question... but with the added new config/partitions cloning

Similar Questions

• How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  Pure how to install OSX on a Fusion drive and keep the recovery disc function

  These instructions assume that your iMAC partitions or file systems has been damaged and you want to restore to the way most efficiency with fusion drive and the recovery partition, similar to what was built in the factory.

  These instructions work for the iMAC, retina 5K end 2014 version comes with OSX Yosemite. The scores of major drive of the 128 G SSD and 3 TB of HARD drive has been configured as a logical drive (merger by car).

  WARNING: These instructions here are shared for interest only. Readers to take their own risk by following these instructions. The author is not responsible for any damage caused by following these instructions.

  This is the target disk partitions, and the configuration that we want to achieve.

  Disk0 is the 128 GB SSD - solid state drive and holds the start of the partition (disk0s3)

  Disk1 is the 3.0 to HDD - mechanical transmission and holds the Recovery HD partition.

  There are two EFI partitions to partition table GUID on both hard drives (disk0s1, disk1s1).

  Disk space remaining (partition disk0s2 and disk1s2) are used to create the disc of Fusion 3.1 to named "Macintosh HD".

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB LVG 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: disk1s2 Apple_CoreStorage TB 3.0 LVG

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk2

  Logical volume on disk0s2, disk1s2

  0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  Fusion unencrypted drive

  Here's how we do it.

  • A. clean reinstallation of Mac OS x.
  • 1. make sure that you back up all your data on the hard drive using Time Machine or other means. The following procedure will delete all data.
  • 2. create the OSX install USB, insert it to the MAC workstation.
  • 3. given that us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 4. in the menu at the top of the screen, select disk utilities.
  • 5. turn highlighted the volume of disk Fusion called "Macintosh HD." Click clear to clean.
  • 6. If his success, then go ahead to install OSX new to that partition, as usual.
  • 7. otherwise, if it does not, that means fusion drive has been damaged.
  • 8 follow the instructions below to fix it.
  • . B. Split disc Fusion in the physical hard disks
  • 1. Since us will be operated on the internal drive of the Mac trunk, assumes that we already have boot up OSX install USB drive (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3. on the screen of the terminal type:
  • Cs diskutil list.
  • You will see something similar to the screen below.
  • 4 copy the long string after Logical Volume and replace the UUID with it in the following command to delete the logical volume of the disc fusion (aka coreStorage of logical volume):
  • diskutil deletevolume cs UUID
  • For example:
  • diskutil deletevolume E59B5A99-F8C1-461A-AE54-6EC11B095161 cs
  • 5 copy the long string after the logical volume group and replace the UUID with it in the following command to remove the drive (aka coreStorage) fusion:
  • diskutil cs remove UUID
  • p. ex. diskutil cs remove E03B3F30-6A1B-4DCD-9E14-5E927BC3F5DC
  • 6. at this stage, the fusion drive has been deleted, and hardsisk SSD and mechanical hard drive will be reappear in diskutil or separate records.
  • 7. If step 5 or 6 takes more than 30 minutes to complete, this means that the fusion drive has been corrupted. You can follow the commands below to clear the table to partition the hard way. First command clears the SSD drive, second command erases the HARD drive.
  • The command does not return a response, after 1 minute, press Ctrl + Z to complete orders. 1 minute is enough data to code and erase the partition table on the disk.
  • cat/etc/random >/dev/disk0
  • cat/etc/random >/dev/disk1
  • . C install a new copy of Mac OS x for the hard drive HDD and tested this disk partition hard recovery work.
  • 1. go on diskutil to create a partition called Macintosh HD HDD hard drive using all the space there.
  • 2 do the same with the mechanical hard drive.
  • 3. follow the usual procedure to boot from the installation of OSX USB and install a new copy of Mac OS x hard disk SSD.
  • 4. This will create the correct priming of the partitions, recovery hard drive partitions and PSX partitions hard disk HDD.
  • 5. once the installation is complete, test if OSX may start successfully, but no need to go through the initial MAC OS x didn't put in place that we're going to waste this and do the installation again later.
  • 6. we must now test if the recovery hard drive partition works.
  • 7. reboot for hard drive recovery (see X - by pressing command and R at the same time during boot right after that you hear sound start and release only a few seconds after you see the apple logo and the progress bar for loading...)
  • 8. it is important to test and make sure that the partition of hard drive recovery.
  • D. recreate the fusion drive
  • 1 since us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3
  . on the screen of the terminal type:
• diskutil list.
• You should find that we have a list of disk group hard physical volume only, no logic here still.
• 4. you will see something similar to the screen below.
• 5. search for the largest partition on the SSD hard drive, which should be close to the maximum size of HDD to the SSD (121 G, for example) and mark the name of the device, this will usually be something like/dev/disk0s2
• 6. search the largest disk partition mechanical forming fusion with the SSD hard drive. This should be close to the maximum size of the mechanical hard drive (for example 3 TB) hard disk and mark the name of the device, this will usually be something like/dev/disk1s2
• 7
. Now let's create the merger in car (group alias logical volume) in the Terminal, type: diskutil cs create nom_lecteur driveIDs
• The number of the driveIDs is unlimited, it may be a number of discs, or a number of disk partitions. Always put the faster discs first, for example for our SSD disk0s2
• For example:
• diskutil cs create fusiondrive disk0s2 disk1s2
• diskutil - the version of disk utility command line.
  cs - This calls for Core Storage, which is necessary for the merger.
  create - creates a basic storage group.
  nom_lecteur - is the name of the drive and how you want that he
• appear in the disk utility (not the Finder - that comes later). You can call it what you like; in our example, we named our Fusion table "Fusion".

