map name, you cannot 2 tunnels on the same card encryption using IKEV1, and always in the same encryption card have the third tunnel using IKEv2 (different transformation defined using IKEv2). This custom cause no problem. 

  4. what Group Policy DfltGrpPolicy? Currently use all my groups of tunnel, but it is configured for ikev1. I'm not really sure what role is in everything it can so I simply add ikev2?

  Default group policy is added by default to all your groups of tunnel (connection profile), whenever create you one default group policy is inherited him by default, you can change to group policy that you can create, group policy is a set of attributes that will be used to define something or limit , for example, for a site, you can configure a VPN filter (filters the traffic that goes through the tunnel), now back to your topic, you define the protocols that will be negotiated as for an L2L IKEv1 or IKEv2, Anyconnect SSL or IKEv2, on default group policy, and so on, it is therefore important that you add the IKEv2 , so trading will be permitted, or both to create a new group policy and add the IKEv2 Protocol; and in the tunnel group, add the group policy relevant, that you just created.

  I hope that this is precisely, keep me posted!

  Please go to the note, and mark it as correct this post and the previous that it helped you!

  David Castro,

• question of mgt ASA

  Internet<>Global MPLS WAN to other sites

  Hello! We have the configuration above in our environment. The box of the ASA is used to establish the tunnel at our headquarters if the MPLS WAN is down.

  I have question Manager box of the ASA of the network (internal LAN from other sites) other internal local network. I can ping to the internal interface of the ASA from other sites, but when I try to ssh or use the ASDM to manage, I see that there is a msg "routing cannot locate the next hop for TCP to inside inside xxxx xxxx." There is no FW between sites (thru Global WAN MPLS). I can ping each other between sites, and ssh/asdm mgt + acl to allow lan local + world was added.

  I also noticed that I cannot ping other sites of the ASA cli. I can only Ping IP ranges configured as a static route to the inside interface of the box of the SAA.

  What I see, everything works fine, it's just that I'm not able to manage the ASA box from other sites.

  What could be the problem here?

  THX

  If the error message is that the SAA could not find a route, then of course it sounds like a routing problem. My first suggestion would be to look at the error message, take the destination address of the message and check to see if the ASA has a route to this address (and to ensure that the route passes through the Interior because the error message indicates that he thinks that the destination is inside the interface)

  HTH

  Rick

• Launch of ASDM

  Hello

  I don't know if this is still supported, but I'm launching a 7.0 ASDM (6) Version PIX pix 515E and asdm-501 with no luck. I have already installed the ASDM and if attaching the ASDM launcher it will disappear. When you try to run ASDM as java applet it will get stuck on (do not close this window. )

  Cisco ASDM 5.0 for PIX will begin in another window. Close this window will cause Cisco ASDM leave.)

  I got the certificate in java preferences and add the ip address of the trusted sites.

  Update Java version 8 25

  the Java console output:

  Missing authorizations manifest attribute in the main container: https://192.168.1.1/admin/jploader.jar
  INFO: Cannot read the C:/Users/hj250031/.asdm/data/preferences.conf preferences file.
  INFO: Cannot read the C:/Users/hj250031/.asdm/data/preferences.conf preferences file.
  Exception in thread "SGZ Loader: launchSgzApplet ' java.lang.ArrayIndexOutOfBoundsException: no such child: 0
  at java.awt.Container.getComponent (unknown Source)
  at symantec.itools.c.ab.getComponent (unknown Source)
  at java.awt.Component.getHWPeerAboveMe (unknown Source)
  at java.awt.Component.updateZOrder (unknown Source)
  at java.awt.Component.addNotify (unknown Source)
  at java.awt.Container.addNotify (unknown Source)
  at java.awt.Panel.addNotify (unknown Source)
  at java.awt.Container.addNotify (unknown Source)
  at java.awt.Panel.addNotify (unknown Source)
  at symantec.itools.c.ab.addNotify (unknown Source)
  at java.awt.Container.addNotify (unknown Source)
  at java.awt.Panel.addNotify (unknown Source)
  at java.awt.Container.addNotify (unknown Source)
  at java.awt.Panel.addNotify (unknown Source)
  at java.awt.Container.addNotify (unknown Source)
  at java.awt.Panel.addNotify (unknown Source)
  at symantec.itools.c.ab.addNotify (unknown Source)
  at java.awt.Container.addNotify (unknown Source)
  at java.awt.Panel.addNotify (unknown Source)
  at java.awt.Container.addNotify (unknown Source)
  at java.awt.Panel.addNotify (unknown Source)
  at java.awt.Container.addNotify (unknown Source)
  at java.awt.Panel.addNotify (unknown Source)
  at java.awt.Container.addNotify (unknown Source)
  at java.awt.Panel.addNotify (unknown Source)
  at java.awt.Container.addNotify (unknown Source)
  at java.awt.Panel.addNotify (unknown Source)
  at java.awt.Container.addNotify (unknown Source)
  at java.awt.Panel.addNotify (unknown Source)
  at java.awt.Container.addNotify (unknown Source)
  at java.awt.Panel.addNotify (unknown Source)
  at java.awt.Container.addNotify (unknown Source)
  at java.awt.Window.addNotify (unknown Source)
  at java.awt.Frame.addNotify (unknown Source)
  at java.awt.Window.show (unknown Source)
  at com.cisco.pdm.PDMApplet.start (unknown Source)
  at t.run(DashoA14*..: 407)
   
