Westell 7500 and linksys e3200 problems

Similar Questions

• WLC and Linksys DHCP problem

  Hello

  I have a WLC 2112 and a DHCP Server enabled on a Linksys router. I set up a wireless LAn to have the IP address of the Linksys DHCP server, but it does not work and when I configure the DHCP anthor server it works.

  Can you help me please

  Your controller cannot ping the LinkSys Router? In addition, you set up the DHCP server on the interface of the controller, correct?

• Windows 7 Home Edition Premium and Linksys E3000 and configuration problems with Dell/Broadcom half mini wireless 1501 wireless adapter DWLAN

  I'be been on the net looking for an answer requarding my Linksys E3000 router and my card adapter Mini PCI Dell/Broadcom DWLAN (DraftN) haf installed on my laptop Dell Inspiron N7010 XL 17 R and the inability to configure the card so he gets the same speed-172 wireless MBps_ as does our HP Vista Home Premium SP2 Laptop and Desktop! Yes, I spoke with Dell who seem to think that all their problems Tech and resolutions can be found with their technicians of the Manila-based Super (Word of warning-do NOT enter into the world of the concierge program of Dell Tech who, after having been assured it is based in the United States, I agreed to be a beta tester and lost my harddrive despite numerous attempts to stop the technicians to access remotely to do stupid things - but the new live Webcam and learn the hard drive but got none of my software original Dell with it as promised, too - another story). In any case, after playing with the DWLAN share of Dell said they question-nope Linksys ' cuz of course my other two computers would be quick at the speed they do. So I get ahold of Comcast, who of course told me, it's a matter of DELL. I have the WPA2 encryption on a network secure, but because my router there is no way to set up a "secure" network guest unless I have disable access to him (seems odd, he says: it is not guaranteed when someone trying to pass over the network, has knowledge password-weird with this router) it is anyway with this mini half DWLAN and the fact that it is not near the speed as the two other wireless adapters. My problem is with the speed I found all kinds of tips for use between Comcast Modem and Linksys router to make your network hum. What I want for now is someone to tell me how to configure this adapter on this Dell computer, so it does the job, it should. I have a program of diagnosis with her and from what I see, I must get off channel 1 as there is too much interference, but before I go and change the settings of the router, I want the adapter to work - especially since it's about 100 Mbps slower than our other wireless adapters. Does anyone know what should be the correct settings for this DWLAN 1501 or that I now need a new adapter in this laptop as well? Thanks for your help.

  LindaSView

  Hi Linda,.

  Have you tried to forget an instant wireless and bypass the router and cable connect directly to the modem to see if you get the speed you want in this way?  Yes, I know that this means to temporarily suspend the internet connection to the local network and also means the creation of a special no wireless connection for this computer.  But it could help determine if the problem is the computer and the router or wireless adapter - which excluding at least.

  If it works fine, then you can pass the wireless problem.  Otherwise, if it is still slow with a direct link, then you may need to consider another problem is involved and the router and adapter can actually be very well and you need to focus on all that is the bottleneck.

  I'm suggesting this to eliminate the possibilities that can be the underlying cause, while you spend your time on the development of bad (although I admit that I think that you are right and it is more likely - it can be useful a test just to be sure).

  Good luck!

  Kosh

• Linksys E3200 - what are the parameters that I need to change to get the full speed wireless?

  Hello, I never had a router before.

  I just bought Linksys E3200, because I need a wireless connection on my HTPC.

  I only put a password for my network. Don't touch or changed the factory settings.

  My main PC is connected to a router via a network cable,

  my HTPC is wiresly connected using the Linksys EA2500 wireless network card. I had a wireless connection.

  However, my internet speed on my main PC (cable) is COMPLETE and about 50 Mbit/s.

  Wireless on my HTPC is max 10 Mbpsspeed.

  My modem, router, main PC and HTPC are in the same room next to the other.

  What is the problem? What are the setting do you recommend to change?

  Thank you.

  Ensure that networks in the router (5 GHz and 2.4 GHz) have unique names on the other. This way you will know what network the HTPC is connected to. After making sure that the two networks have unique names, change the channel to the network of 2,4 GHz. try 1, 3, 6 or 9.

• Load firefox 3.6.14 and now can't access the internet. Computer restored to the previous version works now. 3.6.14 I tried again and the same problem, any ideas?