driveIDs - Here is the Player IDs of the readers you want as part of your Fusion table, separated by a space. In our example, they are 'disk0' and 'disk1', but it may be different in your configuration.
• It is important that the faster hard drive appears first in the command, which in our case the disk0s2 (a partition in the SSD). In this way, drive fusion will use this disk as primary and the cache. The second disc in the command, in this case disk1s2 (a partition on the HARD disk). The secondary disk (HARD drive) is used to store less frequently used files.  Otherwise, the fusion drive performance will be worse that it is designed for.
• 8. you will see something like below appear on the screen:
• Creation Volume logical storage of kernel
• Move isk0s2 storage of carrots
• Disk1s2 of switching for the storage of carrots
• Waiting for logical volume group appear
• Discovered the new group of logical volumes 'DBFEB690-107B-4EA6-905B-2971D10F5B53 '.
• Store LVG UUID: DBFEB690-107B-4EA6-905B-2971D10F5B53
• Finished CoreStorage operation
• 9 copy to the bottom of the string after "Discovering new Volume Logic Group" using the command + C
• 10. next, create the partition of the merger (alias logical volume) drive named "Macintosh HD".
• In the Terminal, type: diskutil createVolume groupString jhfs cs + size volumeName
• For example:
• Diskutil createVolume DBFEB690-107B-4EA6-905B-2971D10F5B53 jhfs cs + 'Macintosh HD' 100%
• diskutil - once again, this is the version of disk utility command line.
• cs - called the basic storage functions, which are necessary for this arrangement.
• createVolume - this is the command to create the storage area real for the reader who is represented by an icon on your desktop.
• groupstring - this is the long alphanumeric string you copied in the previous step. It identifies the table you created such as getting a volume placed on it.
• jhfs + -the format of the disc. It is Apple (journaled) extended Format, which is recommended for drives with an operating system installed on it.
• VolumeName - the actual name of the volume, how it should appear under the icon. If there is a space in the name, you must put the full name in quotes ("name") or put a slash before the (name Drive\) space. In our example, we made these, naming our volume "Macintosh HD".
• size : this is the size of the volume. In our example, we had a 1.1 TB drive. We used '1100g' to describe what 1100 GB (1.1 TB to base 10). Otherwise, we could have also used 1.1 T or even 100% as a size.
• 11. go to diskutil to verify that you can see this new partition on the list.
• 12. test by erasing all the data from it.
• 13. then you can go ahead to start on the USB drive to install OSX and install a new copy of Mac OS x on it.
• 14. This will allow you to keep the recovery disk feature.
• X. how Prime to recover partition
• Press and hold the command and button R set immediately after hearing the bells to boot.
• Only release it 2 seconds after you see the Apple logo on the screen and the progress bar for the start. This will start the partition of hard drive recovery.
• Y. how-to boot OSX install USB
• Press and hold the command and the optionkey together immediately after hearing the ringing of boot.
• Only release it 2 seconds after you see the Apple logo on the screen and it will give you a list of startup disk choice, choose the OSX install USB to boot from.

