Question of E3200

Similar Questions

• Question of port USB E3200

  Sorry if this question has already been addressed, but I couldn't find anywhere. I have a western digital 2 TB USB drive. It works fine on my intranet (my laptops and other devices can access). I have a sticky Ip address and would like to be able to access my drive to my work, but I don't know how to set up or if it can be put in place to work. USB possible transmitted port? I have the router E3200, Windows 7 operating system (if necessary)

  Thanks Jim

  What you want to do is go to FTP server area of the router on the @192.168.1.1 Storage tab and configure the port to use and what part of the disk that you want to share. Here's a guide for this.

  Also, make sure that you have chosen a password for the administrator account on the storage. If I remember correctly, it is different from the router password you choose.

  Then all you have to do is to get an FTP client and type the user name "admin" password, IP address and port number. FileZilla client is a good program.

  If you want to use a web browser, the format is ftp://youripaddress: Port number

  Don't forget to use your public IP (displayed in the status tab of the router) or you can set up a free dyndns account to make the format ftp://selected_url: Port number. In other words, unless you do not have a problem in recalling your static public IP address

• RE4100W questions

  A couple with an Extender of RE4100W problems; eplain logic my config network before listing the two questions.

  I use a dsl router that manages all functions of the router, and then an E3200 configured in Bridge mode, working as an AP. The router is in the wiring closet, so I need the separate AP. The 3200 is configured according to the data of linksys, so it has an assigned IP address. Works great, I just need the Extender to extend the signal in a section of the House.

  1. whenever the extender works, I get a message of conflict of IP address on multiple computers. Remove the Extender, the problem goes away. I tried assigning static IP end-to-end, so I know that there is no conflict and who can verify with my router data, but still, the conflict messages.  The minute that I remove the Extender, the conflicts disappear.

  2. the second question is more strange... I see solid speeds through the Extender when first powered on, but after its operation for a period of time, flow fall 9-10 Mbit/s to less than 1... becomes practically unusable. Unplug the Extender, plug it back in, and we are ready to go for a while.

  Whats strange, is that I did a test where I've disabled the 3200 and turned on its side of the dsl router wireless. Seems to work fine... the problem disappears. That suggests to me the extender works and its something involving the 3200, but there is not much here regarding the config when this thing works in bridge mode. and without the Extender under tension, or, when it is connected directly to the AP, the flow is very good.

  I tried to use both the IP of the router (which, to me, seems the ideal solution as a gateway of the extender) and the period of INQUIRY PSA as its IP of the gateway, but given that the 3200 works in bridge mode and so I'm not expecting its IP address to the IP Address of the gateway for the Extender. Two configs work, but the problem is that it is.

  I use WEP security throughout (I know, I know, but it's a long story, and go to WPA will create some problems) and just to eliminate that as a problem, switched to WPA and tested. I doubted that it was a safety issue, and that test seemed to confirm... the problem remains.

  I got the Extender configured with a static IP address in dhcp mode, makes no difference.

  Channel wifi has changed, just to eliminate a possibility, no difference.

  At this point, I don't know where to look and do not know if the two issues are related? .. .any suggestions?

  I went and did a few more tests.

  Long story short, it seems to be the security mode. I switched to WPA2, and it seems to have solved the problem... will test through the evening and confirm.

  Not sure why it has not resolved the issue before... I know that I changed it on both the parameter "input" (AP) for the Extender and the side 'stretched '. I know I have done this, if I remember this change on the access point itself.

  That said, is not to argue with what has apparently solved the problem.

• Printers attached to the port USB E3200 - addresses MAC and IP

  HI - I have a printer connected to the USB port of my E3200. It works perfectly as a network device. It happens to be an Epson Stylus Photo 1400. My question:

  This printer has now its own MAC or IP address? If yes how can I determine what they are?

  I am running Windows 7.

  Thank you very much!

  The printer still uses its own mac address and default no usb device connected to the usb port router must have an IP 192.168.1.1. For example, if you connect an external HARD drive to the usb port on the router and you want to map the network drive, and then you will use the ip address of the router to map the network drive. Same thing will also go with the printer and it will have the same ip address. The printer will get its own ip address, if this is a network printer and it is connected to the ethernet port on the router.

• Westell 7500 and linksys e3200 problems

  I used these instructions to put my Fairpoint westell 7500 modem/router in bridge mode: http://www22.verizon.com/Residential...500/123736.htm then I plugged my new e3200 to the westell 7500, but no matter what I tried, I couldn't get any PC connected to the e3200 to be able to access the internet.