   

  Help, please.

  Oh man, I'm sure it's a good old Java question. You will find the release notes for this version of ASDM and find out which version of Java, it supports.

  Thank you for evaluating useful messages!

• Cisco AnyConnect VPN question

  I am ASA 5505 that I am of is running correctly by using the AnyConnect client. The question is, can I connect to the fine external interface, but cannot ping or attach them to any host on the inside. When I connect, it accepts the user name and password, and I can run the ASDM or SSH to the firewall very well, but not further. In the control, after I log in, I get an IP address inside, of the order of 10.7.30.x as expected.

  Following configuration:

  : Saved
  :
  ASA Version 8.2 (5)
  !
  asa5505 hostname
  domain BLA
  activate the password * encrypted
  passwd * encrypted
  no names

  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  switchport access vlan 150
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP 10.7.30.1 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP EXTERNAL IP 255.255.255.128
  !
  interface Vlan150
  nameif WLAN_GUESTS
  security-level 50
  IP 10.7.150.1 255.255.255.0
  !
  boot system Disk0: / asa825 - k8.bin
  config to boot Disk0: / running-config
  passive FTP mode
  clock timezone STD - 7
  DNS server-group DefaultDNS
  domain BLA
  permit same-security-traffic intra-interface
  object-group service tcp Webaccess
  port-object eq www
  EQ object of the https port
  object-group network McAfee
  network-object 208.65.144.0 255.255.248.0
  network-object 208.81.64.0 255.255.248.0
  access extensive list ip 10.7.30.0 outside_1_cryptomap allow 255.255.255.0 192.168.24.0 255.255.252.0
  access extensive list ip 10.7.30.0 inside_nat0_outbound allow 255.255.255.0 192.168.24.0 255.255.252.0
  access extensive list ip 10.7.30.0 inside_nat0_outbound allow 255.255.255.0 172.16.10.0 255.255.255.0
  outside_access_in list extended access permit tcp any host 159.87.30.252 eq smtp
  outside_access_in list extended access permit tcp any host 159.87.30.136 Webaccess object-group
  outside_access_in list extended access permit tcp any host 159.87.30.243 Webaccess object-group
  access-list extended outside_access_in permit tcp host 159.87.70.66 host 159.87.30.251 eq lpd
  outside_access_in list extended access permit tcp any host 159.87.30.252 Webaccess object-group
  outside_access_in list extended access permit tcp any host 159.87.30.245 Webaccess object-group
  outside_access_in list extended access permitted tcp object-group McAfee any eq smtp
  permit access list extended ip 172.16.10.0 outside_access_in 255.255.255.0 10.7.30.0 255.255.255.0
  outside_access_in list extended access permit ip host 159.87.64.30 all
  standard access list vpn_users_splitTunnelAcl allow 10.7.30.0 255.255.255.0
  IPS_TRAFFIC of access allowed any ip an extended list
  access extensive list ip 10.7.30.0 outside_nat0_outbound allow 255.255.255.0 any
  inside_access_in list extended access permit udp 10.7.30.0 255.255.255.0 any eq snmp
  access extensive list ip 10.7.30.0 outside_cryptomap allow 255.255.255.0 172.16.10.0 255.255.255.0
  pager lines 24
  Enable logging
  asdm of logging of information
  host of logging inside the 10.7.30.37
  Debugging trace record
  Within 1500 MTU
  Outside 1500 MTU
  MTU 1500 WLAN_GUESTS
