Start with an external display in VISTA with an HP dv2000 laptop
Hello
My HP laptop screen is broken, so I need to use an external monitor. Unfortunately, the screen not active really up to what I'm going to connect to the page into account. This means that if I want to access bios, upgrade to a new operating system, or to do other things, I'm completely blind.
Is it possible that I can get the operating system to start with my external monitor.
Please note: I have a strong experience of PC and I'm decent to things like the change of systems. So feel free to suggest something dangerous or risky.
-Hamed
Unfortunately, what you want to do is not possible. The system should be launched before the second monitor is enabled (and you can't have the main monitor an external monitor on a laptop). If you want to see what you do with stains where the disk hard operating system is not in use, you have no other choice than to repair your laptop screen (it does not cost much more and if you get only one monitor (and not the entire upper eyelid) you can replace exactly that and it shouldn't cost as much as a whole new lid (assuming it's the monitor that is the problem and not) (not something in the lid) anywhere near). I did myself on my Dell and it wasn't easy by any means and I had to use tiny tools, I had not used in years (and if ever I need to do it again, I could just let a technician computer repair or Dell even myself worth) - but it can be done.
There is no way to say BIOS (or something else) to use the external monitor as primary monitor - the controls are not there, and even if they were, the connections would be not activated by the system (and you cannot do it from the BiOS unless / until the system works). You might be able to do the main monitor once the system is working, but not until then. I appreciate your computer experience and a willingness to try something dangerous or risky, but it is not a question of who - it is just possible iisn can't with any Windows OS I know and probably other software of OS as well (and I'm not sure I would even suggest something dangerous - perhaps risky - even if I knew it would work because I'm tryng to help solve the problems and not cause) new or worse those).
I would just bite the bullet and contact HP and get the laptopr fixed or at least get the part and try to do it yourself (a bit risky, difficult, time consuming and who need very small tools to accomplish if this can be done on a HP as it did on my Dell - you need HP technical support or parts if it is possible and that the difference in cost to ensure that it is possible) and useful effort).
I'm sorry if this isn't what you wanted to hear, but it's like that.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Tags: Windows
Similar Questions
-
Connect the external display using VISTA
I plugged the external monitor at the top of the Tower, but only get a blank screen on monitor. Lap Top is still as main screen.
Hi Jim,.
I suggest you to refer to the links and check if it helps.
Solving the multiple monitor problems
Understanding multiple monitors
It will be useful.
-
Satellite M50-130: no display after the passage of the external display in main monitor
I have a very strange problem.
My brother was on his user space as soon as possible and I managed to get the secondary monitor for main monitor and disable the screen of the laptop back, however, when it comes to me, it won't happen...Well, any help would be appreiciated.
Hello
Could you please be clearer? Is it possible to see something on the external monitor?
Do you see something? What happens if you use the function FN + F5 device display?I put t know how you managed to set the external display as main screen because on my laptop, this option is grayed out.
However, you should see the laptop if you will start Notepad in safe mode. Please check! -
Start with an external display Vista on HP laptop
Hello
My HP laptop screen is broken, so I need to use an external monitor. Unfortunately, the screen not active really up to what I'm going to connect to the page into account. This means that if I want to access bios, upgrade to a new operating system, or to do other things, I'm completely blind.
Is it possible that I can get the operating system to start with my external monitor.
Please note: I have a strong experience of PC and I'm decent to things like the change of systems. So feel free to suggest something dangerous or risky.
-Hamed
Hi hamednilforoshan,
See the following article useful information and some troubleshooting:
http://www.Microsoft.com/athome/organization/twomonitors.aspx
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
kernel_task runaway (from 300 to 600%) CPU with 2 external displays
I have a MacBook Pro (retina, mid-2012), and for a year and a half, I've had episodes fighter during the kernel_task suddenly begin to consume all processor CPU (from 300 to 600%), is the response of the system so slow it is impossible to use. I experience these episodes throughout the front 1-2 years that the machine went from Yosemite El Capitan and now Sierra.