  Finally, I did a full reset on the westell, who back in PPPoE mode, then I disabled wireless over the westell and then I hooked my e3200 to the westell. Now everything works. Devices connected to the e3200 either by wireless or cable are able to access the internet. Also, devices hooked to the westell cable are are also able to get to the internet too.

  My questions are:

  Is there a drawback to doing it this way? (IE, do not put westell in Bridge mode).

  This may cause any slow or conflict?

  The reasons why the bridge mode may not have worked?

  Thanks for all the useful responses. Here's what worked for me.

  First, I put my westell 7500 in bridge mode by following these instructions:

  http://www22.Verizon.com/residentialhelp/highspeed/networking/setup/versalink7500/123709.htm

  Note: for step 8, I do not chose BRIDGE ROUTED bridge mode as he suggests, instead I used the BRIDGE.

  Then I used the signs to config my e3200 for PPPoE connection:

  http://www6.nohold.NET/Cisco2/UKP.aspx?pid=80&VW=1&articleid=3687

  These instructions show how to enter you ISP providers user name and password. This is something that the linksys install software CD never asked.

• E3200 unable to connect to the Internet

  I bought a new E3200 to replace my old Linksys router.  It finds my computers and set up a network, but unable to connect to the internet via my Comcast cable modem.  I read on this forum to the questions of the Mac address, but it has located the Mac address.  Internet IP address is all zeros, and releasing and renewing the IP address does nothing.  Help!

  Connect to the computer with the Ethernet cable. Check if you are able to access the Internet.

  Open the command again.

  And do the ipconfig/all.

  Note the physical address in the Ethernet connection to the LAN card.

  Connect the Modem to the Internet Port of the router and also connect to the computer with the Ethernet cable to the Ethernet port on the router.

  Press and hold the reset for 30 seconds button.

  Cycle power to the modem and the router.

  Open the Linksys router configuration page.

  Go to the Mac address Clone and activate it.

  Enter the physical address that you noted.

  Do not click the Clone my PC MAC, Save the Settings.

  Cycle power to the modem and the router. See if you are able to access the Internet.

• iOS 10 people record problem/question

  Hello

  I have a couple of "faces" in the issue of people who are coming in white, but acknowledged same 'face' of many times.  Is anyway to update it for photo comes actually?  At a few faces, I don't know that facial recognition found since it is coming from white.

  Hi JohnP007,

  Congratulations on your iPhone 7 more running iOS 10! I understand that some of your faces in the album of people pull up as a draft and you want to refresh. You can try to use the steps below to fix the faces on the thumbnails in albums.
  

  Difficulty faces and names mixed-up

  If you notice that there is a photo of someone in a collection that is poorly identified, you can remove it.

  1. Tap the person you want to remove in the album of people > select.
  2. Type Show done face to emphasize his face in every photo.
  3. Press on each photo that is not the person.
  4. Type > not this person.

  Hide people

  You can hide the people or groups that you don't want in your album of people.

  1. Open the album people and press Select.
  2. Touch the people you don't want to see.
  3. Click Hide.

  If you want to see the people that you have hidden, press on show hidden people.

  People in the Photos on your iPhone, iPad or iPod touch

  This should be corrected without delay faces. Please use the Apple Support communities to post your question. Good day.

• Questions - and answers forgotten

  How to get my 'secret' answers to the questions that I have noted the way back when?

  If you forgot the answers to your questions of security of Apple ID - Apple Support

• I can't reset the security questions. We received notice as below:

  Hello world

  I can't reset the security questions. We received notice as below:

  "Cannot reset Security Questions."

  We have insufficient information to reset your security questions. "

  Please help me as soon as possible! Thank you very much.

  Hello

  You will need to contact the Apple Support.

  The information is available here:

  Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

  (I'm afraid that no one here can solve the problem for you - this is a user-based community).

• Question of cloning for SSD upgrade on 12 Macbook Pro

  Previously, I did an upgrade to SSD on my Macbook Air to 2012 according to the instructions of JetDrive transcend. Basically connection via USB 3 and using Mac OS X to clear (and format) disc utilities new SSD, then restore again SSD and then remove the original 128 GB SSD and insert the new 480 GB SSD.  For about a month and so far without problem.

