Question of packing

Similar Questions

• Journal inisght - question content pack SQL

  Hello

  Seems to me a mistake with happy pack SQL Log Insight.

  Environment - Log Insight 2.5 (problem also on version 2.01), Windows Journal Insight client version 2.5, MS SQL 2008R2 and Server Windows 2012

  in the log file, I came across this article:

  2015-01-12 16:51:25.407580 0 x 00001414 < error > FLogCollector:1357 | Specification of missing or invalid directories.

  2015-01-12 16:51:25.407580 0 x 00001414 < error > FLogCollector:207 | Invalid parameters were obtained for the channel "MSSQL." Channel < filelog | MSSQL > will remain inactive until this as correctly configured.

  I have configured the MSSQL entry in the file liagent.ini as:

  [filelog |] MSSQL]

  Directory = Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log

  Charset = UTF-16

  Am I missing something here, because it is according to the instructions on the market place?

  I can see data are sent to the insight Journal, only it isn't linked :-(SQL

  any help is very appreciated

  Thank you

  Harold

  There is a typing error in the list, it must be small d for directory.

• HP PSC 2410 all-in-One - use in 64-bit environment of Windows 7

  Hello

  I've had this all-in-one HP PSC 2410 printer for a few years now and it has worked quite smoothly in an environment Windows XP Pro SP3 for the time.

  A few months ago, I bought a new computer system and went to the Windows 7 64-bit OS (not interersted in Windows 8 at all) and I installed the printer successfully and it works, the software suite provided with the printer on the CD will not install for this environment and so I have more access to the different Maintenance Options that were available in Windows XP Pro OS such as cleaning and fax options.

  Looking for something for Windows 7 64-bit operating system threw up two options - update driver and utilities Assistant tool.   After getting off the route to update the driver, no software suite was available, and in fact the update said that the driver has been installed by Windows 7 automatically.  This seems to be the case as the printer works very well in print mode, mode of scanning (in the desktop menu) and it detects SD cards in the slots.

  However, there is no software to allow me to fax or clean or do any of the other options available in the HP Suite provided on the CD.

  Down the utility road has downloaded me a file - HPPIW. EXE - look at my current installation of the printer and check with HP for updates.   After several attempts, the utility simply CANNOT find my printer even if it is installed, running and even windows sees!   No amount of recycling the POWER button or restarting the computer allows this utility to detect the printer at all.  It is installed via USB on PC family of 64-bit Windows 7 and windows updates current are always fully updated.

  I considering buying a new HP OfficeJet 8600 Pro Plus to use as printer family with Windows 7 system - and move this HP PSC 2410 upstairs to connect directly to my Office Windows XP Pro SP3 staff and use the original CD to install it.  My Canon IP4200 Pixma just die on my own PC, on the floor.

  However, until that I do this, are there any available software suite that could work in the environment of Windows 7 that would allow me to use the various functions such as fax and cleaning that were available under the old XP environment and gets through the CD?  As a result of software never updated for Windows 7?

  Thank you

  Lee James

  The UK West Sussex

  Hi BAW9DV,

  I can't wait to hear that you have questions.  While there isn't a utility software that will complete the desired tasks, maintenance can be completed from the front of the unit.  Windows also has a request for the fax from the computer so that may work with this device. See the information below which can activate the functions you want.

  Sending faxes:

  1 fax and scan Windows use

  A. Type Windows Fax and Scan in the search box

  B. set up Fax for use.  Click here to see the Microsoft documentation for usage.  Note: This is a 3rd party Web site. HP and I are not responsible for the content of this site.

  C. Select New Fax

  Front panel maintenance tasks:

  Running the print cartridges clean utility click here

  Setf-test page click here print

  Evaluate the test page click here

  Align the cartridges: press Setup, press 5, then press 2

  If you work around options are not acceptable the 8600 model would certainly meet your needs in comparison with this camera.  However, I encourage you to contact HP to see what upgrade options are available for this device. It will probably be another Photosmart design unit, but in many cases, upgrades are available at a discount to our valuable clients guaranteed.  Global coordinates can be found here.