Normally, I use my MacBook with two external displays, both at work and at home. At work, I have two external screens of Lenovo, and at home, I have two screens Apple (Apple Cinema Display 27-inch and 27-inch Apple Thunderbolt Display). I discovered that this kernel_task high CPU usage can only be stopped by disconnecting one of the external screens. After unplugging an external display, the kernel_task subsides immediately to normal (< 5%). After a few minutes, I can reconnect the 2nd external screen and proceed normally (sometimes for days, sometimes for hours, sometimes for a few minutes) until the kernel_task pulls up to 300-600% again. The use of the high CPU kernel_task never happens unless I have two external displays connected.
Note that since I upgraded to MacOS Sierra fugue kernel_task CPU frequency has increased considerably: of 1 kernel_task runaway every several days to a runaway almost every 10 minutes or so. I don't have a reason this frequency has increased, but the runaway condition seems to have worsened by the fact that the photoanalysisd daemon is running like crazy on my grand (72 000) library of Photos.
Also note that I started in recovery mode and have re-installed MacOS Sierra, and it has no effect on the runaway kernel_task.
Any ideas on how to fix this resumption of kernel_task of all my CPU?
I have attached my EtreCheck system report below. This report was captured with two attached external displays. At halfway while generating a report, the kicks and started kernel_task hogging CPU again.
EtreCheck version: 3.0.5 (309)
Report generated 2016-09-25 14:24:02
Download EtreCheck from https://etrecheck.com
Time 07:59
Performance: Below average
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Problem: Computer is too slow
Description:
Sometimes, while working with my MacBook connected to two external displays, the kernel_task pulls up to 600 to 800% CPU and stays there until I unplug at least one of the external screens. After disconnecting, the kernal_task subsides immediately to normal (< 5%). After a few minutes, I can plug the 2nd external screen and proceed normally (sometimes for days, sometimes for hours, sometimes for a few minutes) until the kernel_task pulls up to 600 to 800% again. The use of the high CPU kernel_task never happens unless I have two external displays connected.
MacBook Pro (retina, mid-2012)
[Data sheet] - [User Guide] - [warranty & Service]
MacBook Pro - model: MacBookPro10, 1
1 2.6 GHz Intel Core i7 CPU: 4 strands
16 GB RAM not extensible
BANK 0/DIMM0
OK 8 GB DDR3 1600 MHz
BANK 1/DIMM0
OK 8 GB DDR3 1600 MHz
Bluetooth: Good - transfer/Airdrop2 taken in charge
Wireless: en0: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 242
Graphics Intel HD 4000
NVIDIA GeForce GT 650M - VRAM: 1024 MB
Color LCD 3840 x 2400
LED Cinema Display 2560 x 1440
Thunderbolt Display 2560 x 1440
macOS Sierra 10.12 (A 16, 323) - since the start time: about an hour
APPLE SSD SM512E Disk0: (500,28 GB) (Solid State - TRIM: Yes)
EFI (disk0s1) < not mounted >: 210 MB
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
Boromir (disk1) /: 499,05 (Go 140,24 free)
Storage of carrots: disk0s2 499.42 GB Online
Apple Inc. FaceTime HD camera (built-in)
Apple Inc. Apple keyboard / Trackpad
Apple Inc. BRCM20702 hub.
Apple Inc. Bluetooth USB host controller.
Apple Inc. Apple LED Cinema Display
ISight Apple Display Inc.
Apple Inc. Audio display
Apple Inc. FaceTime HD camera (display)
Apple Inc. Apple Thunderbolt Display
Apple Inc. Audio display
Apple Inc. Thunderbolt_bus.
Thunderbolt Inc. Apple display.