  local pool VPN_POOL 10.7.30.190 - 10.7.30.200 255.255.255.0 IP mask
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm-645 - 206.bin
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access inside_nat0_outbound
  NAT (inside) 1 0.0.0.0 0.0.0.0
  NAT (outside) 0-list of access outside_nat0_outbound
  NAT (WLAN_GUESTS) 1 0.0.0.0 0.0.0.0
  public static 159.87.30.251 (Interior, exterior) 10.7.30.50 netmask 255.255.255.255
  public static 159.87.30.245 (Interior, exterior) 10.7.30.53 netmask 255.255.255.255
  public static 159.87.30.252 (Interior, exterior) 10.7.30.30 netmask 255.255.255.255
  public static 159.87.30.243 (Interior, exterior) 10.7.30.19 netmask 255.255.255.255
  public static 159.87.30.136 (Interior, exterior) 10.7.30.43 netmask 255.255.255.255
  Access-group inside_access_in in interface inside the control plan
  Access-group outside_access_in in interface outside
  Route outside 0.0.0.0 0.0.0.0 159.87.30.254 1
  Route inside 172.16.1.0 255.255.255.0 10.7.30.1 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  AAA-server ADWM-FPS-02 nt Protocol
  AAA-server ADWM-FPS-02 (inside) host 10.7.30.32
  Timeout 5
  auth-domain NT ADWM-FPS-02 controller
  AAA-server ADWM-FPS-02 (inside) host 10.7.30.49
  auth-DC NT ADWM-DC02
  AAA authentication http LOCAL console
  AAA authentication LOCAL telnet console
  the ssh LOCAL console AAA authentication
  Enable http server
  http 206.169.55.66 255.255.255.255 outside
  http 206.169.50.171 255.255.255.255 outside
  http 10.7.30.0 255.255.255.0 inside
  http 206.169.51.32 255.255.255.240 outside
  http 159.87.35.84 255.255.255.255 outside
  SNMP-server host within the 10.7.30.37 community * version 2 c
  location of the SNMP server *.
  contact SNMP Server
  Community SNMP-server
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  Crypto-map dynamic outside_dyn_map pfs set 20 Group1
  card crypto outside_map 1 match address outside_1_cryptomap
  peer set card crypto outside_map 1 206.169.55.66
  map outside_map 1 set of transformation-ESP-3DES-MD5 crypto
  card crypto outside_map 2 match address outside_cryptomap
  peer set card crypto outside_map 2 159.87.64.30
  card crypto outside_map 2 game of transformation-ESP-AES-192-SHA
  map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
  outside_map interface card crypto outside
  Crypto ca trustpoint *.
  Terminal registration
  full domain name *.
  name of the object *.
  MYKEY keypairs
  Configure CRL
  Crypto ca trustpoint A1
  Terminal registration
  fqdn ***************
  name of the object *.
  MYKEY keypairs
  Configure CRL
  Crypto ca trustpoint INTERMEDIARY
  Terminal registration
  no client-type
  Configure CRL
  Crypto ca trustpoint _SmartCallHome_ServerCA
  Configure CRL
  Crypto ca trustpoint ASDM_TrustPoint0
  Configure CRL
  Crypto ca trustpoint ASDM_TrustPoint1
  Configure CRL
  ca encryption certificate chain *.
  certificate ca 0301
  BUNCH OF STUFF
  quit smoking
  A1 crypto ca certificate chain
  OTHER LOTS of certificate
  quit smoking
  encryption ca INTERMEDIATE certificate chain
  YET ANOTHER certificate
  quit smoking
  Crypto ca certificate chain _SmartCallHome_ServerCA
  certificate ca LAST BOUQUET
  quit smoking
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  No encryption isakmp nat-traversal
  Telnet 10.7.30.0 255.255.255.0 inside
  Telnet timeout 30
  SSH 206.169.55.66 255.255.255.255 outside