• Firefox becomes very slow with the all new Yahoo Mail

  Problems with the all-new Yahoo! Mail version: everything worked very well, but since the two latest updates of Firefox I started to notice that Yahoo was consuming a lot of CPU (it varies from 35% to 40% and is on the top list of programs CPU consumption) and the browsing experience is not so pleasant - slow. If I quit Firefox and reopen it, becomes faster, but after about 30 min slow / high CPU consumption again. Then I had to go back to the classic version of Yahoo Mail and everything works fine and consumed less CPU. Did I live it? Is it a question of Yahoo Mail? Is there a solution? (Macbook Pro early 2011 / Mac OS X 10.7.4 / Firefox 12.0) Thank you!

  Try to start Firefox in safe mode. This mode disables all extensions, customizations, hardware acceleration, etc., temporarily for the diagnosis and troubleshooting. If Firefox works fine in Safe Mode, then it is probably a problem with the add-on. Restart Firefox in normal mode, and then type "subject: addons" (without the quotes) in the address bar. Disable your extensions, restart Firefox between each one, until you find the troublemaker.

• marking of documents created in the last week with the word 'NEW '.

  Hi all.

  I have a mysql database with a table 'articles' containing the following (and other) fields:

  • category_name
  • Date_Created
  • level_name
  • title
  • Summary

  I have set up a query to extract information on the statutes of the db. The questioning of basic works very well. It looks like this:

  $r = @mysqli_query ($dbc, $q);

  / * display the results * /.

  If ($r) {}

  while ($row = mysqli_fetch_array ($r, MYSQLI_ASSOC)) {}

  echo "< div class ="derniers_articles"> < strong class >: < facilities >". "." $row ["category_name"]. ' < br / > < strong > < em > posted on: < facilities > '. $row ["date_created"]. ' < br / > < level >: < facilities > '. $row ["level_name"]. "< /em > < h3 > '. $row ["title"]. "< / h3 > < class p ="last_ten"> < em >. $row ["Summary"]. ' < /em > < /p > < / div > ';

  }

  mysqli_free_result ($r);

  } else {}

  echo "< p > Prob get the info you need." < /p > ';

  }

  The query gives me result like this:

  Category: News
  Posted the: 2011-02-10 22:58:05
  Level: 5, 6

  Are you interested in politics?

  There are too many young people who don't is interested not in politics. It's a secret United Nations pay no one. However, this isn't the case of Darcy Lonergan who, at 21 years old, the youngest is launching itself candidates who pour win a seat in the next Parliament.

  Now, I want to mark all records created in the last week with the word 'NEW' so I inserted the line in bold in the following code:

  $r = @mysqli_query ($dbc, $q);

  / * display the results * /.

  If ($r) {}

  While ($row = mysqli_fetch_array ($r, MYSQLI_ASSOC)) {}

  echo "< div class ="derniers_articles"> < strong class >: < facilities >". "." $row ["category_name"];

  If (DATE_SUB (CURDATE (), 7 DAYS INTERVAL < = DATE($row['date_created']))) echo "< strong > NEW < facilities > ';"

  echo "< br / > < strong > < em > posted on: < facilities > '." $row ["date_created"]. ' < br / > < level >: < facilities > '. $row ["level_name"]. "< /em > < h3 > '. $row ["title"]. "< / h3 > < class p ="last_ten"> < em >. $row ["Summary"]. ' < /em > < /p > < / div > ';

  }

  mysqli_free_result ($r);

  } else {}

  echo "< p > Prob get the info you need." < /p > ';

  }

  .. but he throws this error:

  Parse error: syntax error, unexpected T_LNUMBER in [file path] on line 31

  31 is the "BOLD" line, I inserted. Can someone tell me what I am doing wrong? ("The date_created field is a timestamp like this ' 2011-01-08 18:06:39 '.)