/ etc/sudoers, 2299 but file size expected 1563
Mac App Store and identified developers
/ Applications/Beats Updater.app
com.beatsbydre.BeatsDFUSupport [no charge] (2.1.0 - SDK 10.10 - 2015-10-29) [Support]
/Applications/proxifier.app
[no charge] com.initex.proxifier.macosx.kext (2.15.2b1 - SDK 10.7 - 2015-09-10) [Support]
/ System/Library/Extensions
[no charge] com.makemkv.kext.daspi (1.5-2016-09-25) [Support]
TiVoDesktop: Path: / Library/StartupItems/TiVoDesktop
Startup items are obsolete in OS X Yosemite
[no charge] 7 tasks Apple
[loading] Apple 156 jobs
[running] Apple 108 jobs
[loaded] com.apple.jetsamproperties.Mac.plist (2016-08-25) [Support]
[no charge] 41 tasks of Apple
[loading] 153 jobs Apple
tasks of Apple 109 [performance]
[cannot] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a725c38014c95072f92651fb65e1bf9c8e43c37a2 3d420d.plist (2016-07-11) [Support]
[loading] com.cisco.anyconnect.gui.plist (2014-06-10)
com.DisplayLink.UserAgent.plist [no] (2012-08-14) [Support]
[loading] com.google.keystone.agent.plist (2016-07-11) [Support]
[loading] com.oracle.java.Java - Updater.plist (2013-01-04) [Support]
[loading] com.adobe.ARMDC.Communicator.plist (2016-07-11) [Support]
[loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-07-11) [Support]
[loading] com.adobe.fpsaud.plist (2016-08-29) [Support]
com.backblaze.bzserv.plist [running] (2016-07-11) [Support]
com.Cisco.anyconnect.vpnagentd.plist [running] (2014-06-10) [Support]
com.DisplayLink.usbnivolistener.plist [no] (2012-08-14) [Support]
[loading] com.google.keystone.daemon.plist (2016-09-09) [Support]
[loading] com.oracle.java.Helper - Tool.plist (2013-01-04) [Support]
[loading] com.sharpcast.xfsmond.plist (2013-11-30) [Support]
com.backblaze.bzbmenu.plist [running] (2016-09-25) [Support]
com.vladalexa.MagicPrefs.plist [running] (2016-09-25) [Support]
iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
HWMonitor Application (/ Applications/HWMonitor.app)
Hidden CPULed Application (/ Applications/CPULed.app)
Application of hidden activity monitor (/ Applications/Utilities/Activity Monitor.app)
Dropbox application (/ Applications/Dropbox.app)
Hidden SizzlingKeys Application (/ Applications/SizzlingKeys.app)
Beats Updater Application (/ Applications/bat Updater.app)
Hidden NET Monitor Application (/ Applications/Net Monitor.app)
FlashPlayer - 10.6: 23.0.0.162 - SDK 10.9 (2016-09-15) [Support]
QuickTime Plugin: 7.7.3 (2016-09-13)
AdobePDFViewerNPAPI: 15.017.20053 - SDK 10.11 (2016-08-03) [Support]
AdobePDFViewer: 15.017.20053 - SDK 10.11 (2016-08-03) [Support]
Flash Player: 23.0.0.162 - SDK 10.9 (2016-09-15) [Support]
Silverlight: 5.1.20913.0 - SDK 10.6 (2014-03-07) [Support]
JavaAppletPlugin: Java 8 update 101 build 13 (2016-08-18) check the version of
WebEx64: SDK-1.0-10.10 (2016-01-23) [Support]
Ghostery - GHOSTERY, Inc. - https://www.ghostery.com/ (2016-03-15)
Backblaze backup (2016-07-11) [Support]
Flash Player (2016-08-29) [Support]
FUSE for OS X (OSXFUSE) (2013-11-30) [Support]
Java (2016-08-18) [Support]
MagicPrefs (2016-01-20) [Support]
MenuMeters (2014-10-22) [Support]
TiVo Desktop (2009-11-23) [Support]
Skip system files: No.