  SSH timeout 5
  Console timeout 0
  management-access inside
  dhcpd 4.2.2.2 dns 8.8.8.8
  !
  dhcpd address 10.7.150.10 - 10.7.150.30 WLAN_GUESTS
  enable WLAN_GUESTS dhcpd
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  SSL encryption rc4 - md5 of sha1
  SSL-trust A1 out point
  WebVPN
  allow outside
  AnyConnect essentials
  SVC disk0:/anyconnect-dart-win-2.5.2019-k9.pkg 1 image
  enable SVC
  attributes of Group Policy DfltGrpPolicy
  Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
  internal VPNUsers group strategy
  Group Policy VPNUsers attributes
  value of server DNS 10.7.30.20
  Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list vpn_users_splitTunnelAcl
  dwm2000.WM.State.AZ.us value by default-field
  Split-dns value dwm2000.wm.state.az.us
  username HCadmin password * encrypted privilege 15
  attributes global-tunnel-group DefaultWEBVPNGroup
  address VPN_POOL pool
  authentication-server-group ADWM-FPS-02
  strategy - by default-VPNUsers group
  tunnel-group 206.169.55.66 type ipsec-l2l
  IPSec-attributes tunnel-group 206.169.55.66
  pre-shared key *.
  tunnel-group 159.87.64.30 type ipsec-l2l
  IPSec-attributes tunnel-group 159.87.64.30
  pre-shared key *.
  !
  class-map IPS_TRAFFIC
  corresponds to the IPS_TRAFFIC access list
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  inspect the icmp
  Review the ip options
  class IPS_TRAFFIC
  IPS inline help
  !
  global service-policy global_policy
  field of context fast hostname
  anonymous reporting remote call
  call-home
  Profile of CiscoTAC-1
  no active account
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group monthly periodic inventory
  monthly periodicals to subscribe to alert-group configuration
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:e70de424cf976e0a62b5668dc2284587
  : end
  ASDM image disk0: / asdm-645 - 206.bin
  ASDM location 159.87.70.66 255.255.255.255 inside
  ASDM location 208.65.144.0 255.255.248.0 inside
  ASDM location 208.81.64.0 255.255.248.0 inside
  ASDM location 172.16.10.0 255.255.255.0 inside
  ASDM location 159.87.64.30 255.255.255.255 inside
  don't allow no asdm history

  Anyone have any ideas?

  Hello

  Please, add this line in your configuration and let me know if it works:

  access extensive list ip 10.7.30.0 inside_nat0_outbound allow 255.255.255.0 10.7.30.0 255.255.255.0

  I ask you to add that it is because you have not specified any exceptions for the return shipping. Once you add to it, will allow you to go through the tunnel VPN, packets back. When this command is not there, you will be able to access everything on the SAA but nothing behind it.

  Let me know if it helps.

  Thank you

  Vishnu

• Questions of pre-installation on IPS on Cisco ASA Cluster

  Hello

  I'm looking for some configuration directives and IPS.

  I have a Cisco ASA Cluster with an IPS Module and I would like to know the best way to go about setting it up.

  We have a customer who requires their web servers to be protected with the IPS Module.  I have the following questions:

  1. is it possible to install the IPS in learning mode type to see what kind of traffic is hitting?

  2. can you syslog alerts?

  3. is it possible to use snmp around alert also interrupts?

  4. If you put it in promiscuous mode (SDI) what it means when you receive an alert about a possible attack, an administrator must log on the

  Firewall and block traffic if they choose to do so?  Is it possible for an administrator to block traffic (or leave if his)

  a false positive in IPS) without having to connect to the ASDM?  If you have a scenario where you don't want to give users access to

  the firewall, what is the best way to go about this?

  5. is it possible to set up an alert that if this is a DDOS email alert, if it's a handshake of split then just syslog alert?

  6. I'm afraid that if I put it with a profile he can start blocking valid traffic.  What is the best way to start with IPS to protect

  a server?