  I'm new to php so be nice!...

  Thanks in advance.

  Hugh

  I think I'd be inclined to do in the query.

  By example SELECT field1, Field2, field3, etc, IF (DATEDIFF (NOW (), dtCreated)< 7,="" 'new',="" '')="" as="" recordstatus="" from="">

  Then echo just the value of the recordStatus for each record.

• Why most of the tabs open empty with the label "New tab" and "topic: vacuum ' in the address line to the restart of Firefox since installing Firefox 28?"

  I have a system dual-bootable Windows Vista SP2 and Firefox updated to 28 on both systems. Since the update of the tabs more reopen empty with the label "New tab" and "topic: vacuum" in the address line of Firefox is restarted. The tabs that open correctly seem to be those who in fact, I was at the session of prefious. I can recover the missing tabs using the Session Manager to pick up a previous session, but of course it does not pick up the tabs open in future sessions. It seems that the tabs that I go to the session recovered are saved correctly, as indicated above, but which are not revisited in the context of the use of the session retrieved will drop the URL next time that I open Firefox it again.

  jdgale:

  I don't have the time to do it. However, 29 is just around the corner and we will put in the channel of exit 29, then hope that the issue is not you.

  P.S. I had originally chosen your last answer as the solution that you have migrated more to 29 but it seems that you have taken off. I'll be marking your last answer as the solution so that we can get out of the queue.

• Problem of Flash Player with the BBC News site

  My HP Pavilion laptop has a specific problem with the BBC News website.

  When I click on a video, it starts loading and then stays black. Our other PCs and laptops do not have this problem.

  The parameters are defined as the BBC help advise. It is possible to watch videos on other sites.

  I use the reader most recent Flash (uninstalled, installed again), Windows 7.

  The problem is the same with Explorer, Firefox, Opera, chrome.

  Please who has an idea of what I might try next. I tried too many forums, help and (re) install.

  Wow, I have solved my problem! Not with the help of the BBC and Adobe sites,

  just after the hard try several settings. It appeared that this global settings is not accessible when you right click on the video window. I got another window of Global setting than on the Adobe Flash site.

  The people at Adobe: why is that?

  Go to;

  http://www.Macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.html

  Set

  "Allow content to store data on your computer third Flash.

  Problem solved

• My new Apple TV v4 does not smoothly on Airplay with my MacbookPro and Air laptops but with the iPhone and iPad Airlay gets so juddery and then goes off - laptop computer WiFi connections all that happens on clues?

  Devastated to find that the new AppleTV works great on Airplay / mirroring with the iPhone and iPad devices but completely useless on the NEW laptops.

  Trying to show any video for example utube creates immediately hop on the TV screen when you use the Macbook and in no time the WiFi connection is stunned.

  What is going on?

  I use ElCapitan, and the last 15 "16GB i7 Macbook MacbookPro and not expect a problem with streaming media.

  Absolutely well on Airplay with bith an iPhone 6 Plus and also an Air iPad

  This will be due to a network problem. There is a difference between mirroring of a phone/Tablet and grow to a full desktop in real-time

  Mmake that there is no other activity (other streaming, web browsing, backup network etc.)

  Try to connect the Apple TV via ethernet

  To see a current state of the network to obtain a report of istumbler or similar. Look for the strength of the signal, noise, networks nearby

  Test on another network

• Transfer old iPad new iPad, but with the new account.

  I have a MacBook and an iPad 2, but actually the iPad is my wife, using my Apple for Apps etc ID. It syncs with my MacBook.

  We will buy a new iPad which belong to him completely, with its own (new) Apple ID I will then use the old iPad.

  How to transfer ALL of the former (who is using my Apple ID) to the new (which will use the Apple of the wife ID)?

  If you use another Apple ID you should just start fresh. Choose "set up as new" when you set up. If you mean content itunes or more by 'everything' then that won't transfer via. This content is related to the Apple which bought ID.

  If you talk about the General data (photos, documents, etc.) then you can sync on the new device when you set up.