Mobile backups: OFF
Automatic backup: YES
Volumes to back up:
Boromir: Disc size: 499,05 GB disc used: 358,81 GB
Destinations:
Frodo Time Machine [Local]
Total size: 999,86 GB
Total number of backups: 40
An older backup: 09/09/16, 02:09
Last backup: 25/09/16, 11:49
Backup disk size: too small
Backup size GB 999,86 < (disc 358,81 GB X 3)
345% kernel_task
56% Information System
44% cloudphotosd
42% iTunesCacheExtension
30% activity monitor
Top of page process of memory: ⓘ
1.44 GB kernel_task
1.18 GB com.apple.WebKit.WebContent (6)
786 MB mds_stores
590 MB bztransmit
Mdworker (18) 492 MB
256 MB of free RAM
4 pm used GB RAM (5.96 GB being cached)
768 KB used Swap
25 sep, 2016, ~/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2016-09-25-134618_ 13:46:18 [redacted] .crash
System/Library/Frameworks/WebKit.Framework/versions/A/XPCServices/com. Apple.We bKit.WebContent.xpc/Contents/MacOS/com.apple.WebKit.WebContent
25 sep, 2016, 13:19:15 /Library/Logs/DiagnosticReports/photolibraryd_2016-09-25-131915_[redacted].cpu_ resource.diag [details]
/System/Library/PrivateFrameworks/PhotoLibraryPrivate.Framework/versions/A/Supp ort/photolibraryd
25 sep, 2016, 13:06:44 test - passed
September 22, 2016, 16:03:11 ~/Library/Logs/DiagnosticReports/Microsoft Word_2016-09-22-160311_ [redacted] .crash
com.microsoft.Word - Applications / Microsoft Office 2008/Microsoft Word Word.app/Contents/MacOS/Microsoft
Start safe mode, use this way and see if the problem is recurring
-
Qosmio F30 starts with blue stripes during Vista boot screen
My Qosmio F30-114 runs for years without problem with Vista Ultimate.
In recent days, there is a huge problem.
The Qosmio starts with blue stripes during vista boot screen.
So I deleted the driver for the graphics card and used the standard vga driver for the card. the wizard of material found one driver on the system.
For a brief moment, I was very lucky.After a reboot, there was a blue screen. After the next restard again once the driver to the standard vga card.
What can I do?
The download section of toshiba has no drivers for graphics card.
And really... I wonder - how it works every year without problems...Someone at - it a solution?
thanx
toshibalover ;-)
Hello!
First you have this problem on an external monitor too or only on the screen internal? Maybe it s is not a graphics card problem so check it with an external monitor.
I checked the Web from Toshiba site and I can find drivers for the Qosmio F30:
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download driversGood bye
-
Portege R700 with docking station may not automatically switch to the external display
Hello!
In the past, we bought a lot of A600, R500, S10, and always a docking station for every laptop here at Desjardins, we bought.
Now we have a little problem with the new R700 model: PT318C - 00G 001,
We bought 30 of them.WHY when we put in the tie-down (with the nearby screen) it can display automatically to the external display no/switch? (in this case a 22inc LCD)
It is connect with the HDMI/DVI cable. And when we get the display by sliding in the graph of intel and media panel (V 6.14.10.5258), after a reboot of the docking, the screen is all buzzy... sometimes both screen are dark, and we must use a combination of keys to move.
It's really not easy to use for our users...With the old model as the A600 or S10, all have always worked well, if we are on the dock, the pop screen directly on the external LCD, so I stopped him, ondock it and start up of all is well on the screen of the laptop.
We are on Windows XP Pro SP3.
I tried the utility Toshiba display device change and expansion Mobile from Toshiba. are not clear...
Thanks for your help.
Have you installed a version of vanilla from Windows? Or XP has been installed from the Toshiba Recovery Disc?
Maybe you are missing several key structural factors (common modules for example). Also make sure that you use the drivers to display on the Toshiba site.Also try a BIOS update (v1.70 is the last one I think).