  7 if its possible to syslog, what kind of detail is the capture of syslog?  Need name attack, etc.?

  A lot of questions!  I hope someone can help

  Thanks a mill

  1. is it possible to install the IPS in learning mode type to see what kind of traffic is hitting?

  Yes. There are several ways to do this, but the easiest way is to put the sensor in promiscuous mode (in the config of the ASA)

  2. can you syslog alerts?

  N ° the cisco IPS OS doesn't support syslog.

  3. is it possible to use snmp around alert also interrupts?

  Yes. But you must set the 'action' on each signature that you want to send a trap.

  4. If you put it in promiscuous mode (SDI) what it means when you receive an alert about a possible attack, an administrator must log on the

  Firewall and block traffic if they choose to do so?  Is it possible for an administrator to block traffic (or leave if his)

  a false positive in IPS) without having to connect to the ASDM?  If you have a scenario where you don't want to give users access to

  the firewall, what is the best way to go about this?

  Who should perform the analysis of IPS events have generally sufficient privilege and access to make any changes necessary to your firewall security and IPS sensors. It takes time, knowledge and skills for the analysis of the IPS. Most customer do not have the resources to do the job that you describe.

  5. is it possible to set up an alert that if this is a DDOS email alert, if it's a handshake of split then just syslog alert?

  No syslog. You can set alerts email on a per-signature basis.

  6. I'm afraid that if I put it with a profile he can start blocking valid traffic.  What is the best way to start with IPS to protect

  a server?

  Start in "Promiscuous" mode and see what hit the signatures. Investigate them, adjust your false positive until you have a tight game, an action of signatures. Then switch to online mode.

  7 if its possible to syslog, what kind of detail is the capture of syslog?  Need name attack, etc.?

  No syslog.

  -Bob

• configurting acs user has readonly access to asdm

  Hello

  How to set up a single user access only readonly GBA to asa through the asdm. Do not have permission to set up. Please help me

  Take a look at the following link that should answer your questions

  https://supportforums.Cisco.com/discussion/10825871/ASDM-and-privilege-level-using-TACACS

  Thank you for evaluating useful messages!

• Impossible to get in sensor IME or ASDM

  I have a brand new ASA 5515 X.

  I've ridden in the sensor of the CLI, gave the sensor a name, a password for the account, retained the IP 192.168.1.2 (address management ASA is 192.168.1.1), changed the time zone and DNS settings and left everything to default values.

  However, when I try to contact the sensor by using IME (or ASDM) from the management network, I get a message saying that the sensor cannot be contacted or load.

  I can't ping the sensor (not sure if this is allowed), but I can ping to the management on the ASA interface.

  What I'm missing here?

  Here are the details of the module

  Details of ips ENG-ASA-01 # sho module

  The details of the Service module, please wait...

  Card type: ASA IPS 5515 - X Security Services processor

  Model: ASA5515-IPS

  Hardware version: N/A

  Serial number: FCH1714JA2C

  Firmware version: N/A

  Software version: 4,0000 E4

  MAC address range: bc16.6520.ca86 to bc16.6520.ca86

  App name: IPS

  App status. : to the top

  App Status / / Desc: Normal operation

  App version: 4,0000 E4

  Flight status data: to the top

  Status: to the top

  License: IPS active Module perpetual

  Mgmt IP addr: 192.168.1.2

  MGMT network mask: 255.255.255.0

  Mgmt gateway: 192.168.1.1

  Web to MGMT ports: 443

  Mgmt TLS enabled: true

  ENG-ASA-01 #.

  Hi Colin,

  I have a similar problem.

  No doubt you have read the global supply of documentation as well, but I can't always solve it. My question is not quite the same, but very similar. It is not quite the same as it has different interfaces that have been configured for the management.

  I thought that I could be something when I read this, so I hope this can be useful to you:

  http://www.Cisco.com/en/us/products/sw/secursw/ps2113/products_tech_note09186a0080bd5d03.shtml

  What I have is not able to contact the IPS via the IPS ASDM button. one thing I noticed is that when logging is enabled for the record, I have an output saying that Anti-Spoofing refused a package from A to B, etc. - I'm looking for this.

  You get a similar output?

  See you soon

  Ali