  Using windows 7. As soon as the update of firefox, I can not access Internet. I tried Internet Explorer works well. I have restored the previous computer Firefox and it works fine. Tried the update again and the same problem can not access the internet.

  This is usually caused by a firewall blocking the new version of Firefox. For more information, see https://support.mozilla.com/kb/Cannot+connect+after+upgrading+Firefox

• Performance on the Web access and the certificate problem arises

  Hello! I just bought a HP pro 8610 office jet and I'm trying to access the Scan function to access Web but performance is very slow and I just get a blank screen, no certificate appears.   I tried to do it in Chrome and Firefox.  Otherwise, the printer works fine.

  I accidentally entered a wrong email as beneficiaries on the address book and need to delete an entry via the Scan option in the Web.

  I'm on Windows 7 Edition home premium.

  Please advise, thank you!

  This has been resolved! Apparently the connection was slow for some reason any.  Just tried again this morning and the certificate that is presented and not more problems.  Thank you!

• Re: Qosmio G30 and green screen problem

  Dear friends

  I thing is interesting for any owner of Qosmio to look at this:

  http://www.asklaptopfreak.com/laptop-notebook-help/2007/07/08/Toshiba-Qosmio-G30-screen-problem/comment-page-4/#comment-130784

  http://www.asklaptopfreak.com/laptop-notebook-help/2007/07/08/Toshiba-Qosmio-G30-screen-problem/

  My Qosmio G30 is already dead, I got an estimate from the official service, to repair my qosmio costs nearly 600 pounds. Is a design flaw. Go on the internet.

  Interesting links! Thank you.
  I have to say then I must be lucky. My Qosmio G30 (German model) works well and without any problems

• Satellite A210-1AP - battery and power supply problem

  A few weeks ago I received my laptop (Satellite A210) reapair and the motherboard was changed.

  Since then, I got problem with the battery when it is inside and power cable is pluged.
  When the cable is in the laptop running on battery power I do not know why. Then when I turn it off battery led is lit Orange and the battery is charging.
  When the PC is turned on, the indicator light does not work and the battery becomes lower.

  So I wonder what the problem is.
  I read somewhere that this problem could solve the BIOS update.
  So anyone have experience like this.
  Also how is installed BIOS, I saw there is an installer for windows (so I guess it isn't hard).

  And somehow can back up old BIOS so I can go back if something bad happens.

  > A few weeks I got my laptop (Satellite A210) reapair and the motherboard was changed.
  > Since then, I had problem with the battery when it is inside and power cable is pluged.

  In my opinion, the technician has done something wrong
  The point is that this problem occurs after the exchange of motherboard and I think what this is about.

  Contact the ASP who repaired the laptop and explain your problem.
  I doubt that a BIOS update would solve this problem. I think it s a question an electrician

• Photon: Dropped calls and network connectivity problems

  I bought my Photon August 18 and he was not long for me first to the problems with network connectivity.

  The phone displays signal on the phone, but when you try to call, send text messages or surf the web. Zilch.

  A soft reset works every time. I've had some experience with the issue of the "appeal of ghosts", but had no network connectivity so often that he was too much a problem. Restores the soft 3-4 per day.

  I took the phone to the Sprint store and they told me that my phone verified and were not hardware problems that may be found. I said at the time on the update of the software of MR5 and was anxious to see how the phone after the update.

  I received the update on Wednesday and the phone worked fine. No appeal of ghost, no network connectivity not problems, only dropped the call.

  Now, Friday morning, I lost network connectivity despite seeing the strength of the signal and had to perform a soft reset to regain connectivity. My wife and I bought this phone at the same time. She had many calls interrupted before the update and we both experienced after that update eventhough signal showing on the phone is at least two if not more bars.

  Is this a known issue? Is it going to be/CAN this be corrected by a software update? Is this phone a lemon and he'll remember?

  I LOVE this phone. I don't want to get rid of it, but...

  Seriously. It's a phone! Making calls should be the FIRST thing that is done right.

  Please, someone, Motorola, reassure me that this isn't a lemon and that network problems are going to be fixed. I CAN wait, but I don't want to get stuck with two phones for $200 that need to be pampered just to be usable.