-
Using the external display with Satellite A100-PSAA9
I have a problem when I connect to an external monitor of 2º, it connect but next it disconect, it's always the connection and disconecting. I did update the bios and the display driver, but I still have the same problem, what can I do?
My operating system is windows vista.
What do you exactly mean with disconnection and connection?
The switch to internal and external display or the display on the external monitor will simply disabled.Have you checked the connection to the laptop computers monitor port?
-
Broken screen, external display mode standby with Satellite A10 S203
Of my Toshiba Satellite A10 S203 screem is broken, it's all guts, the colors and the black spaces. I plugged the laptop with an external display, but as soon as Windows starts the external display is in stand by. How can I change this?
Hello
I had this problem as well before. After Windows starts the video reset Resets the video output to LCD screen instead of external monitor. Once this is the case try to use the Fn + F5. If this does not work, you might be able to start and press F8, once it gives you the windows selection menu go to safe mode. Once there go to video properties and change the default settings for the external monitor and try to restart normally. Should do wonders. Hope this helps, if not let me know.
-
rMbp mid-2014, external display with the quality of the retina
Hello!
I buy a Dell 24 "external display to connect to my rMBP with QHD (2 560 x 1 440) resolution.
I have connected the screen to my mbp with the mini display / port cable supplied with the display screen. It works well, but I don't have quality of retina at all (the images seems good but the text is terrible)
The text have a bad record as a retina screen, and it makes a big difference when I spend my retina display to the external display which is not comfortable at all.
I though that this kind of screen was OK to view the retina... but I was wrong. I try to connect with minidisplay / display and HDMI! HDMI made was worse than minidisplay. The res in the system report show was good 2 560 x 1 440. I even try the hack to force with the patch, but always bad RGB render text...
More important, I want to, it's having the same record as retina on the text and images. What external display can be good for this?
My budget is 450-€500
Thank you
The size in pixels of the screen is not mean much: a small display to 2560 x 1440 pixels seems much sharper than a widescreen 2560 x 1440 pixels.
Your retina Macbook has something like 220 dpi (DPI in English), the Dell screen only 117. If you want the same sharpness, you will need to choose a display with 220 dpi. But then, everything on the screen will look much smaller. Here is a tool that allows you to get the idea: http://dpi.lv/
-
Satellite A300-19 q - how to start with an external USB drive
Hi all!
I have a (old) TOSHIBA Satellite A300-19 q bought in 2008. I wanted to do a clean install of Windows 7 by reformatting my HD. The problem is that my internal DVD drive no longer works. So I tried to boot from the Windows 7 DVD installation with an external USB drive.
Unfortunately, I couldn't find a way to boot from USB devices in my BIOS options.
My BIOS is up to date (version 4.20) from Toshiba Web site.So I was wondering, does anyone know if the A300-19 q can boot from USB devices?
Thank you in advance.
I have A300 at home but I never tried to start with an external USB device.
Start your laptop and press F12 to get into the boot menu. There must be USB option. What happen when you try to use it? -
HP Pavilion dv6000 (Vista) starts with a blank screen with a cursor after the original hp logo screen. Cannot get it to boot Windows. Any thoughts on next steps?
I remove the hard drive and attach it to your desktop and use the host operating system to run a check disk on your drive. The laptop goes hard disk looking for instructions to start and he does not see the correct code. This is probably due to a damaged boot sector. Another idea is that your bios has changed and you have changed the SATA from AHCI to IDE type somehow or vice versa. You also left a non bootable disk in the DVD/CD drive. Remove all disks from your DVD.
-
computer a824n of office doesn't start with an external hard drive 2T connected.
My HP Pavilion a824n desktop computer won't start with my new external hard drive 2T connected via a USB port. The computer stops on the first screen, which I think is the Intel screen, with options for press ESC, F1, F10. But these keys do nothing. The only way out is to press the power button until the computer turns off.