  PS If you pass through technical support, remember to ask questions on packs.  Extended warranties may also be available at a reduced rate for the upgrade.

  I hope this helps!

• trying to jquery mobile (alpha2) working in a Blackberry widget

  Sorry, I'm rather new with widget development.

  I try to get mobile jquery working in a widget on a blackberry 9780.
  If anyone has tried it, please let me know if it is worth.

  My first question was that jquery uses dashes in filenames, which seems
  be banned in Blackberry widgets, so I had to change all the dashes to emphasize.

  Today's question is Packer message: "Invalid widget archive - reserved found directoy.
  No error number. Y at - it a packager error messages published index. Are there rules

  on the directory names? They have to be reported in the xml file?

  bbwp version - 1.5.0.18

  mobile jQuery - 1.0a2

  resolved - Packer Widget was to launch "/ bin" directory. I guess "/ bin" is a reserved directory name.

• Recommendations on domain DR

  I'm trying to document our recovery of WebLogic and have some questions about best practices.
  
  (1) if my physical server goes down and I'm trying to get my WebLogic domain name back up as soon as possible on another machine should I:
  (a) have the 'unwrapped' field of archive most recent (which had a 'pack' done about it)? (I guess that WebLogic will need to be installed first on the new server and do not appear in the field decompress?)
  (b) request a complete copy of the area restored from a copy of the file of the domain? (This would probably have installed first WebLogic)
  (c) have the field installed from a model that was built of generator model? (I guess WebLogic should be installed that is not part of the model?)
  
  ('B' seems to be the fastest answer to me, but please confirm if there are reservations about this approach and if/why it would be best to use the pack generator or model for this)
  
  
  (2) here, the assumption that the IP addresses would be the same for new machines, however, if they were not, these just would be a matter of editing the config.xml file to the new IP address? Or is there more to consider?
  
  (3) if the environment is clustered models make (or jar pack) on both servers? (These 2 servers in the cluster ARE registered in the area and therefore have a domain, config.xml.etc... as well).
  
  
  Thanks in advance for any experience or knowledge on how best to handle this...

  Hello
  1. I wouldn't recommend unpack approach. First thing, it is, YES, do not install the Weblogic version server exactly the same. Then run unzip command. But the main question is packing and unpacking may not copy all the resources of the domain configuration as a source of data AD/configurations settings, JDBC, JMS stuff etc. If I'm not mistaken in general we use pack/unpack to create managed on the remote machines in an env clustered servers.

  2 copy the complete folder field completely, it's a quick and sort of a reliable way to get back in business. Of course, you must have Weblogic Server same version installed in the same exact folder structure. Also if you have any external JDK, you need to install them too. Now if the IP address is different, just modify the config.xml file for updating the new IP address. It's the only place.

  3. model is mainly during the development phase. We create a domain, configure all the stuff. Then export it as a model. On the other remote machine, first install weblogic server. Run the Configuration Wizard and create the new domain based on this model. Now, some things are configurable as password etc to the field again. But the point is, you had to do extra work such as the creation of domain etc.

  4. If the Env is clustered, do you always model Pack or only from the main master machine that has AdminServer and all other configurations. Because the remote control or other machines with managed servers, just get a copy of master admin machine each time. Then managed servers is just a copy but not the original.

  So ideally, have a regular backup of the domain folder and use that is a quick fix. If this fails, use model approach. If that fails, the last option is to pack/unpack.

  Thank you
  Ravi Jegga

• Questions about the upgrade to Service Pack 3.

  I want to install visual studio 2010 on my windows xp sp2 computer. But during the installation, we recommend that I needed sp3 to move forward. Is it possible if I get the windows xp disk that contains windows xp sp3 and upgrade my computer to sp3. Because the size of the service pack is huge in size in the microsoft Web site. I just want to know if I can upgrade my computer to sp3 using a disc of windows xp sp3.