• I usually use my account from Microsoft to connect, but with the new update that I can not connect with her

  After the new update on the login screen it asks a Skype name and password. I used to use my microsoft account to connect to Skype and therefor have no idea how to connect with this new interface. I tried every password I can think and even changed my password on behalf of microsoft and still can't connect.

  Have you tried the login with the Microsoft account option.

  https://support.Skype.com/en/FAQ/FA12081/how-do-i-sign-in-to-Skype-for-Windows-desktop-with-my-micro...

• VMware converter 5.5 failed with the error failed to partition the disk of destination

  I tried to convert the centos linux server physical to virtual. However, I received an error message at 1% as below,

  Error: Impossible to partition the disk of destination.

  FAILED: an error occurred during conversion: "CalculateGPTPartitionLocations failed!"

  
  

  Conversion of GPT partition is available vcenter converter 5.1 and higher, so the GPT partition on the source server will not be a problem.

  Tried several ways as the storage of data changing but still receive the same error message.

  Anyone encounter this before?

  Hello

  Unfortunately there is a bug with Linux P2V Converter when the destination drive is greater than 2 TB (is not whether TPG, it's size). Sorry for the inconvenience.

  The solution would be to reduce the volumes instead of destination and/or their distributed on multiple disks. Another solution would be to leave unchecked high-volume and clone them manually after the conversion.

  Another misfortune is that these workaround solutions are not possible in your case - the root volume occupies approximately 4.3 TB, and the two 'start-up' and '-' are needed to perform a conversion with the reconfiguration.

  The options I can think of are:

  -make a manual P2V, i.e. to create the destination (with partitions, logical volumes and base) computer created and formatted, clone the data (for example the converter uses tar via ssh) and manually configure the virtual machine. The final step is, fixing/etc/fstab, installation of GRUB and rebuild the initrd image

  -install new and copy data

  -Optionally divides the volume of root on the source machine if possible and then convert it. For example, to add a new drive temporarily and move some data so that all volumes become smaller than 2 TB.

  Kind regards

  Plamen

• A fundamental question/problem with the like undefined array element

  Hello everyone,

  Thanks for looking at my problem. I am very new script and javaScript, and I encountered a strange problem. I always try to solve all my problem myself, with documentation (it helps to learn) or as a last resort with the help of google. But in this case, I'm stuck. I'm sure its something very simple and elementary.

  Here I have a code that simply loads a text file (txt), load the contents of the file in a "var glad." This summary text file a font family name, every name on a new line, as:

  Albertus

  Antenna

  Antique

  Arial

  Arimo

  Front

  Barber1

  Barber2

  Barber3

  Barber4

  Birch

  Blackoak... .etc

  Now I hollow the variable content of loop, extract each letter and add it to the list '[i]' table. If the character is a line break the list [i] table adds another element (i = i + 1); That's how I separate each name in its own element of array.

  The problem I encounter is, when I have hollow loop table fontList and $.writeln (fontList [i]) is the result in the console :

  undefinedAlbertus

  undefinedAntenna

  undefinedAntique

  undefinedArial... etc.

  I don't get serious, where the undefined comes? As far as I tested each digit to be added to the array element, I see nothing extraordinary.

  ----------------------------

  ----------------------------

  Here is my code:

  #target illustrator

  var doc = app.documents.add ();

  Open the file

  var myFile = new File ("c:/ScriptFiles/installedFonts-Families.txt");

  openFile var = myFile.open ("r");

  check if it is open

  if(OpenFile == true) {}

  {$.writeln ("the file has loaded")}

  else {$.writeln ("the file does not load, check the name or the path") ;}}

  load the contents of the file into a variable

  var content = myFile.read ();

  myFile.close ();

  var ch;

  var x = 0;

  var fontList = [];

  for (var i = 0; i < content.length; i ++) {}

  ch = content.charAt (i);

  If ((ch)! == (string.fromCharCode(0)) (10))) {}

  fontList [x] += ch;

  }

  else {}

  x ++;

  }

  }

  for (i = 0; i < fontList.length; i ++) {}

  $.writeln (fontList [i]);