  Now I'm trying to 2012 Macbook upgrade my Pro partner (on 10.11.6).  I got a Crucial SSD MX300 to replace his HARD drive.  Crucial comes with (or recommend) Acronis software.  And a lot of the messages of the forum recommend Carbon Copy Clone.

  My question is if I can use the same method for the cloning of the HD as my Macbook Air (just restore disk of Mac OS X utilities)?  This time, I'm upgrading HARD drive and I don't know if something is different.  At the same time, if I got lucky the first time, I don't not ruin Macbook Pro my spouse this time.

  Thank you.

  Yes, you can use disk utility to clone your MBP wives, but unlike CCC, it will not clone the recovery and Partition.

• Question about resolution movie downloads

  If I buy a movie at a certain resolution (780p for example), but I want more later re - download at a higher or lower resolution (SD or 1080 p), can I do so and how?

  Same question perhaps for music. Some of my songs have been bought before the latest Apple codecs.

  Any help is appreciated!

  THX!

  Once you have made a purchase on the iTunes store, you will see your purchased items in the menu under accounts bar > bought. You can simply select the item purchased and re-upload.

  With regard to the resolution of the film for films that are offered, and you select the resolution, you can download it again and select a different resolution. For movies that are available as separate download to SD, 780, or 1080 points, you would be limited to the original resolution you selected.

• Why I can't ask questions.

  I just have a question.  I said that I can't ask questions.

  Do exactly what you did to make this post, but your question in there instead.

• Cannot reset the Security Questions

  Hello my dear

  -J' forgot my account security questions, but I remember password

  And I'm changing my Security Questions, but show me this sentence

  "Cannot reset Security Questions."

  We have insufficient information to reset your security questions. "

  -I want to solve this problem as soon as possible if permitted

  You should contact the account of Apple security team. To join, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  (145081)

• Bootcamp Windows 10 question

  Hi all

  Stumbled upon a problem, try to install Windows 10 an end 2014 27' iMac w/retina education runs Yosemite 10.10.5. Bootcamp is V 5.1.4. 32 GB, 3.5 ghz Intel I5. Disk of 1 TB of Fusion. Before you try this, I read the guide of Bootcamp to install windows, but also a number of other tutorials and forum messages about potential problems. This research, I learned that for EDU edition you must change the name of the file from Win10_1607_Education_English_x64.iso to Win10_1607_English_x64.iso. Apparently to have the former name of the file may cause OS X to not recognize the ISO. That fact I started Bootcamp, waited while the software downloaded and created a bootable USB key and partitioned my drive giving Windows 70 GB of space. After that, I got the message that my computer is restarts. Upon restarting, I got the black screen with the blue Windows logo and a spinning loading animation. After a few minutes, a blue screen with a message "Windows has encountered and error with computer and must restart," or something similar. He was pretty quick, so maybe it's not word for Word, but it was not a helpful post in terms of saying something specific. When the computer reboots, I am sent directly to OS X, though a bit slower than normal. I tried to restart with the flash drive to see if the installer would start up, no dice. Try now the Option key at startup, the flash player is not available. Went into my settings to see if I could change my startup on Win disk install USB, no luck it no more.

  Now for the question: How can I get the Windows installation again? What I have to start the process, and if so, what should I use Bootcamp to delete the partition that was created? I have re-run Bootcamp and the only option that is checked is the partition and start and install/uninstall windows and delete the partition.

  Thanks for the help.

  Perform the following two procedures

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  If you use a USB drive, not a USB flash drive, you will have problems. It is recommended to use a 8-16 GB USB2 flash drive.

  If the installation program is located on a USB Flash drive, stop your Mac, connect the USB key, restart and hold down the alt/option key and select the Windows icon in the USB port. This installs Windows in BIOS mode. If you click the start EFI icon, it will install using the EFI mode (faster). You may need to change the partition from MBR to GPT using GPT Fdisk.

• Yahoo account question

  Yes, I understand these are the Apple support forums, but I don't know where else to ask this question and I thought some of you would have the answer to this question.

  I deleted my Yahoo account last week, but I've heard that the 500 million Yahoo accounts were hacked in 2014. I made my account in 2015. Im sure it is hacked since I made my account a year after the supposed hack, but if my account has been hacked and I deleted which would be safe?

  If your account did not exist in 2014, then it is has not been hacked. Removal of the guarantees it will not be new since there was more pirate. Normally, at least the hackers got access to more information in the narrative, as credit card numbers, change your Yahoo password would have sufficed.