If I disconnect the external drive before turning the power on, the computer starts normally, the internal hard drive. After that, I can connect from the outside and it works correctly, so I don't think that there is a defect in it.
I can get into the screen of the BIOS settings to start with the external drive disconnected and by pressing the F8 key. But the BIOS shows adequate priority, with the hard drive screen internal first, second DVD, third CD. The internal hard drive is correctly identified by the model number and the new external drive is not at all (because I started without the connected external.)
My guess is that when I start with connected externally, BIOS thinks it's the hard drive, it is supposed to boot from. How can I get the machine to boot from the internal drive?
Your guess is correct. The hard part is that I'm not sure of an exact solution I've seen this be something difficult to solve.
Have you tried to update the firmware of an external drive?
Have you updated your PC BIOS? If you are still running XP, I think that it is the update to the BIOS of your PC:
-
Windows Vista starts with empty office and the mouse cursor, then restarts
I have trouble getting Vista to start on an Acer laptop. The laptop is an Acer Aspire 6920 G with Windows Vista Home Premium 32 - bit on it.
The PC will start in an empty office with stop mouse cursor on this screen for about a 1 min and then it restarts and you go through the same process again. I tried the safe mode and last good configuration to know but get the same results. I have also tried to run the Startup Repair tool and get the same screen. I can launch Startup Repair to boot from a DVD of Vista Home Premium 32-bit and I can run but it makes no different. When you restart, you get the same problem.
Does anyone have an idea?
No it isn't the trunk upwards with the black screen and the mouse.
Hi KevinBricknall,
1. have you made a recent software or hardware changes to the system?
Since you are unable to run start up repair boot from the Vista disc, you can try to perform a system restore start from the disc and see if it helps.
For more information, you can consult the following article:
What are the system recovery options in Windows Vista?
Hope this information is useful.
-
Defender fails to start with error 0x800106ba after application Vist SP 1
I used Vista service pack 1 and now advocate does not start with a code of error 0x800106BA. I tried to uninstall it, but has not found how do for anywhere. I also tried to reinstall but the system says it is the first part of Vista. Any ideas?
I used Vista service pack 1 and now advocate does not start with a code of error 0x800106BA. I tried to uninstall it, but has not found how do for anywhere. I also tried to reinstall but the system says it is the first part of Vista. Any ideas?
You have already discovered, your AV closed your Defender Windiows because your AV has his own Defender, and having 2 defenders on the same machine will create conflicts.
List of the AVs that will stop Windows Defender are...
Microsoft Security Essentials
Norton
MacAfee
AVGCanoe uninstall you or reinstall Windows Defender. It is part of the operating system. He lives and dies with the system.
You do not get 0x800106B error code if you try to open Windows Defender, which is disabled by your AV.
So, question:
What did you want to do what it will take to open Windows Defender?If you try to enter the startup programs, you can do without going through Windows Defender.
Start < in="" the="" search="" box,="" type="" msconfig=""> Startup tab > here is the list of startup programs...
To disable - uncheck the box.
To activate the checkbox....WARNING: Make sure that you know for sure to turn it off. If you are not sure, ask first.
Maybe you are looking for
-
Back to zero makes the bright high-nothing else.
-
I just bought printer HP psc 1110 and despite I loaded the print from the HP website driver and together it up correctly, it has new ink cartridges, it does not print color to color text pages when I use the the keyboard F12 shortcut key to show. I
-
I'm trying to find a way to get data from when a system first have been added in TMS or replaced. If the system was replaced, I would like to know the replacementdate and not the date to add the system that has been replaced. We decided to terminate
-
The Widget Menu text alignment
Widget menu: Is it possible to align text centered in the top - Menu and pages to the left in the Menu of subpages?
-
Adobe applications in the wrong language
When I download apps, they come in Danish. I don't speak Danish. How can I configure my applications so that they will come to me in English?