  }

  doc. Close (SaveOptions.DONOTSAVECHANGES);

  -----------------

  -----------------

  Thanks for any help or an explanation. If you have any tips on how to improve my practices or any suspicion, please do not hesitate to say. Thank you

  Hi vladac54380629,

  better, you try something like this:

  #target illustrator
  
  //var doc = app.documents.add(); 
  
  //open file
  var myFile = new File ("c:/ScriptFiles/installedFonts-Families.txt");
  var openFile = myFile.open("r"); 
  
  //check if open
  if(openFile == true){
      $.writeln("The file has loaded")}
  else {$.writeln("The file did not load, check the name or the path");} 
  
  //load the file content into a variable
  var fontList = []; 
  
  var content = myFile.read();
  fontList = content.split ("\n")
  myFile.close(); 
  
  for ( i = 0; i < fontList.length; i++) {
     $.writeln(fontList[i]);
    }
  
  //doc.close (SaveOptions.DONOTSAVECHANGES);
  

  Have fun

  A note:

  The real font names may be different from your own list for example:

  Arial! = ArialMT

  Birch! = BirchStd

  Blackoak! = BlackoakStd

  Concerning

• Question on erasing the HARD drive and partitions

  Hi my name is Fanta and I want to sell my laptop to someone, but I want to avoid impersonation so.
  I'll use an erasure software that will wipe away my whole HARD drive until there is no data.
  This is why I would like to know if there is a recovery on my HARD drive partition ready, and if there is a partition to the HARD drive recovery.

  Wipe tool will wipe the partition on the HARD disk. If he wipe the partition will take the recovery partition and if I need the recovery partition and I don't what will happen?

  Hello

  Generally, you won't find any recovery on the HARD drive partition. The Toshiba Recovery CD should always be supplied with the device. It must be only installed the operating system with the Toshiba drivers and utilities.
  However, if the Erase tool will also clear your partition then all files and data will be deleted.

  The HARD drive will be formatted again during the installation of the OS. If you want to use partitions on the HARD disk, you can create it in addition with Magic8 Partitions. I use this app and it of very great.

• El Capitan 10.11.2 disconnects from the network of Canon printer macbook pro after each use but with the same OS version iMac remains connected

  How to prevent my Macbook Pro El Capitan 10.11.2 going to disconnect my network printer Canon?   My iMac running the same OS version don't unplug and behaves like any normal wireless connection.  I deleted the printer and added back, reset printing, etc. nothing works.  Given that the Mac is 6 "each other and 5 feet of printer during the last test, it must be something specific to the Macbook.  The Macbook identifies the printer after each reboot the printer as printer Canon right, but once the task is completed does not have the printer.  Everything is on the same wireless network. Computer Windows also recognizes the printer and it keeps alive after printing.

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• Indexing Service Windows RT does not in with the added files.

  I have the Asus Vivo tab RT and I put all my libraries to save to the default SD card by creating a virtual hard disk on the SD card and have a special mount the reader at the start of the system.  I added this virtual hard disk for the indexing service to ensure that it gets indexed but when I add / deletes files of the libraries, they display not upward unless I rebuild the index later.  I have Windows 8 running on a desktop computer and these libraries are pointed on an external hard drive and it maintains almost instantly.  I tried to let the Tablet sit overnight after the addition of some files to see if it never catches up, but so far without success.  Is it the way it is supposed to work or is at - it something wrong with the indexing service?  Or is it because I'm using a VHD?  I can live with that for the moment, but if all goes well, there's a way to fix this or it is corrected by a software update in the future.

  You can try using a junction point instead of a montage of virtual hard disk.  I can't say this will absolutely work, but it's worth a try.

  This tutorial is off this topic, but it explains how a junction point:

  http://Skeene.NET/tech/sync-unmoveable-folders-to-SkyDrive/

• With the front camera, microphone does not work, but with the camera back, it works fine. Please give me solution

  whenever I have to video chat with anyone with front camera on they won't listen to me. Even when I record with fromt camera microphone does not work with the camera back, everything works correctly and even with siri, I can't talk more but when I take a call they can hear perfectly

  Get help with microphones on your iPhone, iPad and iPod touch...