  Hi Roland, Mathurin

  With the help of CD which has Windows XP with SP3 integrated must be in a clean install and this results in the loss of data and applications.

  The recommended way to upgrade your computer to SP3 therefore you download SP 3 and install or use a CD that has SP3 standalone.

  Let me know if you have any other questions.

  Kind regards

  Vinod gwenaëlle.

  The forum moderator.

• Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Disconnect all USB storage.

  Run this tool by do right click and choose 'run as administrator '.

  Of course, all first extract it:

  http://www.Uwe-Sieber.de/files/drivecleanup.zip

  If your XP is 32 bits, use the Win32 folder.

  Reset.

  If you still can't find the drive, assign it a drive letter in disk management.

• The family pack license question

  I brought the family pack and installed the 32 bit on one of my computers.  But I can change my mind and want to go to 64-bit in a couple of weeks after I receive a problem or two fixed. Besides all the obvious problems with going from 32 to 64.  SE coward a license by installing two different versions on the same computer?

  Hi Jer1177,

  Thanks for posting. You can install the 64-bit without any problems, as long as your 32 bit OS is uninstalled. If you run no activation questions use the phone activation and you can enable by this means.

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Install on the new instance of SCOM 2012 Dell management packs, questions...

  I was given a task to install SCOM 2012 to monitor a lot of servers, including Dell.  Problem that I am running is when I try to install the Dell Management Pack, it keeps asking me for the Dell device to support COM + user/pass.  I put in the account to use us to access these machines, but it does not work.  I tried a few other user/pass, but nothing seems to work.  I'm really new to Dell servers (first time I'm doing business with them) so not sure what is the problem.  I can't find the good research to find a solution to this problem.

  Can anyone offer some advice?

  I apologize in advance if I forget something obvious.

  Hello

  To extract members without providing identification of the AD information, you can run the Setup program on your desktop computer / laptop (no Windows Server version). The credentials of the AD are required for the configuration of a DLL, which is necessary for servers using WS - MAN (called Out-Of-Band followed in the product documentation).

  Hope that this unlocks and allows you to proceed with your installation.

  Concerning

  Thomas

  PS I work for Dell MP development team.

  If you have more questions focus on the MP, for a faster response, please report it on http://en.community.dell.com/techcenter/systems-management/f/4670.aspx (the forum integrations with Microsoft SCCM and SCOM OpenManage )

• I have Microsoft Windows 7 Professional with Service Pack 1 64-bit (English) - DreamSpark... I'm looking for the answers to a few questions

  I am a student and I got Microsoft Windows 7 Professional with Service Pack 1 64-bit (English) - DreamSpark
  I have a few questions
  1 - can I install and activate it on my laptop and desktop at the same time?
  2-How many times can I activate it?

  I am a student and I got Microsoft Windows 7 Professional with Service Pack 1 64-bit (English) - DreamSpark
  I have a few questions
  1 - can I install and activate it on my laptop and desktop at the same time?

  No, 1 license, 1 computer.

  2-How many times can I activate it?

  You can reinstall and reactivate on the same machine as many times as you want. You may need to reactivate by phone after the 5th time.

• Fresh paint - Questions on the mixture of colors and model packs

  Hi all

  I have 2 questions for fresh paint where I can not find an answer for.

  1. own models

  Fresh paint offers to buy packs of model that can be used for painting. I have a few models that I would use it as well. I know, it is possible to open an image and paint it, but there is a big difference. Models that are offered by the application itself have a big advantage - with a special button (showing a few mountains & Sun) to within the application, you can enable / disable the view to the model (which in fact becomes visible or hidden) as a kind of layer, so you can easily check your paint with and without the model. Is it possible to do both for own patterns / Images? When I used my own jpeg file 'mountains' button is not available.

  2 using the palette color mixing and putting them in one of the holes tiny 'color selector' on this issue - how is this possible and how can such color to delete as well?