  Thank you

  TC

  Yes, it turns out that be was a buggy phone. Two stores tested Sprint phone for reception of the signal and they said that it spent; but as said the technician in the second store, the tests they take place the phone in ideal conditions.

  The two stores I've visited, said they were ready to replace the phone, but my first visit came just before the MR5 update software while I was willing to wait to see if the update corrects the problem. It didn't, but the replacement of the second store phone works fine with upgrading to MR5 and really no problem.

  I'll go ahead and mark this question as a response, but if you experience the same problems of chance complete loss of all network connectivity (Sprint or otherwise), I recommend getting the phone replaced. It is a bad camera.

  Oh and the technician at the second store mentioned the network problems. It has been a problem for them, but the most telling proof of the issue of network is random dropped calls. So if from time to time, you lose a call under the conditions of good network signal, it's probably not your phone and Sprint. I have almost that many abandoned calls as of late, so it could have been the wrong phone I had that really amplified the problem... or... Sprint has got some of the bugs in our region.

  Thank you for looking in. I hope that your problems are as easy to solve as mine and I hope that you are still within your 30 days so that you get a new replacement.

  Best wishes

  TC

• Satellite L30-134 - LAN and audio driver problem

  I installed the LAN driver but my internet is not working and I have problem whit my sound. I can't make it work in the speakers.

  Hi Smike_de,

  I think that no one can offer a solution to your problems because information and a more detailed description of the error are missing.

  What operating system you are using?
  Are you running the factory settings?
  Have you tried reinstalling the drivers?

  You can try to update the drivers. You can download it on the Toshiba site.

• My whatsapp necessary updated and I had problems making inturn I reset everything on the iphone5 he says my whatsapp was purchased and download free of charge despite being there download it still only downloads help please

  My whatsapp necessary updated and I had problems making inturn I reset everything on the iphone5 it says my whatsapp was purchased and download free of charge despite being there download it still only downloads help please what should I do

  Look for its requirements.

  I remember something similar happening to a friend of mine, but the sound of it, your phone can be updated. Aka what stop app works with earlier versions.

  But search for it in the app store to see its requirements! It will tell you!

• I use an analog input on a PCI-6224 and are having problems with the clock source

  I use an analog input on a PCI-6224 and are having problems with the clock source. I'm trying samples of 16 different analog inputs very quickly. I have the sample mode: Timed Single Point material. The rate, that I am running is the maximum (250 kHz (15625Hz per channel)). I left the default clock source and trying to taste several times. The analogue input works for a short time (2-3 seconds) and then everything stops. I'm doing something wrong or is there something I'm missing? Any advice would be great.

  That's how you samples using the sample clock clock. If you see a delay then something is wrong with how you track/data visualization.

  Single point NI the hardware is for PID control with a real-time operating system.

• Please give me solution for my computer always view your computer have persist order check and solve the problem every time when I open my computer.

  When I start my system the output display poster always your computer have Persist modula order check and solve the Problem.How to solve this problem

  Permanently?

  Hello

  
  What operating system is installed on the computer?
  
  Update video drivers and see if the problem persists.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Note: install the drivers on the manufacturer's Web site
  
  Hope this information helps.

• Blue and black screen problem

  I have the blue and black screen problem. I want to format my C drive, but he said no, that you can not format this drive. I know that I have Virus problem also and I want to format anyway. Please help me.

  Thank you

  Hello

  ·         What operating system do you use?

  ·         You get the error message?

  ·         You are able to boot to the desktop?

  Method 1:

  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

   

   

  Method 2:

   

  Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

   

   

  Method 3:

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

• Telephone calls from a man saying that he worked for Microsoft and he had problems in my area

  A man rang today saying that he worked for microsoft and he had problems in my area and if I turned on my computer it will help solve the problem. ???

  It was an international call, but I said that I had not reported any problems. What is going on???

  Relatively new user to the computer

  Hello

  Its a SCAM!

  In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
  Watch groups. Arm yourself with knowledge.

  No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
  computer. So that's the fraud or scams to get your money or worse to steal your identity.

  Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
  phone calls to help you fix your computer
  http://www.Microsoft.com/protect/fraud/phishing/msName.aspx

  Scams and hoaxes
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3

  Microsoft Support Center consumer
  https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1

  Microsoft technical support
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  Microsoft - contact technical support
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support

  I hope this helps.