  I would really like to know how the colors can be mixed / saved / deleted using (the Palette on). Sometimes, when I mixed 2 colors and used in my painting, the color is not yet available in the Palette itself for easy reuse, sometimes it will fill one of the spots on it, however for me ist currently unclear in this case - which makes it unpredictable. Will there be some indications on how to use the color scheme and its functions?

  Thank you very much

  André

  Hi all

  I have 2 questions for fresh paint where I can not find an answer for.

  1. own models

  Fresh paint offers to buy packs of model that can be used for painting. I have a few models that I would use it as well. I know, it is possible to open an image and paint it, but there is a big difference. Models that are offered by the application itself have a big advantage - with a special button (showing a few mountains & Sun) to within the application, you can enable / disable the view to the model (which in fact becomes visible or hidden) as a kind of layer, so you can easily check your paint with and without the model. Is it possible to do both for own patterns / Images? When I used my own jpeg file 'mountains' button is not available.

  2 using the palette color mixing and putting them in one of the holes tiny 'color selector' on this issue - how is this possible and how can such color to delete as well?

  I would really like to know how the colors can be mixed / saved / deleted using (the Palette on). Sometimes, when I mixed 2 colors and used in my painting, the color is not yet available in the Palette itself for easy reuse, sometimes it will fill one of the spots on it, however for me ist currently unclear in this case - which makes it unpredictable. Will there be some indications on how to use the color scheme and its functions?

  Thank you very much

  André

  Hello Andrew,.

  At this time, "Own Templates" are not supported.  This is a feature that is only supported for activity Packs that are published.

  Mixing of colors, custom colors mix you are only saved if you use somewhere in your paint.  Then, they are automatically saved in your palette.  Your custom palette is only applicable to an individual work you created with it.  There is no need to remove the colors we provide a long list, you can scroll through directly under the area of mixture.

  You can reposition your palette customized by drag-and - drop colors between the lodges on the palette.  This allows to reposition some colors in your well static tasks.  Well custom tasks will be to repopulate it based on the most frequently used colors.

• Question about the cloud creative business pack

  Hi, my question is about Creative Cloud for business, I want some practical information. Is the license to the company pack all the apps 'Creative cloud' work for a single computer or it could be used for many computer positions?

  A team plan includes as many seats as you want to buy

  Team license links that can help

  - https://creative.adobe.com/plans?plan=team team plans

  -http://www.adobe.com/creativecloud/buy/business.html

  -https://helpx.adobe.com/contact/creative-cloud-teams.html using the team

  -manage your account http://forums.adobe.com/thread/1460939?tstart=0 team

  -Team Installer http://forums.adobe.com/thread/1363686?tstart=0

• Content question Pack Microsoft Active Directory

  So I installed the pack content for Microsoft Active Directory, and it works well for what it was designed for.

  Would it not possible to add another article for the surveillance of the integrity of the file? It is a requirement for PCI compliance and would be a great addition to this content back dashboard!

  Thought I would ask here before you request a feature, to see if it could possibly be just added to the fly ;-)

  OK, the content of Windows pack has been updated to include the auditing of objects! Please take a look and reply back with any feedback. If this answers your question could you please mark it as answered? Thanks for the comments!

• Satellite A30: question about XP service pack update

  I have a satellite A30 2.80 ghz - and that you have recently purchased a midi keyboard, but unfortunately you have XP (SP2).
  I only have xp. My computer works fine if I download the SP2 version as I've heard that it doesn't always.

  Don t worry, the next service pack SP3 is released and believe me: it s better to have a service pack installed, and then nothing. Just don't hesitate and update your system, it will work... MUST work ;)

  Welcome them

• Question about the Vista Service Pack

  y at - it an accumliation of updates to windows vista Home premium which can be installed one.

  benjaminsl

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791/

  You have Service Pack 1 and Service Pack 2, then you have to do the updates after SP2.

  So it's all in an update.

  You can save the service packs where you need them again for resettlement.

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.